Authentication and authorization

You are currently viewing the documentation for Vert.x 4.1.8. Visit the latest version of this page.

JWT Auth provider

This component contains an out of the box a JWT implementation. To use this project, add the following dependency to the dependencies section of your build descriptor:

Maven (in your pom.xml):

<dependency>
 <groupId>io.vertx</groupId>
 <artifactId>vertx-auth-jwt</artifactId>
 <version>4.1.8</version>
</dependency>

Gradle (in your build.gradle file):

compile 'io.vertx:vertx-auth-jwt:4.1.8'

JSON Web Token is a simple way to send information in the clear (usually in a URL) whose contents can be verified to be trusted. JWT are well suited for scenarios as:

In a Single Sign-On scenario where you want a separate authentication server that can then send user information in a trusted way.
Stateless API servers, very well suited for single page applications.
etc…

Before deciding on using JWT, it’s important to note that JWT does not encrypt the payload, it only signs it. You should not send any secret information using JWT, rather you should send information that is not secret but needs to be verified. For instance, sending a signed user id to indicate the user that should be logged in would work great! Sending a user’s password would be very, very bad.

Its main advantages are:

It allows you to verify token authenticity.
It has a json body to contain any variable amount of data you want.
It’s completely stateless.

To create an instance of the provider you use JWTAuth. You specify the configuration in a JSON object.

Here’s an example of creating a JWT auth provider:

JWTAuthOptions config = new JWTAuthOptions()
  .setKeyStore(new KeyStoreOptions()
    .setPath("keystore.jceks")
    .setPassword("secret"));

AuthenticationProvider provider = JWTAuth.create(vertx, config);

A typical flow of JWT usage is that in your application you have one end point that issues tokens, this end point should be running in SSL mode, there after you verify the request user, say by its username and password you would do:

JWTAuthOptions config = new JWTAuthOptions()
  .setKeyStore(new KeyStoreOptions()
    .setPath("keystore.jceks")
    .setPassword("secret"));

JWTAuth provider = JWTAuth.create(vertx, config);

// on the verify endpoint once you verify the identity
// of the user by its username/password
if ("paulo".equals(username) && "super_secret".equals(password)) {
  String token = provider.generateToken(
    new JsonObject().put("sub", "paulo"), new JWTOptions());

  // now for any request to protected resources you should
  // pass this string in the HTTP header Authorization as:
  // Authorization: Bearer <token>
}

Loading Keys

Loading keys can be performed in 3 different ways:

Using secrets (symmetric keys)
Using OpenSSL pem formatted files (pub/sec keys)
Using Java Keystore files (both symmetric and pub/sec keys)

Using Symmetric Keys

The default signature method for JWT’s is known as HS256. HS stands in this case for HMAC Signature using SHA256.

This is the simplest key to load. All you need is a secret that is shared between you and the 3rd party, for example assume that the secret is: keyboard cat then you can configure your Auth as:

JWTAuth provider = JWTAuth.create(vertx, new JWTAuthOptions()
  .addPubSecKey(new PubSecKeyOptions()
    .setAlgorithm("HS256")
    .setBuffer("keyboard cat")));

String token = provider.generateToken(new JsonObject());

In this case the secret is configured as a public key, as it is a token that is known to both parties and you configure your PubSec key as being symmetric.

Using RSA keys

This section is by no means a manual on OpenSSL and a read on OpenSSL command line usage is advised. We will cover how to generate the most common keys and how to use them with JWT auth.

Imagine that you would like to protect your application using the very common RS256 JWT algorithm. Contrary to some belief, 256 is not the key length but the hashing algorithm signature length. Any RSA key can be used with this JWT algorithm. Here is an information table:

"alg" Param Value	Digital Signature Algorithm
RS256	RSASSA-PKCS1-v1_5 using SHA-256
RS384	RSASSA-PKCS1-v1_5 using SHA-384
RS512	RSASSA-PKCS1-v1_5 using SHA-512

"alg" Param Value

Digital Signature Algorithm

RS256

RSASSA-PKCS1-v1_5 using SHA-256

RS384

RSASSA-PKCS1-v1_5 using SHA-384

RS512

RSASSA-PKCS1-v1_5 using SHA-512

If you would like to generate a 2048bit RSA key pair, then you would do (please remember not to add a passphrase otherwise you will not be able to read the private key in the JWT auth):

openssl genrsa -out private.pem 2048

You can observe that the key is correct as the file content is similar to this:

-----BEGIN RSA PRIVATE KEY-----
MIIEowIBAAKCAQEAxPSbCQY5mBKFDIn1kggvWb4ChjrctqD4nFnJOJk4mpuZ/u3h
...
e4k0yN3F1J1DVlqYWJxaIMzxavQsi9Hz4p2JgyaZMDGB6kGixkMo
-----END RSA PRIVATE KEY-----

The standard JDK cannot read this file as is, so we must convert it to PKCS8 format first:

openssl pkcs8 -topk8 -inform PEM -in private.pem -out private_key.pem -nocrypt

Now the new file private_key.pem which resembles the original one contains:

-----BEGIN PRIVATE KEY-----
MIIEvQIBADANBgkqhkiG9w0BAQEFAASCBKcwggSjAgEAAoIBAQDE9JsJBjmYEoUM
...
0fPinYmDJpkwMYHqQaLGQyg=
-----END PRIVATE KEY-----

If we are verifying tokens only (you will only need the private_key.pem file) however at some point you will need to issue tokens too, so you will a public key. In this case you need to extract the public key from the private key file:

openssl rsa -in private.pem -outform PEM -pubout -out public.pem

And you should see that the content of the file is similar to this:

-----BEGIN PUBLIC KEY-----
MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAxPSbCQY5mBKFDIn1kggv
...
qwIDAQAB
-----END PUBLIC KEY-----

Now you can use this to issue or validate tokens:

JWTAuth provider = JWTAuth.create(vertx, new JWTAuthOptions()
  .addPubSecKey(new PubSecKeyOptions()
    .setAlgorithm("RS256")
    .setBuffer(
      "-----BEGIN PUBLIC KEY-----\n" +
        "MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAxPSbCQY5mBKFDIn1kggv\n" +
        "Wb4ChjrctqD4nFnJOJk4mpuZ/u3h2ZgeKJJkJv8+5oFO6vsEwF7/TqKXp0XDp6IH\n" +
        "byaOSWdkl535rCYR5AxDSjwnuSXsSp54pvB+fEEFDPFF81GHixepIbqXCB+BnCTg\n" +
        "N65BqwNn/1Vgqv6+H3nweNlbTv8e/scEgbg6ZYcsnBBB9kYLp69FSwNWpvPmd60e\n" +
        "3DWyIo3WCUmKlQgjHL4PHLKYwwKgOHG/aNl4hN4/wqTixCAHe6KdLnehLn71x+Z0\n" +
        "SyXbWooftefpJP1wMbwlCpH3ikBzVIfHKLWT9QIOVoRgchPU3WAsZv/ePgl5i8Co\n" +
        "qwIDAQAB\n" +
        "-----END PUBLIC KEY-----"))
  .addPubSecKey(new PubSecKeyOptions()
    .setAlgorithm("RS256")
    .setBuffer(
      "-----BEGIN PRIVATE KEY-----\n" +
        "MIIEvQIBADANBgkqhkiG9w0BAQEFAASCBKcwggSjAgEAAoIBAQDE9JsJBjmYEoUM\n" +
        "ifWSCC9ZvgKGOty2oPicWck4mTiam5n+7eHZmB4okmQm/z7mgU7q+wTAXv9Oopen\n" +
        "RcOnogdvJo5JZ2SXnfmsJhHkDENKPCe5JexKnnim8H58QQUM8UXzUYeLF6khupcI\n" +
        "H4GcJOA3rkGrA2f/VWCq/r4fefB42VtO/x7+xwSBuDplhyycEEH2Rgunr0VLA1am\n" +
        "8+Z3rR7cNbIijdYJSYqVCCMcvg8cspjDAqA4cb9o2XiE3j/CpOLEIAd7op0ud6Eu\n" +
        "fvXH5nRLJdtaih+15+kk/XAxvCUKkfeKQHNUh8cotZP1Ag5WhGByE9TdYCxm/94+\n" +
        "CXmLwKirAgMBAAECggEAeQ+M+BgOcK35gAKQoklLqZLEhHNL1SnOhnQd3h84DrhU\n" +
        "CMF5UEFTUEbjLqE3rYGP25mdiw0ZSuFf7B5SrAhJH4YIcZAO4a7ll23zE0SCW+/r\n" +
        "zr9DpX4Q1TP/2yowC4uGHpBfixxpBmVljkWnai20cCU5Ef/O/cAh4hkhDcHrEKwb\n" +
        "m9nymKQt06YnvpCMKoHDdqzfB3eByoAKuGxo/sbi5LDpWalCabcg7w+WKIEU1PHb\n" +
        "Qi+RiDf3TzbQ6TYhAEH2rKM9JHbp02TO/r3QOoqHMITW6FKYvfiVFN+voS5zzAO3\n" +
        "c5X4I+ICNzm+mnt8wElV1B6nO2hFg2PE9uVnlgB2GQKBgQD8xkjNhERaT7f78gBl\n" +
        "ch15DRDH0m1rz84PKRznoPrSEY/HlWddlGkn0sTnbVYKXVTvNytKSmznRZ7fSTJB\n" +
        "2IhQV7+I0jeb7pyLllF5PdSQqKTk6oCeL8h8eDPN7awZ731zff1AGgJ3DJXlRTh/\n" +
        "O6zj9nI8llvGzP30274I2/+cdwKBgQDHd/twbiHZZTDexYewP0ufQDtZP1Nk54fj\n" +
        "EpkEuoTdEPymRoq7xo+Lqj5ewhAtVKQuz6aH4BeEtSCHhxy8OFLDBdoGCEd/WBpD\n" +
        "f+82sfmGk+FxLyYkLxHCxsZdOb93zkUXPCoCrvNRaUFO1qq5Dk8eftGCdC3iETHE\n" +
        "6h5avxHGbQKBgQCLHQVMNhL4MQ9slU8qhZc627n0fxbBUuhw54uE3s+rdQbQLKVq\n" +
        "lxcYV6MOStojciIgVRh6FmPBFEvPTxVdr7G1pdU/k5IPO07kc6H7O9AUnPvDEFwg\n" +
        "suN/vRelqbwhufAs85XBBY99vWtxdpsVSt5nx2YvegCgdIj/jUAU2B7hGQKBgEgV\n" +
        "sCRdaJYr35FiSTsEZMvUZp5GKFka4xzIp8vxq/pIHUXp0FEz3MRYbdnIwBfhssPH\n" +
        "/yKzdUxcOLlBtry+jgo0nyn26/+1Uyh5n3VgtBBSePJyW5JQAFcnhqBCMlOVk5pl\n" +
        "/7igiQYux486PNBLv4QByK0gV0SPejDzeqzIyB+xAoGAe5if7DAAKhH0r2M8vTkm\n" +
        "JvbCFjwuvhjuI+A8AuS8zw634BHne2a1Fkvc8c3d9VDbqsHCtv2tVkxkKXPjVvtB\n" +
        "DtzuwUbp6ebF+jOfPK0LDuJoTdTdiNjIcXJ7iTTI3cXUnUNWWphYnFogzPFq9CyL\n" +
        "0fPinYmDJpkwMYHqQaLGQyg=\n" +
        "-----END PRIVATE KEY-----")
  ));

String token = provider.generateToken(
  new JsonObject().put("some", "token-data"),
  new JWTOptions().setAlgorithm("RS256"));

Using EC keys

Elliptic Curve keys are also supported, however the default JDK has some limitations on the features that can be used.

The usage is very similar to RSA, first you create a private key:

openssl ecparam -name secp256r1 -genkey -out private.pem

So you will get something similar to this:

However the JDK prefers PKCS8 format so we must convert:

openssl pkcs8 -topk8 -nocrypt -in private.pem -out private_key.pem

Which will give you a key similar to this:

Using the private key you can already generate tokens:

JWTAuth provider = JWTAuth.create(vertx, new JWTAuthOptions()
  .addPubSecKey(new PubSecKeyOptions()
    .setAlgorithm("ES256")
    .setBuffer(
      "-----BEGIN PRIVATE KEY-----\n" +
        "MIGHAgEAMBMGByqGSM49AgEGCCqGSM49AwEHBG0wawIBAQQgeRyEfU1NSHPTCuC9\n" +
        "rwLZMukaWCH2Fk6q5w+XBYrKtLihRANCAAStpUnwKmSvBM9EI+W5QN3ALpvz6bh0\n" +
        "SPCXyz5KfQZQuSj4f3l+xNERDUDaygIUdLjBXf/bc15ur2iZjcq4r0Mr\n" +
        "-----END PRIVATE KEY-----\n")
  ));

String token = provider.generateToken(
  new JsonObject(),
  new JWTOptions().setAlgorithm("ES256"));

So in order to validate the tokens you will need a public key:

openssl ec -in private.pem -pubout -out public.pem

So you can do all operations with it:

JWTAuth provider = JWTAuth.create(vertx, new JWTAuthOptions()
  .addPubSecKey(new PubSecKeyOptions()
    .setAlgorithm("ES256")
    .setBuffer(
      "-----BEGIN PUBLIC KEY-----\n" +
        "MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAEraVJ8CpkrwTPRCPluUDdwC6b8+m4\n" +
        "dEjwl8s+Sn0GULko+H95fsTREQ1A2soCFHS4wV3/23Nebq9omY3KuK9DKw==\n" +
        "-----END PUBLIC KEY-----"))
  .addPubSecKey(new PubSecKeyOptions()
    .setAlgorithm("RS256")
    .setBuffer(
      "-----BEGIN PRIVATE KEY-----\n" +
        "MIGHAgEAMBMGByqGSM49AgEGCCqGSM49AwEHBG0wawIBAQQgeRyEfU1NSHPTCuC9\n" +
        "rwLZMukaWCH2Fk6q5w+XBYrKtLihRANCAAStpUnwKmSvBM9EI+W5QN3ALpvz6bh0\n" +
        "SPCXyz5KfQZQuSj4f3l+xNERDUDaygIUdLjBXf/bc15ur2iZjcq4r0Mr")
  ));

String token = provider.generateToken(
  new JsonObject(),
  new JWTOptions().setAlgorithm("ES256"));

The JWT keystore file

If you prefer to use Java Keystores, then you can do it either.

This auth provider requires a keystore in the classpath or in the filesystem with either a javax.crypto.Mac or a java.security.Signature in order to sign and verify the generated tokens.

The implementation will, by default, look for the following aliases, however not all are required to be present. As a good practice HS256 should be present:

`HS256`:: HMAC using SHA-256 hash algorithm
`HS384`:: HMAC using SHA-384 hash algorithm
`HS512`:: HMAC using SHA-512 hash algorithm
`RS256`:: RSASSA using SHA-256 hash algorithm
`RS384`:: RSASSA using SHA-384 hash algorithm
`RS512`:: RSASSA using SHA-512 hash algorithm
`ES256`:: ECDSA using P-256 curve and SHA-256 hash algorithm
`ES384`:: ECDSA using P-384 curve and SHA-384 hash algorithm
`ES512`:: ECDSA using P-521 curve and SHA-512 hash algorithm

When no keystore is provided the implementation falls back in unsecure mode and signatures will not be verified, this is useful for the cases where the payload if signed and or encrypted by external means.

Key pairs stored on a keystore always include a certificate. The validity of the certificate is tested on load and keys will not be loaded if either expired or not yet valid to be use.

All keys algorithms will be checked if can be matched to the given alias. For example an RS256 key will not be loaded if issued with a EC algorithm, or if issued with RSA but signature SHA1WithRSA instead of SHA256WithRSA.

Generate a new Keystore file

The only required tool to generate a keystore file is keytool, you can now specify which algorithms you need by running:

keytool -genseckey -keystore keystore.jceks -storetype jceks -storepass secret -keyalg HMacSHA256 -keysize 2048 -alias HS256 -keypass secret
keytool -genseckey -keystore keystore.jceks -storetype jceks -storepass secret -keyalg HMacSHA384 -keysize 2048 -alias HS384 -keypass secret
keytool -genseckey -keystore keystore.jceks -storetype jceks -storepass secret -keyalg HMacSHA512 -keysize 2048 -alias HS512 -keypass secret
keytool -genkey -keystore keystore.jceks -storetype jceks -storepass secret -keyalg RSA -keysize 2048 -alias RS256 -keypass secret -sigalg SHA256withRSA -dname "CN=,OU=,O=,L=,ST=,C=" -validity 360
keytool -genkey -keystore keystore.jceks -storetype jceks -storepass secret -keyalg RSA -keysize 2048 -alias RS384 -keypass secret -sigalg SHA384withRSA -dname "CN=,OU=,O=,L=,ST=,C=" -validity 360
keytool -genkey -keystore keystore.jceks -storetype jceks -storepass secret -keyalg RSA -keysize 2048 -alias RS512 -keypass secret -sigalg SHA512withRSA -dname "CN=,OU=,O=,L=,ST=,C=" -validity 360
keytool -genkeypair -keystore keystore.jceks -storetype jceks -storepass secret -keyalg EC -keysize 256 -alias ES256 -keypass secret -sigalg SHA256withECDSA -dname "CN=,OU=,O=,L=,ST=,C=" -validity 360
keytool -genkeypair -keystore keystore.jceks -storetype jceks -storepass secret -keyalg EC -keysize 384 -alias ES384 -keypass secret -sigalg SHA384withECDSA -dname "CN=,OU=,O=,L=,ST=,C=" -validity 360
keytool -genkeypair -keystore keystore.jceks -storetype jceks -storepass secret -keyalg EC -keysize 521 -alias ES512 -keypass secret -sigalg SHA512withECDSA -dname "CN=,OU=,O=,L=,ST=,C=" -validity 360

For more information on keystores and how to use the PKCS12 format (Default from Java >=9) please see the documentation of the common module.

Read only tokens

If you need to consume JWT tokens issues by third parties you probably won’t have the private key with you, in that case all you need to have is a public key im PEM format.

JWTAuthOptions config = new JWTAuthOptions()
  .addPubSecKey(new PubSecKeyOptions()
    .setAlgorithm("RS256")
    .setBuffer("BASE64-ENCODED-PUBLIC_KEY"));

AuthenticationProvider provider = JWTAuth.create(vertx, config);

AuthN/AuthZ with JWT

A common scenario when developing for example micro services is that you want you application to consume APIs. These api’s are not meant to be consumed by humans so we should remove all the interactive part of authenticating the consumer out of the picture.

In this scenario one can use HTTP as the protocol to consume this API and the HTTP protocol already defines that there is a header Authorization that should be used for passing authorization information. In most cases you will see that tokens are sent as bearer tokens, i.e.: Authorization: Bearer some+base64+string.

Authenticating (AuthN)

For this provider a user is authenticated if the token passes the signature checks and that the token is not expired. For this reason it is imperative that private keys are kept private and not copy pasted across project since it would be a security hole.

jwtAuth.authenticate(new JsonObject().put("token", "BASE64-ENCODED-STRING"))
  .onSuccess(user -> System.out.println("User: " + user.principal()))
  .onFailure(err -> {
    // Failed!
  });

In a nutshell the provider is checking for several things:

token signature is valid against internal private key
fields: exp, iat, nbf, audience, issuer are valid according to the config

If all these are valid then the token is considered good and a user object is returned.

While the fields exp, iat and nbf are simple timestamp checks only exp can be configured to be ignored:

jwtAuth.authenticate(
  new JsonObject()
    .put("token", "BASE64-ENCODED-STRING")
    .put("options", new JsonObject()
      .put("ignoreExpiration", true)))
  .onSuccess(user -> System.out.println("User: " + user.principal()))
  .onFailure(err -> {
    // Failed!
  });

In order to verify the aud field one needs to pass the options like before:

jwtAuth.authenticate(
  new JsonObject()
    .put("token", "BASE64-ENCODED-STRING")
    .put("options", new JsonObject()
      .put("audience", new JsonArray().add("[email protected]"))))
  .onSuccess(user -> System.out.println("User: " + user.principal()))
  .onFailure(err -> {
    // Failed!
  });

And the same for the issuer:

jwtAuth.authenticate(
  new JsonObject()
    .put("token", "BASE64-ENCODED-STRING")
    .put("options", new JsonObject()
      .put("issuer", "mycorp.com")))
  .onSuccess(user -> System.out.println("User: " + user.principal()))
  .onFailure(err -> {
    // Failed!
  });

Authorizing (AuthZ)

Once a token is parsed and is valid we can use it to perform authorization tasks. The most simple is to verify if a user has a specific authority. Authorization will follow the common AuthorizationProvider API. Choose the provider that generated your token and evaluate.

Currently there are 2 factories:

JWTAuthorization inspects tokens based on the "permissions" claim key.
MicroProfileAuthorization inspects tokens based on the <a href="https://www.eclipse.org/community/eclipse_newsletter/2017/september/article2.php">MP JWT spec</a>.

The typical usage is to extract the permissions form the user object using the provider and perform the attestation:

AuthorizationProvider authz = MicroProfileAuthorization.create();

authz.getAuthorizations(user)
  .onSuccess(v -> {
    // and now we can perform checks as needed
    if (PermissionBasedAuthorization.create("create-report").match(user)) {
      // Yes the user can create reports
    }
  });

By default the provider will lookup under the key permissions but like the other providers one can extend the concept to authorities to roles by using the : as a splitter, so role:authority can be used to lookup the token.

Since JWT are quite free form and there is no standard on where to lookup for the claims the location can be configured to use something else than permissions, for example one can even lookup under a path like this:

JsonObject config = new JsonObject()
  .put("public-key", "BASE64-ENCODED-PUBLIC_KEY")
  // since we're consuming keycloak JWTs we need
  // to locate the permission claims in the token
  .put("permissionsClaimKey", "realm_access/roles");

AuthenticationProvider provider =
  JWTAuth.create(vertx, new JWTAuthOptions(config));

So in this example we configure the JWT to work with Keycloak token format. In this case the claims will be checked under the path realm_access/roles rather than permissions.

Validating Tokens

When the method authenticate is invoked, the token is validated against the JWTOptions provided during the initialization. The validation performs the following steps:

if ignoreExpiration (default is false) is false then the token is checked for expiration, this will check the fields: exp, iat and nbf. Since sometimes clocks are not reliable, it is possible to configure some leeway to be applied to the dates so we allow some grace period if the dates are outside the required limits.
if audience is provided, then the token aud is checked against the configured one and all configured audiences must be in the token.
if issuer is configured, then the tokens iss is checked against the configured one.

Once these validations complete a JWTUser object is then returned, the object is configured with a reference to the permission claims key provided in the configuration. This value is used later when doing authorization. The value corresponds to the json path where authorities should be checked.

Customizing Token Generation

In the same way tokens are validated, the generation is initially configured during the initialization.

When generating a token an optional extra parameter can be supplied to control the token generation, this is a JWTOptions object. The token signature algorithm (default HS256) can be configured using the property algorithm. In this case a lookup for a key that corresponds to the algorithm is performed and used to sign.

Token headers can be added by specifying any extra headers to be merged with the default ones using the options headers property.

Sometimes it might be useful to issue tokens without a timestamp (test, development time for example) in this case the property noTimestamp should be set to true (default false). This means that there is no iat field in the token.

Token expiration is controlled by the property expiresInSeconds, by default there is no expiration. Other control fields audience, issuer and subject are then picked from the config is available and added to the token metadata.

Finally the token is signed and encoded in the correct format.

Oauth2

Webauthn