| Modifier and Type | Method and Description |
|---|---|
AmqpConnection |
AmqpConnection.close(Handler<AsyncResult<Void>> done)
Closes the AMQP connection, i.e.
|
void |
AmqpSender.close(Handler<AsyncResult<Void>> handler)
Closes the sender.
|
void |
AmqpReceiver.close(Handler<AsyncResult<Void>> handler)
Closes the receiver.
|
AmqpClient |
AmqpClient.connect(Handler<AsyncResult<AmqpConnection>> connectionHandler)
Connects to the AMQP broker or router.
|
AmqpConnection |
AmqpConnection.createAnonymousSender(Handler<AsyncResult<AmqpSender>> completionHandler)
Creates an anonymous sender.
|
AmqpConnection |
AmqpConnection.createDynamicReceiver(Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a dynamic receiver.
|
AmqpConnection |
AmqpConnection.createReceiver(String address,
AmqpReceiverOptions receiverOptions,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consumer messages from the given address.
|
AmqpClient |
AmqpClient.createReceiver(String address,
AmqpReceiverOptions receiverOptions,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consumer messages from the given address.
|
AmqpConnection |
AmqpConnection.createReceiver(String address,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consume messages from the given address.
|
AmqpClient |
AmqpClient.createReceiver(String address,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consume messages from the given address.
|
AmqpConnection |
AmqpConnection.createSender(String address,
AmqpSenderOptions options,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpClient |
AmqpClient.createSender(String address,
AmqpSenderOptions options,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpConnection |
AmqpConnection.createSender(String address,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpClient |
AmqpClient.createSender(String address,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpSender |
AmqpSender.sendWithAck(AmqpMessage message,
Handler<AsyncResult<Void>> acknowledgementHandler)
Sends an AMQP message and waits for an acknowledgement.
|
| Modifier and Type | Method and Description |
|---|---|
CamelBridge |
CamelBridge.start(Handler<AsyncResult<Void>> completed)
Starts the bridge.
|
CamelBridge |
CamelBridge.stop(Handler<AsyncResult<Void>> completed)
Stops the bridge.
|
| Modifier and Type | Method and Description |
|---|---|
ResultSet |
ResultSet.all(Handler<AsyncResult<List<com.datastax.oss.driver.api.core.cql.Row>>> handler)
The method should not be used concurrently with others like
ResultSet.fetchNextPage() or #one(Handler). |
CassandraClient |
CassandraClient.close(Handler<AsyncResult<Void>> closeHandler)
Closes this client.
|
<R> CassandraClient |
CassandraClient.execute(com.datastax.oss.driver.api.core.cql.Statement statement,
java.util.stream.Collector<com.datastax.oss.driver.api.core.cql.Row,?,R> collector,
Handler<AsyncResult<R>> resultHandler)
Execute a statement and produce a result by applying a collector to result set rows.
|
CassandraClient |
CassandraClient.execute(com.datastax.oss.driver.api.core.cql.Statement statement,
Handler<AsyncResult<ResultSet>> resultHandler)
Execute the statement and provide a handler for consuming results.
|
<R> CassandraClient |
CassandraClient.execute(String query,
java.util.stream.Collector<com.datastax.oss.driver.api.core.cql.Row,?,R> collector,
Handler<AsyncResult<R>> resultHandler)
Execute a query and produce a result by applying a collector to result set rows.
|
CassandraClient |
CassandraClient.execute(String query,
Handler<AsyncResult<ResultSet>> resultHandler)
Execute the query and provide a handler for consuming results.
|
CassandraClient |
CassandraClient.executeWithFullFetch(com.datastax.oss.driver.api.core.cql.Statement statement,
Handler<AsyncResult<List<com.datastax.oss.driver.api.core.cql.Row>>> resultHandler)
Execute the query and provide a handler for consuming results.
|
CassandraClient |
CassandraClient.executeWithFullFetch(String query,
Handler<AsyncResult<List<com.datastax.oss.driver.api.core.cql.Row>>> resultHandler)
Execute the query and provide a handler for consuming results.
|
void |
ResultSet.fetchNextPage(Handler<AsyncResult<ResultSet>> handler)
Like
ResultSet.fetchNextPage() but with a direct callback. |
void |
CassandraClient.metadata(Handler<AsyncResult<com.datastax.oss.driver.api.core.metadata.Metadata>> handler)
Get
Metadata for the session. |
default void |
CassandraRowStream.pipeTo(WriteStream<com.datastax.oss.driver.api.core.cql.Row> dst,
Handler<AsyncResult<Void>> handler) |
CassandraClient |
CassandraClient.prepare(com.datastax.oss.driver.api.core.cql.SimpleStatement statement,
Handler<AsyncResult<com.datastax.oss.driver.api.core.cql.PreparedStatement>> resultHandler)
Prepares the provided a
SimpleStatement. |
CassandraClient |
CassandraClient.prepare(String query,
Handler<AsyncResult<com.datastax.oss.driver.api.core.cql.PreparedStatement>> resultHandler)
Prepares the provided query string.
|
CassandraClient |
CassandraClient.queryStream(com.datastax.oss.driver.api.core.cql.Statement statement,
Handler<AsyncResult<CassandraRowStream>> rowStreamHandler)
Executes the given SQL statement which returns the results of the query as a read stream.
|
CassandraClient |
CassandraClient.queryStream(String sql,
Handler<AsyncResult<CassandraRowStream>> rowStreamHandler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
| Modifier and Type | Method and Description |
|---|---|
default <T> void |
CircuitBreaker.execute(Handler<Promise<T>> command,
Handler<AsyncResult<T>> handler)
Same as
CircuitBreaker.executeWithFallback(Handler, Function) but using the circuit breaker default fallback. |
default <T> void |
CircuitBreaker.executeWithFallback(Handler<Promise<T>> command,
java.util.function.Function<Throwable,T> fallback,
Handler<AsyncResult<T>> handler)
Same as
CircuitBreaker.executeWithFallback(Handler, Function) but using a callback. |
| Modifier and Type | Method and Description |
|---|---|
void |
ConfigRetriever.getConfig(Handler<AsyncResult<JsonObject>> completionHandler)
Reads the configuration from the different
ConfigStore
and computes the final configuration. |
| Modifier and Type | Method and Description |
|---|---|
default void |
ConfigStore.get(Handler<AsyncResult<Buffer>> completionHandler)
Deprecated.
implement
ConfigStore.get() instead |
default void |
ConfigProcessor.process(Vertx vertx,
JsonObject configuration,
Buffer input,
Handler<AsyncResult<JsonObject>> handler)
Deprecated.
implement
ConfigProcessor.process(Vertx, JsonObject, Buffer) instead |
| Modifier and Type | Method and Description |
|---|---|
void |
FileSet.buildConfiguration(List<File> files,
Handler<AsyncResult<JsonObject>> handler)
Iterates over the given set of files, and for each matching file, computes the resulting configuration.
|
| Modifier and Type | Method and Description |
|---|---|
static <T> AsyncResult<T> |
VaultException.toFailure(String message) |
static <T> AsyncResult<T> |
VaultException.toFailure(String status,
int code,
String body) |
static <T> AsyncResult<T> |
VaultException.toFailure(String message,
Throwable cause) |
| Modifier and Type | Method and Description |
|---|---|
void |
SlimVaultClient.createToken(TokenRequest tokenRequest,
Handler<AsyncResult<Auth>> resultHandler)
Creates a new token.
|
void |
SlimVaultClient.delete(String path,
Handler<AsyncResult<Void>> resultHandler)
Deletes a secret from `path`.
|
void |
SlimVaultClient.list(String path,
Handler<AsyncResult<List<String>>> resultHandler)
Lists secrets from path (children).
|
void |
SlimVaultClient.loginWithAppRole(String roleId,
String secretId,
Handler<AsyncResult<Auth>> resultHandler)
Logs in against the `AppRole` backend.
|
void |
SlimVaultClient.loginWithCert(Handler<AsyncResult<Auth>> resultHandler)
Logs in against the `Cert` backend.
|
void |
SlimVaultClient.loginWithUserCredentials(String username,
String password,
Handler<AsyncResult<Auth>> resultHandler)
Logs in against the `userpass` backend.
|
void |
SlimVaultClient.lookupSelf(Handler<AsyncResult<Lookup>> resultHandler)
Looks up for the current token metadata.
|
void |
SlimVaultClient.read(String path,
Handler<AsyncResult<Secret>> responseHandler)
Reads a secret from `path`.
|
void |
SlimVaultClient.renewSelf(long leaseDurationInSecond,
Handler<AsyncResult<Auth>> resultHandler)
Renews the current token.
|
void |
SlimVaultClient.write(String path,
JsonObject secrets,
Handler<AsyncResult<Secret>> resultHandler)
Write a secret to `path`.
|
| Modifier and Type | Interface and Description |
|---|---|
interface |
CompositeFuture
The composite future wraps a list of
futures, it is useful when several futures
needs to be coordinated. |
interface |
Future<T>
Represents the result of an action that may, or may not, have occurred yet.
|
interface |
Timer
A timer task that can be used as a future.
|
| Modifier and Type | Method and Description |
|---|---|
default <U> AsyncResult<U> |
AsyncResult.map(java.util.function.Function<T,U> mapper)
Apply a
mapper function on this async result. |
default <V> AsyncResult<V> |
AsyncResult.map(V value)
Map the result of this async result to a specific
value. |
default <V> AsyncResult<V> |
AsyncResult.mapEmpty()
Map the result of this async result to
null. |
default AsyncResult<T> |
AsyncResult.otherwise(java.util.function.Function<Throwable,T> mapper)
Apply a
mapper function on this async result. |
default AsyncResult<T> |
AsyncResult.otherwise(T value)
Map the failure of this async result to a specific
value. |
default AsyncResult<T> |
AsyncResult.otherwiseEmpty()
Map the failure of this async result to
null. |
| Modifier and Type | Method and Description |
|---|---|
default void |
Promise.handle(AsyncResult<T> asyncResult)
Succeed or fail this promise with the
AsyncResult event. |
| Modifier and Type | Method and Description |
|---|---|
default Future<T> |
Future.andThen(Handler<AsyncResult<T>> handler)
Invokes the given
handler upon completion. |
default void |
VertxBuilder.buildClustered(Handler<AsyncResult<Vertx>> handler)
Creates a clustered instance.
|
void |
Vertx.close(Handler<AsyncResult<Void>> completionHandler)
Like
Vertx.close() but the completionHandler will be called when the close is complete |
void |
WorkerExecutor.close(Handler<AsyncResult<Void>> handler)
Close the executor.
|
static void |
Vertx.clusteredVertx(VertxOptions options,
Handler<AsyncResult<Vertx>> resultHandler)
Creates a clustered instance using the specified options.
|
void |
Vertx.deployVerticle(Class<? extends Verticle> verticleClass,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(Verticle, DeploymentOptions, Handler) but Verticle instance is created by
invoking the default constructor of verticleClass. |
void |
Vertx.deployVerticle(String name,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(String, Handler) but DeploymentOptions are provided to configure the
deployment. |
default void |
Vertx.deployVerticle(String name,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(String) but the completionHandler will be notified when the deployment is complete. |
void |
Vertx.deployVerticle(java.util.function.Supplier<Verticle> verticleSupplier,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(Verticle, DeploymentOptions, Handler) but Verticle instance is created by
invoking the verticleSupplier. |
void |
Vertx.deployVerticle(Verticle verticle,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(Verticle, Handler) but DeploymentOptions are provided to configure the
deployment. |
void |
Vertx.deployVerticle(Verticle verticle,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(Verticle) but the completionHandler will be notified when the deployment is complete. |
default <T> void |
Context.executeBlocking(Callable<T> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Like
Context.executeBlocking(Callable, boolean) but using a callback. |
default <T> void |
Vertx.executeBlocking(Callable<T> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Like
Vertx.executeBlocking(Callable, boolean) but using a callback. |
default <T> void |
WorkerExecutor.executeBlocking(Callable<T> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Like
WorkerExecutor.executeBlocking(Callable, boolean) but using a callback. |
default <T> void |
Context.executeBlocking(Callable<T> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Like
Context.executeBlocking(Callable) but using a callback. |
default <T> void |
Vertx.executeBlocking(Callable<T> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Like
Vertx.executeBlocking(Callable) but using a callback. |
default <T> void |
WorkerExecutor.executeBlocking(Callable<T> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Like
WorkerExecutor.executeBlocking(Callable) but using a callback. |
<T> void |
Context.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
instead use
Context.executeBlocking(Callable, boolean) |
default <T> void |
Vertx.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
use instead
Vertx.executeBlocking(Callable, boolean) |
<T> void |
WorkerExecutor.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
default <T> void |
Context.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
instead use
Context.executeBlocking(Callable) |
default <T> void |
Vertx.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
instead use
Vertx.executeBlocking(Callable) |
default <T> void |
WorkerExecutor.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
instead use
WorkerExecutor.executeBlocking(Callable) |
CompositeFuture |
CompositeFuture.onComplete(Handler<AsyncResult<CompositeFuture>> handler) |
Future<T> |
Future.onComplete(Handler<AsyncResult<T>> handler)
Add a handler to be notified of the result.
|
<U> Future<U> |
Future.transform(java.util.function.Function<AsyncResult<T>,Future<U>> mapper)
Transform this future with a
mapper functions. |
void |
Vertx.undeploy(String deploymentID,
Handler<AsyncResult<Void>> completionHandler)
Like
Vertx.undeploy(String) but the completionHandler will be notified when the undeployment is complete. |
| Modifier and Type | Method and Description |
|---|---|
DatagramSocket |
DatagramSocket.blockMulticastGroup(String multicastAddress,
String sourceToBlock,
Handler<AsyncResult<Void>> handler)
Block the given address for the given multicast address and notifies the
Handler once
the operation completes. |
DatagramSocket |
DatagramSocket.blockMulticastGroup(String multicastAddress,
String networkInterface,
String sourceToBlock,
Handler<AsyncResult<Void>> handler)
Block the given address for the given multicast address on the given network interface and notifies
the
Handler once the operation completes. |
void |
DatagramSocket.close(Handler<AsyncResult<Void>> handler)
Closes the
DatagramSocket implementation asynchronous
and notifies the handler once done. |
DatagramSocket |
DatagramSocket.listen(int port,
String host,
Handler<AsyncResult<DatagramSocket>> handler)
Start listening on the given port and host.
|
DatagramSocket |
DatagramSocket.listenMulticastGroup(String multicastAddress,
Handler<AsyncResult<Void>> handler)
Joins a multicast group and listens for packets send to it.
|
DatagramSocket |
DatagramSocket.listenMulticastGroup(String multicastAddress,
String networkInterface,
String source,
Handler<AsyncResult<Void>> handler)
Joins a multicast group and listens for packets send to it on the given network interface.
|
DatagramSocket |
DatagramSocket.send(Buffer packet,
int port,
String host,
Handler<AsyncResult<Void>> handler)
Write the given
Buffer to the SocketAddress. |
DatagramSocket |
DatagramSocket.send(String str,
int port,
String host,
Handler<AsyncResult<Void>> handler)
Write the given
String to the SocketAddress using UTF8 encoding. |
DatagramSocket |
DatagramSocket.send(String str,
String enc,
int port,
String host,
Handler<AsyncResult<Void>> handler)
Write the given
String to the SocketAddress using the given encoding. |
DatagramSocket |
DatagramSocket.unlistenMulticastGroup(String multicastAddress,
Handler<AsyncResult<Void>> handler)
Leaves a multicast group and stops listening for packets send to it.
|
DatagramSocket |
DatagramSocket.unlistenMulticastGroup(String multicastAddress,
String networkInterface,
String source,
Handler<AsyncResult<Void>> handler)
Leaves a multicast group and stops listening for packets send to it on the given network interface.
|
| Modifier and Type | Method and Description |
|---|---|
void |
DnsClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
DnsClient |
DnsClient.lookup(String name,
Handler<AsyncResult<String>> handler)
Try to lookup the A (ipv4) or AAAA (ipv6) record for the given name.
|
DnsClient |
DnsClient.lookup4(String name,
Handler<AsyncResult<String>> handler)
Try to lookup the A (ipv4) record for the given name.
|
DnsClient |
DnsClient.lookup6(String name,
Handler<AsyncResult<String>> handler)
Try to lookup the AAAA (ipv6) record for the given name.
|
DnsClient |
DnsClient.resolveA(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve all A (ipv4) records for the given name.
|
DnsClient |
DnsClient.resolveAAAA(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve all AAAA (ipv6) records for the given name.
|
DnsClient |
DnsClient.resolveCNAME(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve the CNAME record for the given name.
|
DnsClient |
DnsClient.resolveMX(String name,
Handler<AsyncResult<List<MxRecord>>> handler)
Try to resolve the MX records for the given name.
|
DnsClient |
DnsClient.resolveNS(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve the NS records for the given name.
|
DnsClient |
DnsClient.resolvePTR(String name,
Handler<AsyncResult<String>> handler)
Try to resolve the PTR record for the given name.
|
DnsClient |
DnsClient.resolveSRV(String name,
Handler<AsyncResult<List<SrvRecord>>> handler)
Try to resolve the SRV records for the given name.
|
DnsClient |
DnsClient.resolveTXT(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve the TXT records for the given name.
|
DnsClient |
DnsClient.reverseLookup(String ipaddress,
Handler<AsyncResult<String>> handler)
Try to do a reverse lookup of an IP address.
|
| Modifier and Type | Method and Description |
|---|---|
void |
MessageProducer.close(Handler<AsyncResult<Void>> handler)
Same as
MessageProducer.close() but with an handler called when the operation completes |
void |
MessageConsumer.completionHandler(Handler<AsyncResult<Void>> completionHandler)
Optional method which can be called to indicate when the registration has been propagated across the cluster.
|
default <R> void |
Message.replyAndRequest(Object message,
DeliveryOptions options,
Handler<AsyncResult<Message<R>>> replyHandler)
Like
Message.replyAndRequest(Object, Handler) but specifying options that can be used
to configure the delivery. |
default <R> void |
Message.replyAndRequest(Object message,
Handler<AsyncResult<Message<R>>> replyHandler)
Reply to this message, specifying a
replyHandler for the reply - i.e. |
default <T> EventBus |
EventBus.request(String address,
Object message,
DeliveryOptions options,
Handler<AsyncResult<Message<T>>> replyHandler)
Like
EventBus.request(String, Object, Handler) but specifying options that can be used to configure the delivery. |
default <T> EventBus |
EventBus.request(String address,
Object message,
Handler<AsyncResult<Message<T>>> replyHandler)
Sends a message and specify a
replyHandler that will be called if the recipient
subsequently replies to the message. |
void |
MessageConsumer.unregister(Handler<AsyncResult<Void>> completionHandler)
Unregisters the handler which created this registration
|
void |
MessageProducer.write(T body,
Handler<AsyncResult<Void>> handler)
Write a message to the event-bus, either sending or publishing.
|
| Modifier and Type | Method and Description |
|---|---|
FileSystem |
FileSystem.chmod(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Change the permissions on the file represented by
path to perms, asynchronously. |
FileSystem |
FileSystem.chmodRecursive(String path,
String perms,
String dirPerms,
Handler<AsyncResult<Void>> handler)
Change the permissions on the file represented by
path to perms, asynchronously. |
FileSystem |
FileSystem.chown(String path,
String user,
String group,
Handler<AsyncResult<Void>> handler)
Change the ownership on the file represented by
path to user and {code group}, asynchronously. |
void |
AsyncFile.close(Handler<AsyncResult<Void>> handler)
Close the file.
|
FileSystem |
FileSystem.copy(String from,
String to,
CopyOptions options,
Handler<AsyncResult<Void>> handler)
Copy a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.copy(String from,
String to,
Handler<AsyncResult<Void>> handler)
Copy a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.copyRecursive(String from,
String to,
boolean recursive,
Handler<AsyncResult<Void>> handler)
Copy a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.createFile(String path,
Handler<AsyncResult<Void>> handler)
Creates an empty file with the specified
path, asynchronously. |
FileSystem |
FileSystem.createFile(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Creates an empty file with the specified
path and permissions perms, asynchronously. |
FileSystem |
FileSystem.createTempDirectory(String prefix,
Handler<AsyncResult<String>> handler)
Creates a new directory in the default temporary-file directory, using the given
prefix to generate its name, asynchronously.
|
FileSystem |
FileSystem.createTempDirectory(String prefix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new directory in the default temporary-file directory, using the given
prefix to generate its name, asynchronously.
|
FileSystem |
FileSystem.createTempDirectory(String dir,
String prefix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new directory in the directory provided by the path
path, using the given
prefix to generate its name, asynchronously. |
FileSystem |
FileSystem.createTempFile(String prefix,
String suffix,
Handler<AsyncResult<String>> handler)
Creates a new file in the default temporary-file directory, using the given
prefix and suffix to generate its name, asynchronously.
|
FileSystem |
FileSystem.createTempFile(String prefix,
String suffix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new file in the directory provided by the path
dir, using the given
prefix and suffix to generate its name, asynchronously. |
FileSystem |
FileSystem.createTempFile(String dir,
String prefix,
String suffix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new file in the directory provided by the path
dir, using the given
prefix and suffix to generate its name, asynchronously. |
FileSystem |
FileSystem.delete(String path,
Handler<AsyncResult<Void>> handler)
Deletes the file represented by the specified
path, asynchronously. |
FileSystem |
FileSystem.deleteRecursive(String path,
boolean recursive,
Handler<AsyncResult<Void>> handler)
Deletes the file represented by the specified
path, asynchronously. |
FileSystem |
FileSystem.exists(String path,
Handler<AsyncResult<Boolean>> handler)
Determines whether the file as specified by the path
path exists, asynchronously. |
AsyncFile |
AsyncFile.flush(Handler<AsyncResult<Void>> handler)
Same as
AsyncFile.flush() but the handler will be called when the flush is complete or if an error occurs |
FileSystem |
FileSystem.fsProps(String path,
Handler<AsyncResult<FileSystemProps>> handler)
Returns properties of the file-system being used by the specified
path, asynchronously. |
void |
AsyncFileLock.isValid(Handler<AsyncResult<Boolean>> handler)
Like
AsyncFileLock.isValid() but the handler will be called when the operation completes or if an error occurs. |
FileSystem |
FileSystem.link(String link,
String existing,
Handler<AsyncResult<Void>> handler)
Create a hard link on the file system from
link to existing, asynchronously. |
void |
AsyncFile.lock(Handler<AsyncResult<AsyncFileLock>> handler)
Like
AsyncFile.lock() but the handler will be called when the operation is complete or if an error occurs. |
void |
AsyncFile.lock(long position,
long size,
boolean shared,
Handler<AsyncResult<AsyncFileLock>> handler)
Like
AsyncFile.lock(long, long, boolean) but the handler will be called when the operation is complete or if an error occurs. |
FileSystem |
FileSystem.lprops(String path,
Handler<AsyncResult<FileProps>> handler)
Obtain properties for the link represented by
path, asynchronously. |
FileSystem |
FileSystem.mkdir(String path,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path, asynchronously. |
FileSystem |
FileSystem.mkdir(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path, asynchronously. |
FileSystem |
FileSystem.mkdirs(String path,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path and any non existent parents, asynchronously. |
FileSystem |
FileSystem.mkdirs(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path and any non existent parents, asynchronously. |
FileSystem |
FileSystem.move(String from,
String to,
CopyOptions options,
Handler<AsyncResult<Void>> handler)
Move a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.move(String from,
String to,
Handler<AsyncResult<Void>> handler)
Move a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.open(String path,
OpenOptions options,
Handler<AsyncResult<AsyncFile>> handler)
Open the file represented by
path, asynchronously. |
FileSystem |
FileSystem.props(String path,
Handler<AsyncResult<FileProps>> handler)
Obtain properties for the file represented by
path, asynchronously. |
AsyncFile |
AsyncFile.read(Buffer buffer,
int offset,
long position,
int length,
Handler<AsyncResult<Buffer>> handler)
Reads
length bytes of data from the file at position position in the file, asynchronously. |
FileSystem |
FileSystem.readDir(String path,
Handler<AsyncResult<List<String>>> handler)
Read the contents of the directory specified by
path, asynchronously. |
FileSystem |
FileSystem.readDir(String path,
String filter,
Handler<AsyncResult<List<String>>> handler)
Read the contents of the directory specified by
path, asynchronously. |
FileSystem |
FileSystem.readFile(String path,
Handler<AsyncResult<Buffer>> handler)
Reads the entire file as represented by the path
path as a Buffer, asynchronously. |
FileSystem |
FileSystem.readSymlink(String link,
Handler<AsyncResult<String>> handler)
Returns the path representing the file that the symbolic link specified by
link points to, asynchronously. |
void |
AsyncFileLock.release(Handler<AsyncResult<Void>> handler)
Like
AsyncFileLock.release() but the handler will be called when the operation completes or if an error occurs. |
default void |
AsyncFile.size(Handler<AsyncResult<Long>> handler)
Like
AsyncFile.size() but the handler will be called when the operation is complete or if an error occurs. |
FileSystem |
FileSystem.symlink(String link,
String existing,
Handler<AsyncResult<Void>> handler)
Create a symbolic link on the file system from
link to existing, asynchronously. |
FileSystem |
FileSystem.truncate(String path,
long len,
Handler<AsyncResult<Void>> handler)
Truncate the file represented by
path to length len in bytes, asynchronously. |
FileSystem |
FileSystem.unlink(String link,
Handler<AsyncResult<Void>> handler)
Unlinks the link on the file system represented by the path
link, asynchronously. |
void |
AsyncFile.write(Buffer buffer,
long position,
Handler<AsyncResult<Void>> handler)
Write a
Buffer to the file at position position in the file, asynchronously. |
FileSystem |
FileSystem.writeFile(String path,
Buffer data,
Handler<AsyncResult<Void>> handler)
Creates the file, and writes the specified
Buffer data to the file represented by the path path,
asynchronously. |
| Modifier and Type | Method and Description |
|---|---|
default HttpClientResponse |
HttpClientResponse.body(Handler<AsyncResult<Buffer>> handler)
Same as
HttpClientResponse.body() but with an handler called when the operation completes |
default HttpServerRequest |
HttpServerRequest.body(Handler<AsyncResult<Buffer>> handler)
Same as
HttpServerRequest.body() but with an handler called when the operation completes |
void |
WebSocketClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
void |
HttpServer.close(Handler<AsyncResult<Void>> completionHandler)
Like
HttpServer.close() but supplying a handler that will be called when the server is actually closed (or has failed). |
default void |
HttpConnection.close(Handler<AsyncResult<Void>> handler)
Close the connection and all the currently active streams.
|
void |
HttpClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
void |
WebSocketBase.close(Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close() but with an handler called when the operation completes |
void |
WebSocketBase.close(short statusCode,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(short) but with an handler called when the operation completes |
void |
WebSocketBase.close(short statusCode,
String reason,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(short, String) but with an handler called when the operation completes |
void |
HttpClientRequest.connect(Handler<AsyncResult<HttpClientResponse>> handler)
Create an HTTP tunnel to the server.
|
default void |
WebSocketClient.connect(int port,
String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the specified port, host and relative request URI
|
default void |
ClientWebSocket.connect(int port,
String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the specified port, host and relative request URI
|
default void |
WebSocketClient.connect(String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the default client port, default client host and specified, relative request URI.
|
default void |
ClientWebSocket.connect(String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect this WebSocket at the relative request URI using the default host and port.
|
default void |
WebSocketClient.connect(String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the default client port and specified host and relative request URI.
|
default void |
ClientWebSocket.connect(String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect this WebSocket to the host and relative request URI and default port.
|
void |
WebSocketClient.connect(WebSocketConnectOptions options,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket with the specified options.
|
void |
ClientWebSocket.connect(WebSocketConnectOptions options,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket with the specified options.
|
void |
HttpServerResponse.end(Buffer chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(Buffer) but with an handler called when the operation completes |
void |
HttpClientRequest.end(Buffer chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(String) but with an handler called when the operation completes |
default void |
HttpClientResponse.end(Handler<AsyncResult<Void>> handler)
Same as
HttpClientResponse.end() but with an handler called when the operation completes |
void |
HttpClientRequest.end(Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end() but with an handler called when the operation completes |
default void |
HttpServerRequest.end(Handler<AsyncResult<Void>> handler)
Same as
HttpServerRequest.end() but with an handler called when the operation completes |
void |
WebSocketBase.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end() but with an handler called when the operation completes |
void |
HttpServerResponse.end(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(String) but with an handler called when the operation completes |
void |
HttpClientRequest.end(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(String) but with an handler called when the operation completes |
void |
HttpServerResponse.end(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(String, String) but with an handler called when the operation completes |
void |
HttpClientRequest.end(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(String,String) but with an handler called when the operation completes |
default HttpServer |
HttpServer.listen(Handler<AsyncResult<HttpServer>> listenHandler)
Like
HttpServer.listen() but supplying a handler that will be called when the server is actually listening (or has failed). |
default HttpServer |
HttpServer.listen(int port,
Handler<AsyncResult<HttpServer>> listenHandler)
Like
HttpServer.listen(int) but supplying a handler that will be called when the server is actually listening (or has failed). |
default HttpServer |
HttpServer.listen(int port,
String host,
Handler<AsyncResult<HttpServer>> listenHandler)
Like
HttpServer.listen(int, String) but supplying a handler that will be called when the server is actually
listening (or has failed). |
default HttpServer |
HttpServer.listen(SocketAddress address,
Handler<AsyncResult<HttpServer>> listenHandler)
Tell the server to start listening on the given address supplying
a handler that will be called when the server is actually
listening (or has failed).
|
HttpConnection |
HttpConnection.ping(Buffer data,
Handler<AsyncResult<Buffer>> pongHandler)
Send a PING frame to the remote endpoint.
|
default HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String path,
Handler<AsyncResult<HttpServerResponse>> handler)
Like
HttpServerResponse.push(HttpMethod, String, String, MultiMap, Handler) with the host copied from the current request. |
default HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String path,
MultiMap headers,
Handler<AsyncResult<HttpServerResponse>> handler)
Like
HttpServerResponse.push(HttpMethod, String, String, MultiMap, Handler) with the host copied from the current request. |
default HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String host,
String path,
Handler<AsyncResult<HttpServerResponse>> handler)
Like
HttpServerResponse.push(HttpMethod, String, String, MultiMap, Handler) with no headers. |
default HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String host,
String path,
MultiMap headers,
Handler<AsyncResult<HttpServerResponse>> handler)
Push a response to the client.
The
handler will be notified with a success when the push can be sent and with
a failure when the client has disabled push or reset the push before it has been sent.
The handler may be queued if the client has reduced the maximum number of streams the server can push
concurrently.
Push can be sent only for peer initiated streams and if the response is not ended. |
void |
HttpClient.request(HttpMethod method,
int port,
String host,
String requestURI,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server at the
host and port. |
void |
HttpClient.request(HttpMethod method,
String requestURI,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server at the default host and port.
|
void |
HttpClient.request(HttpMethod method,
String host,
String requestURI,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server at the
host and default port. |
void |
HttpClient.request(RequestOptions options,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server.
|
HttpClientRequest |
HttpClientRequest.response(Handler<AsyncResult<HttpClientResponse>> handler)
Set a callback for the associated
HttpClientResponse. |
default void |
HttpClientRequest.send(Buffer body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a buffer
body. |
default void |
HttpServerResponse.send(Buffer body,
Handler<AsyncResult<Void>> handler)
Send the request with a buffer
body. |
default void |
HttpClientRequest.send(Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with an empty body.
|
default void |
HttpServerResponse.send(Handler<AsyncResult<Void>> handler)
Send the request with an empty body.
|
default void |
HttpClientRequest.send(ReadStream<Buffer> body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a stream
body. |
default void |
HttpServerResponse.send(ReadStream<Buffer> body,
Handler<AsyncResult<Void>> handler)
Send the request with a stream
body. |
default void |
HttpClientRequest.send(String body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a string
body. |
default void |
HttpServerResponse.send(String body,
Handler<AsyncResult<Void>> handler)
Send the request with a string
body. |
default HttpServerResponse |
HttpServerResponse.sendFile(String filename,
Handler<AsyncResult<Void>> resultHandler)
Like
HttpServerResponse.sendFile(String) but providing a handler which will be notified once the file has been completely
written to the wire. |
default HttpServerResponse |
HttpServerResponse.sendFile(String filename,
long offset,
Handler<AsyncResult<Void>> resultHandler)
Like
HttpServerResponse.sendFile(String, long) but providing a handler which will be notified once the file has been completely
written to the wire. |
HttpServerResponse |
HttpServerResponse.sendFile(String filename,
long offset,
long length,
Handler<AsyncResult<Void>> resultHandler)
Like
HttpServerResponse.sendFile(String, long, long) but providing a handler which will be notified once the file has been
completely written to the wire. |
HttpClientRequest |
HttpClientRequest.sendHead(Handler<AsyncResult<Void>> completionHandler)
Like
HttpClientRequest.sendHead() but with an handler after headers have been sent. |
void |
ServerWebSocket.setHandshake(Future<Integer> future,
Handler<AsyncResult<Integer>> handler)
Deprecated.
instead use
ServerWebSocketHandshake |
default void |
HttpConnection.shutdown(Handler<AsyncResult<Void>> handler)
Shutdown a 30 seconds timeout (
shutdown(30, TimeUnit.SECONDS)). |
default void |
HttpConnection.shutdown(long timeout,
Handler<AsyncResult<Void>> handler)
Deprecated.
instead use
HttpConnection.shutdown(long, TimeUnit, Handler) |
default void |
HttpConnection.shutdown(long timeout,
TimeUnit unit,
Handler<AsyncResult<Void>> handler)
Initiate a graceful connection shutdown, the connection is taken out of service and closed when all the inflight requests
are processed, otherwise after a
timeout the connection will be closed. |
void |
HttpServerFileUpload.streamToFileSystem(String filename,
Handler<AsyncResult<Void>> handler)
Stream the content of this upload to the given file on storage.
|
default void |
HttpServerRequest.toNetSocket(Handler<AsyncResult<NetSocket>> handler)
Establish a TCP tunnel with the client.
|
default void |
HttpServerRequest.toWebSocket(Handler<AsyncResult<ServerWebSocket>> handler)
Upgrade the connection of the current request to a WebSocket.
|
HttpConnection |
HttpConnection.updateSettings(Http2Settings settings,
Handler<AsyncResult<Void>> completionHandler)
Send to the remote endpoint an update of this endpoint settings
The
completionHandler will be notified when the remote endpoint has acknowledged the settings. |
default void |
WebSocketClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
WebSocketClient.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
default void |
HttpServer.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
HttpServer.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
default void |
HttpClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
HttpClient.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
default void |
WebSocketClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
WebSocketClient.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
default void |
HttpServer.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
HttpServer.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
default void |
HttpClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
HttpClient.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpClient.webSocket(int port,
String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocket(String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocket(String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocket(WebSocketConnectOptions options,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocketAbs(String url,
MultiMap headers,
WebsocketVersion version,
List<String> subProtocols,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpServerResponse.write(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.write(String) but with an handler called when the operation completes |
void |
HttpClientRequest.write(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.write(String) but with an handler called when the operation completes |
void |
HttpServerResponse.write(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.write(String, String) but with an handler called when the operation completes |
void |
HttpClientRequest.write(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.write(String,String) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeBinaryMessage(Buffer) but with an handler called when the operation completes |
void |
HttpServerResponse.writeEarlyHints(MultiMap headers,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.writeEarlyHints(MultiMap) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeFinalBinaryFrame(Buffer, Handler) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeFinalTextFrame(String, Handler) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeFrame(WebSocketFrame) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writePing(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writePing(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writePing(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writePing(Buffer data,
Handler<AsyncResult<Void>> handler)
Writes a ping frame to the connection.
|
ServerWebSocket |
ServerWebSocket.writePong(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writePong(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writePong(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writePong(Buffer data,
Handler<AsyncResult<Void>> handler)
Writes a pong frame to the connection.
|
ServerWebSocket |
ServerWebSocket.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeTextMessage(String) but with an handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
NetClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
void |
NetSocket.close(Handler<AsyncResult<Void>> handler)
Close the NetSocket and notify the
handler when the operation completes. |
void |
NetServer.close(Handler<AsyncResult<Void>> completionHandler)
Like
NetServer.close() but supplying a handler that will be notified when close is complete. |
NetClient |
NetClient.connect(int port,
String host,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
port and host. |
NetClient |
NetClient.connect(int port,
String host,
String serverName,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
port and host. |
NetClient |
NetClient.connect(SocketAddress remoteAddress,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
remoteAddress. |
NetClient |
NetClient.connect(SocketAddress remoteAddress,
String serverName,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
remoteAddress. |
void |
NetSocket.end(Handler<AsyncResult<Void>> handler)
Calls
NetSocket.end(). |
default NetServer |
NetServer.listen(Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen() but providing a handler that will be notified when the server is listening, or fails. |
default NetServer |
NetServer.listen(int port,
Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(int) but providing a handler that will be notified when the server is listening, or fails. |
default NetServer |
NetServer.listen(int port,
String host,
Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(int, String) but providing a handler that will be notified when the server is listening, or fails. |
default NetServer |
NetServer.listen(SocketAddress localAddress,
Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(SocketAddress) but providing a handler that will be notified when the server is listening, or fails. |
default NetSocket |
NetSocket.sendFile(String filename,
Handler<AsyncResult<Void>> resultHandler)
Same as
NetSocket.sendFile(String) but also takes a handler that will be called when the send has completed or
a failure has occurred |
default NetSocket |
NetSocket.sendFile(String filename,
long offset,
Handler<AsyncResult<Void>> resultHandler)
Same as
NetSocket.sendFile(String, long) but also takes a handler that will be called when the send has completed or
a failure has occurred |
NetSocket |
NetSocket.sendFile(String filename,
long offset,
long length,
Handler<AsyncResult<Void>> resultHandler)
Same as
NetSocket.sendFile(String, long, long) but also takes a handler that will be called when the send has completed or
a failure has occurred |
default void |
NetClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
NetClient.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
default void |
NetServer.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
NetServer.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
default void |
NetClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
NetClient.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
default void |
NetServer.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
NetServer.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
NetSocket |
NetSocket.upgradeToSsl(Handler<AsyncResult<Void>> handler)
Upgrade channel to use SSL/TLS.
|
NetSocket |
NetSocket.upgradeToSsl(String serverName,
Handler<AsyncResult<Void>> handler)
Upgrade channel to use SSL/TLS.
|
void |
NetSocket.write(Buffer message,
Handler<AsyncResult<Void>> handler)
Like
WriteStream.write(Object) but with an handler called when the message has been written
or failed to be written. |
void |
NetSocket.write(String str,
Handler<AsyncResult<Void>> handler)
Same as
NetSocket.write(String) but with an handler called when the operation completes |
void |
NetSocket.write(String str,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
NetSocket.write(String, String) but with an handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
default void |
Counter.addAndGet(long value,
Handler<AsyncResult<Long>> resultHandler)
Add the value to the counter atomically and return the new count
|
default void |
AsyncMap.clear(Handler<AsyncResult<Void>> resultHandler)
Clear all entries in the map
|
default void |
Counter.compareAndSet(long expected,
long value,
Handler<AsyncResult<Boolean>> resultHandler)
Set the counter to the specified value only if the current value is the expectec value.
|
default void |
Counter.decrementAndGet(Handler<AsyncResult<Long>> resultHandler)
Decrement the counter atomically and return the new count
|
default void |
AsyncMap.entries(Handler<AsyncResult<Map<K,V>>> resultHandler)
Get the entries of the map, asynchronously.
|
default void |
Counter.get(Handler<AsyncResult<Long>> resultHandler)
Get the current value of the counter
|
default void |
AsyncMap.get(K k,
Handler<AsyncResult<V>> resultHandler)
Get a value from the map, asynchronously.
|
default void |
Counter.getAndAdd(long value,
Handler<AsyncResult<Long>> resultHandler)
Add the value to the counter atomically and return the value before the add
|
default void |
Counter.getAndIncrement(Handler<AsyncResult<Long>> resultHandler)
Increment the counter atomically and return the value before the increment.
|
<K,V> void |
SharedData.getAsyncMap(String name,
Handler<AsyncResult<AsyncMap<K,V>>> resultHandler)
Get the
AsyncMap with the specified name. |
<K,V> void |
SharedData.getClusterWideMap(String name,
Handler<AsyncResult<AsyncMap<K,V>>> resultHandler)
Get the cluster wide map with the specified name.
|
void |
SharedData.getCounter(String name,
Handler<AsyncResult<Counter>> resultHandler)
Get an asynchronous counter.
|
<K,V> void |
SharedData.getLocalAsyncMap(String name,
Handler<AsyncResult<AsyncMap<K,V>>> resultHandler)
Get the
AsyncMap with the specified name. |
void |
SharedData.getLocalCounter(String name,
Handler<AsyncResult<Counter>> resultHandler)
Get an asynchronous local counter.
|
void |
SharedData.getLocalLock(String name,
Handler<AsyncResult<Lock>> resultHandler)
Get an asynchronous local lock with the specified name.
|
void |
SharedData.getLocalLockWithTimeout(String name,
long timeout,
Handler<AsyncResult<Lock>> resultHandler)
Like
SharedData.getLocalLock(String, Handler) but specifying a timeout. |
void |
SharedData.getLock(String name,
Handler<AsyncResult<Lock>> resultHandler)
Get an asynchronous lock with the specified name.
|
void |
SharedData.getLockWithTimeout(String name,
long timeout,
Handler<AsyncResult<Lock>> resultHandler)
Like
SharedData.getLock(String, Handler) but specifying a timeout. |
default void |
Counter.incrementAndGet(Handler<AsyncResult<Long>> resultHandler)
Increment the counter atomically and return the new count
|
default void |
AsyncMap.keys(Handler<AsyncResult<Set<K>>> resultHandler)
Get the keys of the map, asynchronously.
|
default void |
AsyncMap.put(K k,
V v,
Handler<AsyncResult<Void>> completionHandler)
Put a value in the map, asynchronously.
|
default void |
AsyncMap.put(K k,
V v,
long ttl,
Handler<AsyncResult<Void>> completionHandler)
Like
AsyncMap.put(K, V, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but specifying a time to live for the entry. |
default void |
AsyncMap.putIfAbsent(K k,
V v,
Handler<AsyncResult<V>> completionHandler)
Put the entry only if there is no entry with the key already present.
|
default void |
AsyncMap.putIfAbsent(K k,
V v,
long ttl,
Handler<AsyncResult<V>> completionHandler)
Link
AsyncMap.putIfAbsent(K, V, io.vertx.core.Handler<io.vertx.core.AsyncResult<V>>) but specifying a time to live for the entry. |
default void |
AsyncMap.remove(K k,
Handler<AsyncResult<V>> resultHandler)
Remove a value from the map, asynchronously.
|
default void |
AsyncMap.removeIfPresent(K k,
V v,
Handler<AsyncResult<Boolean>> resultHandler)
Remove a value from the map, only if entry already exists with same value.
|
default void |
AsyncMap.replace(K k,
V v,
Handler<AsyncResult<V>> resultHandler)
Replace the entry only if it is currently mapped to some value
|
default void |
AsyncMap.replace(K k,
V v,
long ttl,
Handler<AsyncResult<V>> resultHandler)
Replace the entry only if it is currently mapped to some value
|
default void |
AsyncMap.replaceIfPresent(K k,
V oldValue,
V newValue,
Handler<AsyncResult<Boolean>> resultHandler)
Replace the entry only if it is currently mapped to a specific value
|
default void |
AsyncMap.replaceIfPresent(K k,
V oldValue,
V newValue,
long ttl,
Handler<AsyncResult<Boolean>> resultHandler)
Replace the entry only if it is currently mapped to a specific value
|
default void |
AsyncMap.size(Handler<AsyncResult<Integer>> resultHandler)
Provide the number of entries in the map
|
default void |
AsyncMap.values(Handler<AsyncResult<List<V>>> resultHandler)
Get the values of the map, asynchronously.
|
| Modifier and Type | Method and Description |
|---|---|
void |
WriteStream.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end() but with an handler called when the operation completes |
default void |
WriteStream.end(T data,
Handler<AsyncResult<Void>> handler)
Same as
#end(T) but with an handler called when the operation completes |
default void |
ReadStream.pipeTo(WriteStream<T> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
Pipe.to(WriteStream<T> dst,
Handler<AsyncResult<Void>> completionHandler)
Start to pipe the elements to the destination
WriteStream. |
void |
WriteStream.write(T data,
Handler<AsyncResult<Void>> handler)
Same as
#write(T) but with an handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
static void |
DB2Connection.connect(Vertx vertx,
DB2ConnectOptions connectOptions,
Handler<AsyncResult<DB2Connection>> handler)
Create a connection to DB2 server with the given
connectOptions. |
static void |
DB2Connection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<DB2Connection>> handler)
Like
DB2Connection.connect(Vertx, DB2ConnectOptions, Handler) with options build
from connectionUri. |
DB2Connection |
DB2Connection.debug(Handler<AsyncResult<Void>> handler)
Send a DEBUG command to dump debug information to the server's stdout.
|
DB2Connection |
DB2Connection.ping(Handler<AsyncResult<Void>> handler)
Send a PING command to check if the server is alive.
|
DB2Connection |
DB2Connection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler) |
| Modifier and Type | Method and Description |
|---|---|
User |
User.isAuthorized(Authorization authority,
Handler<AsyncResult<Boolean>> resultHandler)
Deprecated.
|
default User |
User.isAuthorized(String authority,
Handler<AsyncResult<Boolean>> resultHandler)
Deprecated.
Use typed alternative
User.isAuthorized(Authorization, Handler) |
| Modifier and Type | Method and Description |
|---|---|
default void |
AuthenticationProvider.authenticate(Credentials credentials,
Handler<AsyncResult<User>> resultHandler)
Authenticate a user.
|
void |
AuthenticationProvider.authenticate(JsonObject credentials,
Handler<AsyncResult<User>> resultHandler)
Deprecated.
For type safety this method should be avoided and
AuthenticationProvider.authenticate(Credentials, Handler) should be
used instead. |
| Modifier and Type | Method and Description |
|---|---|
void |
AuthorizationProvider.getAuthorizations(User user,
Handler<AsyncResult<Void>> handler)
Updates the user with the set of authorizations.
|
| Modifier and Type | Method and Description |
|---|---|
JDBCUserUtil |
JDBCUserUtil.createHashedUser(String username,
String hash,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
Insert a user into a database.
|
JDBCUserUtil |
JDBCUserUtil.createRolePermission(String role,
String permission,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
Insert a role permission into a database.
|
JDBCUserUtil |
JDBCUserUtil.createUser(String username,
String password,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
Insert a user into a database.
|
JDBCUserUtil |
JDBCUserUtil.createUserRole(String username,
String role,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
Insert a user role into a database.
|
| Modifier and Type | Method and Description |
|---|---|
default MongoUserUtil |
MongoUserUtil.createHashedUser(String username,
String hash,
Handler<AsyncResult<String>> resultHandler)
Insert a user into a database.
|
default MongoUserUtil |
MongoUserUtil.createUser(String username,
String password,
Handler<AsyncResult<String>> resultHandler)
Insert a user into a database.
|
default MongoUserUtil |
MongoUserUtil.createUserRolesAndPermissions(String username,
List<String> roles,
List<String> permissions,
Handler<AsyncResult<String>> resultHandler)
Insert a user role into a database.
|
default void |
MongoAuth.insertUser(String username,
String password,
List<String> roles,
List<String> permissions,
Handler<AsyncResult<String>> resultHandler)
Deprecated.
Please use
MongoUserUtil instead.
Insert a new user into mongo in the convenient way |
| Modifier and Type | Method and Description |
|---|---|
default OAuth2Auth |
OAuth2Auth.jWKSet(Handler<AsyncResult<Void>> handler)
Retrieve the public server JSON Web Key (JWK) required to verify the authenticity
of issued ID and access tokens.
|
default OAuth2Auth |
OAuth2Auth.refresh(User user,
Handler<AsyncResult<User>> handler)
Refresh the current User (access token).
|
default OAuth2Auth |
OAuth2Auth.revoke(User user,
Handler<AsyncResult<Void>> handler)
Revoke an obtained access token.
|
default OAuth2Auth |
OAuth2Auth.revoke(User user,
String tokenType,
Handler<AsyncResult<Void>> handler)
Revoke an obtained access or refresh token.
|
default OAuth2Auth |
OAuth2Auth.userInfo(User user,
Handler<AsyncResult<JsonObject>> handler)
Retrieve profile information and other attributes for a logged-in end-user.
|
| Modifier and Type | Method and Description |
|---|---|
static void |
SalesforceAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
IBMCloudAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
GoogleAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
AzureADAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
OpenIDConnectAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
KeycloakAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
AmazonCognitoAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
| Modifier and Type | Method and Description |
|---|---|
default SqlUserUtil |
SqlUserUtil.createHashedUser(String username,
String hash,
Handler<AsyncResult<Void>> resultHandler)
Insert a user into a database.
|
default SqlUserUtil |
SqlUserUtil.createRolePermission(String role,
String permission,
Handler<AsyncResult<Void>> resultHandler)
Insert a role permission into a database.
|
default SqlUserUtil |
SqlUserUtil.createUser(String username,
String password,
Handler<AsyncResult<Void>> resultHandler)
Insert a user into a database.
|
default SqlUserUtil |
SqlUserUtil.createUserRole(String username,
String role,
Handler<AsyncResult<Void>> resultHandler)
Insert a user role into a database.
|
| Modifier and Type | Method and Description |
|---|---|
default WebAuthn |
WebAuthn.createCredentialsOptions(JsonObject user,
Handler<AsyncResult<JsonObject>> handler)
Gets a challenge and any other parameters for the
navigator.credentials.create() call. |
default MetaDataService |
MetaDataService.fetchTOC(Handler<AsyncResult<Boolean>> handler)
Fetches the FIDO2 MDS3 TOC and process the entries to the metadata store.
|
default MetaDataService |
MetaDataService.fetchTOC(String url,
Handler<AsyncResult<Boolean>> handler)
Fetches the FIDO2 TOC for the given URL and process the entries to the metadata store.
|
default WebAuthn |
WebAuthn.getCredentialsOptions(String name,
Handler<AsyncResult<JsonObject>> handler)
Creates an assertion challenge and any other parameters for the
navigator.credentials.get() call. |
| Modifier and Type | Method and Description |
|---|---|
ConsulClient |
ConsulClient.agentInfo(Handler<AsyncResult<JsonObject>> resultHandler)
Returns the configuration and member information of the local agent
|
ConsulClient |
ConsulClient.catalogDatacenters(Handler<AsyncResult<List<String>>> resultHandler)
Return all the datacenters that are known by the Consul server
|
ConsulClient |
ConsulClient.catalogNodes(Handler<AsyncResult<NodeList>> resultHandler)
Returns the nodes registered in a datacenter
|
ConsulClient |
ConsulClient.catalogNodeServices(String node,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the node's registered services
|
ConsulClient |
ConsulClient.catalogNodeServicesWithOptions(String node,
BlockingQueryOptions options,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the node's registered services
This is blocking query unlike
ConsulClient.catalogNodeServices(String, Handler) |
ConsulClient |
ConsulClient.catalogNodesWithOptions(NodeQueryOptions options,
Handler<AsyncResult<NodeList>> resultHandler)
Returns the nodes registered in a datacenter
|
ConsulClient |
ConsulClient.catalogServiceNodes(String service,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the nodes providing a service
|
ConsulClient |
ConsulClient.catalogServiceNodesWithOptions(String service,
ServiceQueryOptions options,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the nodes providing a service
|
ConsulClient |
ConsulClient.catalogServices(Handler<AsyncResult<ServiceList>> resultHandler)
Returns the services registered in a datacenter
|
ConsulClient |
ConsulClient.catalogServicesWithOptions(BlockingQueryOptions options,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the services registered in a datacenter
This is blocking query unlike
ConsulClient.catalogServices(Handler) |
ConsulClient |
ConsulClient.cloneAclToken(String accessorId,
CloneAclTokenOptions cloneAclToken,
Handler<AsyncResult<AclToken>> resultHandler)
Clones an existing ACL token
|
ConsulClient |
ConsulClient.cloneAclToken(String id,
Handler<AsyncResult<String>> idHandler)
Deprecated.
|
ConsulClient |
ConsulClient.coordinateDatacenters(Handler<AsyncResult<List<DcCoordinates>>> resultHandler)
Returns the WAN network coordinates for all Consul servers, organized by DCs
|
ConsulClient |
ConsulClient.coordinateNodes(Handler<AsyncResult<CoordinateList>> resultHandler)
Returns the LAN network coordinates for all nodes in a given DC
|
ConsulClient |
ConsulClient.coordinateNodesWithOptions(BlockingQueryOptions options,
Handler<AsyncResult<CoordinateList>> resultHandler)
Returns the LAN network coordinates for all nodes in a given DC
This is blocking query unlike
ConsulClient.coordinateNodes(Handler) |
ConsulClient |
ConsulClient.createAclPolicy(AclPolicy policy,
Handler<AsyncResult<String>> resultHandler)
Creates a new ACL policy
|
ConsulClient |
ConsulClient.createAclToken(AclToken token,
Handler<AsyncResult<AclToken>> resultHandler)
Create an Acl token
|
ConsulClient |
ConsulClient.createAclToken(AclToken token,
Handler<AsyncResult<String>> idHandler)
Deprecated.
|
ConsulClient |
ConsulClient.createPreparedQuery(PreparedQueryDefinition definition,
Handler<AsyncResult<String>> resultHandler) |
ConsulClient |
ConsulClient.createSession(Handler<AsyncResult<String>> idHandler)
Initialize a new session
|
ConsulClient |
ConsulClient.createSessionWithOptions(SessionOptions options,
Handler<AsyncResult<String>> idHandler)
Initialize a new session
|
ConsulClient |
ConsulClient.deleteAclToken(String accessorId,
Handler<AsyncResult<Boolean>> resultHandler)
Deletes an ACL token
|
ConsulClient |
ConsulClient.deletePolicy(String id,
Handler<AsyncResult<Boolean>> resultHandler)
This endpoint deletes an ACL policy
|
ConsulClient |
ConsulClient.deletePreparedQuery(String id,
Handler<AsyncResult<Void>> resultHandler)
Deletes an existing prepared query
|
ConsulClient |
ConsulClient.deleteValue(String key,
Handler<AsyncResult<Void>> resultHandler)
Remove the key/value pair that corresponding to the specified key
|
ConsulClient |
ConsulClient.deleteValues(String keyPrefix,
Handler<AsyncResult<Void>> resultHandler)
Removes all the key/value pair that corresponding to the specified key prefix
|
ConsulClient |
ConsulClient.deregisterCatalogService(String nodeId,
String serviceId,
Handler<AsyncResult<Void>> resultHandler)
Deregister entities from the node or deregister the node itself.
|
ConsulClient |
ConsulClient.deregisterCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Remove a check from the local agent.
|
ConsulClient |
ConsulClient.deregisterService(String id,
Handler<AsyncResult<Void>> resultHandler)
Remove a service from the local agent.
|
ConsulClient |
ConsulClient.destroyAclToken(String id,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
Use
ConsulClient.deleteAclToken(String) instead |
ConsulClient |
ConsulClient.destroySession(String id,
Handler<AsyncResult<Void>> resultHandler)
Destroys the given session
|
ConsulClient |
ConsulClient.executePreparedQuery(String query,
Handler<AsyncResult<PreparedQueryExecuteResponse>> resultHandler)
Executes an existing prepared query.
|
ConsulClient |
ConsulClient.executePreparedQueryWithOptions(String query,
PreparedQueryExecuteOptions options,
Handler<AsyncResult<PreparedQueryExecuteResponse>> resultHandler)
Executes an existing prepared query.
|
ConsulClient |
ConsulClient.failCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "critical".
|
ConsulClient |
ConsulClient.failCheckWithNote(String checkId,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "critical".
|
ConsulClient |
ConsulClient.fireEvent(String name,
Handler<AsyncResult<Event>> resultHandler)
Fires a new user event
|
ConsulClient |
ConsulClient.fireEventWithOptions(String name,
EventOptions options,
Handler<AsyncResult<Event>> resultHandler)
Fires a new user event
|
ConsulClient |
ConsulClient.getAclPolicies(Handler<AsyncResult<List<AclPolicy>>> resultHandler)
This endpoint lists all the ACL policies.
|
ConsulClient |
ConsulClient.getAclTokens(Handler<AsyncResult<List<AclToken>>> resultHandler)
Get list of Acl token
|
ConsulClient |
ConsulClient.getAllPreparedQueries(Handler<AsyncResult<List<PreparedQueryDefinition>>> resultHandler)
Returns a list of all prepared queries.
|
ConsulClient |
ConsulClient.getKeys(String keyPrefix,
Handler<AsyncResult<List<String>>> resultHandler)
Returns the list of keys that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getKeysWithOptions(String keyPrefix,
BlockingQueryOptions options,
Handler<AsyncResult<List<String>>> resultHandler)
Returns the list of keys that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getPreparedQuery(String id,
Handler<AsyncResult<PreparedQueryDefinition>> resultHandler)
Returns an existing prepared query
|
ConsulClient |
ConsulClient.getValue(String key,
Handler<AsyncResult<KeyValue>> resultHandler)
Returns key/value pair that corresponding to the specified key.
|
ConsulClient |
ConsulClient.getValues(String keyPrefix,
Handler<AsyncResult<KeyValueList>> resultHandler)
Returns the list of key/value pairs that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getValuesWithOptions(String keyPrefix,
BlockingQueryOptions options,
Handler<AsyncResult<KeyValueList>> resultHandler)
Returns the list of key/value pairs that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getValueWithOptions(String key,
BlockingQueryOptions options,
Handler<AsyncResult<KeyValue>> resultHandler)
Returns key/value pair that corresponding to the specified key.
|
ConsulClient |
ConsulClient.healthChecks(String service,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks associated with the service
|
ConsulClient |
ConsulClient.healthChecksWithOptions(String service,
CheckQueryOptions options,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks associated with the service
|
ConsulClient |
ConsulClient.healthNodesWithOptions(String node,
CheckQueryOptions options,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks specific to the node provided on the path.
|
ConsulClient |
ConsulClient.healthServiceNodes(String service,
boolean passing,
Handler<AsyncResult<ServiceEntryList>> resultHandler)
Returns the nodes providing the service.
|
ConsulClient |
ConsulClient.healthServiceNodesWithOptions(String service,
boolean passing,
ServiceQueryOptions options,
Handler<AsyncResult<ServiceEntryList>> resultHandler)
Returns the nodes providing the service.
|
ConsulClient |
ConsulClient.healthState(HealthState healthState,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks in the specified status
|
ConsulClient |
ConsulClient.healthStateWithOptions(HealthState healthState,
CheckQueryOptions options,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks in the specified status
|
ConsulClient |
ConsulClient.infoAclToken(String id,
Handler<AsyncResult<AclToken>> tokenHandler)
Deprecated.
Use
ConsulClient.readAclToken(String) instead |
ConsulClient |
ConsulClient.infoSession(String id,
Handler<AsyncResult<Session>> resultHandler)
Returns the requested session information
|
ConsulClient |
ConsulClient.infoSessionWithOptions(String id,
BlockingQueryOptions options,
Handler<AsyncResult<Session>> resultHandler)
Returns the requested session information
This is blocking query unlike
ConsulClient.infoSession(String, Handler) |
ConsulClient |
ConsulClient.leaderStatus(Handler<AsyncResult<String>> resultHandler)
Get the Raft leader for the datacenter in which the agent is running.
|
ConsulClient |
ConsulClient.listAclTokens(Handler<AsyncResult<List<AclToken>>> resultHandler)
Deprecated.
Use
ConsulClient.getAclTokens() instead |
ConsulClient |
ConsulClient.listEvents(Handler<AsyncResult<EventList>> resultHandler)
Returns the most recent events known by the agent
|
ConsulClient |
ConsulClient.listEventsWithOptions(EventListOptions options,
Handler<AsyncResult<EventList>> resultHandler)
Returns the most recent events known by the agent.
|
ConsulClient |
ConsulClient.listNodeSessions(String nodeId,
Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions for a given node
|
ConsulClient |
ConsulClient.listNodeSessionsWithOptions(String nodeId,
BlockingQueryOptions options,
Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions for a given node
This is blocking query unlike
ConsulClient.listNodeSessions(String, Handler) |
ConsulClient |
ConsulClient.listSessions(Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions
|
ConsulClient |
ConsulClient.listSessionsWithOptions(BlockingQueryOptions options,
Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions
This is blocking query unlike
ConsulClient.listSessions(Handler) |
ConsulClient |
ConsulClient.localChecks(Handler<AsyncResult<List<Check>>> resultHandler)
Return all the checks that are registered with the local agent.
|
ConsulClient |
ConsulClient.localServices(Handler<AsyncResult<List<Service>>> resultHandler)
Returns list of services registered with the local agent.
|
ConsulClient |
ConsulClient.maintenanceService(MaintenanceOptions maintenanceOptions,
Handler<AsyncResult<Void>> resultHandler)
Places a given service into "maintenance mode"
|
ConsulClient |
ConsulClient.passCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "passing".
|
ConsulClient |
ConsulClient.passCheckWithNote(String checkId,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "passing".
|
ConsulClient |
ConsulClient.peersStatus(Handler<AsyncResult<List<String>>> resultHandler)
Retrieves the Raft peers for the datacenter in which the the agent is running.
|
ConsulClient |
ConsulClient.putValue(String key,
String value,
Handler<AsyncResult<Boolean>> resultHandler)
Adds specified key/value pair
|
ConsulClient |
ConsulClient.putValueWithOptions(String key,
String value,
KeyValueOptions options,
Handler<AsyncResult<Boolean>> resultHandler) |
ConsulClient |
ConsulClient.readAclToken(String accessorId,
Handler<AsyncResult<AclToken>> resultHandler)
Reads an ACL token with the given Accessor ID
|
ConsulClient |
ConsulClient.readPolicy(String id,
Handler<AsyncResult<AclPolicy>> resultHandler)
This endpoint reads an ACL policy with the given ID
|
ConsulClient |
ConsulClient.readPolicyByName(String name,
Handler<AsyncResult<AclPolicy>> resultHandler)
This endpoint reads an ACL policy with the given name
|
ConsulClient |
ConsulClient.registerCatalogService(Node nodeOptions,
ServiceOptions serviceOptions,
Handler<AsyncResult<Void>> resultHandler)
Register node with external service
|
ConsulClient |
ConsulClient.registerCheck(CheckOptions checkOptions,
Handler<AsyncResult<Void>> resultHandler)
Add a new check to the local agent.
|
ConsulClient |
ConsulClient.registerService(ServiceOptions serviceOptions,
Handler<AsyncResult<Void>> resultHandler)
Adds a new service, with an optional health check, to the local agent.
|
ConsulClient |
ConsulClient.renewSession(String id,
Handler<AsyncResult<Session>> resultHandler)
Renews the given session.
|
ConsulClient |
ConsulClient.transaction(TxnRequest request,
Handler<AsyncResult<TxnResponse>> resultHandler)
Manages multiple operations inside a single, atomic transaction.
|
ConsulClient |
ConsulClient.updateAclToken(AclToken token,
Handler<AsyncResult<String>> idHandler)
Deprecated.
|
ConsulClient |
ConsulClient.updateAclToken(String accessorId,
AclToken token,
Handler<AsyncResult<AclToken>> resultHandler)
Update an existing Acl token
|
ConsulClient |
ConsulClient.updateCheck(String checkId,
CheckStatus status,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to given status.
|
ConsulClient |
ConsulClient.updateCheckWithNote(String checkId,
CheckStatus status,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to given status.
|
ConsulClient |
ConsulClient.updatePolicy(String id,
AclPolicy policy,
Handler<AsyncResult<AclPolicy>> resultHandler)
This endpoint updates an existing ACL policy
|
ConsulClient |
ConsulClient.updatePreparedQuery(PreparedQueryDefinition definition,
Handler<AsyncResult<Void>> resultHandler) |
ConsulClient |
ConsulClient.warnCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "warning".
|
ConsulClient |
ConsulClient.warnCheckWithNote(String checkId,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "warning".
|
| Modifier and Type | Method and Description |
|---|---|
void |
TcpEventBusBridge.close(Handler<AsyncResult<Void>> handler)
Close the current socket.
|
TcpEventBusBridge |
TcpEventBusBridge.listen(Handler<AsyncResult<TcpEventBusBridge>> handler)
Listen on default port 7000 with a handler to report the state of the socket listen operation.
|
TcpEventBusBridge |
TcpEventBusBridge.listen(int port,
Handler<AsyncResult<TcpEventBusBridge>> handler)
Listen on specific port
|
TcpEventBusBridge |
TcpEventBusBridge.listen(int port,
String address,
Handler<AsyncResult<TcpEventBusBridge>> handler)
Listen on specific port and bind to specific address
|
| Modifier and Type | Method and Description |
|---|---|
void |
HealthChecks.checkStatus(Handler<AsyncResult<CheckResult>> resultHandler)
Invokes the registered procedures.
|
void |
HealthChecks.checkStatus(String name,
Handler<AsyncResult<CheckResult>> resultHandler)
Invokes the registered procedure with the given name and sub-procedures.
|
HealthChecks |
HealthChecks.invoke(String name,
Handler<AsyncResult<JsonObject>> resultHandler)
Invokes the registered procedure with the given name and sub-procedures.
|
| Modifier and Type | Method and Description |
|---|---|
protected void |
HttpServiceFactory.doRequest(HttpClient client,
File file,
URI url,
File signatureFile,
URI signatureURL,
Handler<AsyncResult<io.vertx.ext.httpservicefactory.HttpServiceFactory.Result>> handler) |
| Modifier and Type | Method and Description |
|---|---|
void |
MailClient.close(Handler<AsyncResult<Void>> closedHandler)
Close the MailClient
|
MailClient |
MailClient.sendMail(MailMessage email,
Handler<AsyncResult<MailResult>> resultHandler)
send a single mail via MailClient
|
| Modifier and Type | Method and Description |
|---|---|
MongoClient |
MongoClient.bulkWrite(String collection,
List<BulkOperation> operations,
Handler<AsyncResult<MongoClientBulkWriteResult>> resultHandler)
Execute a bulk operation.
|
MongoClient |
MongoClient.bulkWriteWithOptions(String collection,
List<BulkOperation> operations,
BulkWriteOptions bulkWriteOptions,
Handler<AsyncResult<MongoClientBulkWriteResult>> resultHandler)
Execute a bulk operation with the specified write options.
|
void |
MongoClient.close(Handler<AsyncResult<Void>> handler)
Close the client and release its resources
|
MongoClient |
MongoClient.count(String collection,
JsonObject query,
Handler<AsyncResult<Long>> resultHandler)
Count matching documents in a collection.
|
MongoClient |
MongoClient.countWithOptions(String collection,
JsonObject query,
CountOptions countOptions,
Handler<AsyncResult<Long>> resultHandler)
Count matching documents in a collection.
|
MongoClient |
MongoClient.createCollection(String collectionName,
Handler<AsyncResult<Void>> resultHandler)
Create a new collection
|
MongoClient |
MongoClient.createCollectionWithOptions(String collectionName,
CreateCollectionOptions collectionOptions,
Handler<AsyncResult<Void>> resultHandler)
Create a new collection with options
|
MongoClient |
MongoClient.createDefaultGridFsBucketService(Handler<AsyncResult<MongoGridFsClient>> resultHandler)
Creates a
MongoGridFsClient used to interact with Mongo GridFS. |
MongoClient |
MongoClient.createGridFsBucketService(String bucketName,
Handler<AsyncResult<MongoGridFsClient>> resultHandler)
Creates a
MongoGridFsClient used to interact with Mongo GridFS. |
MongoClient |
MongoClient.createIndex(String collection,
JsonObject key,
Handler<AsyncResult<Void>> resultHandler)
Creates an index.
|
MongoClient |
MongoClient.createIndexes(String collection,
List<IndexModel> indexes,
Handler<AsyncResult<Void>> resultHandler)
creates an indexes
|
MongoClient |
MongoClient.createIndexWithOptions(String collection,
JsonObject key,
IndexOptions options,
Handler<AsyncResult<Void>> resultHandler)
Creates an index.
|
MongoGridFsClient |
MongoGridFsClient.delete(String id,
Handler<AsyncResult<Void>> resultHandler)
Deletes a file by it's ID
|
MongoClient |
MongoClient.distinct(String collection,
String fieldName,
String resultClassname,
DistinctOptions distinctOptions,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name.
|
MongoClient |
MongoClient.distinct(String collection,
String fieldName,
String resultClassname,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name.
|
MongoClient |
MongoClient.distinctWithQuery(String collection,
String fieldName,
String resultClassname,
JsonObject query,
DistinctOptions distinctOptions,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name filtered by specified query.
|
MongoClient |
MongoClient.distinctWithQuery(String collection,
String fieldName,
String resultClassname,
JsonObject query,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name filtered by specified query.
|
MongoGridFsClient |
MongoGridFsClient.downloadByFileName(WriteStream<Buffer> stream,
String fileName,
Handler<AsyncResult<Long>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.downloadByFileNameWithOptions(WriteStream<Buffer> stream,
String fileName,
GridFsDownloadOptions options,
Handler<AsyncResult<Long>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.downloadById(WriteStream<Buffer> stream,
String id,
Handler<AsyncResult<Long>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.downloadFile(String fileName,
Handler<AsyncResult<Long>> resultHandler)
Downloads a file.
|
MongoGridFsClient |
MongoGridFsClient.downloadFileAs(String fileName,
String newFileName,
Handler<AsyncResult<Long>> resultHandler)
Downloads a file and gives it a new name.
|
MongoGridFsClient |
MongoGridFsClient.downloadFileByID(String id,
String fileName,
Handler<AsyncResult<Long>> resultHandler)
Downloads a file using the ID generated by GridFs.
|
MongoGridFsClient |
MongoGridFsClient.drop(Handler<AsyncResult<Void>> resultHandler)
Drops the entire file bucket with all of its contents
|
MongoClient |
MongoClient.dropCollection(String collection,
Handler<AsyncResult<Void>> resultHandler)
Drop a collection
|
MongoClient |
MongoClient.dropIndex(String collection,
String indexName,
Handler<AsyncResult<Void>> resultHandler)
Drops the index given its name.
|
MongoClient |
MongoClient.find(String collection,
JsonObject query,
Handler<AsyncResult<List<JsonObject>>> resultHandler)
Find matching documents in the specified collection
|
MongoGridFsClient |
MongoGridFsClient.findAllIds(Handler<AsyncResult<List<String>>> resultHandler)
Finds all file ids in the bucket
|
MongoGridFsClient |
MongoGridFsClient.findIds(JsonObject query,
Handler<AsyncResult<List<String>>> resultHandler)
Finds all file ids that match a query.
|
MongoClient |
MongoClient.findOne(String collection,
JsonObject query,
JsonObject fields,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection
|
MongoClient |
MongoClient.findOneAndDelete(String collection,
JsonObject query,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and delete it.
|
MongoClient |
MongoClient.findOneAndDeleteWithOptions(String collection,
JsonObject query,
FindOptions findOptions,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and delete it.
|
MongoClient |
MongoClient.findOneAndReplace(String collection,
JsonObject query,
JsonObject replace,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and replace it.
|
MongoClient |
MongoClient.findOneAndReplaceWithOptions(String collection,
JsonObject query,
JsonObject replace,
FindOptions findOptions,
UpdateOptions updateOptions,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and replace it.
|
MongoClient |
MongoClient.findOneAndUpdate(String collection,
JsonObject query,
JsonObject update,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and update it.
|
MongoClient |
MongoClient.findOneAndUpdateWithOptions(String collection,
JsonObject query,
JsonObject update,
FindOptions findOptions,
UpdateOptions updateOptions,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and update it.
|
MongoClient |
MongoClient.findWithOptions(String collection,
JsonObject query,
FindOptions options,
Handler<AsyncResult<List<JsonObject>>> resultHandler)
Find matching documents in the specified collection, specifying options
|
MongoClient |
MongoClient.getCollections(Handler<AsyncResult<List<String>>> resultHandler)
Get a list of all collections in the database.
|
MongoClient |
MongoClient.insert(String collection,
JsonObject document,
Handler<AsyncResult<String>> resultHandler)
Insert a document in the specified collection
|
MongoClient |
MongoClient.insertWithOptions(String collection,
JsonObject document,
WriteOption writeOption,
Handler<AsyncResult<String>> resultHandler)
Insert a document in the specified collection with the specified write option
|
MongoClient |
MongoClient.listIndexes(String collection,
Handler<AsyncResult<JsonArray>> resultHandler)
Get all the indexes in this collection.
|
MongoClient |
MongoClient.removeDocument(String collection,
JsonObject query,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove a single matching document from a collection and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.removeDocuments(String collection,
JsonObject query,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove matching documents from a collection and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.removeDocumentsWithOptions(String collection,
JsonObject query,
WriteOption writeOption,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove matching documents from a collection with the specified write option and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.removeDocumentWithOptions(String collection,
JsonObject query,
WriteOption writeOption,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove a single matching document from a collection with the specified write option and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.replaceDocuments(String collection,
JsonObject query,
JsonObject replace,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Replace matching documents in the specified collection and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.replaceDocumentsWithOptions(String collection,
JsonObject query,
JsonObject replace,
UpdateOptions options,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Replace matching documents in the specified collection, specifying options and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.runCommand(String commandName,
JsonObject command,
Handler<AsyncResult<JsonObject>> resultHandler)
Run an arbitrary MongoDB command.
|
MongoClient |
MongoClient.save(String collection,
JsonObject document,
Handler<AsyncResult<String>> resultHandler)
Save a document in the specified collection
|
MongoClient |
MongoClient.saveWithOptions(String collection,
JsonObject document,
WriteOption writeOption,
Handler<AsyncResult<String>> resultHandler)
Save a document in the specified collection with the specified write option
|
MongoClient |
MongoClient.updateCollection(String collection,
JsonObject query,
JsonArray update,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Use an aggregation pipeline to update documents in the specified collection and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.updateCollection(String collection,
JsonObject query,
JsonObject update,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Update matching documents in the specified collection and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.updateCollectionWithOptions(String collection,
JsonObject query,
JsonArray update,
UpdateOptions options,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Use an aggregation pipeline to update documents in the specified collection, specifying options and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.updateCollectionWithOptions(String collection,
JsonObject query,
JsonObject update,
UpdateOptions options,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Update matching documents in the specified collection, specifying options and return the handler with
MongoClientUpdateResult result |
MongoGridFsClient |
MongoGridFsClient.uploadByFileName(ReadStream<Buffer> stream,
String fileName,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadByFileNameWithOptions(ReadStream<Buffer> stream,
String fileName,
GridFsUploadOptions options,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadFile(String fileName,
Handler<AsyncResult<String>> resultHandler)
Upload a file to gridfs
|
MongoGridFsClient |
MongoGridFsClient.uploadFileWithOptions(String fileName,
GridFsUploadOptions options,
Handler<AsyncResult<String>> resultHandler)
Upload a file to gridfs with options
|
| Modifier and Type | Method and Description |
|---|---|
void |
ReactiveWriteStream.end(Handler<AsyncResult<Void>> handler)
Calls
ReactiveWriteStream.close(). |
void |
ReactiveWriteStream.write(T data,
Handler<AsyncResult<Void>> handler) |
| Modifier and Type | Method and Description |
|---|---|
void |
ShellServer.close(Handler<AsyncResult<Void>> completionHandler)
Close the shell server, this is an asynchronous close.
|
ShellServer |
ShellServer.listen(Handler<AsyncResult<Void>> listenHandler)
Start the shell service, this is an asynchronous start.
|
void |
ShellService.start(Handler<AsyncResult<Void>> startHandler)
Start the shell service, this is an asynchronous start.
|
void |
ShellService.stop(Handler<AsyncResult<Void>> stopHandler)
Stop the shell service, this is an asynchronous start.
|
| Modifier and Type | Method and Description |
|---|---|
CommandRegistry |
CommandRegistry.registerCommand(Class<? extends AnnotatedCommand> command,
Handler<AsyncResult<Command>> completionHandler)
Register a single command.
|
CommandRegistry |
CommandRegistry.registerCommand(Command command,
Handler<AsyncResult<Command>> completionHandler)
Register a command
|
CommandRegistry |
CommandRegistry.registerCommands(List<Command> commands,
Handler<AsyncResult<List<Command>>> completionHandler)
Register a list of commands.
|
CommandRegistry |
CommandRegistry.unregisterCommand(String commandName,
Handler<AsyncResult<Void>> completionHandler)
Unregister a command.
|
| Modifier and Type | Method and Description |
|---|---|
void |
CommandResolverFactory.resolver(Vertx vertx,
Handler<AsyncResult<CommandResolver>> resolveHandler)
Obtain a command resolver for a Vert.x instance.
|
| Modifier and Type | Method and Description |
|---|---|
void |
TermServer.close(Handler<AsyncResult<Void>> completionHandler)
Like
TermServer.close() but supplying a handler that will be notified when close is complete. |
TermServer |
TermServer.listen(Handler<AsyncResult<Void>> listenHandler)
Bind the term server, the
TermServer.termHandler(Handler) must be set before. |
| Modifier and Type | Method and Description |
|---|---|
SQLConnection |
SQLConnection.batch(List<String> sqlStatements,
Handler<AsyncResult<List<Integer>>> handler)
Batch simple SQL strings and execute the batch where the async result contains a array of Integers.
|
SQLConnection |
SQLConnection.batchCallableWithParams(String sqlStatement,
List<JsonArray> inArgs,
List<JsonArray> outArgs,
Handler<AsyncResult<List<Integer>>> handler)
Batch a callable statement with all entries from the args list.
|
SQLConnection |
SQLConnection.batchWithParams(String sqlStatement,
List<JsonArray> args,
Handler<AsyncResult<List<Integer>>> handler)
Batch a prepared statement with all entries from the args list.
|
SQLConnection |
SQLConnection.call(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
default SQLClient |
SQLClient.call(String sql,
Handler<AsyncResult<ResultSet>> handler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLOperations |
SQLOperations.call(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLConnection |
SQLConnection.callWithParams(String sql,
JsonArray params,
JsonArray outputs,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
default SQLClient |
SQLClient.callWithParams(String sql,
JsonArray params,
JsonArray outputs,
Handler<AsyncResult<ResultSet>> handler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLOperations |
SQLOperations.callWithParams(String sql,
JsonArray params,
JsonArray outputs,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
void |
SQLRowStream.close(Handler<AsyncResult<Void>> handler)
Closes the stream/underlying cursor(s).
|
void |
SQLConnection.close(Handler<AsyncResult<Void>> handler)
Closes the connection.
|
void |
SQLClient.close(Handler<AsyncResult<Void>> handler)
Close the client and release all resources.
|
SQLConnection |
SQLConnection.commit(Handler<AsyncResult<Void>> handler)
Commits all changes made since the previous commit/rollback.
|
SQLConnection |
SQLConnection.execute(String sql,
Handler<AsyncResult<Void>> resultHandler)
Executes the given SQL statement
|
SQLClient |
SQLClient.getConnection(Handler<AsyncResult<SQLConnection>> handler)
Returns a connection that can be used to perform SQL operations on.
|
SQLConnection |
SQLConnection.getTransactionIsolation(Handler<AsyncResult<TransactionIsolation>> handler)
Attempts to return the transaction isolation level for this Connection object to the one given.
|
SQLConnection |
SQLConnection.query(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT statement which returns the results of the query. |
default SQLClient |
SQLClient.query(String sql,
Handler<AsyncResult<ResultSet>> handler)
Execute a single SQL statement, this method acquires a connection from the the pool and executes the SQL
statement and returns it back after the execution.
|
SQLOperations |
SQLOperations.query(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT statement which returns the results of the query. |
default SQLOperations |
SQLOperations.querySingle(String sql,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement that returns a single SQL row.
|
default SQLOperations |
SQLOperations.querySingleWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement with arguments that returns a single SQL row.
|
SQLConnection |
SQLConnection.queryStream(String sql,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
default SQLClient |
SQLClient.queryStream(String sql,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLOperations |
SQLOperations.queryStream(String sql,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLConnection |
SQLConnection.queryStreamWithParams(String sql,
JsonArray params,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
default SQLClient |
SQLClient.queryStreamWithParams(String sql,
JsonArray params,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLOperations |
SQLOperations.queryStreamWithParams(String sql,
JsonArray params,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLConnection |
SQLConnection.queryWithParams(String sql,
JsonArray params,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT prepared statement which returns the results of the query. |
default SQLClient |
SQLClient.queryWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<ResultSet>> handler)
Execute a single SQL prepared statement, this method acquires a connection from the the pool and executes the SQL
prepared statement and returns it back after the execution.
|
SQLOperations |
SQLOperations.queryWithParams(String sql,
JsonArray params,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT prepared statement which returns the results of the query. |
SQLConnection |
SQLConnection.rollback(Handler<AsyncResult<Void>> handler)
Rolls back all changes made since the previous commit/rollback.
|
SQLConnection |
SQLConnection.setAutoCommit(boolean autoCommit,
Handler<AsyncResult<Void>> resultHandler)
Sets the auto commit flag for this connection.
|
SQLConnection |
SQLConnection.setTransactionIsolation(TransactionIsolation isolation,
Handler<AsyncResult<Void>> handler)
Attempts to change the transaction isolation level for this Connection object to the one given.
|
SQLConnection |
SQLConnection.update(String sql,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given SQL statement which may be an
INSERT, UPDATE, or DELETE
statement. |
default SQLClient |
SQLClient.update(String sql,
Handler<AsyncResult<UpdateResult>> handler)
Executes the given SQL statement which may be an
INSERT, UPDATE, or DELETE
statement. |
SQLOperations |
SQLOperations.update(String sql,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given SQL statement which may be an
INSERT, UPDATE, or DELETE
statement. |
SQLConnection |
SQLConnection.updateWithParams(String sql,
JsonArray params,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given prepared statement which may be an
INSERT, UPDATE, or DELETE
statement with the given parameters |
default SQLClient |
SQLClient.updateWithParams(String sql,
JsonArray params,
Handler<AsyncResult<UpdateResult>> handler)
Executes the given prepared statement which may be an
INSERT, UPDATE, or DELETE
statement with the given parameters |
SQLOperations |
SQLOperations.updateWithParams(String sql,
JsonArray params,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given prepared statement which may be an
INSERT, UPDATE, or DELETE
statement with the given parameters |
| Modifier and Type | Method and Description |
|---|---|
StompClientConnection |
StompClientConnection.abort(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Aborts a transaction.
|
StompClientConnection |
StompClientConnection.abort(String id,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Aborts a transaction.
|
StompClientConnection |
StompClientConnection.ack(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Sends an acknowledgement for a specific message.
|
StompClientConnection |
StompClientConnection.ack(String id,
String txId,
Handler<AsyncResult<Frame>> receiptHandler)
Sends an acknowledgement for the given frame.
|
StompClientConnection |
StompClientConnection.beginTX(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Begins a transaction.
|
StompClientConnection |
StompClientConnection.beginTX(String id,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Begins a transaction.
|
void |
StompServer.close(Handler<AsyncResult<Void>> completionHandler)
Closes the server.
|
StompClientConnection |
StompClientConnection.commit(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Commits a transaction.
|
StompClientConnection |
StompClientConnection.commit(String id,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Commits a transaction.
|
StompClient |
StompClient.connect(Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server using the host and port configured in the client's options.
|
StompClient |
StompClient.connect(int port,
String host,
Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server.
|
StompClient |
StompClient.connect(int port,
String host,
NetClient net,
Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server.
|
StompClient |
StompClient.connect(NetClient net,
Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server.
|
StompClientConnection |
StompClientConnection.disconnect(Frame frame,
Handler<AsyncResult<Frame>> receiptHandler)
Disconnects the client.
|
StompClientConnection |
StompClientConnection.disconnect(Handler<AsyncResult<Frame>> receiptHandler)
Disconnects the client.
|
StompServer |
StompServer.listen(Handler<AsyncResult<StompServer>> handler)
Connects the STOMP server default port (61613) and network interface (
0.0.0.0). |
StompServer |
StompServer.listen(int port,
Handler<AsyncResult<StompServer>> handler)
Connects the STOMP server to the given port.
|
StompServer |
StompServer.listen(int port,
String host,
Handler<AsyncResult<StompServer>> handler)
Connects the STOMP server to the given port / interface.
|
StompClientConnection |
StompClientConnection.nack(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a non-acknowledgement for the given message.
|
StompClientConnection |
StompClientConnection.nack(String id,
String txId,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a non-acknowledgement for the given frame.
|
StompServerHandler |
StompServerHandler.onAuthenticationRequest(StompServerConnection connection,
String login,
String passcode,
Handler<AsyncResult<Boolean>> handler)
Called when the client connects to a server requiring authentication.
|
StompClientConnection |
StompClientConnection.send(Frame frame,
Handler<AsyncResult<Frame>> receiptHandler)
Sends the given frame to the server.
|
StompClientConnection |
StompClientConnection.send(Map<String,String> headers,
Buffer body,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a
SEND frame to the server. |
StompClientConnection |
StompClientConnection.send(String destination,
Buffer body,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a
SEND frame to the server to the given destination. |
StompClientConnection |
StompClientConnection.send(String destination,
Map<String,String> headers,
Buffer body,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a
SEND frame to the server to the given destination. |
StompClientConnection |
StompClientConnection.subscribe(String destination,
Handler<Frame> handler,
Handler<AsyncResult<String>> receiptHandler)
Subscribes to the given destination.
|
StompClientConnection |
StompClientConnection.subscribe(String destination,
Map<String,String> headers,
Handler<Frame> handler,
Handler<AsyncResult<String>> receiptHandler)
Subscribes to the given destination.
|
StompClientConnection |
StompClientConnection.unsubscribe(String destination,
Handler<AsyncResult<Frame>> receiptHandler)
Un-subscribes from the given destination.
|
StompClientConnection |
StompClientConnection.unsubscribe(String destination,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Un-subscribes from the given destination.
|
| Modifier and Type | Method and Description |
|---|---|
static <T> T |
Sync.awaitResult(java.util.function.Consumer<Handler<AsyncResult<T>>> consumer)
Deprecated.
Invoke an asynchronous operation and obtain the result synchronous.
|
static <T> T |
Sync.awaitResult(java.util.function.Consumer<Handler<AsyncResult<T>>> consumer,
long timeout)
Deprecated.
Invoke an asynchronous operation and obtain the result synchronous.
|
| Modifier and Type | Method and Description |
|---|---|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertFailure()
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a failed result it completes the async operation.
When the returned handler is called back with a succeeded result it fails the test.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertFailure(Handler<Throwable> causeHandler)
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a failed result it completes the async operation.
When the returned handler is called back with a succeeded result it fails the test.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertSuccess()
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a succeeded result it completes the async operation.
When the returned handler is called back with a failed result it fails the test with the cause of the failure.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertSuccess(Handler<T> resultHandler)
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a succeeded result it invokes the
resultHandler argument
with the async result. |
| Modifier and Type | Method and Description |
|---|---|
void |
Completion.handler(Handler<AsyncResult<T>> completionHandler)
Completion handler to receive a completion signal when this completions completes.
|
| Modifier and Type | Method and Description |
|---|---|
int |
RoutingContext.addEndHandler(Handler<AsyncResult<Void>> handler)
Add an end handler for the request/response context.
|
default RoutingContext |
RoutingContext.end(Buffer buffer,
Handler<AsyncResult<Void>> handler)
|
default RoutingContext |
RoutingContext.end(Handler<AsyncResult<Void>> handler)
|
default RoutingContext |
RoutingContext.end(String chunk,
Handler<AsyncResult<Void>> handler)
|
default RoutingContext |
RoutingContext.json(Object json,
Handler<AsyncResult<Void>> handler)
|
default RoutingContext |
RoutingContext.redirect(String url,
Handler<AsyncResult<Void>> handler)
|
| Modifier and Type | Method and Description |
|---|---|
static void |
OpenAPI3RouterFactory.create(Vertx vertx,
String url,
Handler<AsyncResult<OpenAPI3RouterFactory>> handler)
Deprecated.
Create a new OpenAPI3RouterFactory
|
static void |
OpenAPI3RouterFactory.create(Vertx vertx,
String url,
List<JsonObject> auth,
Handler<AsyncResult<OpenAPI3RouterFactory>> handler)
Deprecated.
Create a new OpenAPI3RouterFactory
|
| Modifier and Type | Method and Description |
|---|---|
void |
HttpRequest.send(Handler<AsyncResult<HttpResponse<T>>> handler)
Send a request, the
handler will receive the response as an HttpResponse. |
void |
HttpRequest.sendBuffer(Buffer body,
Handler<AsyncResult<HttpResponse<T>>> handler)
Like
HttpRequest.send(Handler) but with an HTTP request body buffer. |
void |
HttpRequest.sendForm(MultiMap body,
Handler<AsyncResult<HttpResponse<T>>> handler)
Like
HttpRequest.send(Handler) but with an HTTP request body multimap encoded as form and the content type
set to application/x-www-form-urlencoded. |
void |
HttpRequest.sendForm(MultiMap body,
String charset,
Handler<AsyncResult<HttpResponse<T>>> handler)
Like
HttpRequest.send(Handler) but with an HTTP request body multimap encoded as form and the content type
set to application/x-www-form-urlencoded. |
void |
HttpRequest.sendJson(Object body,
Handler<AsyncResult<HttpResponse<T>>> handler)
Like
HttpRequest.send(Handler) but with an HTTP request body object encoded as json and the content type
set to application/json. |
void |
HttpRequest.sendJsonObject(JsonObject body,
Handler<AsyncResult<HttpResponse<T>>> handler)
Like
HttpRequest.send(Handler) but with an HTTP request body object encoded as json and the content type
set to application/json. |
void |
HttpRequest.sendMultipartForm(MultipartForm body,
Handler<AsyncResult<HttpResponse<T>>> handler)
Like
HttpRequest.send(Handler) but with an HTTP request body multimap encoded as form and the content type
set to multipart/form-data. |
void |
HttpRequest.sendStream(ReadStream<Buffer> body,
Handler<AsyncResult<HttpResponse<T>>> handler)
Like
HttpRequest.send(Handler) but with an HTTP request body stream. |
default void |
WebClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
WebClient.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
default void |
WebClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
WebClient.updateSSLOptions(SSLOptions) but supplying a handler that will be called when the update
happened (or has failed). |
| Modifier and Type | Method and Description |
|---|---|
default void |
CacheStore.delete(io.vertx.ext.web.client.impl.cache.CacheKey key,
Handler<AsyncResult<Void>> handler)
Delete all variations of a key from the cache.
|
default void |
CacheStore.flush(Handler<AsyncResult<Void>> handler)
Delete all entries from the cache.
|
default void |
CacheStore.get(io.vertx.ext.web.client.impl.cache.CacheKey key,
Handler<AsyncResult<io.vertx.ext.web.client.impl.cache.CachedHttpResponse>> handler)
Retrieve a cached response.
|
default void |
CacheStore.set(io.vertx.ext.web.client.impl.cache.CacheKey key,
io.vertx.ext.web.client.impl.cache.CachedHttpResponse response,
Handler<AsyncResult<io.vertx.ext.web.client.impl.cache.CachedHttpResponse>> handler)
Add a response in the cache with the given key.
|
| Modifier and Type | Method and Description |
|---|---|
void |
BodyCodec.create(Handler<AsyncResult<BodyStream<T>>> handler)
Create the
BodyStream. |
| Modifier and Type | Method and Description |
|---|---|
default void |
TemplateEngine.render(JsonObject context,
String templateFileName,
Handler<AsyncResult<Buffer>> handler)
Render the template.
|
void |
TemplateEngine.render(Map<String,Object> context,
String templateFileName,
Handler<AsyncResult<Buffer>> handler)
Render the template.
|
| Modifier and Type | Method and Description |
|---|---|
default SessionHandler |
SessionHandler.flush(RoutingContext ctx,
boolean ignoreStatus,
Handler<AsyncResult<Void>> handler)
Flush a context session earlier to the store, this will allow the end user to have full control on the event of
a failure at the store level.
|
default SessionHandler |
SessionHandler.flush(RoutingContext ctx,
Handler<AsyncResult<Void>> handler)
Flush a context session earlier to the store, this will allow the end user to have full control on the event of
a failure at the store level.
|
default SessionHandler |
SessionHandler.setUser(RoutingContext context,
User user,
Handler<AsyncResult<Void>> handler)
Set the user for the session
|
| Modifier and Type | Method and Description |
|---|---|
default void |
SockJSSocket.write(Buffer data,
Handler<AsyncResult<Void>> handler) |
default void |
SockJSSocket.write(String data,
Handler<AsyncResult<Void>> handler) |
| Modifier and Type | Method and Description |
|---|---|
static void |
RouterBuilder.create(Vertx vertx,
String url,
Handler<AsyncResult<RouterBuilder>> handler)
Like
this#create(Vertx, String) |
static void |
RouterBuilder.create(Vertx vertx,
String url,
OpenAPILoaderOptions options,
Handler<AsyncResult<RouterBuilder>> handler)
Like
this#create(Vertx, String, OpenAPILoaderOptions) |
| Modifier and Type | Method and Description |
|---|---|
default SessionStore |
SessionStore.clear(Handler<AsyncResult<Void>> resultHandler)
Remove all sessions from the store.
|
default SessionStore |
SessionStore.delete(String id,
Handler<AsyncResult<Void>> resultHandler)
Delete the session with the specified ID.
|
default SessionStore |
SessionStore.get(String cookieValue,
Handler<AsyncResult<Session>> resultHandler)
Get the session with the specified ID.
|
default SessionStore |
SessionStore.put(Session session,
Handler<AsyncResult<Void>> resultHandler)
Add a session with the specified ID.
|
default SessionStore |
SessionStore.size(Handler<AsyncResult<Integer>> resultHandler)
Get the number of sessions in the store.
|
| Modifier and Type | Method and Description |
|---|---|
VertxServer |
VertxServer.shutdown(Handler<AsyncResult<Void>> completionHandler) |
VertxServer |
VertxServer.start(Handler<AsyncResult<Void>> completionHandler) |
| Modifier and Type | Method and Description |
|---|---|
void |
GrpcWriteStream.end(Handler<AsyncResult<Void>> hndlr) |
void |
GrpcWriteStream.write(T data,
Handler<AsyncResult<Void>> hndlr) |
| Modifier and Type | Method and Description |
|---|---|
void |
SchemaRouter.resolveRef(JsonPointer pointer,
JsonPointer scope,
SchemaParser schemaParser,
Handler<AsyncResult<Schema>> handler)
Deprecated.
Like
SchemaRouter.resolveRef(JsonPointer, JsonPointer, SchemaParser) but with a direct callback. |
| Modifier and Type | Method and Description |
|---|---|
void |
SchemaRouterImpl.resolveRef(JsonPointer pointer,
JsonPointer scope,
SchemaParser schemaParser,
Handler<AsyncResult<Schema>> handler) |
| Modifier and Type | Method and Description |
|---|---|
<T> Handler<AsyncResult<T>> |
VertxTestContext.completing()
Deprecated.
Use
VertxTestContext.succeedingThenComplete() instead. |
<T> Handler<AsyncResult<T>> |
VertxTestContext.failing()
Deprecated.
Use
VertxTestContext.failingThenComplete() or VertxTestContext.failing(Handler), for example
failing(e -> checkpoint.flag()), failing(e -> { more testing code }), or
failing(e -> {}). |
<T> Handler<AsyncResult<T>> |
VertxTestContext.failing(Handler<Throwable> nextHandler)
Create an asynchronous result handler that expects a failure, and passes the exception to another handler.
|
<T> Handler<AsyncResult<T>> |
VertxTestContext.failingThenComplete()
Create an asynchronous result handler that expects a failure to then complete the test context.
|
<T> Handler<AsyncResult<T>> |
VertxTestContext.succeeding()
Deprecated.
Use
VertxTestContext.succeedingThenComplete() or VertxTestContext.succeeding(Handler), for example
succeeding(value -> checkpoint.flag()), succeeding(value -> { more testing code }), or
succeeding(value -> {}). |
<T> Handler<AsyncResult<T>> |
VertxTestContext.succeeding(Handler<T> nextHandler)
Create an asynchronous result handler that expects a success, and passes the value to another handler.
|
<T> Handler<AsyncResult<T>> |
VertxTestContext.succeedingThenComplete()
Create an asynchronous result handler that expects a success to then complete the test context.
|
| Modifier and Type | Method and Description |
|---|---|
void |
KafkaAdminClient.alterConfigs(Map<ConfigResource,Config> configs,
Handler<AsyncResult<Void>> completionHandler)
Update the configuration for the specified resources with the default options
|
void |
KafkaAdminClient.alterConsumerGroupOffsets(String groupId,
Map<TopicPartition,OffsetAndMetadata> offsets,
Handler<AsyncResult<Void>> completionHandler)
Alter committed offsets for a set of partitions in a consumer group.
|
void |
KafkaAdminClient.close(Handler<AsyncResult<Void>> handler)
Close the admin client
|
void |
KafkaAdminClient.close(long timeout,
Handler<AsyncResult<Void>> handler)
Close the admin client
|
void |
KafkaAdminClient.createAcls(List<org.apache.kafka.common.acl.AclBinding> aclBindings,
Handler<AsyncResult<List<org.apache.kafka.common.acl.AclBinding>>> completionHandler)
Create the ACL rules.
|
void |
KafkaAdminClient.createPartitions(Map<String,NewPartitions> partitions,
Handler<AsyncResult<Void>> completionHandler)
Creates a batch of new partitions in the Kafka topic
|
void |
KafkaAdminClient.createTopics(List<NewTopic> topics,
Handler<AsyncResult<Void>> completionHandler)
Creates a batch of new Kafka topics
|
void |
KafkaAdminClient.deleteAcls(List<org.apache.kafka.common.acl.AclBindingFilter> aclBindings,
Handler<AsyncResult<List<org.apache.kafka.common.acl.AclBinding>>> completionHandler)
Delete the ACL rules.
|
void |
KafkaAdminClient.deleteConsumerGroupOffsets(String groupId,
Set<TopicPartition> partitions,
Handler<AsyncResult<Void>> completionHandler)
Delete committed offsets for a set of partitions in a consumer group.
|
void |
KafkaAdminClient.deleteConsumerGroups(List<String> groupIds,
Handler<AsyncResult<Void>> completionHandler)
Delete consumer groups from the cluster.
|
void |
KafkaAdminClient.deleteRecords(Map<TopicPartition,org.apache.kafka.clients.admin.RecordsToDelete> recordsToDelete,
Handler<AsyncResult<Map<TopicPartition,org.apache.kafka.clients.admin.DeletedRecords>>> completionHandler)
Delete records from a topic partition.
|
void |
KafkaAdminClient.deleteTopics(List<String> topicNames,
Handler<AsyncResult<Void>> completionHandler)
Deletes a batch of Kafka topics
|
void |
KafkaAdminClient.describeAcls(org.apache.kafka.common.acl.AclBindingFilter aclBindingFilter,
Handler<AsyncResult<List<org.apache.kafka.common.acl.AclBinding>>> completionHandler)
Describe the ACL rules.
|
void |
KafkaAdminClient.describeCluster(DescribeClusterOptions options,
Handler<AsyncResult<ClusterDescription>> completionHandler)
Like
KafkaAdminClient.describeCluster(Handler) but allows customized options. |
void |
KafkaAdminClient.describeCluster(Handler<AsyncResult<ClusterDescription>> completionHandler)
Describe the nodes in the cluster with the default options
|
void |
KafkaAdminClient.describeConfigs(List<ConfigResource> configResources,
Handler<AsyncResult<Map<ConfigResource,Config>>> completionHandler)
Get the configuration for the specified resources with the default options
|
void |
KafkaAdminClient.describeConsumerGroups(List<String> groupIds,
DescribeConsumerGroupsOptions options,
Handler<AsyncResult<Map<String,ConsumerGroupDescription>>> completionHandler)
Like
KafkaAdminClient.describeConsumerGroups(List, Handler) but allows customized options |
void |
KafkaAdminClient.describeConsumerGroups(List<String> groupIds,
Handler<AsyncResult<Map<String,ConsumerGroupDescription>>> completionHandler)
Describe some group ids in the cluster, with the default options
|
void |
KafkaAdminClient.describeLogDirs(List<Integer> brokers,
Handler<AsyncResult<Map<Integer,Map<String,org.apache.kafka.clients.admin.LogDirDescription>>>> completionHandler)
Query the information of all log directories on the given set of brokers
|
void |
KafkaAdminClient.describeTopics(List<String> topicNames,
DescribeTopicsOptions options,
Handler<AsyncResult<Map<String,TopicDescription>>> completionHandler)
Like
KafkaAdminClient.describeTopics(List, Handler) but allows for customised otions |
void |
KafkaAdminClient.describeTopics(List<String> topicNames,
Handler<AsyncResult<Map<String,TopicDescription>>> completionHandler)
Describe some topics in the cluster, with the default options.
|
default void |
KafkaAdminClient.listConsumerGroupOffsets(String groupId,
Handler<AsyncResult<Map<TopicPartition,OffsetAndMetadata>>> completionHandler)
List the consumer group offsets available in the cluster.
|
void |
KafkaAdminClient.listConsumerGroupOffsets(String groupId,
ListConsumerGroupOffsetsOptions options,
Handler<AsyncResult<Map<TopicPartition,OffsetAndMetadata>>> completionHandler)
List the consumer group offsets available in the cluster.
|
void |
KafkaAdminClient.listConsumerGroups(Handler<AsyncResult<List<ConsumerGroupListing>>> completionHandler)
Get the the consumer groups available in the cluster with the default options
|
void |
KafkaAdminClient.listOffsets(Map<TopicPartition,OffsetSpec> topicPartitionOffsets,
Handler<AsyncResult<Map<TopicPartition,ListOffsetsResultInfo>>> completionHandler)
List the offsets available for a set of partitions.
|
void |
KafkaAdminClient.listTopics(Handler<AsyncResult<Set<String>>> completionHandler)
List the topics available in the cluster with the default options.
|
| Modifier and Type | Method and Description |
|---|---|
KafkaReadStream<K,V> |
KafkaReadStream.assign(Set<org.apache.kafka.common.TopicPartition> partitions,
Handler<AsyncResult<Void>> completionHandler)
Manually assign a set of partitions to this consumer.
|
KafkaConsumer<K,V> |
KafkaConsumer.assign(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Manually assign a list of partition to this consumer.
|
KafkaConsumer<K,V> |
KafkaConsumer.assign(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Manually assign a partition to this consumer.
|
KafkaReadStream<K,V> |
KafkaReadStream.assignment(Handler<AsyncResult<Set<org.apache.kafka.common.TopicPartition>>> handler)
Get the set of partitions currently assigned to this consumer.
|
KafkaConsumer<K,V> |
KafkaConsumer.assignment(Handler<AsyncResult<Set<TopicPartition>>> handler)
Get the set of partitions currently assigned to this consumer.
|
void |
KafkaReadStream.beginningOffsets(Set<org.apache.kafka.common.TopicPartition> topicPartitions,
Handler<AsyncResult<Map<org.apache.kafka.common.TopicPartition,Long>>> handler)
Get the first offset for the given partitions.
|
void |
KafkaConsumer.beginningOffsets(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Map<TopicPartition,Long>>> handler)
Get the first offset for the given partitions.
|
void |
KafkaReadStream.beginningOffsets(org.apache.kafka.common.TopicPartition topicPartition,
Handler<AsyncResult<Long>> handler)
Get the first offset for the given partition.
|
void |
KafkaConsumer.beginningOffsets(TopicPartition topicPartition,
Handler<AsyncResult<Long>> handler)
Get the first offset for the given partitions.
|
void |
KafkaReadStream.close(Handler<AsyncResult<Void>> completionHandler)
Close the stream
|
void |
KafkaConsumer.close(Handler<AsyncResult<Void>> completionHandler)
Close the consumer
|
void |
KafkaReadStream.commit(Handler<AsyncResult<Map<org.apache.kafka.common.TopicPartition,org.apache.kafka.clients.consumer.OffsetAndMetadata>>> completionHandler)
Commit current offsets for all the subscribed list of topics and partition.
|
void |
KafkaConsumer.commit(Handler<AsyncResult<Void>> completionHandler)
Commit current offsets for all the subscribed list of topics and partition.
|
void |
KafkaReadStream.commit(Map<org.apache.kafka.common.TopicPartition,org.apache.kafka.clients.consumer.OffsetAndMetadata> offsets,
Handler<AsyncResult<Map<org.apache.kafka.common.TopicPartition,org.apache.kafka.clients.consumer.OffsetAndMetadata>>> completionHandler)
Commit the specified offsets for the specified list of topics and partitions to Kafka.
|
void |
KafkaConsumer.commit(Map<TopicPartition,OffsetAndMetadata> offsets,
Handler<AsyncResult<Map<TopicPartition,OffsetAndMetadata>>> completionHandler)
Commit the specified offsets for the specified list of topics and partitions to Kafka.
|
void |
KafkaReadStream.committed(org.apache.kafka.common.TopicPartition topicPartition,
Handler<AsyncResult<org.apache.kafka.clients.consumer.OffsetAndMetadata>> handler)
Get the last committed offset for the given partition (whether the commit happened by this process or another).
|
void |
KafkaConsumer.committed(TopicPartition topicPartition,
Handler<AsyncResult<OffsetAndMetadata>> handler)
Get the last committed offset for the given partition (whether the commit happened by this process or another).
|
void |
KafkaReadStream.endOffsets(Set<org.apache.kafka.common.TopicPartition> topicPartitions,
Handler<AsyncResult<Map<org.apache.kafka.common.TopicPartition,Long>>> handler)
Get the last offset for the given partitions.
|
void |
KafkaConsumer.endOffsets(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Map<TopicPartition,Long>>> handler)
Get the last offset for the given partitions.
|
void |
KafkaReadStream.endOffsets(org.apache.kafka.common.TopicPartition topicPartition,
Handler<AsyncResult<Long>> handler)
Get the last offset for the given partition.
|
void |
KafkaConsumer.endOffsets(TopicPartition topicPartition,
Handler<AsyncResult<Long>> handler)
Get the last offset for the given partition.
|
KafkaReadStream<K,V> |
KafkaReadStream.listTopics(Handler<AsyncResult<Map<String,List<org.apache.kafka.common.PartitionInfo>>>> handler)
Get metadata about partitions for all topics that the user is authorized to view.
|
KafkaConsumer<K,V> |
KafkaConsumer.listTopics(Handler<AsyncResult<Map<String,List<PartitionInfo>>>> handler)
Get metadata about partitions for all topics that the user is authorized to view.
|
void |
KafkaReadStream.offsetsForTimes(Map<org.apache.kafka.common.TopicPartition,Long> topicPartitionTimestamps,
Handler<AsyncResult<Map<org.apache.kafka.common.TopicPartition,org.apache.kafka.clients.consumer.OffsetAndTimestamp>>> handler)
Look up the offsets for the given partitions by timestamp.
|
void |
KafkaConsumer.offsetsForTimes(Map<TopicPartition,Long> topicPartitionTimestamps,
Handler<AsyncResult<Map<TopicPartition,OffsetAndTimestamp>>> handler)
Look up the offsets for the given partitions by timestamp.
|
void |
KafkaReadStream.offsetsForTimes(org.apache.kafka.common.TopicPartition topicPartition,
long timestamp,
Handler<AsyncResult<org.apache.kafka.clients.consumer.OffsetAndTimestamp>> handler)
* Look up the offset for the given partition by timestamp.
|
void |
KafkaConsumer.offsetsForTimes(TopicPartition topicPartition,
Long timestamp,
Handler<AsyncResult<OffsetAndTimestamp>> handler)
Look up the offset for the given partition by timestamp.
|
KafkaReadStream<K,V> |
KafkaReadStream.partitionsFor(String topic,
Handler<AsyncResult<List<org.apache.kafka.common.PartitionInfo>>> handler)
Get metadata about the partitions for a given topic.
|
KafkaConsumer<K,V> |
KafkaConsumer.partitionsFor(String topic,
Handler<AsyncResult<List<PartitionInfo>>> handler)
Get metadata about the partitions for a given topic.
|
KafkaReadStream<K,V> |
KafkaReadStream.pause(Set<org.apache.kafka.common.TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Suspend fetching from the requested partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.pause(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Suspend fetching from the requested partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.pause(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Suspend fetching from the requested partition.
|
void |
KafkaReadStream.paused(Handler<AsyncResult<Set<org.apache.kafka.common.TopicPartition>>> handler)
Get the set of partitions that were previously paused by a call to
KafkaReadStream.pause(Set). |
void |
KafkaConsumer.paused(Handler<AsyncResult<Set<TopicPartition>>> handler)
Get the set of partitions that were previously paused by a call to pause(Set).
|
void |
KafkaReadStream.poll(java.time.Duration timeout,
Handler<AsyncResult<org.apache.kafka.clients.consumer.ConsumerRecords<K,V>>> handler)
Executes a poll for getting messages from Kafka.
|
void |
KafkaConsumer.poll(java.time.Duration timeout,
Handler<AsyncResult<KafkaConsumerRecords<K,V>>> handler)
Executes a poll for getting messages from Kafka.
|
void |
KafkaReadStream.position(org.apache.kafka.common.TopicPartition partition,
Handler<AsyncResult<Long>> handler)
Get the offset of the next record that will be fetched (if a record with that offset exists).
|
void |
KafkaConsumer.position(TopicPartition partition,
Handler<AsyncResult<Long>> handler)
Get the offset of the next record that will be fetched (if a record with that offset exists).
|
KafkaReadStream<K,V> |
KafkaReadStream.resume(Set<org.apache.kafka.common.TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Resume specified partitions which have been paused with pause.
|
KafkaConsumer<K,V> |
KafkaConsumer.resume(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Resume specified partitions which have been paused with pause.
|
KafkaConsumer<K,V> |
KafkaConsumer.resume(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Resume specified partition which have been paused with pause.
|
KafkaReadStream<K,V> |
KafkaReadStream.seek(org.apache.kafka.common.TopicPartition topicPartition,
long offset,
Handler<AsyncResult<Void>> completionHandler)
Overrides the fetch offsets that the consumer will use on the next poll.
|
KafkaConsumer<K,V> |
KafkaConsumer.seek(TopicPartition topicPartition,
long offset,
Handler<AsyncResult<Void>> completionHandler)
Overrides the fetch offsets that the consumer will use on the next poll.
|
KafkaReadStream<K,V> |
KafkaReadStream.seekToBeginning(Set<org.apache.kafka.common.TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Seek to the first offset for each of the given partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToBeginning(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Seek to the first offset for each of the given partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToBeginning(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Seek to the first offset for each of the given partition.
|
KafkaReadStream<K,V> |
KafkaReadStream.seekToEnd(Set<org.apache.kafka.common.TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Seek to the last offset for each of the given partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToEnd(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Seek to the last offset for each of the given partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToEnd(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Seek to the last offset for each of the given partition.
|
KafkaReadStream<K,V> |
KafkaReadStream.subscribe(Pattern pattern,
Handler<AsyncResult<Void>> completionHandler)
Subscribe to all topics matching specified pattern to get dynamically assigned partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscribe(Pattern pattern,
Handler<AsyncResult<Void>> completionHandler)
Subscribe to all topics matching specified pattern to get dynamically assigned partitions.
|
KafkaReadStream<K,V> |
KafkaReadStream.subscribe(Set<String> topics,
Handler<AsyncResult<Void>> completionHandler)
Subscribe to the given list of topics to get dynamically assigned partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscribe(Set<String> topics,
Handler<AsyncResult<Void>> completionHandler)
Subscribe to the given list of topics to get dynamically assigned partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscribe(String topic,
Handler<AsyncResult<Void>> completionHandler)
Subscribe to the given topic to get dynamically assigned partitions.
|
KafkaReadStream<K,V> |
KafkaReadStream.subscription(Handler<AsyncResult<Set<String>>> handler)
Get the current subscription.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscription(Handler<AsyncResult<Set<String>>> handler)
Get the current subscription.
|
KafkaReadStream<K,V> |
KafkaReadStream.unsubscribe(Handler<AsyncResult<Void>> completionHandler)
Unsubscribe from topics currently subscribed with subscribe.
|
KafkaConsumer<K,V> |
KafkaConsumer.unsubscribe(Handler<AsyncResult<Void>> completionHandler)
Unsubscribe from topics currently subscribed with subscribe.
|
| Modifier and Type | Method and Description |
|---|---|
KafkaProducer<K,V> |
KafkaProducer.abortTransaction(Handler<AsyncResult<Void>> handler)
Aborts the ongoing transaction.
|
KafkaWriteStream<K,V> |
KafkaWriteStream.abortTransaction(Handler<AsyncResult<Void>> handler)
Aborts the ongoing transaction.
|
KafkaProducer<K,V> |
KafkaProducer.beginTransaction(Handler<AsyncResult<Void>> handler)
Starts a new kafka transaction.
|
KafkaWriteStream<K,V> |
KafkaWriteStream.beginTransaction(Handler<AsyncResult<Void>> handler)
Starts a new kafka transaction.
|
void |
KafkaProducer.close(Handler<AsyncResult<Void>> completionHandler)
Close the producer
|
void |
KafkaWriteStream.close(Handler<AsyncResult<Void>> completionHandler)
Close the stream
|
void |
KafkaProducer.close(long timeout,
Handler<AsyncResult<Void>> completionHandler)
Close the producer
|
void |
KafkaWriteStream.close(long timeout,
Handler<AsyncResult<Void>> completionHandler)
Close the stream
|
KafkaProducer<K,V> |
KafkaProducer.commitTransaction(Handler<AsyncResult<Void>> handler)
Commits the ongoing transaction.
|
KafkaWriteStream<K,V> |
KafkaWriteStream.commitTransaction(Handler<AsyncResult<Void>> handler)
Commits the ongoing transaction.
|
KafkaProducer<K,V> |
KafkaProducer.flush(Handler<AsyncResult<Void>> completionHandler)
Invoking this method makes all buffered records immediately available to write
|
KafkaWriteStream<K,V> |
KafkaWriteStream.flush(Handler<AsyncResult<Void>> completionHandler)
Invoking this method makes all buffered records immediately available to write
|
KafkaProducer<K,V> |
KafkaProducer.initTransactions(Handler<AsyncResult<Void>> handler)
Initializes the underlying kafka transactional producer.
|
KafkaWriteStream<K,V> |
KafkaWriteStream.initTransactions(Handler<AsyncResult<Void>> handler)
Initializes the underlying kafka transactional producer.
|
KafkaProducer<K,V> |
KafkaProducer.partitionsFor(String topic,
Handler<AsyncResult<List<PartitionInfo>>> handler)
Get the partition metadata for the give topic.
|
KafkaWriteStream<K,V> |
KafkaWriteStream.partitionsFor(String topic,
Handler<AsyncResult<List<org.apache.kafka.common.PartitionInfo>>> handler)
Get the partition metadata for the give topic.
|
KafkaProducer<K,V> |
KafkaProducer.send(KafkaProducerRecord<K,V> record,
Handler<AsyncResult<RecordMetadata>> handler)
Asynchronously write a record to a topic
|
KafkaWriteStream<K,V> |
KafkaWriteStream.send(org.apache.kafka.clients.producer.ProducerRecord<K,V> record,
Handler<AsyncResult<org.apache.kafka.clients.producer.RecordMetadata>> handler)
Asynchronously write a record to a topic
|
| Modifier and Type | Method and Description |
|---|---|
static boolean |
VertxExtensionModule.asBoolean(AsyncResult self)
Coerces an
AsyncResult as a boolean value according to Groovy-Truth. |
| Modifier and Type | Method and Description |
|---|---|
void |
MqttServer.close(Handler<AsyncResult<Void>> completionHandler)
Close the server supplying an handler that will be called when the server is actually closed (or has failed).
|
MqttClient |
MqttClient.connect(int port,
String host,
Handler<AsyncResult<MqttConnAckMessage>> connectHandler)
Connects to an MQTT server calling connectHandler after connection
|
MqttClient |
MqttClient.connect(int port,
String host,
String serverName,
Handler<AsyncResult<MqttConnAckMessage>> connectHandler)
Connects to an MQTT server calling connectHandler after connection
|
MqttClient |
MqttClient.disconnect(Handler<AsyncResult<Void>> disconnectHandler)
Disconnects from the MQTT server calling disconnectHandler after disconnection
|
MqttServer |
MqttServer.listen(Handler<AsyncResult<MqttServer>> listenHandler)
Start the server listening for incoming connections using the specified options
through the constructor
|
MqttServer |
MqttServer.listen(int port,
Handler<AsyncResult<MqttServer>> listenHandler)
Start the server listening for incoming connections on the port specified but on
"0.0.0.0" as host.
|
MqttServer |
MqttServer.listen(int port,
String host,
Handler<AsyncResult<MqttServer>> listenHandler)
Start the server listening for incoming connections on the port and host specified
It ignores any options specified through the constructor
|
MqttClient |
MqttClient.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server
|
MqttEndpoint |
MqttEndpoint.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server
|
MqttEndpoint |
MqttEndpoint.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
int messageId,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server explicitly specifying the messageId
|
MqttEndpoint |
MqttEndpoint.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
int messageId,
MqttProperties properties,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server explicitly specifying the messageId
|
MqttClient |
MqttClient.subscribe(Map<String,Integer> topics,
Handler<AsyncResult<Integer>> subscribeSentHandler)
Subscribes to the topic and adds a handler which will be called after the request is sent
|
MqttClient |
MqttClient.subscribe(String topic,
int qos,
Handler<AsyncResult<Integer>> subscribeSentHandler)
Subscribes to the topic with a specified QoS level
|
MqttClient |
MqttClient.unsubscribe(List<String> topics,
Handler<AsyncResult<Integer>> unsubscribeSentHandler)
Unsubscribe from receiving messages on given topics
|
MqttClient |
MqttClient.unsubscribe(String topic,
Handler<AsyncResult<Integer>> unsubscribeSentHandler)
Unsubscribe from receiving messages on given topic
|
| Modifier and Type | Method and Description |
|---|---|
static void |
MSSQLConnection.connect(Vertx vertx,
MSSQLConnectOptions connectOptions,
Handler<AsyncResult<MSSQLConnection>> handler)
Create a connection to SQL Server with the given
connectOptions. |
static void |
MSSQLConnection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<MSSQLConnection>> handler)
Like
MSSQLConnection.connect(Vertx, MSSQLConnectOptions, Handler) with options built from connectionUri. |
MSSQLConnection |
MSSQLConnection.prepare(String s,
Handler<AsyncResult<PreparedStatement>> handler)
Create a prepared statement using the given
sql string. |
| Modifier and Type | Method and Description |
|---|---|
MySQLConnection |
MySQLConnection.changeUser(MySQLAuthOptions options,
Handler<AsyncResult<Void>> handler)
Send a CHANGE_USER command to change the user of the current connection, this operation will also reset connection state.
|
static void |
MySQLConnection.connect(Vertx vertx,
MySQLConnectOptions connectOptions,
Handler<AsyncResult<MySQLConnection>> handler)
Create a connection to MySQL server with the given
connectOptions. |
static void |
MySQLConnection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<MySQLConnection>> handler)
Like
MySQLConnection.connect(Vertx, MySQLConnectOptions, Handler) with options built from connectionUri. |
MySQLConnection |
MySQLConnection.debug(Handler<AsyncResult<Void>> handler)
Send a DEBUG command to dump debug information to the server's stdout.
|
MySQLConnection |
MySQLConnection.getInternalStatistics(Handler<AsyncResult<String>> handler)
Send a STATISTICS command to get a human readable string of the server internal status.
|
MySQLConnection |
MySQLConnection.ping(Handler<AsyncResult<Void>> handler)
Send a PING command to check if the server is alive.
|
MySQLConnection |
MySQLConnection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler)
Create a prepared statement using the given
sql string. |
MySQLConnection |
MySQLConnection.resetConnection(Handler<AsyncResult<Void>> handler)
Send a RESET_CONNECTION command to reset the session state.
|
MySQLConnection |
MySQLConnection.setOption(MySQLSetOption option,
Handler<AsyncResult<Void>> handler)
Send a SET_OPTION command to set options for the current connection.
|
MySQLConnection |
MySQLConnection.specifySchema(String schemaName,
Handler<AsyncResult<Void>> handler)
Send a INIT_DB command to change the default schema of the connection.
|
| Modifier and Type | Method and Description |
|---|---|
PgConnection |
PgConnection.cancelRequest(Handler<AsyncResult<Void>> handler)
Send a request cancellation message to tell the server to cancel processing request in this connection.
|
static void |
PgConnection.connect(Vertx vertx,
Handler<AsyncResult<PgConnection>> handler)
Like
PgConnection.connect(Vertx, PgConnectOptions, Handler) with options build from the environment variables. |
static void |
PgConnection.connect(Vertx vertx,
PgConnectOptions options,
Handler<AsyncResult<PgConnection>> handler)
Connects to the database and returns the connection if that succeeds.
|
static void |
PgConnection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<PgConnection>> handler)
Like
PgConnection.connect(Vertx, PgConnectOptions, Handler) with options build from connectionUri. |
PgConnection |
PgConnection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler)
Create a prepared statement using the given
sql string. |
| Modifier and Type | Method and Description |
|---|---|
void |
PgSubscriber.close(Handler<AsyncResult<Void>> handler)
Close the subscriber, the retry policy will not be invoked.
|
PgSubscriber |
PgSubscriber.connect(Handler<AsyncResult<Void>> handler)
Connect the subscriber to Postgres.
|
| Modifier and Type | Method and Description |
|---|---|
void |
RabbitMQClient.addConfirmListener(int maxQueueSize,
Handler<AsyncResult<ReadStream<RabbitMQConfirmation>>> resultHandler)
Add a Confirm Listener to the channel.
|
void |
RabbitMQClient.basicAck(long deliveryTag,
boolean multiple,
Handler<AsyncResult<Void>> resultHandler)
Acknowledge one or several received messages.
|
default void |
RabbitMQClient.basicConsumer(String queue,
Handler<AsyncResult<RabbitMQConsumer>> resultHandler) |
void |
RabbitMQClient.basicConsumer(String queue,
QueueOptions options,
Handler<AsyncResult<RabbitMQConsumer>> resultHandler)
Create a consumer with the given
options. |
void |
RabbitMQClient.basicGet(String queue,
boolean autoAck,
Handler<AsyncResult<RabbitMQMessage>> resultHandler)
Retrieve a message from a queue using AMQP.Basic.Get
|
void |
RabbitMQClient.basicNack(long deliveryTag,
boolean multiple,
boolean requeue,
Handler<AsyncResult<Void>> resultHandler)
Reject one or several received messages.
|
void |
RabbitMQClient.basicPublish(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQClient.basicPublish(String exchange,
String routingKey,
Buffer body,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQClient.basicPublishWithDeliveryTag(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<Long> deliveryTagHandler,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
default void |
RabbitMQClient.basicQos(int prefetchCount,
boolean global,
Handler<AsyncResult<Void>> resultHandler)
Request a specific prefetchCount "quality of service" settings
for this channel.
|
default void |
RabbitMQClient.basicQos(int prefetchCount,
Handler<AsyncResult<Void>> resultHandler)
Request a specific prefetchCount "quality of service" settings
for this channel.
|
void |
RabbitMQClient.basicQos(int prefetchSize,
int prefetchCount,
boolean global,
Handler<AsyncResult<Void>> resultHandler)
Request specific "quality of service" settings.
|
void |
RabbitMQConsumer.cancel(Handler<AsyncResult<Void>> cancelResult)
Stop message consumption from a queue.
|
void |
RabbitMQClient.confirmSelect(Handler<AsyncResult<Void>> resultHandler)
Enables publisher acknowledgements on this channel.
|
void |
RabbitMQClient.exchangeBind(String destination,
String source,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Bind an exchange to an exchange.
|
void |
RabbitMQClient.exchangeBind(String destination,
String source,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Bind an exchange to an exchange.
|
void |
RabbitMQClient.exchangeDeclare(String exchange,
String type,
boolean durable,
boolean autoDelete,
Handler<AsyncResult<Void>> resultHandler)
Declare an exchange.
|
void |
RabbitMQClient.exchangeDeclare(String exchange,
String type,
boolean durable,
boolean autoDelete,
JsonObject config,
Handler<AsyncResult<Void>> resultHandler)
Declare an exchange with additional parameters such as dead lettering, an alternate exchange or TTL.
|
void |
RabbitMQClient.exchangeDelete(String exchange,
Handler<AsyncResult<Void>> resultHandler)
Delete an exchange, without regard for whether it is in use or not.
|
void |
RabbitMQClient.exchangeUnbind(String destination,
String source,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Unbind an exchange from an exchange.
|
void |
RabbitMQClient.exchangeUnbind(String destination,
String source,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Unbind an exchange from an exchange.
|
void |
RabbitMQClient.messageCount(String queue,
Handler<AsyncResult<Long>> resultHandler)
Returns the number of messages in a queue ready to be delivered.
|
void |
RabbitMQPublisher.publish(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQPublisher.publishConfirm(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<AsyncResult<Long>> resultHandler)
Publish a message and complete when publish confirm has returned.
|
void |
RabbitMQClient.queueBind(String queue,
String exchange,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Bind a queue to an exchange
|
void |
RabbitMQClient.queueBind(String queue,
String exchange,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Bind a queue to an exchange
|
void |
RabbitMQClient.queueDeclare(String queue,
boolean durable,
boolean exclusive,
boolean autoDelete,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeclareOk>> resultHandler)
Declare a queue
|
void |
RabbitMQClient.queueDeclare(String queue,
boolean durable,
boolean exclusive,
boolean autoDelete,
JsonObject config,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeclareOk>> resultHandler)
Declare a queue with config options
|
void |
RabbitMQClient.queueDeclareAuto(Handler<AsyncResult<JsonObject>> resultHandler)
Actively declare a server-named exclusive, autodelete, non-durable queue.
|
void |
RabbitMQClient.queueDelete(String queue,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeleteOk>> resultHandler)
Delete a queue, without regard for whether it is in use or has messages on it
|
void |
RabbitMQClient.queueDeleteIf(String queue,
boolean ifUnused,
boolean ifEmpty,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeleteOk>> resultHandler)
Delete a queue
|
void |
RabbitMQClient.queueUnbind(String queue,
String exchange,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Unbind a queue from an exchange
|
void |
RabbitMQClient.queueUnbind(String queue,
String exchange,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Unbind a queue from an exchange
|
void |
RabbitMQClient.restartConnect(int attempts,
Handler<AsyncResult<Void>> resultHandler)
restart the rabbitMQ connect.
|
void |
RabbitMQClient.start(Handler<AsyncResult<Void>> resultHandler)
Start the rabbitMQ client.
|
void |
RabbitMQPublisher.start(Handler<AsyncResult<Void>> resultHandler)
Start the rabbitMQ publisher.
|
void |
RabbitMQClient.stop(Handler<AsyncResult<Void>> resultHandler)
Stop the rabbitMQ client.
|
void |
RabbitMQPublisher.stop(Handler<AsyncResult<Void>> resultHandler)
Stop the rabbitMQ publisher.
|
void |
RabbitMQClient.waitForConfirms(Handler<AsyncResult<Void>> resultHandler)
Wait until all messages published since the last call have been either ack'd or nack'd by the broker.
|
void |
RabbitMQClient.waitForConfirms(long timeout,
Handler<AsyncResult<Void>> resultHandler)
Wait until all messages published since the last call have been either ack'd or nack'd by the broker; or until timeout elapses.
|
| Modifier and Type | Method and Description |
|---|---|
static Completable |
CompletableHelper.toCompletable(java.util.function.Consumer<Handler<AsyncResult<Void>>> handler)
Returns a
Completable that, when subscribed, uses the provided handler to adapt a callback-based asynchronous method. |
static <T> Maybe<T> |
MaybeHelper.toMaybe(java.util.function.Consumer<Handler<AsyncResult<T>>> handler)
Returns a
Maybe that, when subscribed, uses the provided handler to adapt a callback-based asynchronous method. |
static <T> MaybeObserver<T> |
MaybeHelper.toObserver(Handler<AsyncResult<T>> handler)
Adapts an Vert.x
Handler<AsyncResult<T>> to an RxJava2 MaybeObserver. |
static <T> SingleObserver<T> |
SingleHelper.toObserver(Handler<AsyncResult<T>> handler)
Adapts an Vert.x
Handler<AsyncResult<T>> to an RxJava2 SingleObserver. |
static <T> CompletableObserver |
CompletableHelper.toObserver(Handler<AsyncResult<T>> handler)
Adapts an Vert.x
Handler<AsyncResult<T>> to an RxJava2 SingleObserver. |
static <T> Single<T> |
SingleHelper.toSingle(java.util.function.Consumer<Handler<AsyncResult<T>>> handler)
Returns a
Single that, when subscribed, uses the provided handler to adapt a callback-based asynchronous method. |
| Modifier and Type | Method and Description |
|---|---|
AmqpConnection |
AmqpConnection.close(Handler<AsyncResult<Void>> done)
Closes the AMQP connection, i.e.
|
void |
AmqpSender.close(Handler<AsyncResult<Void>> handler)
Closes the sender.
|
void |
AmqpReceiver.close(Handler<AsyncResult<Void>> handler)
Closes the receiver.
|
void |
AmqpClient.close(Handler<AsyncResult<Void>> closeHandler)
Closes the client.
|
AmqpClient |
AmqpClient.connect(Handler<AsyncResult<AmqpConnection>> connectionHandler)
Connects to the AMQP broker or router.
|
AmqpConnection |
AmqpConnection.createAnonymousSender(Handler<AsyncResult<AmqpSender>> completionHandler)
Creates an anonymous sender.
|
AmqpConnection |
AmqpConnection.createDynamicReceiver(Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a dynamic receiver.
|
AmqpConnection |
AmqpConnection.createReceiver(String address,
AmqpReceiverOptions receiverOptions,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consumer messages from the given address.
|
AmqpClient |
AmqpClient.createReceiver(String address,
AmqpReceiverOptions receiverOptions,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consumer messages from the given address.
|
AmqpConnection |
AmqpConnection.createReceiver(String address,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consume messages from the given address.
|
AmqpClient |
AmqpClient.createReceiver(String address,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consume messages from the given address.
|
AmqpConnection |
AmqpConnection.createSender(String address,
AmqpSenderOptions options,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpClient |
AmqpClient.createSender(String address,
AmqpSenderOptions options,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpConnection |
AmqpConnection.createSender(String address,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpClient |
AmqpClient.createSender(String address,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
void |
AmqpSender.end(AmqpMessage data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
AmqpSender.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
AmqpReceiver.pipeTo(WriteStream<AmqpMessage> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
AmqpSender |
AmqpSender.sendWithAck(AmqpMessage message,
Handler<AsyncResult<Void>> acknowledgementHandler)
Sends an AMQP message and waits for an acknowledgement.
|
void |
AmqpSender.write(AmqpMessage data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
ResultSet |
ResultSet.all(Handler<AsyncResult<List<com.datastax.oss.driver.api.core.cql.Row>>> handler)
The method should not be used concurrently with others like
ResultSet.fetchNextPage(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.cassandra.ResultSet>>) or . |
CassandraClient |
CassandraClient.close(Handler<AsyncResult<Void>> closeHandler)
Closes this client.
|
CassandraClient |
CassandraClient.execute(com.datastax.oss.driver.api.core.cql.Statement statement,
Handler<AsyncResult<ResultSet>> resultHandler)
Execute the statement and provide a handler for consuming results.
|
CassandraClient |
CassandraClient.execute(String query,
Handler<AsyncResult<ResultSet>> resultHandler)
Execute the query and provide a handler for consuming results.
|
CassandraClient |
CassandraClient.executeWithFullFetch(com.datastax.oss.driver.api.core.cql.Statement statement,
Handler<AsyncResult<List<com.datastax.oss.driver.api.core.cql.Row>>> resultHandler)
Execute the query and provide a handler for consuming results.
|
CassandraClient |
CassandraClient.executeWithFullFetch(String query,
Handler<AsyncResult<List<com.datastax.oss.driver.api.core.cql.Row>>> resultHandler)
Execute the query and provide a handler for consuming results.
|
void |
ResultSet.fetchNextPage(Handler<AsyncResult<ResultSet>> handler)
Like
ResultSet.fetchNextPage(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.cassandra.ResultSet>>) but with a direct callback. |
void |
CassandraClient.metadata(Handler<AsyncResult<com.datastax.oss.driver.api.core.metadata.Metadata>> handler)
Get for the session.
|
void |
CassandraRowStream.pipeTo(WriteStream<com.datastax.oss.driver.api.core.cql.Row> dst,
Handler<AsyncResult<Void>> handler) |
CassandraClient |
CassandraClient.prepare(com.datastax.oss.driver.api.core.cql.SimpleStatement statement,
Handler<AsyncResult<com.datastax.oss.driver.api.core.cql.PreparedStatement>> resultHandler)
Prepares the provided a .
|
CassandraClient |
CassandraClient.prepare(String query,
Handler<AsyncResult<com.datastax.oss.driver.api.core.cql.PreparedStatement>> resultHandler)
Prepares the provided query string.
|
CassandraClient |
CassandraClient.queryStream(com.datastax.oss.driver.api.core.cql.Statement statement,
Handler<AsyncResult<CassandraRowStream>> rowStreamHandler)
Executes the given SQL statement which returns the results of the query as a read stream.
|
CassandraClient |
CassandraClient.queryStream(String sql,
Handler<AsyncResult<CassandraRowStream>> rowStreamHandler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
| Modifier and Type | Method and Description |
|---|---|
<T> void |
CircuitBreaker.execute(Handler<Promise<T>> command,
Handler<AsyncResult<T>> handler)
Same as
CircuitBreaker.executeWithFallback(io.vertx.core.Handler<io.vertx.reactivex.core.Promise<T>>, java.util.function.Function<java.lang.Throwable, T>, io.vertx.core.Handler<io.vertx.core.AsyncResult<T>>) but using the circuit breaker default fallback. |
<T> void |
CircuitBreaker.executeWithFallback(Handler<Promise<T>> command,
java.util.function.Function<Throwable,T> fallback,
Handler<AsyncResult<T>> handler)
|
| Modifier and Type | Method and Description |
|---|---|
void |
ConfigRetriever.getConfig(Handler<AsyncResult<JsonObject>> completionHandler)
Reads the configuration from the different
and computes the final configuration.
|
| Modifier and Type | Method and Description |
|---|---|
void |
VertxBuilder.buildClustered(Handler<AsyncResult<Vertx>> handler)
Creates a clustered instance.
|
void |
Vertx.close(Handler<AsyncResult<Void>> completionHandler)
Like
Vertx.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but the completionHandler will be called when the close is complete |
void |
WorkerExecutor.close(Handler<AsyncResult<Void>> handler)
Close the executor.
|
static void |
Vertx.clusteredVertx(VertxOptions options,
Handler<AsyncResult<Vertx>> resultHandler)
Creates a clustered instance using the specified options.
|
void |
Vertx.deployVerticle(String name,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but DeploymentOptions are provided to configure the
deployment. |
void |
Vertx.deployVerticle(String name,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but the completionHandler will be notified when the deployment is complete. |
void |
Vertx.deployVerticle(java.util.function.Supplier<Verticle> verticleSupplier,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but Verticle instance is created by
invoking the verticleSupplier. |
void |
Vertx.deployVerticle(Verticle verticle,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but DeploymentOptions are provided to configure the
deployment. |
void |
Vertx.deployVerticle(Verticle verticle,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but the completionHandler will be notified when the deployment is complete. |
<T> void |
Context.executeBlocking(Callable<T> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
Vertx.executeBlocking(Callable<T> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
WorkerExecutor.executeBlocking(Callable<T> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
Context.executeBlocking(Callable<T> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
Vertx.executeBlocking(Callable<T> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
WorkerExecutor.executeBlocking(Callable<T> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
Context.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
Vertx.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
WorkerExecutor.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
Context.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
Vertx.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
WorkerExecutor.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
void |
TimeoutStream.pipeTo(WriteStream<Long> dst,
Handler<AsyncResult<Void>> handler)
Deprecated.
|
void |
Vertx.undeploy(String deploymentID,
Handler<AsyncResult<Void>> completionHandler)
Like
#undeploy(String) but the completionHandler will be notified when the undeployment is complete. |
| Modifier and Type | Method and Description |
|---|---|
DatagramSocket |
DatagramSocket.blockMulticastGroup(String multicastAddress,
String sourceToBlock,
Handler<AsyncResult<Void>> handler)
Block the given address for the given multicast address and notifies the once
the operation completes.
|
DatagramSocket |
DatagramSocket.blockMulticastGroup(String multicastAddress,
String networkInterface,
String sourceToBlock,
Handler<AsyncResult<Void>> handler)
Block the given address for the given multicast address on the given network interface and notifies
the once the operation completes.
|
void |
DatagramSocket.close(Handler<AsyncResult<Void>> handler)
Closes the
DatagramSocket implementation asynchronous
and notifies the handler once done. |
DatagramSocket |
DatagramSocket.listen(int port,
String host,
Handler<AsyncResult<DatagramSocket>> handler)
Start listening on the given port and host.
|
DatagramSocket |
DatagramSocket.listenMulticastGroup(String multicastAddress,
Handler<AsyncResult<Void>> handler)
Joins a multicast group and listens for packets send to it.
|
DatagramSocket |
DatagramSocket.listenMulticastGroup(String multicastAddress,
String networkInterface,
String source,
Handler<AsyncResult<Void>> handler)
Joins a multicast group and listens for packets send to it on the given network interface.
|
void |
DatagramSocket.pipeTo(WriteStream<DatagramPacket> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
DatagramSocket |
DatagramSocket.send(Buffer packet,
int port,
String host,
Handler<AsyncResult<Void>> handler)
Write the given
Buffer to the SocketAddress. |
DatagramSocket |
DatagramSocket.send(String str,
int port,
String host,
Handler<AsyncResult<Void>> handler)
Write the given
String to the SocketAddress using UTF8 encoding. |
DatagramSocket |
DatagramSocket.send(String str,
String enc,
int port,
String host,
Handler<AsyncResult<Void>> handler)
Write the given
String to the SocketAddress using the given encoding. |
DatagramSocket |
DatagramSocket.unlistenMulticastGroup(String multicastAddress,
Handler<AsyncResult<Void>> handler)
Leaves a multicast group and stops listening for packets send to it.
|
DatagramSocket |
DatagramSocket.unlistenMulticastGroup(String multicastAddress,
String networkInterface,
String source,
Handler<AsyncResult<Void>> handler)
Leaves a multicast group and stops listening for packets send to it on the given network interface.
|
| Modifier and Type | Method and Description |
|---|---|
void |
DnsClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
DnsClient |
DnsClient.lookup(String name,
Handler<AsyncResult<String>> handler)
Try to lookup the A (ipv4) or AAAA (ipv6) record for the given name.
|
DnsClient |
DnsClient.lookup4(String name,
Handler<AsyncResult<String>> handler)
Try to lookup the A (ipv4) record for the given name.
|
DnsClient |
DnsClient.lookup6(String name,
Handler<AsyncResult<String>> handler)
Try to lookup the AAAA (ipv6) record for the given name.
|
DnsClient |
DnsClient.resolveA(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve all A (ipv4) records for the given name.
|
DnsClient |
DnsClient.resolveAAAA(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve all AAAA (ipv6) records for the given name.
|
DnsClient |
DnsClient.resolveCNAME(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve the CNAME record for the given name.
|
DnsClient |
DnsClient.resolveMX(String name,
Handler<AsyncResult<List<MxRecord>>> handler)
Try to resolve the MX records for the given name.
|
DnsClient |
DnsClient.resolveNS(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve the NS records for the given name.
|
DnsClient |
DnsClient.resolvePTR(String name,
Handler<AsyncResult<String>> handler)
Try to resolve the PTR record for the given name.
|
DnsClient |
DnsClient.resolveSRV(String name,
Handler<AsyncResult<List<SrvRecord>>> handler)
Try to resolve the SRV records for the given name.
|
DnsClient |
DnsClient.resolveTXT(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve the TXT records for the given name.
|
DnsClient |
DnsClient.reverseLookup(String ipaddress,
Handler<AsyncResult<String>> handler)
Try to do a reverse lookup of an IP address.
|
| Modifier and Type | Method and Description |
|---|---|
void |
MessageProducer.close(Handler<AsyncResult<Void>> handler)
Same as
MessageProducer.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
MessageConsumer.completionHandler(Handler<AsyncResult<Void>> completionHandler)
Optional method which can be called to indicate when the registration has been propagated across the cluster.
|
void |
MessageConsumer.pipeTo(WriteStream<Message<T>> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
<R> void |
Message.replyAndRequest(Object message,
DeliveryOptions options,
Handler<AsyncResult<Message<R>>> replyHandler)
Like
Message.replyAndRequest(java.lang.Object, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.eventbus.Message<R>>>) but specifying options that can be used
to configure the delivery. |
<R> void |
Message.replyAndRequest(Object message,
Handler<AsyncResult<Message<R>>> replyHandler)
Reply to this message, specifying a
replyHandler for the reply - i.e. |
<T> EventBus |
EventBus.request(String address,
Object message,
DeliveryOptions options,
Handler<AsyncResult<Message<T>>> replyHandler)
Like
EventBus.request(java.lang.String, java.lang.Object, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.eventbus.Message<T>>>) but specifying options that can be used to configure the delivery. |
<T> EventBus |
EventBus.request(String address,
Object message,
Handler<AsyncResult<Message<T>>> replyHandler)
Sends a message and specify a
replyHandler that will be called if the recipient
subsequently replies to the message. |
void |
MessageConsumer.unregister(Handler<AsyncResult<Void>> completionHandler)
Unregisters the handler which created this registration
|
void |
MessageProducer.write(T body,
Handler<AsyncResult<Void>> handler)
Write a message to the event-bus, either sending or publishing.
|
| Modifier and Type | Method and Description |
|---|---|
FileSystem |
FileSystem.chmod(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Change the permissions on the file represented by
path to perms, asynchronously. |
FileSystem |
FileSystem.chmodRecursive(String path,
String perms,
String dirPerms,
Handler<AsyncResult<Void>> handler)
Change the permissions on the file represented by
path to perms, asynchronously. |
FileSystem |
FileSystem.chown(String path,
String user,
String group,
Handler<AsyncResult<Void>> handler)
Change the ownership on the file represented by
path to user and {code group}, asynchronously. |
void |
AsyncFile.close(Handler<AsyncResult<Void>> handler)
Close the file.
|
FileSystem |
FileSystem.copy(String from,
String to,
CopyOptions options,
Handler<AsyncResult<Void>> handler)
Copy a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.copy(String from,
String to,
Handler<AsyncResult<Void>> handler)
Copy a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.copyRecursive(String from,
String to,
boolean recursive,
Handler<AsyncResult<Void>> handler)
Copy a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.createFile(String path,
Handler<AsyncResult<Void>> handler)
Creates an empty file with the specified
path, asynchronously. |
FileSystem |
FileSystem.createFile(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Creates an empty file with the specified
path and permissions perms, asynchronously. |
FileSystem |
FileSystem.createTempDirectory(String prefix,
Handler<AsyncResult<String>> handler)
Creates a new directory in the default temporary-file directory, using the given
prefix to generate its name, asynchronously.
|
FileSystem |
FileSystem.createTempDirectory(String prefix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new directory in the default temporary-file directory, using the given
prefix to generate its name, asynchronously.
|
FileSystem |
FileSystem.createTempDirectory(String dir,
String prefix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new directory in the directory provided by the path
path, using the given
prefix to generate its name, asynchronously. |
FileSystem |
FileSystem.createTempFile(String prefix,
String suffix,
Handler<AsyncResult<String>> handler)
Creates a new file in the default temporary-file directory, using the given
prefix and suffix to generate its name, asynchronously.
|
FileSystem |
FileSystem.createTempFile(String prefix,
String suffix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new file in the directory provided by the path
dir, using the given
prefix and suffix to generate its name, asynchronously. |
FileSystem |
FileSystem.createTempFile(String dir,
String prefix,
String suffix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new file in the directory provided by the path
dir, using the given
prefix and suffix to generate its name, asynchronously. |
FileSystem |
FileSystem.delete(String path,
Handler<AsyncResult<Void>> handler)
Deletes the file represented by the specified
path, asynchronously. |
FileSystem |
FileSystem.deleteRecursive(String path,
boolean recursive,
Handler<AsyncResult<Void>> handler)
Deletes the file represented by the specified
path, asynchronously. |
void |
AsyncFile.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
AsyncFile.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
FileSystem |
FileSystem.exists(String path,
Handler<AsyncResult<Boolean>> handler)
Determines whether the file as specified by the path
path exists, asynchronously. |
AsyncFile |
AsyncFile.flush(Handler<AsyncResult<Void>> handler)
Same as
AsyncFile.flush(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but the handler will be called when the flush is complete or if an error occurs |
FileSystem |
FileSystem.fsProps(String path,
Handler<AsyncResult<FileSystemProps>> handler)
Returns properties of the file-system being used by the specified
path, asynchronously. |
void |
AsyncFileLock.isValid(Handler<AsyncResult<Boolean>> handler)
Like
AsyncFileLock.isValid(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but the handler will be called when the operation completes or if an error occurs. |
FileSystem |
FileSystem.link(String link,
String existing,
Handler<AsyncResult<Void>> handler)
Create a hard link on the file system from
link to existing, asynchronously. |
void |
AsyncFile.lock(Handler<AsyncResult<AsyncFileLock>> handler)
Like
AsyncFile.lock(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.file.AsyncFileLock>>) but the handler will be called when the operation is complete or if an error occurs. |
void |
AsyncFile.lock(long position,
long size,
boolean shared,
Handler<AsyncResult<AsyncFileLock>> handler)
Like
AsyncFile.lock(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.file.AsyncFileLock>>) but the handler will be called when the operation is complete or if an error occurs. |
FileSystem |
FileSystem.lprops(String path,
Handler<AsyncResult<FileProps>> handler)
Obtain properties for the link represented by
path, asynchronously. |
FileSystem |
FileSystem.mkdir(String path,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path, asynchronously. |
FileSystem |
FileSystem.mkdir(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path, asynchronously. |
FileSystem |
FileSystem.mkdirs(String path,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path and any non existent parents, asynchronously. |
FileSystem |
FileSystem.mkdirs(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path and any non existent parents, asynchronously. |
FileSystem |
FileSystem.move(String from,
String to,
CopyOptions options,
Handler<AsyncResult<Void>> handler)
Move a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.move(String from,
String to,
Handler<AsyncResult<Void>> handler)
Move a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.open(String path,
OpenOptions options,
Handler<AsyncResult<AsyncFile>> handler)
Open the file represented by
path, asynchronously. |
void |
AsyncFile.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
FileSystem |
FileSystem.props(String path,
Handler<AsyncResult<FileProps>> handler)
Obtain properties for the file represented by
path, asynchronously. |
AsyncFile |
AsyncFile.read(Buffer buffer,
int offset,
long position,
int length,
Handler<AsyncResult<Buffer>> handler)
Reads
length bytes of data from the file at position position in the file, asynchronously. |
FileSystem |
FileSystem.readDir(String path,
Handler<AsyncResult<List<String>>> handler)
Read the contents of the directory specified by
path, asynchronously. |
FileSystem |
FileSystem.readDir(String path,
String filter,
Handler<AsyncResult<List<String>>> handler)
Read the contents of the directory specified by
path, asynchronously. |
FileSystem |
FileSystem.readFile(String path,
Handler<AsyncResult<Buffer>> handler)
Reads the entire file as represented by the path
path as a , asynchronously. |
FileSystem |
FileSystem.readSymlink(String link,
Handler<AsyncResult<String>> handler)
Returns the path representing the file that the symbolic link specified by
link points to, asynchronously. |
void |
AsyncFileLock.release(Handler<AsyncResult<Void>> handler)
Like
AsyncFileLock.release(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but the handler will be called when the operation completes or if an error occurs. |
void |
AsyncFile.size(Handler<AsyncResult<Long>> handler)
Like
AsyncFile.size(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Long>>) but the handler will be called when the operation is complete or if an error occurs. |
FileSystem |
FileSystem.symlink(String link,
String existing,
Handler<AsyncResult<Void>> handler)
Create a symbolic link on the file system from
link to existing, asynchronously. |
FileSystem |
FileSystem.truncate(String path,
long len,
Handler<AsyncResult<Void>> handler)
Truncate the file represented by
path to length len in bytes, asynchronously. |
FileSystem |
FileSystem.unlink(String link,
Handler<AsyncResult<Void>> handler)
Unlinks the link on the file system represented by the path
link, asynchronously. |
void |
AsyncFile.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
AsyncFile.write(Buffer buffer,
long position,
Handler<AsyncResult<Void>> handler)
Write a
Buffer to the file at position position in the file, asynchronously. |
FileSystem |
FileSystem.writeFile(String path,
Buffer data,
Handler<AsyncResult<Void>> handler)
Creates the file, and writes the specified
Buffer data to the file represented by the path path,
asynchronously. |
| Modifier and Type | Method and Description |
|---|---|
HttpClientResponse |
HttpClientResponse.body(Handler<AsyncResult<Buffer>> handler)
Same as
HttpClientResponse.body(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.buffer.Buffer>>) but with an handler called when the operation completes |
HttpServerRequest |
HttpServerRequest.body(Handler<AsyncResult<Buffer>> handler)
Same as
HttpServerRequest.body(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.buffer.Buffer>>) but with an handler called when the operation completes |
void |
WebSocketClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
void |
ServerWebSocket.close(Handler<AsyncResult<Void>> handler)
Same as
ServerWebSocket.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServer.close(Handler<AsyncResult<Void>> completionHandler)
Like
HttpServer.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but supplying a handler that will be called when the server is actually closed (or has failed). |
void |
WebSocket.close(Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpConnection.close(Handler<AsyncResult<Void>> handler)
Close the connection and all the currently active streams.
|
void |
HttpClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
void |
ClientWebSocket.close(Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocketBase.close(Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ServerWebSocket.close(short statusCode,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocket.close(short statusCode,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ClientWebSocket.close(short statusCode,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocketBase.close(short statusCode,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ServerWebSocket.close(short statusCode,
String reason,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocket.close(short statusCode,
String reason,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ClientWebSocket.close(short statusCode,
String reason,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocketBase.close(short statusCode,
String reason,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.connect(Handler<AsyncResult<HttpClientResponse>> handler)
Create an HTTP tunnel to the server.
|
void |
WebSocketClient.connect(int port,
String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the specified port, host and relative request URI
|
void |
ClientWebSocket.connect(int port,
String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the specified port, host and relative request URI
|
void |
WebSocketClient.connect(String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the default client port, default client host and specified, relative request URI.
|
void |
ClientWebSocket.connect(String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect this WebSocket at the relative request URI using the default host and port.
|
void |
WebSocketClient.connect(String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the default client port and specified host and relative request URI.
|
void |
ClientWebSocket.connect(String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect this WebSocket to the host and relative request URI and default port.
|
void |
WebSocketClient.connect(WebSocketConnectOptions options,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket with the specified options.
|
void |
ClientWebSocket.connect(WebSocketConnectOptions options,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket with the specified options.
|
void |
HttpServerResponse.end(Buffer chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ServerWebSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
HttpClientRequest.end(Buffer chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
ClientWebSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
WebSocketBase.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
HttpClientResponse.end(Handler<AsyncResult<Void>> handler)
Same as
HttpClientResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServerResponse.end(Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ServerWebSocket.end(Handler<AsyncResult<Void>> handler)
|
void |
HttpClientRequest.end(Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocket.end(Handler<AsyncResult<Void>> handler)
|
void |
HttpServerRequest.end(Handler<AsyncResult<Void>> handler)
Same as
HttpServerRequest.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ClientWebSocket.end(Handler<AsyncResult<Void>> handler)
|
void |
WebSocketBase.end(Handler<AsyncResult<Void>> handler)
|
void |
HttpServerResponse.end(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.end(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServerResponse.end(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.end(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
HttpServer |
HttpServer.listen(Handler<AsyncResult<HttpServer>> listenHandler)
Like
HttpServer.listen(int, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.http.HttpServer>>) but supplying a handler that will be called when the server is actually listening (or has failed). |
HttpServer |
HttpServer.listen(int port,
Handler<AsyncResult<HttpServer>> listenHandler)
Like
HttpServer.listen(int, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.http.HttpServer>>) but supplying a handler that will be called when the server is actually listening (or has failed). |
HttpServer |
HttpServer.listen(int port,
String host,
Handler<AsyncResult<HttpServer>> listenHandler)
Like
HttpServer.listen(int, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.http.HttpServer>>) but supplying a handler that will be called when the server is actually
listening (or has failed). |
HttpServer |
HttpServer.listen(SocketAddress address,
Handler<AsyncResult<HttpServer>> listenHandler)
Tell the server to start listening on the given address supplying
a handler that will be called when the server is actually
listening (or has failed).
|
HttpConnection |
HttpConnection.ping(Buffer data,
Handler<AsyncResult<Buffer>> pongHandler)
Send a frame to the remote endpoint.
|
void |
HttpClientResponse.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
ServerWebSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
WebSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
HttpServerFileUpload.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
HttpServerRequest.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
ClientWebSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
WebSocketBase.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String path,
Handler<AsyncResult<HttpServerResponse>> handler)
Like
HttpServerResponse.push(io.vertx.core.http.HttpMethod, java.lang.String, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.http.HttpServerResponse>>) with the host copied from the current request. |
HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String path,
MultiMap headers,
Handler<AsyncResult<HttpServerResponse>> handler)
Like
HttpServerResponse.push(io.vertx.core.http.HttpMethod, java.lang.String, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.http.HttpServerResponse>>) with the host copied from the current request. |
HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String host,
String path,
Handler<AsyncResult<HttpServerResponse>> handler)
|
HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String host,
String path,
MultiMap headers,
Handler<AsyncResult<HttpServerResponse>> handler)
Push a response to the client.
The
handler will be notified with a success when the push can be sent and with
a failure when the client has disabled push or reset the push before it has been sent.
The handler may be queued if the client has reduced the maximum number of streams the server can push
concurrently.
Push can be sent only for peer initiated streams and if the response is not ended. |
void |
HttpClient.request(HttpMethod method,
int port,
String host,
String requestURI,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server at the
host and port. |
void |
HttpClient.request(HttpMethod method,
String requestURI,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server at the default host and port.
|
void |
HttpClient.request(HttpMethod method,
String host,
String requestURI,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server at the
host and default port. |
void |
HttpClient.request(RequestOptions options,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server.
|
HttpClientRequest |
HttpClientRequest.response(Handler<AsyncResult<HttpClientResponse>> handler)
Set a callback for the associated
HttpClientResponse. |
void |
HttpClientRequest.send(Buffer body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a buffer
body. |
void |
HttpServerResponse.send(Buffer body,
Handler<AsyncResult<Void>> handler)
Send the request with a buffer
body. |
void |
HttpClientRequest.send(Flowable<Buffer> body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a stream
body. |
void |
HttpServerResponse.send(Flowable<Buffer> body,
Handler<AsyncResult<Void>> handler)
Send the request with a stream
body. |
void |
HttpClientRequest.send(Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with an empty body.
|
void |
HttpServerResponse.send(Handler<AsyncResult<Void>> handler)
Send the request with an empty body.
|
void |
HttpClientRequest.send(ReadStream<Buffer> body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a stream
body. |
void |
HttpServerResponse.send(ReadStream<Buffer> body,
Handler<AsyncResult<Void>> handler)
Send the request with a stream
body. |
void |
HttpClientRequest.send(String body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a string
body. |
void |
HttpServerResponse.send(String body,
Handler<AsyncResult<Void>> handler)
Send the request with a string
body. |
HttpServerResponse |
HttpServerResponse.sendFile(String filename,
Handler<AsyncResult<Void>> resultHandler)
Like
HttpServerResponse.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but providing a handler which will be notified once the file has been completely
written to the wire. |
HttpServerResponse |
HttpServerResponse.sendFile(String filename,
long offset,
Handler<AsyncResult<Void>> resultHandler)
Like
HttpServerResponse.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but providing a handler which will be notified once the file has been completely
written to the wire. |
HttpServerResponse |
HttpServerResponse.sendFile(String filename,
long offset,
long length,
Handler<AsyncResult<Void>> resultHandler)
Like
HttpServerResponse.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but providing a handler which will be notified once the file has been
completely written to the wire. |
HttpClientRequest |
HttpClientRequest.sendHead(Handler<AsyncResult<Void>> completionHandler)
Like
HttpClientRequest.sendHead(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler after headers have been sent. |
void |
ServerWebSocket.setHandshake(Future<Integer> future,
Handler<AsyncResult<Integer>> handler)
Deprecated.
|
void |
ServerWebSocket.setHandshake(Single<Integer> future,
Handler<AsyncResult<Integer>> handler)
Deprecated.
|
void |
HttpConnection.shutdown(Handler<AsyncResult<Void>> handler)
Shutdown a 30 seconds timeout (
shutdown(30, TimeUnit.SECONDS)). |
void |
HttpConnection.shutdown(long timeout,
Handler<AsyncResult<Void>> handler)
Deprecated.
|
void |
HttpConnection.shutdown(long timeout,
TimeUnit unit,
Handler<AsyncResult<Void>> handler)
Initiate a graceful connection shutdown, the connection is taken out of service and closed when all the inflight requests
are processed, otherwise after a
timeout the connection will be closed. |
void |
HttpServerFileUpload.streamToFileSystem(String filename,
Handler<AsyncResult<Void>> handler)
Stream the content of this upload to the given file on storage.
|
void |
HttpServerRequest.toNetSocket(Handler<AsyncResult<NetSocket>> handler)
Establish a TCP tunnel with the client.
|
void |
HttpServerRequest.toWebSocket(Handler<AsyncResult<ServerWebSocket>> handler)
Upgrade the connection of the current request to a WebSocket.
|
HttpConnection |
HttpConnection.updateSettings(Http2Settings settings,
Handler<AsyncResult<Void>> completionHandler)
Send to the remote endpoint an update of this endpoint settings
The
completionHandler will be notified when the remote endpoint has acknowledged the settings. |
void |
WebSocketClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
WebSocketClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpServer.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
HttpServer.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
HttpClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
WebSocketClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
WebSocketClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpServer.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
HttpServer.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
HttpClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpClient.webSocket(int port,
String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocket(String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocket(String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocket(WebSocketConnectOptions options,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocketAbs(String url,
MultiMap headers,
WebsocketVersion version,
List<String> subProtocols,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpServerResponse.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
ServerWebSocket.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
HttpClientRequest.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
WebSocket.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
ClientWebSocket.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
WebSocketBase.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
HttpServerResponse.write(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.write(io.vertx.reactivex.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.write(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.write(io.vertx.reactivex.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServerResponse.write(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.write(io.vertx.reactivex.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.write(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.write(io.vertx.reactivex.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeBinaryMessage(io.vertx.reactivex.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServerResponse.writeEarlyHints(MultiMap headers,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.writeEarlyHints(io.vertx.reactivex.core.MultiMap, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeFinalBinaryFrame(io.vertx.reactivex.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeFinalTextFrame(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeFrame(io.vertx.reactivex.core.http.WebSocketFrame, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writePing(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writePing(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writePing(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writePing(Buffer data,
Handler<AsyncResult<Void>> handler)
Writes a ping frame to the connection.
|
ServerWebSocket |
ServerWebSocket.writePong(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writePong(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writePong(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writePong(Buffer data,
Handler<AsyncResult<Void>> handler)
Writes a pong frame to the connection.
|
ServerWebSocket |
ServerWebSocket.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeTextMessage(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
NetClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
void |
NetSocket.close(Handler<AsyncResult<Void>> handler)
Close the NetSocket and notify the
handler when the operation completes. |
void |
NetServer.close(Handler<AsyncResult<Void>> completionHandler)
Like
NetServer.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but supplying a handler that will be notified when close is complete. |
NetClient |
NetClient.connect(int port,
String host,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
port and host. |
NetClient |
NetClient.connect(int port,
String host,
String serverName,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
port and host. |
NetClient |
NetClient.connect(SocketAddress remoteAddress,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
remoteAddress. |
NetClient |
NetClient.connect(SocketAddress remoteAddress,
String serverName,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
remoteAddress. |
void |
NetSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
NetSocket.end(Handler<AsyncResult<Void>> handler)
|
NetServer |
NetServer.listen(Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.net.NetServer>>) but providing a handler that will be notified when the server is listening, or fails. |
NetServer |
NetServer.listen(int port,
Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.net.NetServer>>) but providing a handler that will be notified when the server is listening, or fails. |
NetServer |
NetServer.listen(int port,
String host,
Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.net.NetServer>>) but providing a handler that will be notified when the server is listening, or fails. |
NetServer |
NetServer.listen(SocketAddress localAddress,
Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.core.net.NetServer>>) but providing a handler that will be notified when the server is listening, or fails. |
void |
NetSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
NetSocket |
NetSocket.sendFile(String filename,
Handler<AsyncResult<Void>> resultHandler)
Same as
NetSocket.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but also takes a handler that will be called when the send has completed or
a failure has occurred |
NetSocket |
NetSocket.sendFile(String filename,
long offset,
Handler<AsyncResult<Void>> resultHandler)
Same as
NetSocket.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but also takes a handler that will be called when the send has completed or
a failure has occurred |
NetSocket |
NetSocket.sendFile(String filename,
long offset,
long length,
Handler<AsyncResult<Void>> resultHandler)
Same as
NetSocket.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but also takes a handler that will be called when the send has completed or
a failure has occurred |
void |
NetClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
NetClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
NetServer.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
NetServer.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
NetClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
NetClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
NetServer.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
NetServer.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
NetSocket |
NetSocket.upgradeToSsl(Handler<AsyncResult<Void>> handler)
Upgrade channel to use SSL/TLS.
|
NetSocket |
NetSocket.upgradeToSsl(String serverName,
Handler<AsyncResult<Void>> handler)
Upgrade channel to use SSL/TLS.
|
void |
NetSocket.write(Buffer message,
Handler<AsyncResult<Void>> handler)
Like
WriteStream.write(T, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the message has been written
or failed to be written. |
void |
NetSocket.write(String str,
Handler<AsyncResult<Void>> handler)
Same as
NetSocket.write(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
NetSocket.write(String str,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
NetSocket.write(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
RecordParser.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
JsonParser.pipeTo(WriteStream<JsonEvent> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
| Modifier and Type | Method and Description |
|---|---|
void |
Counter.addAndGet(long value,
Handler<AsyncResult<Long>> resultHandler)
Add the value to the counter atomically and return the new count
|
void |
AsyncMap.clear(Handler<AsyncResult<Void>> resultHandler)
Clear all entries in the map
|
void |
Counter.compareAndSet(long expected,
long value,
Handler<AsyncResult<Boolean>> resultHandler)
Set the counter to the specified value only if the current value is the expectec value.
|
void |
Counter.decrementAndGet(Handler<AsyncResult<Long>> resultHandler)
Decrement the counter atomically and return the new count
|
void |
Counter.get(Handler<AsyncResult<Long>> resultHandler)
Get the current value of the counter
|
void |
AsyncMap.get(K k,
Handler<AsyncResult<V>> resultHandler)
Get a value from the map, asynchronously.
|
void |
Counter.getAndAdd(long value,
Handler<AsyncResult<Long>> resultHandler)
Add the value to the counter atomically and return the value before the add
|
void |
Counter.getAndIncrement(Handler<AsyncResult<Long>> resultHandler)
Increment the counter atomically and return the value before the increment.
|
<K,V> void |
SharedData.getAsyncMap(String name,
Handler<AsyncResult<AsyncMap<K,V>>> resultHandler)
Get the
AsyncMap with the specified name. |
<K,V> void |
SharedData.getClusterWideMap(String name,
Handler<AsyncResult<AsyncMap<K,V>>> resultHandler)
Get the cluster wide map with the specified name.
|
void |
SharedData.getCounter(String name,
Handler<AsyncResult<Counter>> resultHandler)
Get an asynchronous counter.
|
<K,V> void |
SharedData.getLocalAsyncMap(String name,
Handler<AsyncResult<AsyncMap<K,V>>> resultHandler)
Get the
AsyncMap with the specified name. |
void |
SharedData.getLocalCounter(String name,
Handler<AsyncResult<Counter>> resultHandler)
Get an asynchronous local counter.
|
void |
SharedData.getLocalLock(String name,
Handler<AsyncResult<Lock>> resultHandler)
Get an asynchronous local lock with the specified name.
|
void |
SharedData.getLocalLockWithTimeout(String name,
long timeout,
Handler<AsyncResult<Lock>> resultHandler)
|
void |
SharedData.getLock(String name,
Handler<AsyncResult<Lock>> resultHandler)
Get an asynchronous lock with the specified name.
|
void |
SharedData.getLockWithTimeout(String name,
long timeout,
Handler<AsyncResult<Lock>> resultHandler)
|
void |
Counter.incrementAndGet(Handler<AsyncResult<Long>> resultHandler)
Increment the counter atomically and return the new count
|
void |
AsyncMap.keys(Handler<AsyncResult<Set<K>>> resultHandler)
Get the keys of the map, asynchronously.
|
void |
AsyncMap.put(K k,
V v,
Handler<AsyncResult<Void>> completionHandler)
Put a value in the map, asynchronously.
|
void |
AsyncMap.put(K k,
V v,
long ttl,
Handler<AsyncResult<Void>> completionHandler)
Like
AsyncMap.put(K, V, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but specifying a time to live for the entry. |
void |
AsyncMap.putIfAbsent(K k,
V v,
Handler<AsyncResult<V>> completionHandler)
Put the entry only if there is no entry with the key already present.
|
void |
AsyncMap.putIfAbsent(K k,
V v,
long ttl,
Handler<AsyncResult<V>> completionHandler)
Link
AsyncMap.putIfAbsent(K, V, io.vertx.core.Handler<io.vertx.core.AsyncResult<V>>) but specifying a time to live for the entry. |
void |
AsyncMap.remove(K k,
Handler<AsyncResult<V>> resultHandler)
Remove a value from the map, asynchronously.
|
void |
AsyncMap.removeIfPresent(K k,
V v,
Handler<AsyncResult<Boolean>> resultHandler)
Remove a value from the map, only if entry already exists with same value.
|
void |
AsyncMap.replace(K k,
V v,
Handler<AsyncResult<V>> resultHandler)
Replace the entry only if it is currently mapped to some value
|
void |
AsyncMap.replace(K k,
V v,
long ttl,
Handler<AsyncResult<V>> resultHandler)
Replace the entry only if it is currently mapped to some value
|
void |
AsyncMap.replaceIfPresent(K k,
V oldValue,
V newValue,
Handler<AsyncResult<Boolean>> resultHandler)
Replace the entry only if it is currently mapped to a specific value
|
void |
AsyncMap.replaceIfPresent(K k,
V oldValue,
V newValue,
long ttl,
Handler<AsyncResult<Boolean>> resultHandler)
Replace the entry only if it is currently mapped to a specific value
|
void |
AsyncMap.size(Handler<AsyncResult<Integer>> resultHandler)
Provide the number of entries in the map
|
void |
AsyncMap.values(Handler<AsyncResult<List<V>>> resultHandler)
Get the values of the map, asynchronously.
|
| Modifier and Type | Method and Description |
|---|---|
void |
WriteStream.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WriteStream.end(T data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
ReadStream.pipeTo(WriteStream<T> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
Pipe.to(WriteStream<T> dst,
Handler<AsyncResult<Void>> completionHandler)
Start to pipe the elements to the destination
WriteStream. |
void |
WriteStream.write(T data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
static void |
DB2Connection.connect(Vertx vertx,
DB2ConnectOptions connectOptions,
Handler<AsyncResult<DB2Connection>> handler)
Create a connection to DB2 server with the given
connectOptions. |
static void |
DB2Connection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<DB2Connection>> handler)
|
DB2Connection |
DB2Connection.debug(Handler<AsyncResult<Void>> handler)
Send a DEBUG command to dump debug information to the server's stdout.
|
DB2Connection |
DB2Connection.ping(Handler<AsyncResult<Void>> handler)
Send a PING command to check if the server is alive.
|
DB2Connection |
DB2Connection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler) |
| Modifier and Type | Method and Description |
|---|---|
User |
User.isAuthorized(Authorization authority,
Handler<AsyncResult<Boolean>> resultHandler)
Deprecated.
|
User |
User.isAuthorized(String authority,
Handler<AsyncResult<Boolean>> resultHandler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
void |
AuthenticationProvider.authenticate(Credentials credentials,
Handler<AsyncResult<User>> resultHandler)
Authenticate a user.
|
void |
AuthenticationProvider.authenticate(JsonObject credentials,
Handler<AsyncResult<User>> resultHandler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
void |
AuthorizationProvider.getAuthorizations(User user,
Handler<AsyncResult<Void>> handler)
Updates the user with the set of authorizations.
|
| Modifier and Type | Method and Description |
|---|---|
JDBCUserUtil |
JDBCUserUtil.createHashedUser(String username,
String hash,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
JDBCUserUtil |
JDBCUserUtil.createRolePermission(String role,
String permission,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
JDBCUserUtil |
JDBCUserUtil.createUser(String username,
String password,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
JDBCUserUtil |
JDBCUserUtil.createUserRole(String username,
String role,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
MongoUserUtil |
MongoUserUtil.createHashedUser(String username,
String hash,
Handler<AsyncResult<String>> resultHandler)
Insert a user into a database.
|
MongoUserUtil |
MongoUserUtil.createUser(String username,
String password,
Handler<AsyncResult<String>> resultHandler)
Insert a user into a database.
|
MongoUserUtil |
MongoUserUtil.createUserRolesAndPermissions(String username,
List<String> roles,
List<String> permissions,
Handler<AsyncResult<String>> resultHandler)
Insert a user role into a database.
|
void |
MongoAuth.insertUser(String username,
String password,
List<String> roles,
List<String> permissions,
Handler<AsyncResult<String>> resultHandler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
OAuth2Auth |
OAuth2Auth.jWKSet(Handler<AsyncResult<Void>> handler)
Retrieve the public server JSON Web Key (JWK) required to verify the authenticity
of issued ID and access tokens.
|
OAuth2Auth |
OAuth2Auth.refresh(User user,
Handler<AsyncResult<User>> handler)
Refresh the current User (access token).
|
OAuth2Auth |
OAuth2Auth.revoke(User user,
Handler<AsyncResult<Void>> handler)
Revoke an obtained access token.
|
OAuth2Auth |
OAuth2Auth.revoke(User user,
String tokenType,
Handler<AsyncResult<Void>> handler)
Revoke an obtained access or refresh token.
|
OAuth2Auth |
OAuth2Auth.userInfo(User user,
Handler<AsyncResult<JsonObject>> handler)
Retrieve profile information and other attributes for a logged-in end-user.
|
| Modifier and Type | Method and Description |
|---|---|
static void |
SalesforceAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
IBMCloudAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
GoogleAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
AzureADAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
OpenIDConnectAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
KeycloakAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
AmazonCognitoAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
| Modifier and Type | Method and Description |
|---|---|
SqlUserUtil |
SqlUserUtil.createHashedUser(String username,
String hash,
Handler<AsyncResult<Void>> resultHandler)
Insert a user into a database.
|
SqlUserUtil |
SqlUserUtil.createRolePermission(String role,
String permission,
Handler<AsyncResult<Void>> resultHandler)
Insert a role permission into a database.
|
SqlUserUtil |
SqlUserUtil.createUser(String username,
String password,
Handler<AsyncResult<Void>> resultHandler)
Insert a user into a database.
|
SqlUserUtil |
SqlUserUtil.createUserRole(String username,
String role,
Handler<AsyncResult<Void>> resultHandler)
Insert a user role into a database.
|
| Modifier and Type | Method and Description |
|---|---|
WebAuthn |
WebAuthn.createCredentialsOptions(JsonObject user,
Handler<AsyncResult<JsonObject>> handler)
Gets a challenge and any other parameters for the
navigator.credentials.create() call. |
MetaDataService |
MetaDataService.fetchTOC(Handler<AsyncResult<Boolean>> handler)
Fetches the FIDO2 MDS3 TOC and process the entries to the metadata store.
|
MetaDataService |
MetaDataService.fetchTOC(String url,
Handler<AsyncResult<Boolean>> handler)
Fetches the FIDO2 TOC for the given URL and process the entries to the metadata store.
|
WebAuthn |
WebAuthn.getCredentialsOptions(String name,
Handler<AsyncResult<JsonObject>> handler)
Creates an assertion challenge and any other parameters for the
navigator.credentials.get() call. |
| Modifier and Type | Method and Description |
|---|---|
ConsulClient |
ConsulClient.agentInfo(Handler<AsyncResult<JsonObject>> resultHandler)
Returns the configuration and member information of the local agent
|
ConsulClient |
ConsulClient.catalogDatacenters(Handler<AsyncResult<List<String>>> resultHandler)
Return all the datacenters that are known by the Consul server
|
ConsulClient |
ConsulClient.catalogNodes(Handler<AsyncResult<NodeList>> resultHandler)
Returns the nodes registered in a datacenter
|
ConsulClient |
ConsulClient.catalogNodeServices(String node,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the node's registered services
|
ConsulClient |
ConsulClient.catalogNodeServicesWithOptions(String node,
BlockingQueryOptions options,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the node's registered services
This is blocking query unlike
ConsulClient.catalogNodeServices(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.ServiceList>>) |
ConsulClient |
ConsulClient.catalogNodesWithOptions(NodeQueryOptions options,
Handler<AsyncResult<NodeList>> resultHandler)
Returns the nodes registered in a datacenter
|
ConsulClient |
ConsulClient.catalogServiceNodes(String service,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the nodes providing a service
|
ConsulClient |
ConsulClient.catalogServiceNodesWithOptions(String service,
ServiceQueryOptions options,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the nodes providing a service
|
ConsulClient |
ConsulClient.catalogServices(Handler<AsyncResult<ServiceList>> resultHandler)
Returns the services registered in a datacenter
|
ConsulClient |
ConsulClient.catalogServicesWithOptions(BlockingQueryOptions options,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the services registered in a datacenter
This is blocking query unlike
ConsulClient.catalogServices(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.ServiceList>>) |
ConsulClient |
ConsulClient.cloneAclToken(String accessorId,
CloneAclTokenOptions cloneAclToken,
Handler<AsyncResult<AclToken>> resultHandler)
Clones an existing ACL token
|
ConsulClient |
ConsulClient.cloneAclToken(String id,
Handler<AsyncResult<String>> idHandler)
Deprecated.
|
ConsulClient |
ConsulClient.coordinateDatacenters(Handler<AsyncResult<List<DcCoordinates>>> resultHandler)
Returns the WAN network coordinates for all Consul servers, organized by DCs
|
ConsulClient |
ConsulClient.coordinateNodes(Handler<AsyncResult<CoordinateList>> resultHandler)
Returns the LAN network coordinates for all nodes in a given DC
|
ConsulClient |
ConsulClient.coordinateNodesWithOptions(BlockingQueryOptions options,
Handler<AsyncResult<CoordinateList>> resultHandler)
Returns the LAN network coordinates for all nodes in a given DC
This is blocking query unlike
ConsulClient.coordinateNodes(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.CoordinateList>>) |
ConsulClient |
ConsulClient.createAclPolicy(AclPolicy policy,
Handler<AsyncResult<String>> resultHandler)
Creates a new ACL policy
|
ConsulClient |
ConsulClient.createAclToken(AclToken token,
Handler<AsyncResult<AclToken>> resultHandler)
Create an Acl token
|
ConsulClient |
ConsulClient.createAclToken(AclToken token,
Handler<AsyncResult<String>> idHandler)
Deprecated.
|
ConsulClient |
ConsulClient.createPreparedQuery(PreparedQueryDefinition definition,
Handler<AsyncResult<String>> resultHandler) |
ConsulClient |
ConsulClient.createSession(Handler<AsyncResult<String>> idHandler)
Initialize a new session
|
ConsulClient |
ConsulClient.createSessionWithOptions(SessionOptions options,
Handler<AsyncResult<String>> idHandler)
Initialize a new session
|
ConsulClient |
ConsulClient.deleteAclToken(String accessorId,
Handler<AsyncResult<Boolean>> resultHandler)
Deletes an ACL token
|
ConsulClient |
ConsulClient.deletePolicy(String id,
Handler<AsyncResult<Boolean>> resultHandler)
This endpoint deletes an ACL policy
|
ConsulClient |
ConsulClient.deletePreparedQuery(String id,
Handler<AsyncResult<Void>> resultHandler)
Deletes an existing prepared query
|
ConsulClient |
ConsulClient.deleteValue(String key,
Handler<AsyncResult<Void>> resultHandler)
Remove the key/value pair that corresponding to the specified key
|
ConsulClient |
ConsulClient.deleteValues(String keyPrefix,
Handler<AsyncResult<Void>> resultHandler)
Removes all the key/value pair that corresponding to the specified key prefix
|
ConsulClient |
ConsulClient.deregisterCatalogService(String nodeId,
String serviceId,
Handler<AsyncResult<Void>> resultHandler)
Deregister entities from the node or deregister the node itself.
|
ConsulClient |
ConsulClient.deregisterCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Remove a check from the local agent.
|
ConsulClient |
ConsulClient.deregisterService(String id,
Handler<AsyncResult<Void>> resultHandler)
Remove a service from the local agent.
|
ConsulClient |
ConsulClient.destroyAclToken(String id,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
ConsulClient |
ConsulClient.destroySession(String id,
Handler<AsyncResult<Void>> resultHandler)
Destroys the given session
|
ConsulClient |
ConsulClient.executePreparedQuery(String query,
Handler<AsyncResult<PreparedQueryExecuteResponse>> resultHandler)
Executes an existing prepared query.
|
ConsulClient |
ConsulClient.executePreparedQueryWithOptions(String query,
PreparedQueryExecuteOptions options,
Handler<AsyncResult<PreparedQueryExecuteResponse>> resultHandler)
Executes an existing prepared query.
|
ConsulClient |
ConsulClient.failCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "critical".
|
ConsulClient |
ConsulClient.failCheckWithNote(String checkId,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "critical".
|
ConsulClient |
ConsulClient.fireEvent(String name,
Handler<AsyncResult<Event>> resultHandler)
Fires a new user event
|
ConsulClient |
ConsulClient.fireEventWithOptions(String name,
EventOptions options,
Handler<AsyncResult<Event>> resultHandler)
Fires a new user event
|
ConsulClient |
ConsulClient.getAclPolicies(Handler<AsyncResult<List<AclPolicy>>> resultHandler)
This endpoint lists all the ACL policies.
|
ConsulClient |
ConsulClient.getAclTokens(Handler<AsyncResult<List<AclToken>>> resultHandler)
Get list of Acl token
|
ConsulClient |
ConsulClient.getAllPreparedQueries(Handler<AsyncResult<List<PreparedQueryDefinition>>> resultHandler)
Returns a list of all prepared queries.
|
ConsulClient |
ConsulClient.getKeys(String keyPrefix,
Handler<AsyncResult<List<String>>> resultHandler)
Returns the list of keys that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getKeysWithOptions(String keyPrefix,
BlockingQueryOptions options,
Handler<AsyncResult<List<String>>> resultHandler)
Returns the list of keys that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getPreparedQuery(String id,
Handler<AsyncResult<PreparedQueryDefinition>> resultHandler)
Returns an existing prepared query
|
ConsulClient |
ConsulClient.getValue(String key,
Handler<AsyncResult<KeyValue>> resultHandler)
Returns key/value pair that corresponding to the specified key.
|
ConsulClient |
ConsulClient.getValues(String keyPrefix,
Handler<AsyncResult<KeyValueList>> resultHandler)
Returns the list of key/value pairs that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getValuesWithOptions(String keyPrefix,
BlockingQueryOptions options,
Handler<AsyncResult<KeyValueList>> resultHandler)
Returns the list of key/value pairs that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getValueWithOptions(String key,
BlockingQueryOptions options,
Handler<AsyncResult<KeyValue>> resultHandler)
Returns key/value pair that corresponding to the specified key.
|
ConsulClient |
ConsulClient.healthChecks(String service,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks associated with the service
|
ConsulClient |
ConsulClient.healthChecksWithOptions(String service,
CheckQueryOptions options,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks associated with the service
|
ConsulClient |
ConsulClient.healthNodesWithOptions(String node,
CheckQueryOptions options,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks specific to the node provided on the path.
|
ConsulClient |
ConsulClient.healthServiceNodes(String service,
boolean passing,
Handler<AsyncResult<ServiceEntryList>> resultHandler)
Returns the nodes providing the service.
|
ConsulClient |
ConsulClient.healthServiceNodesWithOptions(String service,
boolean passing,
ServiceQueryOptions options,
Handler<AsyncResult<ServiceEntryList>> resultHandler)
Returns the nodes providing the service.
|
ConsulClient |
ConsulClient.healthState(HealthState healthState,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks in the specified status
|
ConsulClient |
ConsulClient.healthStateWithOptions(HealthState healthState,
CheckQueryOptions options,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks in the specified status
|
ConsulClient |
ConsulClient.infoAclToken(String id,
Handler<AsyncResult<AclToken>> tokenHandler)
Deprecated.
|
ConsulClient |
ConsulClient.infoSession(String id,
Handler<AsyncResult<Session>> resultHandler)
Returns the requested session information
|
ConsulClient |
ConsulClient.infoSessionWithOptions(String id,
BlockingQueryOptions options,
Handler<AsyncResult<Session>> resultHandler)
Returns the requested session information
This is blocking query unlike
ConsulClient.infoSession(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.Session>>) |
ConsulClient |
ConsulClient.leaderStatus(Handler<AsyncResult<String>> resultHandler)
Get the Raft leader for the datacenter in which the agent is running.
|
ConsulClient |
ConsulClient.listAclTokens(Handler<AsyncResult<List<AclToken>>> resultHandler)
Deprecated.
|
ConsulClient |
ConsulClient.listEvents(Handler<AsyncResult<EventList>> resultHandler)
Returns the most recent events known by the agent
|
ConsulClient |
ConsulClient.listEventsWithOptions(EventListOptions options,
Handler<AsyncResult<EventList>> resultHandler)
Returns the most recent events known by the agent.
|
ConsulClient |
ConsulClient.listNodeSessions(String nodeId,
Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions for a given node
|
ConsulClient |
ConsulClient.listNodeSessionsWithOptions(String nodeId,
BlockingQueryOptions options,
Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions for a given node
This is blocking query unlike
ConsulClient.listNodeSessions(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.SessionList>>) |
ConsulClient |
ConsulClient.listSessions(Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions
|
ConsulClient |
ConsulClient.listSessionsWithOptions(BlockingQueryOptions options,
Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions
This is blocking query unlike
ConsulClient.listSessions(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.SessionList>>) |
ConsulClient |
ConsulClient.localChecks(Handler<AsyncResult<List<Check>>> resultHandler)
Return all the checks that are registered with the local agent.
|
ConsulClient |
ConsulClient.localServices(Handler<AsyncResult<List<Service>>> resultHandler)
Returns list of services registered with the local agent.
|
ConsulClient |
ConsulClient.maintenanceService(MaintenanceOptions maintenanceOptions,
Handler<AsyncResult<Void>> resultHandler)
Places a given service into "maintenance mode"
|
ConsulClient |
ConsulClient.passCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "passing".
|
ConsulClient |
ConsulClient.passCheckWithNote(String checkId,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "passing".
|
ConsulClient |
ConsulClient.peersStatus(Handler<AsyncResult<List<String>>> resultHandler)
Retrieves the Raft peers for the datacenter in which the the agent is running.
|
ConsulClient |
ConsulClient.putValue(String key,
String value,
Handler<AsyncResult<Boolean>> resultHandler)
Adds specified key/value pair
|
ConsulClient |
ConsulClient.putValueWithOptions(String key,
String value,
KeyValueOptions options,
Handler<AsyncResult<Boolean>> resultHandler) |
ConsulClient |
ConsulClient.readAclToken(String accessorId,
Handler<AsyncResult<AclToken>> resultHandler)
Reads an ACL token with the given Accessor ID
|
ConsulClient |
ConsulClient.readPolicy(String id,
Handler<AsyncResult<AclPolicy>> resultHandler)
This endpoint reads an ACL policy with the given ID
|
ConsulClient |
ConsulClient.readPolicyByName(String name,
Handler<AsyncResult<AclPolicy>> resultHandler)
This endpoint reads an ACL policy with the given name
|
ConsulClient |
ConsulClient.registerCatalogService(Node nodeOptions,
ServiceOptions serviceOptions,
Handler<AsyncResult<Void>> resultHandler)
Register node with external service
|
ConsulClient |
ConsulClient.registerCheck(CheckOptions checkOptions,
Handler<AsyncResult<Void>> resultHandler)
Add a new check to the local agent.
|
ConsulClient |
ConsulClient.registerService(ServiceOptions serviceOptions,
Handler<AsyncResult<Void>> resultHandler)
Adds a new service, with an optional health check, to the local agent.
|
ConsulClient |
ConsulClient.renewSession(String id,
Handler<AsyncResult<Session>> resultHandler)
Renews the given session.
|
ConsulClient |
ConsulClient.transaction(TxnRequest request,
Handler<AsyncResult<TxnResponse>> resultHandler)
Manages multiple operations inside a single, atomic transaction.
|
ConsulClient |
ConsulClient.updateAclToken(AclToken token,
Handler<AsyncResult<String>> idHandler)
Deprecated.
|
ConsulClient |
ConsulClient.updateAclToken(String accessorId,
AclToken token,
Handler<AsyncResult<AclToken>> resultHandler)
Update an existing Acl token
|
ConsulClient |
ConsulClient.updateCheck(String checkId,
CheckStatus status,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to given status.
|
ConsulClient |
ConsulClient.updateCheckWithNote(String checkId,
CheckStatus status,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to given status.
|
ConsulClient |
ConsulClient.updatePolicy(String id,
AclPolicy policy,
Handler<AsyncResult<AclPolicy>> resultHandler)
This endpoint updates an existing ACL policy
|
ConsulClient |
ConsulClient.updatePreparedQuery(PreparedQueryDefinition definition,
Handler<AsyncResult<Void>> resultHandler) |
ConsulClient |
ConsulClient.warnCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "warning".
|
ConsulClient |
ConsulClient.warnCheckWithNote(String checkId,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "warning".
|
| Modifier and Type | Method and Description |
|---|---|
void |
TcpEventBusBridge.close(Handler<AsyncResult<Void>> handler)
Close the current socket.
|
TcpEventBusBridge |
TcpEventBusBridge.listen(Handler<AsyncResult<TcpEventBusBridge>> handler)
Listen on default port 7000 with a handler to report the state of the socket listen operation.
|
TcpEventBusBridge |
TcpEventBusBridge.listen(int port,
Handler<AsyncResult<TcpEventBusBridge>> handler)
Listen on specific port
|
TcpEventBusBridge |
TcpEventBusBridge.listen(int port,
String address,
Handler<AsyncResult<TcpEventBusBridge>> handler)
Listen on specific port and bind to specific address
|
| Modifier and Type | Method and Description |
|---|---|
void |
HealthChecks.checkStatus(Handler<AsyncResult<CheckResult>> resultHandler)
Invokes the registered procedures.
|
void |
HealthChecks.checkStatus(String name,
Handler<AsyncResult<CheckResult>> resultHandler)
Invokes the registered procedure with the given name and sub-procedures.
|
HealthChecks |
HealthChecks.invoke(String name,
Handler<AsyncResult<JsonObject>> resultHandler)
Invokes the registered procedure with the given name and sub-procedures.
|
| Modifier and Type | Method and Description |
|---|---|
SQLOperations |
JDBCClient.querySingle(String sql,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement that returns a single SQL row.
|
SQLOperations |
JDBCClient.querySingleWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement with arguments that returns a single SQL row.
|
| Modifier and Type | Method and Description |
|---|---|
void |
MailClient.close(Handler<AsyncResult<Void>> closedHandler)
Close the MailClient
|
MailClient |
MailClient.sendMail(MailMessage email,
Handler<AsyncResult<MailResult>> resultHandler)
send a single mail via MailClient
|
| Modifier and Type | Method and Description |
|---|---|
MongoClient |
MongoClient.bulkWrite(String collection,
List<BulkOperation> operations,
Handler<AsyncResult<MongoClientBulkWriteResult>> resultHandler)
Execute a bulk operation.
|
MongoClient |
MongoClient.bulkWriteWithOptions(String collection,
List<BulkOperation> operations,
BulkWriteOptions bulkWriteOptions,
Handler<AsyncResult<MongoClientBulkWriteResult>> resultHandler)
Execute a bulk operation with the specified write options.
|
void |
MongoClient.close(Handler<AsyncResult<Void>> handler)
Close the client and release its resources
|
MongoClient |
MongoClient.count(String collection,
JsonObject query,
Handler<AsyncResult<Long>> resultHandler)
Count matching documents in a collection.
|
MongoClient |
MongoClient.countWithOptions(String collection,
JsonObject query,
CountOptions countOptions,
Handler<AsyncResult<Long>> resultHandler)
Count matching documents in a collection.
|
MongoClient |
MongoClient.createCollection(String collectionName,
Handler<AsyncResult<Void>> resultHandler)
Create a new collection
|
MongoClient |
MongoClient.createCollectionWithOptions(String collectionName,
CreateCollectionOptions collectionOptions,
Handler<AsyncResult<Void>> resultHandler)
Create a new collection with options
|
MongoClient |
MongoClient.createDefaultGridFsBucketService(Handler<AsyncResult<MongoGridFsClient>> resultHandler)
Creates a
MongoGridFsClient used to interact with Mongo GridFS. |
MongoClient |
MongoClient.createGridFsBucketService(String bucketName,
Handler<AsyncResult<MongoGridFsClient>> resultHandler)
Creates a
MongoGridFsClient used to interact with Mongo GridFS. |
MongoClient |
MongoClient.createIndex(String collection,
JsonObject key,
Handler<AsyncResult<Void>> resultHandler)
Creates an index.
|
MongoClient |
MongoClient.createIndexes(String collection,
List<IndexModel> indexes,
Handler<AsyncResult<Void>> resultHandler)
creates an indexes
|
MongoClient |
MongoClient.createIndexWithOptions(String collection,
JsonObject key,
IndexOptions options,
Handler<AsyncResult<Void>> resultHandler)
Creates an index.
|
MongoGridFsClient |
MongoGridFsClient.delete(String id,
Handler<AsyncResult<Void>> resultHandler)
Deletes a file by it's ID
|
MongoClient |
MongoClient.distinct(String collection,
String fieldName,
String resultClassname,
DistinctOptions distinctOptions,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name.
|
MongoClient |
MongoClient.distinct(String collection,
String fieldName,
String resultClassname,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name.
|
MongoClient |
MongoClient.distinctWithQuery(String collection,
String fieldName,
String resultClassname,
JsonObject query,
DistinctOptions distinctOptions,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name filtered by specified query.
|
MongoClient |
MongoClient.distinctWithQuery(String collection,
String fieldName,
String resultClassname,
JsonObject query,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name filtered by specified query.
|
MongoGridFsClient |
MongoGridFsClient.downloadByFileName(WriteStream<Buffer> stream,
String fileName,
Handler<AsyncResult<Long>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.downloadByFileNameWithOptions(WriteStream<Buffer> stream,
String fileName,
GridFsDownloadOptions options,
Handler<AsyncResult<Long>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.downloadById(WriteStream<Buffer> stream,
String id,
Handler<AsyncResult<Long>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.downloadFile(String fileName,
Handler<AsyncResult<Long>> resultHandler)
Downloads a file.
|
MongoGridFsClient |
MongoGridFsClient.downloadFileAs(String fileName,
String newFileName,
Handler<AsyncResult<Long>> resultHandler)
Downloads a file and gives it a new name.
|
MongoGridFsClient |
MongoGridFsClient.downloadFileByID(String id,
String fileName,
Handler<AsyncResult<Long>> resultHandler)
Downloads a file using the ID generated by GridFs.
|
MongoGridFsClient |
MongoGridFsClient.drop(Handler<AsyncResult<Void>> resultHandler)
Drops the entire file bucket with all of its contents
|
MongoClient |
MongoClient.dropCollection(String collection,
Handler<AsyncResult<Void>> resultHandler)
Drop a collection
|
MongoClient |
MongoClient.dropIndex(String collection,
String indexName,
Handler<AsyncResult<Void>> resultHandler)
Drops the index given its name.
|
MongoClient |
MongoClient.find(String collection,
JsonObject query,
Handler<AsyncResult<List<JsonObject>>> resultHandler)
Find matching documents in the specified collection
|
MongoGridFsClient |
MongoGridFsClient.findAllIds(Handler<AsyncResult<List<String>>> resultHandler)
Finds all file ids in the bucket
|
MongoGridFsClient |
MongoGridFsClient.findIds(JsonObject query,
Handler<AsyncResult<List<String>>> resultHandler)
Finds all file ids that match a query.
|
MongoClient |
MongoClient.findOne(String collection,
JsonObject query,
JsonObject fields,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection
|
MongoClient |
MongoClient.findOneAndDelete(String collection,
JsonObject query,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and delete it.
|
MongoClient |
MongoClient.findOneAndDeleteWithOptions(String collection,
JsonObject query,
FindOptions findOptions,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and delete it.
|
MongoClient |
MongoClient.findOneAndReplace(String collection,
JsonObject query,
JsonObject replace,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and replace it.
|
MongoClient |
MongoClient.findOneAndReplaceWithOptions(String collection,
JsonObject query,
JsonObject replace,
FindOptions findOptions,
UpdateOptions updateOptions,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and replace it.
|
MongoClient |
MongoClient.findOneAndUpdate(String collection,
JsonObject query,
JsonObject update,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and update it.
|
MongoClient |
MongoClient.findOneAndUpdateWithOptions(String collection,
JsonObject query,
JsonObject update,
FindOptions findOptions,
UpdateOptions updateOptions,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and update it.
|
MongoClient |
MongoClient.findWithOptions(String collection,
JsonObject query,
FindOptions options,
Handler<AsyncResult<List<JsonObject>>> resultHandler)
Find matching documents in the specified collection, specifying options
|
MongoClient |
MongoClient.getCollections(Handler<AsyncResult<List<String>>> resultHandler)
Get a list of all collections in the database.
|
MongoClient |
MongoClient.insert(String collection,
JsonObject document,
Handler<AsyncResult<String>> resultHandler)
Insert a document in the specified collection
|
MongoClient |
MongoClient.insertWithOptions(String collection,
JsonObject document,
WriteOption writeOption,
Handler<AsyncResult<String>> resultHandler)
Insert a document in the specified collection with the specified write option
|
MongoClient |
MongoClient.listIndexes(String collection,
Handler<AsyncResult<JsonArray>> resultHandler)
Get all the indexes in this collection.
|
MongoClient |
MongoClient.removeDocument(String collection,
JsonObject query,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove a single matching document from a collection and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.removeDocuments(String collection,
JsonObject query,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove matching documents from a collection and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.removeDocumentsWithOptions(String collection,
JsonObject query,
WriteOption writeOption,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove matching documents from a collection with the specified write option and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.removeDocumentWithOptions(String collection,
JsonObject query,
WriteOption writeOption,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove a single matching document from a collection with the specified write option and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.replaceDocuments(String collection,
JsonObject query,
JsonObject replace,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Replace matching documents in the specified collection and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.replaceDocumentsWithOptions(String collection,
JsonObject query,
JsonObject replace,
UpdateOptions options,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Replace matching documents in the specified collection, specifying options and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.runCommand(String commandName,
JsonObject command,
Handler<AsyncResult<JsonObject>> resultHandler)
Run an arbitrary MongoDB command.
|
MongoClient |
MongoClient.save(String collection,
JsonObject document,
Handler<AsyncResult<String>> resultHandler)
Save a document in the specified collection
|
MongoClient |
MongoClient.saveWithOptions(String collection,
JsonObject document,
WriteOption writeOption,
Handler<AsyncResult<String>> resultHandler)
Save a document in the specified collection with the specified write option
|
MongoClient |
MongoClient.updateCollection(String collection,
JsonObject query,
JsonArray update,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Use an aggregation pipeline to update documents in the specified collection and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.updateCollection(String collection,
JsonObject query,
JsonObject update,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Update matching documents in the specified collection and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.updateCollectionWithOptions(String collection,
JsonObject query,
JsonArray update,
UpdateOptions options,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Use an aggregation pipeline to update documents in the specified collection, specifying options and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.updateCollectionWithOptions(String collection,
JsonObject query,
JsonObject update,
UpdateOptions options,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Update matching documents in the specified collection, specifying options and return the handler with
MongoClientUpdateResult result |
MongoGridFsClient |
MongoGridFsClient.uploadByFileName(Flowable<Buffer> stream,
String fileName,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadByFileName(ReadStream<Buffer> stream,
String fileName,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadByFileNameWithOptions(Flowable<Buffer> stream,
String fileName,
GridFsUploadOptions options,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadByFileNameWithOptions(ReadStream<Buffer> stream,
String fileName,
GridFsUploadOptions options,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadFile(String fileName,
Handler<AsyncResult<String>> resultHandler)
Upload a file to gridfs
|
MongoGridFsClient |
MongoGridFsClient.uploadFileWithOptions(String fileName,
GridFsUploadOptions options,
Handler<AsyncResult<String>> resultHandler)
Upload a file to gridfs with options
|
| Modifier and Type | Method and Description |
|---|---|
void |
ShellServer.close(Handler<AsyncResult<Void>> completionHandler)
Close the shell server, this is an asynchronous close.
|
ShellServer |
ShellServer.listen(Handler<AsyncResult<Void>> listenHandler)
Start the shell service, this is an asynchronous start.
|
void |
ShellService.start(Handler<AsyncResult<Void>> startHandler)
Start the shell service, this is an asynchronous start.
|
void |
ShellService.stop(Handler<AsyncResult<Void>> stopHandler)
Stop the shell service, this is an asynchronous start.
|
| Modifier and Type | Method and Description |
|---|---|
CommandRegistry |
CommandRegistry.registerCommand(Command command,
Handler<AsyncResult<Command>> completionHandler)
Register a command
|
CommandRegistry |
CommandRegistry.registerCommands(List<Command> commands,
Handler<AsyncResult<List<Command>>> completionHandler)
Register a list of commands.
|
CommandRegistry |
CommandRegistry.unregisterCommand(String commandName,
Handler<AsyncResult<Void>> completionHandler)
Unregister a command.
|
| Modifier and Type | Method and Description |
|---|---|
void |
TermServer.close(Handler<AsyncResult<Void>> completionHandler)
Like
TermServer.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but supplying a handler that will be notified when close is complete. |
TermServer |
TermServer.listen(Handler<AsyncResult<Void>> listenHandler)
Bind the term server, the
TermServer.termHandler(io.vertx.core.Handler<io.vertx.reactivex.ext.shell.term.Term>) must be set before. |
| Modifier and Type | Method and Description |
|---|---|
SQLConnection |
SQLConnection.batch(List<String> sqlStatements,
Handler<AsyncResult<List<Integer>>> handler)
Batch simple SQL strings and execute the batch where the async result contains a array of Integers.
|
SQLConnection |
SQLConnection.batchCallableWithParams(String sqlStatement,
List<JsonArray> inArgs,
List<JsonArray> outArgs,
Handler<AsyncResult<List<Integer>>> handler)
Batch a callable statement with all entries from the args list.
|
SQLConnection |
SQLConnection.batchWithParams(String sqlStatement,
List<JsonArray> args,
Handler<AsyncResult<List<Integer>>> handler)
Batch a prepared statement with all entries from the args list.
|
SQLConnection |
SQLConnection.call(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLClient |
SQLClient.call(String sql,
Handler<AsyncResult<ResultSet>> handler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLOperations |
SQLOperations.call(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLConnection |
SQLConnection.callWithParams(String sql,
JsonArray params,
JsonArray outputs,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLClient |
SQLClient.callWithParams(String sql,
JsonArray params,
JsonArray outputs,
Handler<AsyncResult<ResultSet>> handler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLOperations |
SQLOperations.callWithParams(String sql,
JsonArray params,
JsonArray outputs,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
void |
SQLRowStream.close(Handler<AsyncResult<Void>> handler)
Closes the stream/underlying cursor(s).
|
void |
SQLConnection.close(Handler<AsyncResult<Void>> handler)
Closes the connection.
|
void |
SQLClient.close(Handler<AsyncResult<Void>> handler)
Close the client and release all resources.
|
SQLConnection |
SQLConnection.commit(Handler<AsyncResult<Void>> handler)
Commits all changes made since the previous commit/rollback.
|
SQLConnection |
SQLConnection.execute(String sql,
Handler<AsyncResult<Void>> resultHandler)
Executes the given SQL statement
|
SQLClient |
SQLClient.getConnection(Handler<AsyncResult<SQLConnection>> handler)
Returns a connection that can be used to perform SQL operations on.
|
SQLConnection |
SQLConnection.getTransactionIsolation(Handler<AsyncResult<TransactionIsolation>> handler)
Attempts to return the transaction isolation level for this Connection object to the one given.
|
void |
SQLRowStream.pipeTo(WriteStream<JsonArray> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
SQLConnection |
SQLConnection.query(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT statement which returns the results of the query. |
SQLClient |
SQLClient.query(String sql,
Handler<AsyncResult<ResultSet>> handler)
Execute a single SQL statement, this method acquires a connection from the the pool and executes the SQL
statement and returns it back after the execution.
|
SQLOperations |
SQLOperations.query(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT statement which returns the results of the query. |
SQLOperations |
SQLConnection.querySingle(String sql,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement that returns a single SQL row.
|
SQLOperations |
SQLClient.querySingle(String sql,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement that returns a single SQL row.
|
SQLOperations |
SQLOperations.querySingle(String sql,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement that returns a single SQL row.
|
SQLOperations |
SQLConnection.querySingleWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement with arguments that returns a single SQL row.
|
SQLOperations |
SQLClient.querySingleWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement with arguments that returns a single SQL row.
|
SQLOperations |
SQLOperations.querySingleWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement with arguments that returns a single SQL row.
|
SQLConnection |
SQLConnection.queryStream(String sql,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLClient |
SQLClient.queryStream(String sql,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLOperations |
SQLOperations.queryStream(String sql,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLConnection |
SQLConnection.queryStreamWithParams(String sql,
JsonArray params,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLClient |
SQLClient.queryStreamWithParams(String sql,
JsonArray params,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLOperations |
SQLOperations.queryStreamWithParams(String sql,
JsonArray params,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLConnection |
SQLConnection.queryWithParams(String sql,
JsonArray params,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT prepared statement which returns the results of the query. |
SQLClient |
SQLClient.queryWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<ResultSet>> handler)
Execute a single SQL prepared statement, this method acquires a connection from the the pool and executes the SQL
prepared statement and returns it back after the execution.
|
SQLOperations |
SQLOperations.queryWithParams(String sql,
JsonArray params,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT prepared statement which returns the results of the query. |
SQLConnection |
SQLConnection.rollback(Handler<AsyncResult<Void>> handler)
Rolls back all changes made since the previous commit/rollback.
|
SQLConnection |
SQLConnection.setAutoCommit(boolean autoCommit,
Handler<AsyncResult<Void>> resultHandler)
Sets the auto commit flag for this connection.
|
SQLConnection |
SQLConnection.setTransactionIsolation(TransactionIsolation isolation,
Handler<AsyncResult<Void>> handler)
Attempts to change the transaction isolation level for this Connection object to the one given.
|
SQLConnection |
SQLConnection.update(String sql,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given SQL statement which may be an
INSERT, UPDATE, or DELETE
statement. |
SQLClient |
SQLClient.update(String sql,
Handler<AsyncResult<UpdateResult>> handler)
Executes the given SQL statement which may be an
INSERT, UPDATE, or DELETE
statement. |
SQLOperations |
SQLOperations.update(String sql,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given SQL statement which may be an
INSERT, UPDATE, or DELETE
statement. |
SQLConnection |
SQLConnection.updateWithParams(String sql,
JsonArray params,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given prepared statement which may be an
INSERT, UPDATE, or DELETE
statement with the given parameters |
SQLClient |
SQLClient.updateWithParams(String sql,
JsonArray params,
Handler<AsyncResult<UpdateResult>> handler)
Executes the given prepared statement which may be an
INSERT, UPDATE, or DELETE
statement with the given parameters |
SQLOperations |
SQLOperations.updateWithParams(String sql,
JsonArray params,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given prepared statement which may be an
INSERT, UPDATE, or DELETE
statement with the given parameters |
| Modifier and Type | Method and Description |
|---|---|
StompClientConnection |
StompClientConnection.abort(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Aborts a transaction.
|
StompClientConnection |
StompClientConnection.abort(String id,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Aborts a transaction.
|
StompClientConnection |
StompClientConnection.ack(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Sends an acknowledgement for a specific message.
|
StompClientConnection |
StompClientConnection.ack(String id,
String txId,
Handler<AsyncResult<Frame>> receiptHandler)
Sends an acknowledgement for the given frame.
|
StompClientConnection |
StompClientConnection.beginTX(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Begins a transaction.
|
StompClientConnection |
StompClientConnection.beginTX(String id,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Begins a transaction.
|
void |
StompServer.close(Handler<AsyncResult<Void>> completionHandler)
Closes the server.
|
StompClientConnection |
StompClientConnection.commit(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Commits a transaction.
|
StompClientConnection |
StompClientConnection.commit(String id,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Commits a transaction.
|
StompClient |
StompClient.connect(Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server using the host and port configured in the client's options.
|
StompClient |
StompClient.connect(int port,
String host,
Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server.
|
StompClient |
StompClient.connect(int port,
String host,
NetClient net,
Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server.
|
StompClient |
StompClient.connect(NetClient net,
Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server.
|
StompClientConnection |
StompClientConnection.disconnect(Frame frame,
Handler<AsyncResult<Frame>> receiptHandler)
Disconnects the client.
|
StompClientConnection |
StompClientConnection.disconnect(Handler<AsyncResult<Frame>> receiptHandler)
Disconnects the client.
|
StompServer |
StompServer.listen(Handler<AsyncResult<StompServer>> handler)
Connects the STOMP server default port (61613) and network interface (
0.0.0.0). |
StompServer |
StompServer.listen(int port,
Handler<AsyncResult<StompServer>> handler)
Connects the STOMP server to the given port.
|
StompServer |
StompServer.listen(int port,
String host,
Handler<AsyncResult<StompServer>> handler)
Connects the STOMP server to the given port / interface.
|
StompClientConnection |
StompClientConnection.nack(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a non-acknowledgement for the given message.
|
StompClientConnection |
StompClientConnection.nack(String id,
String txId,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a non-acknowledgement for the given frame.
|
StompServerHandler |
StompServerHandler.onAuthenticationRequest(StompServerConnection connection,
String login,
String passcode,
Handler<AsyncResult<Boolean>> handler)
Called when the client connects to a server requiring authentication.
|
StompClientConnection |
StompClientConnection.send(Frame frame,
Handler<AsyncResult<Frame>> receiptHandler)
Sends the given frame to the server.
|
StompClientConnection |
StompClientConnection.send(Map<String,String> headers,
Buffer body,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a
SEND frame to the server. |
StompClientConnection |
StompClientConnection.send(String destination,
Buffer body,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a
SEND frame to the server to the given destination. |
StompClientConnection |
StompClientConnection.send(String destination,
Map<String,String> headers,
Buffer body,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a
SEND frame to the server to the given destination. |
StompClientConnection |
StompClientConnection.subscribe(String destination,
Handler<Frame> handler,
Handler<AsyncResult<String>> receiptHandler)
Subscribes to the given destination.
|
StompClientConnection |
StompClientConnection.subscribe(String destination,
Map<String,String> headers,
Handler<Frame> handler,
Handler<AsyncResult<String>> receiptHandler)
Subscribes to the given destination.
|
StompClientConnection |
StompClientConnection.unsubscribe(String destination,
Handler<AsyncResult<Frame>> receiptHandler)
Un-subscribes from the given destination.
|
StompClientConnection |
StompClientConnection.unsubscribe(String destination,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Un-subscribes from the given destination.
|
| Modifier and Type | Method and Description |
|---|---|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertFailure()
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a failed result it completes the async operation.
When the returned handler is called back with a succeeded result it fails the test.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertFailure(Handler<Throwable> causeHandler)
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a failed result it completes the async operation.
When the returned handler is called back with a succeeded result it fails the test.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertSuccess()
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a succeeded result it completes the async operation.
When the returned handler is called back with a failed result it fails the test with the cause of the failure.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertSuccess(Handler<T> resultHandler)
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a succeeded result it invokes the
resultHandler argument
with the async result. |
| Modifier and Type | Method and Description |
|---|---|
void |
Completion.handler(Handler<AsyncResult<T>> completionHandler)
Completion handler to receive a completion signal when this completions completes.
|
void |
Async.handler(Handler<AsyncResult<Void>> completionHandler)
Completion handler to receive a completion signal when this completions completes.
|
void |
TestCompletion.handler(Handler<AsyncResult<Void>> completionHandler)
Completion handler to receive a completion signal when this completions completes.
|
| Modifier and Type | Method and Description |
|---|---|
void |
TestSuiteReport.pipeTo(WriteStream<TestCaseReport> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
| Modifier and Type | Method and Description |
|---|---|
int |
RoutingContext.addEndHandler(Handler<AsyncResult<Void>> handler)
Add an end handler for the request/response context.
|
RoutingContext |
RoutingContext.end(Buffer buffer,
Handler<AsyncResult<Void>> handler)
|
RoutingContext |
RoutingContext.end(Handler<AsyncResult<Void>> handler)
|
RoutingContext |
RoutingContext.end(String chunk,
Handler<AsyncResult<Void>> handler)
|
RoutingContext |
RoutingContext.json(Object json,
Handler<AsyncResult<Void>> handler)
|
RoutingContext |
RoutingContext.redirect(String url,
Handler<AsyncResult<Void>> handler)
|
| Modifier and Type | Method and Description |
|---|---|
static void |
OpenAPI3RouterFactory.create(Vertx vertx,
String url,
Handler<AsyncResult<OpenAPI3RouterFactory>> handler)
Deprecated.
|
static void |
OpenAPI3RouterFactory.create(Vertx vertx,
String url,
List<JsonObject> auth,
Handler<AsyncResult<OpenAPI3RouterFactory>> handler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
void |
TemplateEngine.render(JsonObject context,
String templateFileName,
Handler<AsyncResult<Buffer>> handler)
Render the template.
|
void |
TemplateEngine.render(Map<String,Object> context,
String templateFileName,
Handler<AsyncResult<Buffer>> handler)
Render the template.
|
| Modifier and Type | Method and Description |
|---|---|
SessionHandler |
SessionHandler.flush(RoutingContext ctx,
boolean ignoreStatus,
Handler<AsyncResult<Void>> handler)
Flush a context session earlier to the store, this will allow the end user to have full control on the event of
a failure at the store level.
|
SessionHandler |
SessionHandler.flush(RoutingContext ctx,
Handler<AsyncResult<Void>> handler)
Flush a context session earlier to the store, this will allow the end user to have full control on the event of
a failure at the store level.
|
SessionHandler |
SessionHandler.setUser(RoutingContext context,
User user,
Handler<AsyncResult<Void>> handler)
Set the user for the session
|
| Modifier and Type | Method and Description |
|---|---|
void |
SockJSSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
SockJSSocket.end(Handler<AsyncResult<Void>> handler)
Same as
SockJSSocket.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
SockJSSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
SockJSSocket.write(Buffer data,
Handler<AsyncResult<Void>> handler) |
void |
SockJSSocket.write(String data,
Handler<AsyncResult<Void>> handler) |
| Modifier and Type | Method and Description |
|---|---|
static void |
RouterBuilder.create(Vertx vertx,
String url,
Handler<AsyncResult<RouterBuilder>> handler)
Like
|
static void |
RouterBuilder.create(Vertx vertx,
String url,
OpenAPILoaderOptions options,
Handler<AsyncResult<RouterBuilder>> handler)
Like
|
| Modifier and Type | Method and Description |
|---|---|
SessionStore |
SessionStore.clear(Handler<AsyncResult<Void>> resultHandler)
Remove all sessions from the store.
|
SessionStore |
SessionStore.delete(String id,
Handler<AsyncResult<Void>> resultHandler)
Delete the session with the specified ID.
|
SessionStore |
SessionStore.get(String cookieValue,
Handler<AsyncResult<Session>> resultHandler)
Get the session with the specified ID.
|
SessionStore |
SessionStore.put(Session session,
Handler<AsyncResult<Void>> resultHandler)
Add a session with the specified ID.
|
SessionStore |
SessionStore.size(Handler<AsyncResult<Integer>> resultHandler)
Get the number of sessions in the store.
|
| Modifier and Type | Method and Description |
|---|---|
void |
GrpcClientRequest.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
GrpcClientRequest.end(Req data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
GrpcClientResponse.pipeTo(WriteStream<Resp> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
GrpcClientRequest.write(Req data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
GrpcWriteStream.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
GrpcWriteStream.end(T data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
GrpcReadStream.pipeTo(WriteStream<T> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
GrpcWriteStream.write(T data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
GrpcServerResponse.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
GrpcServerResponse.end(Resp data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
GrpcServerRequest.pipeTo(WriteStream<Req> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
GrpcServerResponse.write(Resp data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
SchemaRouter.resolveRef(JsonPointer pointer,
JsonPointer scope,
SchemaParser schemaParser,
Handler<AsyncResult<Schema>> handler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
void |
KafkaAdminClient.close(Handler<AsyncResult<Void>> handler)
Close the admin client
|
void |
KafkaAdminClient.close(long timeout,
Handler<AsyncResult<Void>> handler)
Close the admin client
|
void |
KafkaAdminClient.createAcls(List<org.apache.kafka.common.acl.AclBinding> aclBindings,
Handler<AsyncResult<List<org.apache.kafka.common.acl.AclBinding>>> completionHandler)
Create the ACL rules.
|
void |
KafkaAdminClient.createPartitions(Map<String,NewPartitions> partitions,
Handler<AsyncResult<Void>> completionHandler)
Creates a batch of new partitions in the Kafka topic
|
void |
KafkaAdminClient.createTopics(List<NewTopic> topics,
Handler<AsyncResult<Void>> completionHandler)
Creates a batch of new Kafka topics
|
void |
KafkaAdminClient.deleteAcls(List<org.apache.kafka.common.acl.AclBindingFilter> aclBindings,
Handler<AsyncResult<List<org.apache.kafka.common.acl.AclBinding>>> completionHandler)
Delete the ACL rules.
|
void |
KafkaAdminClient.deleteConsumerGroupOffsets(String groupId,
Set<TopicPartition> partitions,
Handler<AsyncResult<Void>> completionHandler)
Delete committed offsets for a set of partitions in a consumer group.
|
void |
KafkaAdminClient.deleteConsumerGroups(List<String> groupIds,
Handler<AsyncResult<Void>> completionHandler)
Delete consumer groups from the cluster.
|
void |
KafkaAdminClient.deleteTopics(List<String> topicNames,
Handler<AsyncResult<Void>> completionHandler)
Deletes a batch of Kafka topics
|
void |
KafkaAdminClient.describeAcls(org.apache.kafka.common.acl.AclBindingFilter aclBindingFilter,
Handler<AsyncResult<List<org.apache.kafka.common.acl.AclBinding>>> completionHandler)
Describe the ACL rules.
|
void |
KafkaAdminClient.describeCluster(DescribeClusterOptions options,
Handler<AsyncResult<ClusterDescription>> completionHandler)
Like
KafkaAdminClient.describeCluster(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.kafka.admin.ClusterDescription>>) but allows customized options. |
void |
KafkaAdminClient.describeCluster(Handler<AsyncResult<ClusterDescription>> completionHandler)
Describe the nodes in the cluster with the default options
|
void |
KafkaAdminClient.describeConsumerGroups(List<String> groupIds,
DescribeConsumerGroupsOptions options,
Handler<AsyncResult<Map<String,ConsumerGroupDescription>>> completionHandler)
|
void |
KafkaAdminClient.describeConsumerGroups(List<String> groupIds,
Handler<AsyncResult<Map<String,ConsumerGroupDescription>>> completionHandler)
Describe some group ids in the cluster, with the default options
|
void |
KafkaAdminClient.describeTopics(List<String> topicNames,
DescribeTopicsOptions options,
Handler<AsyncResult<Map<String,TopicDescription>>> completionHandler)
|
void |
KafkaAdminClient.describeTopics(List<String> topicNames,
Handler<AsyncResult<Map<String,TopicDescription>>> completionHandler)
Describe some topics in the cluster, with the default options.
|
void |
KafkaAdminClient.listConsumerGroups(Handler<AsyncResult<List<ConsumerGroupListing>>> completionHandler)
Get the the consumer groups available in the cluster with the default options
|
void |
KafkaAdminClient.listTopics(Handler<AsyncResult<Set<String>>> completionHandler)
List the topics available in the cluster with the default options.
|
| Modifier and Type | Method and Description |
|---|---|
KafkaConsumer<K,V> |
KafkaConsumer.assign(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Manually assign a list of partition to this consumer.
|
KafkaConsumer<K,V> |
KafkaConsumer.assign(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Manually assign a partition to this consumer.
|
KafkaConsumer<K,V> |
KafkaConsumer.assignment(Handler<AsyncResult<Set<TopicPartition>>> handler)
Get the set of partitions currently assigned to this consumer.
|
void |
KafkaConsumer.beginningOffsets(TopicPartition topicPartition,
Handler<AsyncResult<Long>> handler)
Get the first offset for the given partitions.
|
void |
KafkaConsumer.close(Handler<AsyncResult<Void>> completionHandler)
Close the consumer
|
void |
KafkaConsumer.commit(Handler<AsyncResult<Void>> completionHandler)
Commit current offsets for all the subscribed list of topics and partition.
|
void |
KafkaConsumer.committed(TopicPartition topicPartition,
Handler<AsyncResult<OffsetAndMetadata>> handler)
Get the last committed offset for the given partition (whether the commit happened by this process or another).
|
void |
KafkaConsumer.endOffsets(TopicPartition topicPartition,
Handler<AsyncResult<Long>> handler)
Get the last offset for the given partition.
|
void |
KafkaConsumer.offsetsForTimes(TopicPartition topicPartition,
Long timestamp,
Handler<AsyncResult<OffsetAndTimestamp>> handler)
Look up the offset for the given partition by timestamp.
|
KafkaConsumer<K,V> |
KafkaConsumer.partitionsFor(String topic,
Handler<AsyncResult<List<PartitionInfo>>> handler)
Get metadata about the partitions for a given topic.
|
KafkaConsumer<K,V> |
KafkaConsumer.pause(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Suspend fetching from the requested partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.pause(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Suspend fetching from the requested partition.
|
void |
KafkaConsumer.paused(Handler<AsyncResult<Set<TopicPartition>>> handler)
Get the set of partitions that were previously paused by a call to pause(Set).
|
void |
KafkaConsumer.pipeTo(WriteStream<KafkaConsumerRecord<K,V>> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
KafkaConsumer.poll(java.time.Duration timeout,
Handler<AsyncResult<KafkaConsumerRecords<K,V>>> handler)
Executes a poll for getting messages from Kafka.
|
void |
KafkaConsumer.position(TopicPartition partition,
Handler<AsyncResult<Long>> handler)
Get the offset of the next record that will be fetched (if a record with that offset exists).
|
KafkaConsumer<K,V> |
KafkaConsumer.resume(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Resume specified partitions which have been paused with pause.
|
KafkaConsumer<K,V> |
KafkaConsumer.resume(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Resume specified partition which have been paused with pause.
|
KafkaConsumer<K,V> |
KafkaConsumer.seek(TopicPartition topicPartition,
long offset,
Handler<AsyncResult<Void>> completionHandler)
Overrides the fetch offsets that the consumer will use on the next poll.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToBeginning(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Seek to the first offset for each of the given partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToBeginning(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Seek to the first offset for each of the given partition.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToEnd(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Seek to the last offset for each of the given partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToEnd(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Seek to the last offset for each of the given partition.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscribe(Set<String> topics,
Handler<AsyncResult<Void>> completionHandler)
Subscribe to the given list of topics to get dynamically assigned partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscribe(String topic,
Handler<AsyncResult<Void>> completionHandler)
Subscribe to the given topic to get dynamically assigned partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscription(Handler<AsyncResult<Set<String>>> handler)
Get the current subscription.
|
KafkaConsumer<K,V> |
KafkaConsumer.unsubscribe(Handler<AsyncResult<Void>> completionHandler)
Unsubscribe from topics currently subscribed with subscribe.
|
| Modifier and Type | Method and Description |
|---|---|
KafkaProducer<K,V> |
KafkaProducer.abortTransaction(Handler<AsyncResult<Void>> handler)
Aborts the ongoing transaction.
|
KafkaProducer<K,V> |
KafkaProducer.beginTransaction(Handler<AsyncResult<Void>> handler)
Starts a new kafka transaction.
|
void |
KafkaProducer.close(Handler<AsyncResult<Void>> completionHandler)
Close the producer
|
void |
KafkaProducer.close(long timeout,
Handler<AsyncResult<Void>> completionHandler)
Close the producer
|
KafkaProducer<K,V> |
KafkaProducer.commitTransaction(Handler<AsyncResult<Void>> handler)
Commits the ongoing transaction.
|
void |
KafkaProducer.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
KafkaProducer.end(KafkaProducerRecord<K,V> data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
KafkaProducer<K,V> |
KafkaProducer.flush(Handler<AsyncResult<Void>> completionHandler)
Invoking this method makes all buffered records immediately available to write
|
KafkaProducer<K,V> |
KafkaProducer.initTransactions(Handler<AsyncResult<Void>> handler)
Initializes the underlying kafka transactional producer.
|
KafkaProducer<K,V> |
KafkaProducer.partitionsFor(String topic,
Handler<AsyncResult<List<PartitionInfo>>> handler)
Get the partition metadata for the give topic.
|
KafkaProducer<K,V> |
KafkaProducer.send(KafkaProducerRecord<K,V> record,
Handler<AsyncResult<RecordMetadata>> handler)
Asynchronously write a record to a topic
|
void |
KafkaProducer.write(KafkaProducerRecord<K,V> data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
MqttServer.close(Handler<AsyncResult<Void>> completionHandler)
Close the server supplying an handler that will be called when the server is actually closed (or has failed).
|
MqttClient |
MqttClient.connect(int port,
String host,
Handler<AsyncResult<MqttConnAckMessage>> connectHandler)
Connects to an MQTT server calling connectHandler after connection
|
MqttClient |
MqttClient.connect(int port,
String host,
String serverName,
Handler<AsyncResult<MqttConnAckMessage>> connectHandler)
Connects to an MQTT server calling connectHandler after connection
|
MqttClient |
MqttClient.disconnect(Handler<AsyncResult<Void>> disconnectHandler)
Disconnects from the MQTT server calling disconnectHandler after disconnection
|
MqttServer |
MqttServer.listen(Handler<AsyncResult<MqttServer>> listenHandler)
Start the server listening for incoming connections using the specified options
through the constructor
|
MqttServer |
MqttServer.listen(int port,
Handler<AsyncResult<MqttServer>> listenHandler)
Start the server listening for incoming connections on the port specified but on
"0.0.0.0" as host.
|
MqttServer |
MqttServer.listen(int port,
String host,
Handler<AsyncResult<MqttServer>> listenHandler)
Start the server listening for incoming connections on the port and host specified
It ignores any options specified through the constructor
|
MqttClient |
MqttClient.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server
|
MqttEndpoint |
MqttEndpoint.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server
|
MqttEndpoint |
MqttEndpoint.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
int messageId,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server explicitly specifying the messageId
|
MqttEndpoint |
MqttEndpoint.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
int messageId,
MqttProperties properties,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server explicitly specifying the messageId
|
MqttClient |
MqttClient.subscribe(Map<String,Integer> topics,
Handler<AsyncResult<Integer>> subscribeSentHandler)
Subscribes to the topic and adds a handler which will be called after the request is sent
|
MqttClient |
MqttClient.subscribe(String topic,
int qos,
Handler<AsyncResult<Integer>> subscribeSentHandler)
Subscribes to the topic with a specified QoS level
|
MqttClient |
MqttClient.unsubscribe(List<String> topics,
Handler<AsyncResult<Integer>> unsubscribeSentHandler)
Unsubscribe from receiving messages on given topics
|
MqttClient |
MqttClient.unsubscribe(String topic,
Handler<AsyncResult<Integer>> unsubscribeSentHandler)
Unsubscribe from receiving messages on given topic
|
| Modifier and Type | Method and Description |
|---|---|
static void |
MSSQLConnection.connect(Vertx vertx,
MSSQLConnectOptions connectOptions,
Handler<AsyncResult<MSSQLConnection>> handler)
Create a connection to SQL Server with the given
connectOptions. |
static void |
MSSQLConnection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<MSSQLConnection>> handler)
|
MSSQLConnection |
MSSQLConnection.prepare(String s,
Handler<AsyncResult<PreparedStatement>> handler) |
| Modifier and Type | Method and Description |
|---|---|
MySQLConnection |
MySQLConnection.changeUser(MySQLAuthOptions options,
Handler<AsyncResult<Void>> handler)
Send a CHANGE_USER command to change the user of the current connection, this operation will also reset connection state.
|
static void |
MySQLConnection.connect(Vertx vertx,
MySQLConnectOptions connectOptions,
Handler<AsyncResult<MySQLConnection>> handler)
Create a connection to MySQL server with the given
connectOptions. |
static void |
MySQLConnection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<MySQLConnection>> handler)
|
MySQLConnection |
MySQLConnection.debug(Handler<AsyncResult<Void>> handler)
Send a DEBUG command to dump debug information to the server's stdout.
|
MySQLConnection |
MySQLConnection.getInternalStatistics(Handler<AsyncResult<String>> handler)
Send a STATISTICS command to get a human readable string of the server internal status.
|
MySQLConnection |
MySQLConnection.ping(Handler<AsyncResult<Void>> handler)
Send a PING command to check if the server is alive.
|
MySQLConnection |
MySQLConnection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler) |
MySQLConnection |
MySQLConnection.resetConnection(Handler<AsyncResult<Void>> handler)
Send a RESET_CONNECTION command to reset the session state.
|
MySQLConnection |
MySQLConnection.setOption(MySQLSetOption option,
Handler<AsyncResult<Void>> handler)
Send a SET_OPTION command to set options for the current connection.
|
MySQLConnection |
MySQLConnection.specifySchema(String schemaName,
Handler<AsyncResult<Void>> handler)
Send a INIT_DB command to change the default schema of the connection.
|
| Modifier and Type | Method and Description |
|---|---|
static void |
OracleConnection.connect(Vertx vertx,
io.vertx.oracleclient.OracleConnectOptions connectOptions,
Handler<AsyncResult<OracleConnection>> handler)
Create a connection to Oracle with the given
connectOptions. |
OracleConnection |
OracleConnection.prepare(String s,
Handler<AsyncResult<PreparedStatement>> handler) |
| Modifier and Type | Method and Description |
|---|---|
PgConnection |
PgConnection.cancelRequest(Handler<AsyncResult<Void>> handler)
Send a request cancellation message to tell the server to cancel processing request in this connection.
|
static void |
PgConnection.connect(Vertx vertx,
Handler<AsyncResult<PgConnection>> handler)
Like
PgConnection.connect(io.vertx.reactivex.core.Vertx, io.vertx.pgclient.PgConnectOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.reactivex.pgclient.PgConnection>>) with options build from the environment variables. |
static void |
PgConnection.connect(Vertx vertx,
PgConnectOptions options,
Handler<AsyncResult<PgConnection>> handler)
Connects to the database and returns the connection if that succeeds.
|
static void |
PgConnection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<PgConnection>> handler)
|
PgConnection |
PgConnection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler) |
| Modifier and Type | Method and Description |
|---|---|
void |
PgSubscriber.close(Handler<AsyncResult<Void>> handler)
Close the subscriber, the retry policy will not be invoked.
|
PgSubscriber |
PgSubscriber.connect(Handler<AsyncResult<Void>> handler)
Connect the subscriber to Postgres.
|
void |
PgChannel.pipeTo(WriteStream<String> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
| Modifier and Type | Method and Description |
|---|---|
void |
RabbitMQClient.addConfirmListener(int maxQueueSize,
Handler<AsyncResult<ReadStream<RabbitMQConfirmation>>> resultHandler)
Add a Confirm Listener to the channel.
|
void |
RabbitMQClient.basicAck(long deliveryTag,
boolean multiple,
Handler<AsyncResult<Void>> resultHandler)
Acknowledge one or several received messages.
|
void |
RabbitMQClient.basicConsumer(String queue,
Handler<AsyncResult<RabbitMQConsumer>> resultHandler) |
void |
RabbitMQClient.basicConsumer(String queue,
QueueOptions options,
Handler<AsyncResult<RabbitMQConsumer>> resultHandler)
Create a consumer with the given
options. |
void |
RabbitMQClient.basicGet(String queue,
boolean autoAck,
Handler<AsyncResult<RabbitMQMessage>> resultHandler)
Retrieve a message from a queue using AMQP.Basic.Get
|
void |
RabbitMQClient.basicNack(long deliveryTag,
boolean multiple,
boolean requeue,
Handler<AsyncResult<Void>> resultHandler)
Reject one or several received messages.
|
void |
RabbitMQClient.basicPublish(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQClient.basicPublish(String exchange,
String routingKey,
Buffer body,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQClient.basicPublishWithDeliveryTag(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<Long> deliveryTagHandler,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQClient.basicQos(int prefetchCount,
boolean global,
Handler<AsyncResult<Void>> resultHandler)
Request a specific prefetchCount "quality of service" settings
for this channel.
|
void |
RabbitMQClient.basicQos(int prefetchCount,
Handler<AsyncResult<Void>> resultHandler)
Request a specific prefetchCount "quality of service" settings
for this channel.
|
void |
RabbitMQClient.basicQos(int prefetchSize,
int prefetchCount,
boolean global,
Handler<AsyncResult<Void>> resultHandler)
Request specific "quality of service" settings.
|
void |
RabbitMQConsumer.cancel(Handler<AsyncResult<Void>> cancelResult)
Stop message consumption from a queue.
|
void |
RabbitMQClient.confirmSelect(Handler<AsyncResult<Void>> resultHandler)
Enables publisher acknowledgements on this channel.
|
void |
RabbitMQClient.exchangeBind(String destination,
String source,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Bind an exchange to an exchange.
|
void |
RabbitMQClient.exchangeBind(String destination,
String source,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Bind an exchange to an exchange.
|
void |
RabbitMQClient.exchangeDeclare(String exchange,
String type,
boolean durable,
boolean autoDelete,
Handler<AsyncResult<Void>> resultHandler)
Declare an exchange.
|
void |
RabbitMQClient.exchangeDeclare(String exchange,
String type,
boolean durable,
boolean autoDelete,
JsonObject config,
Handler<AsyncResult<Void>> resultHandler)
Declare an exchange with additional parameters such as dead lettering, an alternate exchange or TTL.
|
void |
RabbitMQClient.exchangeDelete(String exchange,
Handler<AsyncResult<Void>> resultHandler)
Delete an exchange, without regard for whether it is in use or not.
|
void |
RabbitMQClient.exchangeUnbind(String destination,
String source,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Unbind an exchange from an exchange.
|
void |
RabbitMQClient.exchangeUnbind(String destination,
String source,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Unbind an exchange from an exchange.
|
void |
RabbitMQClient.messageCount(String queue,
Handler<AsyncResult<Long>> resultHandler)
Returns the number of messages in a queue ready to be delivered.
|
void |
RabbitMQConsumer.pipeTo(WriteStream<RabbitMQMessage> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
RabbitMQPublisher.publish(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQPublisher.publishConfirm(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<AsyncResult<Long>> resultHandler)
Publish a message and complete when publish confirm has returned.
|
void |
RabbitMQClient.queueBind(String queue,
String exchange,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Bind a queue to an exchange
|
void |
RabbitMQClient.queueBind(String queue,
String exchange,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Bind a queue to an exchange
|
void |
RabbitMQClient.queueDeclare(String queue,
boolean durable,
boolean exclusive,
boolean autoDelete,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeclareOk>> resultHandler)
Declare a queue
|
void |
RabbitMQClient.queueDeclare(String queue,
boolean durable,
boolean exclusive,
boolean autoDelete,
JsonObject config,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeclareOk>> resultHandler)
Declare a queue with config options
|
void |
RabbitMQClient.queueDeclareAuto(Handler<AsyncResult<JsonObject>> resultHandler)
Actively declare a server-named exclusive, autodelete, non-durable queue.
|
void |
RabbitMQClient.queueDelete(String queue,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeleteOk>> resultHandler)
Delete a queue, without regard for whether it is in use or has messages on it
|
void |
RabbitMQClient.queueDeleteIf(String queue,
boolean ifUnused,
boolean ifEmpty,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeleteOk>> resultHandler)
Delete a queue
|
void |
RabbitMQClient.queueUnbind(String queue,
String exchange,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Unbind a queue from an exchange
|
void |
RabbitMQClient.queueUnbind(String queue,
String exchange,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Unbind a queue from an exchange
|
void |
RabbitMQClient.restartConnect(int attempts,
Handler<AsyncResult<Void>> resultHandler)
restart the rabbitMQ connect.
|
void |
RabbitMQClient.start(Handler<AsyncResult<Void>> resultHandler)
Start the rabbitMQ client.
|
void |
RabbitMQPublisher.start(Handler<AsyncResult<Void>> resultHandler)
Start the rabbitMQ publisher.
|
void |
RabbitMQClient.stop(Handler<AsyncResult<Void>> resultHandler)
Stop the rabbitMQ client.
|
void |
RabbitMQPublisher.stop(Handler<AsyncResult<Void>> resultHandler)
Stop the rabbitMQ publisher.
|
void |
RabbitMQClient.waitForConfirms(Handler<AsyncResult<Void>> resultHandler)
Wait until all messages published since the last call have been either ack'd or nack'd by the broker.
|
void |
RabbitMQClient.waitForConfirms(long timeout,
Handler<AsyncResult<Void>> resultHandler)
Wait until all messages published since the last call have been either ack'd or nack'd by the broker; or until timeout elapses.
|
| Modifier and Type | Method and Description |
|---|---|
RedisAPI |
RedisAPI.acl(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for Access List Control commands.
|
RedisAPI |
RedisAPI.append(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Append a value to a key.
|
RedisAPI |
RedisAPI.asking(Handler<AsyncResult<Response>> handler)
Sent by cluster clients after an -ASK redirect.
|
RedisAPI |
RedisAPI.auth(List<String> args,
Handler<AsyncResult<Response>> handler)
Authenticate to the server.
|
Redis |
Redis.batch(List<Request> commands,
Handler<AsyncResult<List<Response>>> onSend)
Sends a list of commands in a single IO operation, this prevents any inter twinning to happen from other
client users.
|
RedisConnection |
RedisConnection.batch(List<Request> commands,
Handler<AsyncResult<List<Response>>> onSend)
Sends a list of commands in a single IO operation, this prevents any inter twinning to happen from other
client users.
|
RedisAPI |
RedisAPI.bfAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.ADD.
|
RedisAPI |
RedisAPI.bfCard(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.CARD.
|
RedisAPI |
RedisAPI.bfDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.DEBUG.
|
RedisAPI |
RedisAPI.bfExists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.EXISTS.
|
RedisAPI |
RedisAPI.bfInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.INFO.
|
RedisAPI |
RedisAPI.bfInsert(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.INSERT.
|
RedisAPI |
RedisAPI.bfLoadchunk(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.LOADCHUNK.
|
RedisAPI |
RedisAPI.bfMadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.MADD.
|
RedisAPI |
RedisAPI.bfMexists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.MEXISTS.
|
RedisAPI |
RedisAPI.bfReserve(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.RESERVE.
|
RedisAPI |
RedisAPI.bfScandump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.SCANDUMP.
|
RedisAPI |
RedisAPI.bgrewriteaof(Handler<AsyncResult<Response>> handler)
Asynchronously rewrite the append-only file.
|
RedisAPI |
RedisAPI.bgsave(List<String> args,
Handler<AsyncResult<Response>> handler)
Asynchronously save the dataset to disk.
|
RedisAPI |
RedisAPI.bitcount(List<String> args,
Handler<AsyncResult<Response>> handler)
Count set bits in a string.
|
RedisAPI |
RedisAPI.bitfield(List<String> args,
Handler<AsyncResult<Response>> handler)
Perform arbitrary bitfield integer operations on strings.
|
RedisAPI |
RedisAPI.bitfieldRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Perform arbitrary bitfield integer operations on strings.
|
RedisAPI |
RedisAPI.bitop(List<String> args,
Handler<AsyncResult<Response>> handler)
Perform bitwise operations between strings.
|
RedisAPI |
RedisAPI.bitpos(List<String> args,
Handler<AsyncResult<Response>> handler)
Find first bit set or clear in a string.
|
RedisAPI |
RedisAPI.blmove(String arg0,
String arg1,
String arg2,
String arg3,
String arg4,
Handler<AsyncResult<Response>> handler)
Pop an element from a list, push it to another list and return it; or block until one is available.
|
RedisAPI |
RedisAPI.blmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Pop elements from a list, or block until one is available.
|
RedisAPI |
RedisAPI.blpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the first element in a list, or block until one is available.
|
RedisAPI |
RedisAPI.brpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the last element in a list, or block until one is available.
|
RedisAPI |
RedisAPI.brpoplpush(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Pop an element from a list, push it to another list and return it; or block until one is available.
|
RedisAPI |
RedisAPI.bzmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with scores in a sorted set or block until one is available.
|
RedisAPI |
RedisAPI.bzpopmax(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return the member with the highest score from one or more sorted sets, or block until one is available.
|
RedisAPI |
RedisAPI.bzpopmin(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return the member with the lowest score from one or more sorted sets, or block until one is available.
|
RedisAPI |
RedisAPI.cfAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.ADD.
|
RedisAPI |
RedisAPI.cfAddnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.ADDNX.
|
RedisAPI |
RedisAPI.cfCompact(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.COMPACT.
|
RedisAPI |
RedisAPI.cfCount(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.COUNT.
|
RedisAPI |
RedisAPI.cfDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.DEBUG.
|
RedisAPI |
RedisAPI.cfDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.DEL.
|
RedisAPI |
RedisAPI.cfExists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.EXISTS.
|
RedisAPI |
RedisAPI.cfInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.INFO.
|
RedisAPI |
RedisAPI.cfInsert(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.INSERT.
|
RedisAPI |
RedisAPI.cfInsertnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.INSERTNX.
|
RedisAPI |
RedisAPI.cfLoadchunk(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.LOADCHUNK.
|
RedisAPI |
RedisAPI.cfMexists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.MEXISTS.
|
RedisAPI |
RedisAPI.cfReserve(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.RESERVE.
|
RedisAPI |
RedisAPI.cfScandump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.SCANDUMP.
|
RedisAPI |
RedisAPI.client(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for client connection commands.
|
RedisConnection |
RedisConnection.close(Handler<AsyncResult<Void>> onClose)
Closes the connection or returns to the pool.
|
RedisAPI |
RedisAPI.cluster(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for cluster commands.
|
RedisAPI |
RedisAPI.cmsIncrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INCRBY.
|
RedisAPI |
RedisAPI.cmsInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INFO.
|
RedisAPI |
RedisAPI.cmsInitbydim(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INITBYDIM.
|
RedisAPI |
RedisAPI.cmsInitbyprob(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INITBYPROB.
|
RedisAPI |
RedisAPI.cmsMerge(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.MERGE.
|
RedisAPI |
RedisAPI.cmsQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.QUERY.
|
RedisAPI |
RedisAPI.command(List<String> args,
Handler<AsyncResult<Response>> handler)
Get array of Redis command details.
|
RedisAPI |
RedisAPI.config(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for server configuration commands.
|
Redis |
Redis.connect(Handler<AsyncResult<RedisConnection>> handler)
Connects to the redis server.
|
RedisAPI |
RedisAPI.copy(List<String> args,
Handler<AsyncResult<Response>> handler)
Copy a key.
|
RedisAPI |
RedisAPI.dbsize(Handler<AsyncResult<Response>> handler)
Return the number of keys in the selected database.
|
RedisAPI |
RedisAPI.debug(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for debugging commands.
|
RedisAPI |
RedisAPI.decr(String arg0,
Handler<AsyncResult<Response>> handler)
Decrement the integer value of a key by one.
|
RedisAPI |
RedisAPI.decrby(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Decrement the integer value of a key by the given number.
|
RedisAPI |
RedisAPI.del(List<String> args,
Handler<AsyncResult<Response>> handler)
Delete a key.
|
RedisAPI |
RedisAPI.discard(Handler<AsyncResult<Response>> handler)
Discard all commands issued after MULTI.
|
RedisAPI |
RedisAPI.dump(String arg0,
Handler<AsyncResult<Response>> handler)
Return a serialized version of the value stored at the specified key.
|
RedisAPI |
RedisAPI.echo(String arg0,
Handler<AsyncResult<Response>> handler)
Echo the given string.
|
RedisAPI |
RedisAPI.eval(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a Lua script server side.
|
RedisAPI |
RedisAPI.evalRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a read-only Lua script server side.
|
RedisAPI |
RedisAPI.evalsha(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a Lua script server side.
|
RedisAPI |
RedisAPI.evalshaRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a read-only Lua script server side.
|
RedisAPI |
RedisAPI.exec(Handler<AsyncResult<Response>> handler)
Execute all commands issued after MULTI.
|
RedisAPI |
RedisAPI.exists(List<String> args,
Handler<AsyncResult<Response>> handler)
Determine if a key exists.
|
RedisAPI |
RedisAPI.expire(List<String> args,
Handler<AsyncResult<Response>> handler)
Set a key's time to live in seconds.
|
RedisAPI |
RedisAPI.expireat(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the expiration for a key as a UNIX timestamp.
|
RedisAPI |
RedisAPI.expiretime(String arg0,
Handler<AsyncResult<Response>> handler)
Get the expiration Unix timestamp for a key.
|
RedisAPI |
RedisAPI.failover(List<String> args,
Handler<AsyncResult<Response>> handler)
Start a coordinated failover between this server and one of its replicas.
|
RedisAPI |
RedisAPI.fcall(List<String> args,
Handler<AsyncResult<Response>> handler)
Invoke a function.
|
RedisAPI |
RedisAPI.fcallRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Invoke a read-only function.
|
RedisAPI |
RedisAPI.flushall(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove all keys from all databases.
|
RedisAPI |
RedisAPI.flushdb(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove all keys from the current database.
|
RedisAPI |
RedisAPI.ftAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ADD.
|
RedisAPI |
RedisAPI.ftAggregate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.AGGREGATE.
|
RedisAPI |
RedisAPI.ftAliasadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALIASADD.
|
RedisAPI |
RedisAPI.ftAliasaddifnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._ALIASADDIFNX.
|
RedisAPI |
RedisAPI.ftAliasdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALIASDEL.
|
RedisAPI |
RedisAPI.ftAliasdelifx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._ALIASDELIFX.
|
RedisAPI |
RedisAPI.ftAliasupdate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALIASUPDATE.
|
RedisAPI |
RedisAPI.ftAlter(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALTER.
|
RedisAPI |
RedisAPI.ftAlterifnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._ALTERIFNX.
|
RedisAPI |
RedisAPI.ftConfig(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.CONFIG.
|
RedisAPI |
RedisAPI.ftCreate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.CREATE.
|
RedisAPI |
RedisAPI.ftCreateifnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._CREATEIFNX.
|
RedisAPI |
RedisAPI.ftCursor(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.CURSOR.
|
RedisAPI |
RedisAPI.ftDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DEBUG.
|
RedisAPI |
RedisAPI.ftDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DEL.
|
RedisAPI |
RedisAPI.ftDictadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DICTADD.
|
RedisAPI |
RedisAPI.ftDictdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DICTDEL.
|
RedisAPI |
RedisAPI.ftDictdump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DICTDUMP.
|
RedisAPI |
RedisAPI.ftDrop(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DROP.
|
RedisAPI |
RedisAPI.ftDropifx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._DROPIFX.
|
RedisAPI |
RedisAPI.ftDropindex(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DROPINDEX.
|
RedisAPI |
RedisAPI.ftDropindexifx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._DROPINDEXIFX.
|
RedisAPI |
RedisAPI.ftExplain(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.EXPLAIN.
|
RedisAPI |
RedisAPI.ftExplaincli(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.EXPLAINCLI.
|
RedisAPI |
RedisAPI.ftGet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.GET.
|
RedisAPI |
RedisAPI.ftInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.INFO.
|
RedisAPI |
RedisAPI.ftList(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._LIST.
|
RedisAPI |
RedisAPI.ftMget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.MGET.
|
RedisAPI |
RedisAPI.ftProfile(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.PROFILE.
|
RedisAPI |
RedisAPI.ftSafeadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SAFEADD.
|
RedisAPI |
RedisAPI.ftSearch(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SEARCH.
|
RedisAPI |
RedisAPI.ftSpellcheck(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SPELLCHECK.
|
RedisAPI |
RedisAPI.ftSugadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGADD.
|
RedisAPI |
RedisAPI.ftSugdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGDEL.
|
RedisAPI |
RedisAPI.ftSugget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGGET.
|
RedisAPI |
RedisAPI.ftSuglen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGLEN.
|
RedisAPI |
RedisAPI.ftSynadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SYNADD.
|
RedisAPI |
RedisAPI.ftSyndump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SYNDUMP.
|
RedisAPI |
RedisAPI.ftSynupdate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SYNUPDATE.
|
RedisAPI |
RedisAPI.ftTagvals(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.TAGVALS.
|
RedisAPI |
RedisAPI.function(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for function commands.
|
RedisAPI |
RedisAPI.geoadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Add one or more geospatial items in the geospatial index represented using a sorted set.
|
RedisAPI |
RedisAPI.geodist(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns the distance between two members of a geospatial index.
|
RedisAPI |
RedisAPI.geohash(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns members of a geospatial index as standard geohash strings.
|
RedisAPI |
RedisAPI.geopos(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns longitude and latitude of members of a geospatial index.
|
RedisAPI |
RedisAPI.georadius(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members matching a given maximum distance from a point.
|
RedisAPI |
RedisAPI.georadiusbymember(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members matching a given maximum distance from a member.
|
RedisAPI |
RedisAPI.georadiusbymemberRo(List<String> args,
Handler<AsyncResult<Response>> handler)
A read-only variant for GEORADIUSBYMEMBER.
|
RedisAPI |
RedisAPI.georadiusRo(List<String> args,
Handler<AsyncResult<Response>> handler)
A read-only variant for GEORADIUS.
|
RedisAPI |
RedisAPI.geosearch(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members inside an area of a box or a circle.
|
RedisAPI |
RedisAPI.geosearchstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members inside an area of a box or a circle, and store the result in another key.
|
RedisAPI |
RedisAPI.get(String arg0,
Handler<AsyncResult<Response>> handler)
Get the value of a key.
|
RedisAPI |
RedisAPI.getbit(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Returns the bit value at offset in the string value stored at key.
|
RedisAPI |
RedisAPI.getdel(String arg0,
Handler<AsyncResult<Response>> handler)
Get the value of a key and delete the key.
|
RedisAPI |
RedisAPI.getex(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the value of a key and optionally set its expiration.
|
RedisAPI |
RedisAPI.getrange(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Get a substring of the string stored at a key.
|
RedisAPI |
RedisAPI.getset(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Set the string value of a key and return its old value.
|
RedisAPI |
RedisAPI.graphBulk(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.BULK.
|
RedisAPI |
RedisAPI.graphConfig(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.CONFIG.
|
RedisAPI |
RedisAPI.graphDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.DEBUG.
|
RedisAPI |
RedisAPI.graphDelete(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.DELETE.
|
RedisAPI |
RedisAPI.graphExplain(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.EXPLAIN.
|
RedisAPI |
RedisAPI.graphList(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.LIST.
|
RedisAPI |
RedisAPI.graphProfile(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.PROFILE.
|
RedisAPI |
RedisAPI.graphQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.QUERY.
|
RedisAPI |
RedisAPI.graphRoQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.RO_QUERY.
|
RedisAPI |
RedisAPI.graphSlowlog(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.SLOWLOG.
|
RedisAPI |
RedisAPI.hdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Delete one or more hash fields.
|
RedisAPI |
RedisAPI.hello(List<String> args,
Handler<AsyncResult<Response>> handler)
Handshake with Redis.
|
RedisAPI |
RedisAPI.hexists(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine if a hash field exists.
|
RedisAPI |
RedisAPI.hget(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get the value of a hash field.
|
RedisAPI |
RedisAPI.hgetall(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the fields and values in a hash.
|
RedisAPI |
RedisAPI.hincrby(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Increment the integer value of a hash field by the given number.
|
RedisAPI |
RedisAPI.hincrbyfloat(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Increment the float value of a hash field by the given amount.
|
RedisAPI |
RedisAPI.hkeys(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the fields in a hash.
|
RedisAPI |
RedisAPI.hlen(String arg0,
Handler<AsyncResult<Response>> handler)
Get the number of fields in a hash.
|
RedisAPI |
RedisAPI.hmget(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the values of all the given hash fields.
|
RedisAPI |
RedisAPI.hmset(List<String> args,
Handler<AsyncResult<Response>> handler)
Set multiple hash fields to multiple values.
|
RedisAPI |
RedisAPI.hrandfield(List<String> args,
Handler<AsyncResult<Response>> handler)
Get one or multiple random fields from a hash.
|
RedisAPI |
RedisAPI.hscan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate hash fields and associated values.
|
RedisAPI |
RedisAPI.hset(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the string value of a hash field.
|
RedisAPI |
RedisAPI.hsetnx(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value of a hash field, only if the field does not exist.
|
RedisAPI |
RedisAPI.hstrlen(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get the length of the value of a hash field.
|
RedisAPI |
RedisAPI.hvals(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the values in a hash.
|
RedisAPI |
RedisAPI.incr(String arg0,
Handler<AsyncResult<Response>> handler)
Increment the integer value of a key by one.
|
RedisAPI |
RedisAPI.incrby(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Increment the integer value of a key by the given amount.
|
RedisAPI |
RedisAPI.incrbyfloat(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Increment the float value of a key by the given amount.
|
RedisAPI |
RedisAPI.info(List<String> args,
Handler<AsyncResult<Response>> handler)
Get information and statistics about the server.
|
RedisAPI |
RedisAPI.jsonArrappend(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRAPPEND.
|
RedisAPI |
RedisAPI.jsonArrindex(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRINDEX.
|
RedisAPI |
RedisAPI.jsonArrinsert(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRINSERT.
|
RedisAPI |
RedisAPI.jsonArrlen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRLEN.
|
RedisAPI |
RedisAPI.jsonArrpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRPOP.
|
RedisAPI |
RedisAPI.jsonArrtrim(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRTRIM.
|
RedisAPI |
RedisAPI.jsonClear(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.CLEAR.
|
RedisAPI |
RedisAPI.jsonDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.DEBUG.
|
RedisAPI |
RedisAPI.jsonDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.DEL.
|
RedisAPI |
RedisAPI.jsonForget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.FORGET.
|
RedisAPI |
RedisAPI.jsonGet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.GET.
|
RedisAPI |
RedisAPI.jsonMget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.MGET.
|
RedisAPI |
RedisAPI.jsonNumincrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.NUMINCRBY.
|
RedisAPI |
RedisAPI.jsonNummultby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.NUMMULTBY.
|
RedisAPI |
RedisAPI.jsonNumpowby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.NUMPOWBY.
|
RedisAPI |
RedisAPI.jsonObjkeys(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.OBJKEYS.
|
RedisAPI |
RedisAPI.jsonObjlen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.OBJLEN.
|
RedisAPI |
RedisAPI.jsonResp(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.RESP.
|
RedisAPI |
RedisAPI.jsonSet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.SET.
|
RedisAPI |
RedisAPI.jsonStrappend(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.STRAPPEND.
|
RedisAPI |
RedisAPI.jsonStrlen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.STRLEN.
|
RedisAPI |
RedisAPI.jsonToggle(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.TOGGLE.
|
RedisAPI |
RedisAPI.jsonType(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.TYPE.
|
RedisAPI |
RedisAPI.keys(String arg0,
Handler<AsyncResult<Response>> handler)
Find all keys matching the given pattern.
|
RedisAPI |
RedisAPI.lastsave(Handler<AsyncResult<Response>> handler)
Get the UNIX time stamp of the last successful save to disk.
|
RedisAPI |
RedisAPI.latency(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for latency diagnostics commands.
|
RedisAPI |
RedisAPI.lcs(List<String> args,
Handler<AsyncResult<Response>> handler)
Find longest common substring.
|
RedisAPI |
RedisAPI.lindex(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get an element from a list by its index.
|
RedisAPI |
RedisAPI.linsert(String arg0,
String arg1,
String arg2,
String arg3,
Handler<AsyncResult<Response>> handler)
Insert an element before or after another element in a list.
|
RedisAPI |
RedisAPI.llen(String arg0,
Handler<AsyncResult<Response>> handler)
Get the length of a list.
|
RedisAPI |
RedisAPI.lmove(String arg0,
String arg1,
String arg2,
String arg3,
Handler<AsyncResult<Response>> handler)
Pop an element from a list, push it to another list and return it.
|
RedisAPI |
RedisAPI.lmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Pop elements from a list.
|
RedisAPI |
RedisAPI.lolwut(List<String> args,
Handler<AsyncResult<Response>> handler)
Display some computer art and the Redis version.
|
RedisAPI |
RedisAPI.lpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the first elements in a list.
|
RedisAPI |
RedisAPI.lpos(List<String> args,
Handler<AsyncResult<Response>> handler)
Return the index of matching elements on a list.
|
RedisAPI |
RedisAPI.lpush(List<String> args,
Handler<AsyncResult<Response>> handler)
Prepend one or multiple elements to a list.
|
RedisAPI |
RedisAPI.lpushx(List<String> args,
Handler<AsyncResult<Response>> handler)
Prepend an element to a list, only if the list exists.
|
RedisAPI |
RedisAPI.lrange(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Get a range of elements from a list.
|
RedisAPI |
RedisAPI.lrem(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove elements from a list.
|
RedisAPI |
RedisAPI.lset(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value of an element in a list by its index.
|
RedisAPI |
RedisAPI.ltrim(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Trim a list to the specified range.
|
RedisAPI |
RedisAPI.memory(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for memory diagnostics commands.
|
RedisAPI |
RedisAPI.mget(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the values of all the given keys.
|
RedisAPI |
RedisAPI.migrate(List<String> args,
Handler<AsyncResult<Response>> handler)
Atomically transfer a key from a Redis instance to another one.
|
RedisAPI |
RedisAPI.module(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for module commands.
|
RedisAPI |
RedisAPI.monitor(Handler<AsyncResult<Response>> handler)
Listen for all requests received by the server in real time.
|
RedisAPI |
RedisAPI.move(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Move a key to another database.
|
RedisAPI |
RedisAPI.mset(List<String> args,
Handler<AsyncResult<Response>> handler)
Set multiple keys to multiple values.
|
RedisAPI |
RedisAPI.msetnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Set multiple keys to multiple values, only if none of the keys exist.
|
RedisAPI |
RedisAPI.multi(Handler<AsyncResult<Response>> handler)
Mark the start of a transaction block.
|
RedisAPI |
RedisAPI.object(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for object introspection commands.
|
RedisAPI |
RedisAPI.persist(String arg0,
Handler<AsyncResult<Response>> handler)
Remove the expiration from a key.
|
RedisAPI |
RedisAPI.pexpire(List<String> args,
Handler<AsyncResult<Response>> handler)
Set a key's time to live in milliseconds.
|
RedisAPI |
RedisAPI.pexpireat(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the expiration for a key as a UNIX timestamp specified in milliseconds.
|
RedisAPI |
RedisAPI.pexpiretime(String arg0,
Handler<AsyncResult<Response>> handler)
Get the expiration Unix timestamp for a key in milliseconds.
|
RedisAPI |
RedisAPI.pfadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Adds the specified elements to the specified HyperLogLog.
|
RedisAPI |
RedisAPI.pfcount(List<String> args,
Handler<AsyncResult<Response>> handler)
Return the approximated cardinality of the set(s) observed by the HyperLogLog at key(s).
|
RedisAPI |
RedisAPI.pfdebug(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Internal commands for debugging HyperLogLog values.
|
RedisAPI |
RedisAPI.pfmerge(List<String> args,
Handler<AsyncResult<Response>> handler)
Merge N different HyperLogLogs into a single one.
|
RedisAPI |
RedisAPI.pfselftest(Handler<AsyncResult<Response>> handler)
An internal command for testing HyperLogLog values.
|
RedisAPI |
RedisAPI.ping(List<String> args,
Handler<AsyncResult<Response>> handler)
Ping the server.
|
void |
RedisConnection.pipeTo(WriteStream<Response> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
RedisAPI |
RedisAPI.psetex(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value and expiration in milliseconds of a key.
|
RedisAPI |
RedisAPI.psubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Listen for messages published to channels matching the given patterns.
|
RedisAPI |
RedisAPI.psync(List<String> args,
Handler<AsyncResult<Response>> handler)
Internal command used for replication.
|
RedisAPI |
RedisAPI.pttl(String arg0,
Handler<AsyncResult<Response>> handler)
Get the time to live for a key in milliseconds.
|
RedisAPI |
RedisAPI.publish(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Post a message to a channel.
|
RedisAPI |
RedisAPI.pubsub(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for Pub/Sub commands.
|
RedisAPI |
RedisAPI.punsubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Stop listening for messages posted to channels matching the given patterns.
|
RedisAPI |
RedisAPI.quit(List<String> args,
Handler<AsyncResult<Response>> handler)
Close the connection.
|
RedisAPI |
RedisAPI.randomkey(Handler<AsyncResult<Response>> handler)
Return a random key from the keyspace.
|
RedisAPI |
RedisAPI.readonly(Handler<AsyncResult<Response>> handler)
Enables read queries for a connection to a cluster replica node.
|
RedisAPI |
RedisAPI.readwrite(Handler<AsyncResult<Response>> handler)
Disables read queries for a connection to a cluster replica node.
|
RedisAPI |
RedisAPI.rename(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Rename a key.
|
RedisAPI |
RedisAPI.renamenx(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Rename a key, only if the new key does not exist.
|
RedisAPI |
RedisAPI.replconf(List<String> args,
Handler<AsyncResult<Response>> handler)
An internal command for configuring the replication stream.
|
RedisAPI |
RedisAPI.replicaof(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Make the server a replica of another instance, or promote it as master.
|
RedisAPI |
RedisAPI.reset(Handler<AsyncResult<Response>> handler)
Reset the connection.
|
RedisAPI |
RedisAPI.restore(List<String> args,
Handler<AsyncResult<Response>> handler)
Create a key using the provided serialized value, previously obtained using DUMP.
|
RedisAPI |
RedisAPI.restoreAsking(List<String> args,
Handler<AsyncResult<Response>> handler)
An internal command for migrating keys in a cluster.
|
RedisAPI |
RedisAPI.role(Handler<AsyncResult<Response>> handler)
Return the role of the instance in the context of replication.
|
RedisAPI |
RedisAPI.rpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the last elements in a list.
|
RedisAPI |
RedisAPI.rpoplpush(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Remove the last element in a list, prepend it to another list and return it.
|
RedisAPI |
RedisAPI.rpush(List<String> args,
Handler<AsyncResult<Response>> handler)
Append one or multiple elements to a list.
|
RedisAPI |
RedisAPI.rpushx(List<String> args,
Handler<AsyncResult<Response>> handler)
Append an element to a list, only if the list exists.
|
RedisAPI |
RedisAPI.sadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Add one or more members to a set.
|
RedisAPI |
RedisAPI.save(Handler<AsyncResult<Response>> handler)
Synchronously save the dataset to disk.
|
RedisAPI |
RedisAPI.scan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate the keys space.
|
RedisAPI |
RedisAPI.scard(String arg0,
Handler<AsyncResult<Response>> handler)
Get the number of members in a set.
|
RedisAPI |
RedisAPI.script(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for Lua scripts management commands.
|
RedisAPI |
RedisAPI.sdiff(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sets.
|
RedisAPI |
RedisAPI.sdiffstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sets and store the resulting set in a key.
|
RedisAPI |
RedisAPI.select(String arg0,
Handler<AsyncResult<Response>> handler)
Change the selected database for the current connection.
|
Redis |
Redis.send(Request command,
Handler<AsyncResult<Response>> onSend)
Send the given command to the redis server or cluster.
|
RedisConnection |
RedisConnection.send(Request command,
Handler<AsyncResult<Response>> onSend)
Send the given command to the redis server or cluster.
|
RedisAPI |
RedisAPI.set(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the string value of a key.
|
RedisAPI |
RedisAPI.setbit(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Sets or clears the bit at offset in the string value stored at key.
|
RedisAPI |
RedisAPI.setex(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value and expiration of a key.
|
RedisAPI |
RedisAPI.setnx(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Set the value of a key, only if the key does not exist.
|
RedisAPI |
RedisAPI.setrange(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Overwrite part of a string at key starting at the specified offset.
|
RedisAPI |
RedisAPI.shutdown(List<String> args,
Handler<AsyncResult<Response>> handler)
Synchronously save the dataset to disk and then shut down the server.
|
RedisAPI |
RedisAPI.sinter(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sets.
|
RedisAPI |
RedisAPI.sintercard(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sets and return the cardinality of the result.
|
RedisAPI |
RedisAPI.sinterstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sets and store the resulting set in a key.
|
RedisAPI |
RedisAPI.sismember(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine if a given value is a member of a set.
|
RedisAPI |
RedisAPI.slaveof(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Make the server a replica of another instance, or promote it as master.
|
RedisAPI |
RedisAPI.slowlog(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for slow log commands.
|
RedisAPI |
RedisAPI.smembers(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the members in a set.
|
RedisAPI |
RedisAPI.smismember(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns the membership associated with the given elements for a set.
|
RedisAPI |
RedisAPI.smove(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Move a member from one set to another.
|
RedisAPI |
RedisAPI.sort(List<String> args,
Handler<AsyncResult<Response>> handler)
Sort the elements in a list, set or sorted set.
|
RedisAPI |
RedisAPI.sortRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Sort the elements in a list, set or sorted set.
|
RedisAPI |
RedisAPI.spop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return one or multiple random members from a set.
|
RedisAPI |
RedisAPI.spublish(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Post a message to a shard channel.
|
RedisAPI |
RedisAPI.srandmember(List<String> args,
Handler<AsyncResult<Response>> handler)
Get one or multiple random members from a set.
|
RedisAPI |
RedisAPI.srem(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove one or more members from a set.
|
RedisAPI |
RedisAPI.sscan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate Set elements.
|
RedisAPI |
RedisAPI.ssubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Listen for messages published to the given shard channels.
|
RedisAPI |
RedisAPI.strlen(String arg0,
Handler<AsyncResult<Response>> handler)
Get the length of the value stored in a key.
|
RedisAPI |
RedisAPI.subscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Listen for messages published to the given channels.
|
RedisAPI |
RedisAPI.substr(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Get a substring of the string stored at a key.
|
RedisAPI |
RedisAPI.sunion(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sets.
|
RedisAPI |
RedisAPI.sunionstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sets and store the resulting set in a key.
|
RedisAPI |
RedisAPI.sunsubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Stop listening for messages posted to the given shard channels.
|
RedisAPI |
RedisAPI.swapdb(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Swaps two Redis databases.
|
RedisAPI |
RedisAPI.sync(Handler<AsyncResult<Response>> handler)
Internal command used for replication.
|
RedisAPI |
RedisAPI.tdigestAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.ADD.
|
RedisAPI |
RedisAPI.tdigestByrank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.BYRANK.
|
RedisAPI |
RedisAPI.tdigestByrevrank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.BYREVRANK.
|
RedisAPI |
RedisAPI.tdigestCdf(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.CDF.
|
RedisAPI |
RedisAPI.tdigestCreate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.CREATE.
|
RedisAPI |
RedisAPI.tdigestInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.INFO.
|
RedisAPI |
RedisAPI.tdigestMax(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.MAX.
|
RedisAPI |
RedisAPI.tdigestMerge(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.MERGE.
|
RedisAPI |
RedisAPI.tdigestMin(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.MIN.
|
RedisAPI |
RedisAPI.tdigestQuantile(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.QUANTILE.
|
RedisAPI |
RedisAPI.tdigestRank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.RANK.
|
RedisAPI |
RedisAPI.tdigestReset(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.RESET.
|
RedisAPI |
RedisAPI.tdigestRevrank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.REVRANK.
|
RedisAPI |
RedisAPI.tdigestTrimmedMean(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.TRIMMED_MEAN.
|
RedisAPI |
RedisAPI.time(Handler<AsyncResult<Response>> handler)
Return the current server time.
|
RedisAPI |
RedisAPI.timeseriesClusterset(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.CLUSTERSET.
|
RedisAPI |
RedisAPI.timeseriesClustersetfromshard(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.CLUSTERSETFROMSHARD.
|
RedisAPI |
RedisAPI.timeseriesHello(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.HELLO.
|
RedisAPI |
RedisAPI.timeseriesInfocluster(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.INFOCLUSTER.
|
RedisAPI |
RedisAPI.timeseriesInnercommunication(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.INNERCOMMUNICATION.
|
RedisAPI |
RedisAPI.timeseriesNetworktest(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.NETWORKTEST.
|
RedisAPI |
RedisAPI.timeseriesRefreshcluster(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.REFRESHCLUSTER.
|
RedisAPI |
RedisAPI.topkAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.ADD.
|
RedisAPI |
RedisAPI.topkCount(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.COUNT.
|
RedisAPI |
RedisAPI.topkIncrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.INCRBY.
|
RedisAPI |
RedisAPI.topkInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.INFO.
|
RedisAPI |
RedisAPI.topkList(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.LIST.
|
RedisAPI |
RedisAPI.topkQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.QUERY.
|
RedisAPI |
RedisAPI.topkReserve(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.RESERVE.
|
RedisAPI |
RedisAPI.touch(List<String> args,
Handler<AsyncResult<Response>> handler)
Alters the last access time of a key(s).
|
RedisAPI |
RedisAPI.tsAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.ADD.
|
RedisAPI |
RedisAPI.tsAlter(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.ALTER.
|
RedisAPI |
RedisAPI.tsCreate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.CREATE.
|
RedisAPI |
RedisAPI.tsCreaterule(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.CREATERULE.
|
RedisAPI |
RedisAPI.tsDecrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.DECRBY.
|
RedisAPI |
RedisAPI.tsDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.DEL.
|
RedisAPI |
RedisAPI.tsDeleterule(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.DELETERULE.
|
RedisAPI |
RedisAPI.tsGet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.GET.
|
RedisAPI |
RedisAPI.tsIncrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.INCRBY.
|
RedisAPI |
RedisAPI.tsInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.INFO.
|
RedisAPI |
RedisAPI.tsMadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MADD.
|
RedisAPI |
RedisAPI.tsMget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MGET.
|
RedisAPI |
RedisAPI.tsMrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MRANGE.
|
RedisAPI |
RedisAPI.tsMrevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MREVRANGE.
|
RedisAPI |
RedisAPI.tsQueryindex(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.QUERYINDEX.
|
RedisAPI |
RedisAPI.tsRange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.RANGE.
|
RedisAPI |
RedisAPI.tsRevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.REVRANGE.
|
RedisAPI |
RedisAPI.ttl(String arg0,
Handler<AsyncResult<Response>> handler)
Get the time to live for a key in seconds.
|
RedisAPI |
RedisAPI.type(String arg0,
Handler<AsyncResult<Response>> handler)
Determine the type stored at key.
|
RedisAPI |
RedisAPI.unlink(List<String> args,
Handler<AsyncResult<Response>> handler)
Delete a key asynchronously in another thread.
|
RedisAPI |
RedisAPI.unsubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Stop listening for messages posted to the given channels.
|
RedisAPI |
RedisAPI.unwatch(Handler<AsyncResult<Response>> handler)
Forget about all watched keys.
|
RedisAPI |
RedisAPI.wait(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Wait for the synchronous replication of all the write commands sent in the context of the current connection.
|
RedisAPI |
RedisAPI.watch(List<String> args,
Handler<AsyncResult<Response>> handler)
Watch the given keys to determine execution of the MULTI/EXEC block.
|
RedisAPI |
RedisAPI.xack(List<String> args,
Handler<AsyncResult<Response>> handler)
Marks a pending message as correctly processed, effectively removing it from the pending entries list of the consumer group.
|
RedisAPI |
RedisAPI.xadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Appends a new entry to a stream.
|
RedisAPI |
RedisAPI.xautoclaim(List<String> args,
Handler<AsyncResult<Response>> handler)
Changes (or acquires) ownership of messages in a consumer group, as if the messages were delivered to the specified consumer.
|
RedisAPI |
RedisAPI.xclaim(List<String> args,
Handler<AsyncResult<Response>> handler)
Changes (or acquires) ownership of a message in a consumer group, as if the message was delivered to the specified consumer.
|
RedisAPI |
RedisAPI.xdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Removes the specified entries from the stream.
|
RedisAPI |
RedisAPI.xgroup(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for consumer groups commands.
|
RedisAPI |
RedisAPI.xinfo(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for stream introspection commands.
|
RedisAPI |
RedisAPI.xlen(String arg0,
Handler<AsyncResult<Response>> handler)
Return the number of entries in a stream.
|
RedisAPI |
RedisAPI.xpending(List<String> args,
Handler<AsyncResult<Response>> handler)
Return information and entries from a stream consumer group pending entries list, that are messages fetched but never acknowledged.
|
RedisAPI |
RedisAPI.xrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of elements in a stream, with IDs matching the specified IDs interval.
|
RedisAPI |
RedisAPI.xread(List<String> args,
Handler<AsyncResult<Response>> handler)
Return never seen elements in multiple streams, with IDs greater than the ones reported by the caller for each stream.
|
RedisAPI |
RedisAPI.xreadgroup(List<String> args,
Handler<AsyncResult<Response>> handler)
Return new entries from a stream using a consumer group, or access the history of the pending entries for a given consumer.
|
RedisAPI |
RedisAPI.xrevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of elements in a stream, with IDs matching the specified IDs interval, in reverse order (from greater to smaller IDs) compared to XRANGE.
|
RedisAPI |
RedisAPI.xsetid(List<String> args,
Handler<AsyncResult<Response>> handler)
An internal command for replicating stream values.
|
RedisAPI |
RedisAPI.xtrim(List<String> args,
Handler<AsyncResult<Response>> handler)
Trims the stream to (approximately if '~' is passed) a certain size.
|
RedisAPI |
RedisAPI.zadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Add one or more members to a sorted set, or update its score if it already exists.
|
RedisAPI |
RedisAPI.zcard(String arg0,
Handler<AsyncResult<Response>> handler)
Get the number of members in a sorted set.
|
RedisAPI |
RedisAPI.zcount(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Count the members in a sorted set with scores within the given values.
|
RedisAPI |
RedisAPI.zdiff(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sorted sets.
|
RedisAPI |
RedisAPI.zdiffstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sorted sets and store the resulting sorted set in a new key.
|
RedisAPI |
RedisAPI.zincrby(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Increment the score of a member in a sorted set.
|
RedisAPI |
RedisAPI.zinter(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sorted sets.
|
RedisAPI |
RedisAPI.zintercard(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sorted sets and return the cardinality of the result.
|
RedisAPI |
RedisAPI.zinterstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sorted sets and store the resulting sorted set in a new key.
|
RedisAPI |
RedisAPI.zlexcount(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Count the number of members in a sorted set between a given lexicographical range.
|
RedisAPI |
RedisAPI.zmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with scores in a sorted set.
|
RedisAPI |
RedisAPI.zmscore(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the score associated with the given members in a sorted set.
|
RedisAPI |
RedisAPI.zpopmax(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with the highest scores in a sorted set.
|
RedisAPI |
RedisAPI.zpopmin(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with the lowest scores in a sorted set.
|
RedisAPI |
RedisAPI.zrandmember(List<String> args,
Handler<AsyncResult<Response>> handler)
Get one or multiple random elements from a sorted set.
|
RedisAPI |
RedisAPI.zrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set.
|
RedisAPI |
RedisAPI.zrangebylex(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by lexicographical range.
|
RedisAPI |
RedisAPI.zrangebyscore(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by score.
|
RedisAPI |
RedisAPI.zrangestore(List<String> args,
Handler<AsyncResult<Response>> handler)
Store a range of members from sorted set into another key.
|
RedisAPI |
RedisAPI.zrank(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine the index of a member in a sorted set.
|
RedisAPI |
RedisAPI.zrem(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove one or more members from a sorted set.
|
RedisAPI |
RedisAPI.zremrangebylex(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove all members in a sorted set between the given lexicographical range.
|
RedisAPI |
RedisAPI.zremrangebyrank(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove all members in a sorted set within the given indexes.
|
RedisAPI |
RedisAPI.zremrangebyscore(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove all members in a sorted set within the given scores.
|
RedisAPI |
RedisAPI.zrevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by index, with scores ordered from high to low.
|
RedisAPI |
RedisAPI.zrevrangebylex(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by lexicographical range, ordered from higher to lower strings.
|
RedisAPI |
RedisAPI.zrevrangebyscore(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by score, with scores ordered from high to low.
|
RedisAPI |
RedisAPI.zrevrank(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine the index of a member in a sorted set, with scores ordered from high to low.
|
RedisAPI |
RedisAPI.zscan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate sorted sets elements and associated scores.
|
RedisAPI |
RedisAPI.zscore(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get the score associated with the given member in a sorted set.
|
RedisAPI |
RedisAPI.zunion(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sorted sets.
|
RedisAPI |
RedisAPI.zunionstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sorted sets and store the resulting sorted set in a new key.
|
| Modifier and Type | Method and Description |
|---|---|
void |
ServiceDiscovery.getRecord(java.util.function.Function<Record,Boolean> filter,
boolean includeOutOfService,
Handler<AsyncResult<Record>> resultHandler)
Lookups for a single record.
|
void |
ServiceDiscovery.getRecord(java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<Record>> resultHandler)
Lookups for a single record.
|
void |
ServiceDiscovery.getRecord(JsonObject filter,
Handler<AsyncResult<Record>> resultHandler)
Lookups for a single record.
|
void |
ServiceDiscovery.getRecord(String id,
Handler<AsyncResult<Record>> resultHandler)
Looks up for a single record by its registration
id. |
void |
ServiceDiscovery.getRecords(java.util.function.Function<Record,Boolean> filter,
boolean includeOutOfService,
Handler<AsyncResult<List<Record>>> resultHandler)
Lookups for a set of records.
|
void |
ServiceDiscovery.getRecords(java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<List<Record>>> resultHandler)
Lookups for a set of records.
|
void |
ServiceDiscovery.getRecords(JsonObject filter,
Handler<AsyncResult<List<Record>>> resultHandler)
Lookups for a set of records.
|
void |
ServiceDiscovery.publish(Record record,
Handler<AsyncResult<Record>> resultHandler)
Publishes a record.
|
ServiceDiscovery |
ServiceDiscovery.registerServiceExporter(ServiceExporter exporter,
JsonObject configuration,
Handler<AsyncResult<Void>> completionHandler)
Registers a discovery bridge.
|
ServiceDiscovery |
ServiceDiscovery.registerServiceImporter(ServiceImporter importer,
JsonObject configuration,
Handler<AsyncResult<Void>> completionHandler)
Registers a discovery service importer.
|
void |
ServiceDiscovery.unpublish(String id,
Handler<AsyncResult<Void>> resultHandler)
Un-publishes a record.
|
void |
ServiceDiscovery.update(Record record,
Handler<AsyncResult<Record>> resultHandler)
Updates the given record.
|
| Modifier and Type | Method and Description |
|---|---|
void |
ServicePublisher.publish(Record record,
Handler<AsyncResult<Record>> resultHandler)
Publishes a record.
|
void |
ServicePublisher.unpublish(String id,
Handler<AsyncResult<Void>> resultHandler)
Un-publishes a record.
|
void |
ServicePublisher.update(Record record,
Handler<AsyncResult<Record>> resultHandler)
Updates an existing record.
|
| Modifier and Type | Method and Description |
|---|---|
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject conf,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject conf,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static <T> void |
MessageSource.getConsumer(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<MessageConsumer<T>>> resultHandler)
Convenient method that looks for a message source and provides the configured .
|
static <T> void |
MessageSource.getConsumer(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<MessageConsumer<T>>> resultHandler)
Convenient method that looks for a message source and provides the configured .
|
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
MongoDataSource.getMongoClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<MongoClient>> resultHandler)
Convenient method that looks for a Mongo datasource source and provides the configured
MongoClient. |
static void |
MongoDataSource.getMongoClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<MongoClient>> resultHandler)
Convenient method that looks for a Mongo datasource source and provides the configured
MongoClient. |
static void |
MongoDataSource.getMongoClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<MongoClient>> resultHandler)
Convenient method that looks for a Mongo datasource source and provides the configured
MongoClient. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static <T> T |
EventBusService.getServiceProxy(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Class<T> clientClass,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxy(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Class<T> clientClass,
JsonObject conf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxyWithJsonFilter(ServiceDiscovery discovery,
JsonObject filter,
Class<T> clientClass,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxyWithJsonFilter(ServiceDiscovery discovery,
JsonObject filter,
Class<T> clientClass,
JsonObject conf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject conf,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject conf,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
| Modifier and Type | Method and Description |
|---|---|
void |
SqlConnection.begin(Handler<AsyncResult<Transaction>> handler)
Begin a transaction and returns a
Transaction for controlling and tracking
this transaction. |
void |
PreparedStatement.close(Handler<AsyncResult<Void>> completionHandler)
Like
PreparedStatement.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but notifies the completionHandler when it's closed. |
void |
SqlConnection.close(Handler<AsyncResult<Void>> handler)
Close the current connection after all the pending commands have been processed.
|
void |
Pool.close(Handler<AsyncResult<Void>> handler)
Close the pool and release the associated resources.
|
void |
RowStream.close(Handler<AsyncResult<Void>> completionHandler)
Close the stream and release the resources.
|
void |
SqlClient.close(Handler<AsyncResult<Void>> handler)
Close the client and release the associated resources.
|
void |
Cursor.close(Handler<AsyncResult<Void>> completionHandler)
Like
Cursor.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with a completionHandler called when the cursor has been released. |
void |
Transaction.commit(Handler<AsyncResult<Void>> handler)
Like
Transaction.commit(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) with an handler to be notified when the transaction commit has completed |
void |
Transaction.completion(Handler<AsyncResult<Void>> handler)
Like
Transaction.completion(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with a callback |
void |
PreparedQuery.execute(Handler<AsyncResult<T>> handler)
Execute the query.
|
void |
Query.execute(Handler<AsyncResult<T>> handler)
Execute the query.
|
void |
PreparedQuery.execute(Tuple tuple,
Handler<AsyncResult<T>> handler)
Execute the query.
|
void |
PreparedQuery.executeBatch(List<Tuple> batch,
Handler<AsyncResult<T>> handler)
Execute the query with a batch of tuples.
|
void |
Pool.getConnection(Handler<AsyncResult<SqlConnection>> handler)
Get a connection from the pool.
|
void |
RowStream.pipeTo(WriteStream<T> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
SqlConnection |
SqlConnection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler)
Create a prepared statement using the given
sql string. |
SqlConnection |
SqlConnection.prepare(String sql,
PrepareOptions options,
Handler<AsyncResult<PreparedStatement>> handler)
Create a prepared statement using the given
sql string. |
void |
Cursor.read(int count,
Handler<AsyncResult<RowSet<Row>>> handler)
Read rows from the cursor, the result is provided asynchronously to the
handler. |
void |
Transaction.rollback(Handler<AsyncResult<Void>> handler)
Like
Transaction.rollback(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) with an handler to be notified when the transaction rollback has completed |
<T> void |
Pool.withConnection(java.util.function.Function<SqlConnection,Future<T>> function,
Handler<AsyncResult<T>> handler)
Get a connection from the pool and execute the given
function. |
<T> void |
Pool.withConnection(Function<SqlConnection,Maybe<T>> function,
Handler<AsyncResult<T>> handler)
Get a connection from the pool and execute the given
function. |
<T> void |
Pool.withTransaction(java.util.function.Function<SqlConnection,Future<T>> function,
Handler<AsyncResult<T>> handler)
Execute the given
function within a transaction. |
<T> void |
Pool.withTransaction(Function<SqlConnection,Maybe<T>> function,
Handler<AsyncResult<T>> handler)
Execute the given
function within a transaction. |
<T> void |
Pool.withTransaction(TransactionPropagation txPropagation,
java.util.function.Function<SqlConnection,Future<T>> function,
Handler<AsyncResult<T>> handler)
Like
Pool.withTransaction(java.util.function.Function<io.vertx.reactivex.sqlclient.SqlConnection, io.vertx.core.Future<T>>, io.vertx.core.Handler<io.vertx.core.AsyncResult<T>>) but allows for setting the mode, defining how the acquired
connection is managed during the execution of the function. |
<T> void |
Pool.withTransaction(TransactionPropagation txPropagation,
Function<SqlConnection,Maybe<T>> function,
Handler<AsyncResult<T>> handler)
Like
Pool.withTransaction(java.util.function.Function<io.vertx.reactivex.sqlclient.SqlConnection, io.vertx.core.Future<T>>, io.vertx.core.Handler<io.vertx.core.AsyncResult<T>>) but allows for setting the mode, defining how the acquired
connection is managed during the execution of the function. |
| Modifier and Type | Method and Description |
|---|---|
void |
SqlTemplate.execute(I parameters,
Handler<AsyncResult<R>> handler)
Execute the query with the
parameters |
void |
SqlTemplate.executeBatch(List<I> batch,
Handler<AsyncResult<R>> handler)
Execute a batch query with the
batch. |
| Modifier and Type | Method and Description |
|---|---|
default RedisAPI |
RedisAPI.acl(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for Access List Control commands.
|
default RedisAPI |
RedisAPI.append(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Append a value to a key.
|
default RedisAPI |
RedisAPI.asking(Handler<AsyncResult<Response>> handler)
Sent by cluster clients after an -ASK redirect.
|
default RedisAPI |
RedisAPI.auth(List<String> args,
Handler<AsyncResult<Response>> handler)
Authenticate to the server.
|
default Redis |
Redis.batch(List<Request> commands,
Handler<AsyncResult<List<Response>>> onSend)
Sends a list of commands in a single IO operation, this prevents any inter twinning to happen from other
client users.
|
default RedisConnection |
RedisConnection.batch(List<Request> commands,
Handler<AsyncResult<List<Response>>> onSend)
Sends a list of commands in a single IO operation, this prevents any inter twinning to happen from other
client users.
|
default RedisAPI |
RedisAPI.bfAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.ADD.
|
default RedisAPI |
RedisAPI.bfCard(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.CARD.
|
default RedisAPI |
RedisAPI.bfDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.DEBUG.
|
default RedisAPI |
RedisAPI.bfExists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.EXISTS.
|
default RedisAPI |
RedisAPI.bfInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.INFO.
|
default RedisAPI |
RedisAPI.bfInsert(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.INSERT.
|
default RedisAPI |
RedisAPI.bfLoadchunk(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.LOADCHUNK.
|
default RedisAPI |
RedisAPI.bfMadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.MADD.
|
default RedisAPI |
RedisAPI.bfMexists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.MEXISTS.
|
default RedisAPI |
RedisAPI.bfReserve(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.RESERVE.
|
default RedisAPI |
RedisAPI.bfScandump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.SCANDUMP.
|
default RedisAPI |
RedisAPI.bgrewriteaof(Handler<AsyncResult<Response>> handler)
Asynchronously rewrite the append-only file.
|
default RedisAPI |
RedisAPI.bgsave(List<String> args,
Handler<AsyncResult<Response>> handler)
Asynchronously save the dataset to disk.
|
default RedisAPI |
RedisAPI.bitcount(List<String> args,
Handler<AsyncResult<Response>> handler)
Count set bits in a string.
|
default RedisAPI |
RedisAPI.bitfield(List<String> args,
Handler<AsyncResult<Response>> handler)
Perform arbitrary bitfield integer operations on strings.
|
default RedisAPI |
RedisAPI.bitfieldRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Perform arbitrary bitfield integer operations on strings.
|
default RedisAPI |
RedisAPI.bitop(List<String> args,
Handler<AsyncResult<Response>> handler)
Perform bitwise operations between strings.
|
default RedisAPI |
RedisAPI.bitpos(List<String> args,
Handler<AsyncResult<Response>> handler)
Find first bit set or clear in a string.
|
default RedisAPI |
RedisAPI.blmove(String arg0,
String arg1,
String arg2,
String arg3,
String arg4,
Handler<AsyncResult<Response>> handler)
Pop an element from a list, push it to another list and return it; or block until one is available.
|
default RedisAPI |
RedisAPI.blmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Pop elements from a list, or block until one is available.
|
default RedisAPI |
RedisAPI.blpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the first element in a list, or block until one is available.
|
default RedisAPI |
RedisAPI.brpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the last element in a list, or block until one is available.
|
default RedisAPI |
RedisAPI.brpoplpush(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Pop an element from a list, push it to another list and return it; or block until one is available.
|
default RedisAPI |
RedisAPI.bzmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with scores in a sorted set or block until one is available.
|
default RedisAPI |
RedisAPI.bzpopmax(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return the member with the highest score from one or more sorted sets, or block until one is available.
|
default RedisAPI |
RedisAPI.bzpopmin(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return the member with the lowest score from one or more sorted sets, or block until one is available.
|
default RedisAPI |
RedisAPI.cfAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.ADD.
|
default RedisAPI |
RedisAPI.cfAddnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.ADDNX.
|
default RedisAPI |
RedisAPI.cfCompact(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.COMPACT.
|
default RedisAPI |
RedisAPI.cfCount(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.COUNT.
|
default RedisAPI |
RedisAPI.cfDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.DEBUG.
|
default RedisAPI |
RedisAPI.cfDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.DEL.
|
default RedisAPI |
RedisAPI.cfExists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.EXISTS.
|
default RedisAPI |
RedisAPI.cfInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.INFO.
|
default RedisAPI |
RedisAPI.cfInsert(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.INSERT.
|
default RedisAPI |
RedisAPI.cfInsertnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.INSERTNX.
|
default RedisAPI |
RedisAPI.cfLoadchunk(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.LOADCHUNK.
|
default RedisAPI |
RedisAPI.cfMexists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.MEXISTS.
|
default RedisAPI |
RedisAPI.cfReserve(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.RESERVE.
|
default RedisAPI |
RedisAPI.cfScandump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.SCANDUMP.
|
default RedisAPI |
RedisAPI.client(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for client connection commands.
|
default RedisConnection |
RedisConnection.close(Handler<AsyncResult<Void>> onClose)
Closes the connection or returns to the pool.
|
default RedisAPI |
RedisAPI.cluster(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for cluster commands.
|
default RedisAPI |
RedisAPI.cmsIncrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INCRBY.
|
default RedisAPI |
RedisAPI.cmsInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INFO.
|
default RedisAPI |
RedisAPI.cmsInitbydim(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INITBYDIM.
|
default RedisAPI |
RedisAPI.cmsInitbyprob(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INITBYPROB.
|
default RedisAPI |
RedisAPI.cmsMerge(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.MERGE.
|
default RedisAPI |
RedisAPI.cmsQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.QUERY.
|
default RedisAPI |
RedisAPI.command(List<String> args,
Handler<AsyncResult<Response>> handler)
Get array of Redis command details.
|
default RedisAPI |
RedisAPI.config(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for server configuration commands.
|
default Redis |
Redis.connect(Handler<AsyncResult<RedisConnection>> handler)
Connects to the redis server.
|
default RedisAPI |
RedisAPI.copy(List<String> args,
Handler<AsyncResult<Response>> handler)
Copy a key.
|
default RedisAPI |
RedisAPI.dbsize(Handler<AsyncResult<Response>> handler)
Return the number of keys in the selected database.
|
default RedisAPI |
RedisAPI.debug(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for debugging commands.
|
default RedisAPI |
RedisAPI.decr(String arg0,
Handler<AsyncResult<Response>> handler)
Decrement the integer value of a key by one.
|
default RedisAPI |
RedisAPI.decrby(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Decrement the integer value of a key by the given number.
|
default RedisAPI |
RedisAPI.del(List<String> args,
Handler<AsyncResult<Response>> handler)
Delete a key.
|
default RedisAPI |
RedisAPI.discard(Handler<AsyncResult<Response>> handler)
Discard all commands issued after MULTI.
|
default RedisAPI |
RedisAPI.dump(String arg0,
Handler<AsyncResult<Response>> handler)
Return a serialized version of the value stored at the specified key.
|
default RedisAPI |
RedisAPI.echo(String arg0,
Handler<AsyncResult<Response>> handler)
Echo the given string.
|
default RedisAPI |
RedisAPI.eval(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a Lua script server side.
|
default RedisAPI |
RedisAPI.evalRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a read-only Lua script server side.
|
default RedisAPI |
RedisAPI.evalsha(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a Lua script server side.
|
default RedisAPI |
RedisAPI.evalshaRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a read-only Lua script server side.
|
default RedisAPI |
RedisAPI.exec(Handler<AsyncResult<Response>> handler)
Execute all commands issued after MULTI.
|
default RedisAPI |
RedisAPI.exists(List<String> args,
Handler<AsyncResult<Response>> handler)
Determine if a key exists.
|
default RedisAPI |
RedisAPI.expire(List<String> args,
Handler<AsyncResult<Response>> handler)
Set a key's time to live in seconds.
|
default RedisAPI |
RedisAPI.expireat(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the expiration for a key as a UNIX timestamp.
|
default RedisAPI |
RedisAPI.expiretime(String arg0,
Handler<AsyncResult<Response>> handler)
Get the expiration Unix timestamp for a key.
|
default RedisAPI |
RedisAPI.failover(List<String> args,
Handler<AsyncResult<Response>> handler)
Start a coordinated failover between this server and one of its replicas.
|
default RedisAPI |
RedisAPI.fcall(List<String> args,
Handler<AsyncResult<Response>> handler)
Invoke a function.
|
default RedisAPI |
RedisAPI.fcallRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Invoke a read-only function.
|
default RedisAPI |
RedisAPI.flushall(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove all keys from all databases.
|
default RedisAPI |
RedisAPI.flushdb(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove all keys from the current database.
|
default RedisAPI |
RedisAPI.ftAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ADD.
|
default RedisAPI |
RedisAPI.ftAggregate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.AGGREGATE.
|
default RedisAPI |
RedisAPI.ftAliasadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALIASADD.
|
default RedisAPI |
RedisAPI.ftAliasaddifnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._ALIASADDIFNX.
|
default RedisAPI |
RedisAPI.ftAliasdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALIASDEL.
|
default RedisAPI |
RedisAPI.ftAliasdelifx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._ALIASDELIFX.
|
default RedisAPI |
RedisAPI.ftAliasupdate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALIASUPDATE.
|
default RedisAPI |
RedisAPI.ftAlter(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALTER.
|
default RedisAPI |
RedisAPI.ftAlterifnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._ALTERIFNX.
|
default RedisAPI |
RedisAPI.ftConfig(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.CONFIG.
|
default RedisAPI |
RedisAPI.ftCreate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.CREATE.
|
default RedisAPI |
RedisAPI.ftCreateifnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._CREATEIFNX.
|
default RedisAPI |
RedisAPI.ftCursor(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.CURSOR.
|
default RedisAPI |
RedisAPI.ftDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DEBUG.
|
default RedisAPI |
RedisAPI.ftDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DEL.
|
default RedisAPI |
RedisAPI.ftDictadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DICTADD.
|
default RedisAPI |
RedisAPI.ftDictdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DICTDEL.
|
default RedisAPI |
RedisAPI.ftDictdump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DICTDUMP.
|
default RedisAPI |
RedisAPI.ftDrop(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DROP.
|
default RedisAPI |
RedisAPI.ftDropifx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._DROPIFX.
|
default RedisAPI |
RedisAPI.ftDropindex(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DROPINDEX.
|
default RedisAPI |
RedisAPI.ftDropindexifx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._DROPINDEXIFX.
|
default RedisAPI |
RedisAPI.ftExplain(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.EXPLAIN.
|
default RedisAPI |
RedisAPI.ftExplaincli(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.EXPLAINCLI.
|
default RedisAPI |
RedisAPI.ftGet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.GET.
|
default RedisAPI |
RedisAPI.ftInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.INFO.
|
default RedisAPI |
RedisAPI.ftList(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._LIST.
|
default RedisAPI |
RedisAPI.ftMget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.MGET.
|
default RedisAPI |
RedisAPI.ftProfile(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.PROFILE.
|
default RedisAPI |
RedisAPI.ftSafeadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SAFEADD.
|
default RedisAPI |
RedisAPI.ftSearch(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SEARCH.
|
default RedisAPI |
RedisAPI.ftSpellcheck(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SPELLCHECK.
|
default RedisAPI |
RedisAPI.ftSugadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGADD.
|
default RedisAPI |
RedisAPI.ftSugdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGDEL.
|
default RedisAPI |
RedisAPI.ftSugget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGGET.
|
default RedisAPI |
RedisAPI.ftSuglen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGLEN.
|
default RedisAPI |
RedisAPI.ftSynadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SYNADD.
|
default RedisAPI |
RedisAPI.ftSyndump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SYNDUMP.
|
default RedisAPI |
RedisAPI.ftSynupdate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SYNUPDATE.
|
default RedisAPI |
RedisAPI.ftTagvals(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.TAGVALS.
|
default RedisAPI |
RedisAPI.function(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for function commands.
|
default RedisAPI |
RedisAPI.geoadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Add one or more geospatial items in the geospatial index represented using a sorted set.
|
default RedisAPI |
RedisAPI.geodist(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns the distance between two members of a geospatial index.
|
default RedisAPI |
RedisAPI.geohash(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns members of a geospatial index as standard geohash strings.
|
default RedisAPI |
RedisAPI.geopos(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns longitude and latitude of members of a geospatial index.
|
default RedisAPI |
RedisAPI.georadius(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members matching a given maximum distance from a point.
|
default RedisAPI |
RedisAPI.georadiusbymember(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members matching a given maximum distance from a member.
|
default RedisAPI |
RedisAPI.georadiusbymemberRo(List<String> args,
Handler<AsyncResult<Response>> handler)
A read-only variant for GEORADIUSBYMEMBER.
|
default RedisAPI |
RedisAPI.georadiusRo(List<String> args,
Handler<AsyncResult<Response>> handler)
A read-only variant for GEORADIUS.
|
default RedisAPI |
RedisAPI.geosearch(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members inside an area of a box or a circle.
|
default RedisAPI |
RedisAPI.geosearchstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members inside an area of a box or a circle, and store the result in another key.
|
default RedisAPI |
RedisAPI.get(String arg0,
Handler<AsyncResult<Response>> handler)
Get the value of a key.
|
default RedisAPI |
RedisAPI.getbit(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Returns the bit value at offset in the string value stored at key.
|
default RedisAPI |
RedisAPI.getdel(String arg0,
Handler<AsyncResult<Response>> handler)
Get the value of a key and delete the key.
|
default RedisAPI |
RedisAPI.getex(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the value of a key and optionally set its expiration.
|
default RedisAPI |
RedisAPI.getrange(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Get a substring of the string stored at a key.
|
default RedisAPI |
RedisAPI.getset(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Set the string value of a key and return its old value.
|
default RedisAPI |
RedisAPI.graphBulk(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.BULK.
|
default RedisAPI |
RedisAPI.graphConfig(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.CONFIG.
|
default RedisAPI |
RedisAPI.graphDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.DEBUG.
|
default RedisAPI |
RedisAPI.graphDelete(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.DELETE.
|
default RedisAPI |
RedisAPI.graphExplain(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.EXPLAIN.
|
default RedisAPI |
RedisAPI.graphList(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.LIST.
|
default RedisAPI |
RedisAPI.graphProfile(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.PROFILE.
|
default RedisAPI |
RedisAPI.graphQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.QUERY.
|
default RedisAPI |
RedisAPI.graphRoQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.RO_QUERY.
|
default RedisAPI |
RedisAPI.graphSlowlog(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.SLOWLOG.
|
default RedisAPI |
RedisAPI.hdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Delete one or more hash fields.
|
default RedisAPI |
RedisAPI.hello(List<String> args,
Handler<AsyncResult<Response>> handler)
Handshake with Redis.
|
default RedisAPI |
RedisAPI.hexists(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine if a hash field exists.
|
default RedisAPI |
RedisAPI.hget(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get the value of a hash field.
|
default RedisAPI |
RedisAPI.hgetall(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the fields and values in a hash.
|
default RedisAPI |
RedisAPI.hincrby(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Increment the integer value of a hash field by the given number.
|
default RedisAPI |
RedisAPI.hincrbyfloat(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Increment the float value of a hash field by the given amount.
|
default RedisAPI |
RedisAPI.hkeys(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the fields in a hash.
|
default RedisAPI |
RedisAPI.hlen(String arg0,
Handler<AsyncResult<Response>> handler)
Get the number of fields in a hash.
|
default RedisAPI |
RedisAPI.hmget(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the values of all the given hash fields.
|
default RedisAPI |
RedisAPI.hmset(List<String> args,
Handler<AsyncResult<Response>> handler)
Set multiple hash fields to multiple values.
|
default RedisAPI |
RedisAPI.hrandfield(List<String> args,
Handler<AsyncResult<Response>> handler)
Get one or multiple random fields from a hash.
|
default RedisAPI |
RedisAPI.hscan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate hash fields and associated values.
|
default RedisAPI |
RedisAPI.hset(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the string value of a hash field.
|
default RedisAPI |
RedisAPI.hsetnx(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value of a hash field, only if the field does not exist.
|
default RedisAPI |
RedisAPI.hstrlen(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get the length of the value of a hash field.
|
default RedisAPI |
RedisAPI.hvals(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the values in a hash.
|
default RedisAPI |
RedisAPI.incr(String arg0,
Handler<AsyncResult<Response>> handler)
Increment the integer value of a key by one.
|
default RedisAPI |
RedisAPI.incrby(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Increment the integer value of a key by the given amount.
|
default RedisAPI |
RedisAPI.incrbyfloat(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Increment the float value of a key by the given amount.
|
default RedisAPI |
RedisAPI.info(List<String> args,
Handler<AsyncResult<Response>> handler)
Get information and statistics about the server.
|
default RedisAPI |
RedisAPI.jsonArrappend(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRAPPEND.
|
default RedisAPI |
RedisAPI.jsonArrindex(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRINDEX.
|
default RedisAPI |
RedisAPI.jsonArrinsert(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRINSERT.
|
default RedisAPI |
RedisAPI.jsonArrlen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRLEN.
|
default RedisAPI |
RedisAPI.jsonArrpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRPOP.
|
default RedisAPI |
RedisAPI.jsonArrtrim(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRTRIM.
|
default RedisAPI |
RedisAPI.jsonClear(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.CLEAR.
|
default RedisAPI |
RedisAPI.jsonDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.DEBUG.
|
default RedisAPI |
RedisAPI.jsonDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.DEL.
|
default RedisAPI |
RedisAPI.jsonForget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.FORGET.
|
default RedisAPI |
RedisAPI.jsonGet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.GET.
|
default RedisAPI |
RedisAPI.jsonMget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.MGET.
|
default RedisAPI |
RedisAPI.jsonNumincrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.NUMINCRBY.
|
default RedisAPI |
RedisAPI.jsonNummultby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.NUMMULTBY.
|
default RedisAPI |
RedisAPI.jsonNumpowby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.NUMPOWBY.
|
default RedisAPI |
RedisAPI.jsonObjkeys(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.OBJKEYS.
|
default RedisAPI |
RedisAPI.jsonObjlen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.OBJLEN.
|
default RedisAPI |
RedisAPI.jsonResp(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.RESP.
|
default RedisAPI |
RedisAPI.jsonSet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.SET.
|
default RedisAPI |
RedisAPI.jsonStrappend(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.STRAPPEND.
|
default RedisAPI |
RedisAPI.jsonStrlen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.STRLEN.
|
default RedisAPI |
RedisAPI.jsonToggle(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.TOGGLE.
|
default RedisAPI |
RedisAPI.jsonType(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.TYPE.
|
default RedisAPI |
RedisAPI.keys(String arg0,
Handler<AsyncResult<Response>> handler)
Find all keys matching the given pattern.
|
default RedisAPI |
RedisAPI.lastsave(Handler<AsyncResult<Response>> handler)
Get the UNIX time stamp of the last successful save to disk.
|
default RedisAPI |
RedisAPI.latency(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for latency diagnostics commands.
|
default RedisAPI |
RedisAPI.lcs(List<String> args,
Handler<AsyncResult<Response>> handler)
Find longest common substring.
|
default RedisAPI |
RedisAPI.lindex(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get an element from a list by its index.
|
default RedisAPI |
RedisAPI.linsert(String arg0,
String arg1,
String arg2,
String arg3,
Handler<AsyncResult<Response>> handler)
Insert an element before or after another element in a list.
|
default RedisAPI |
RedisAPI.llen(String arg0,
Handler<AsyncResult<Response>> handler)
Get the length of a list.
|
default RedisAPI |
RedisAPI.lmove(String arg0,
String arg1,
String arg2,
String arg3,
Handler<AsyncResult<Response>> handler)
Pop an element from a list, push it to another list and return it.
|
default RedisAPI |
RedisAPI.lmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Pop elements from a list.
|
default RedisAPI |
RedisAPI.lolwut(List<String> args,
Handler<AsyncResult<Response>> handler)
Display some computer art and the Redis version.
|
default RedisAPI |
RedisAPI.lpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the first elements in a list.
|
default RedisAPI |
RedisAPI.lpos(List<String> args,
Handler<AsyncResult<Response>> handler)
Return the index of matching elements on a list.
|
default RedisAPI |
RedisAPI.lpush(List<String> args,
Handler<AsyncResult<Response>> handler)
Prepend one or multiple elements to a list.
|
default RedisAPI |
RedisAPI.lpushx(List<String> args,
Handler<AsyncResult<Response>> handler)
Prepend an element to a list, only if the list exists.
|
default RedisAPI |
RedisAPI.lrange(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Get a range of elements from a list.
|
default RedisAPI |
RedisAPI.lrem(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove elements from a list.
|
default RedisAPI |
RedisAPI.lset(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value of an element in a list by its index.
|
default RedisAPI |
RedisAPI.ltrim(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Trim a list to the specified range.
|
default RedisAPI |
RedisAPI.memory(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for memory diagnostics commands.
|
default RedisAPI |
RedisAPI.mget(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the values of all the given keys.
|
default RedisAPI |
RedisAPI.migrate(List<String> args,
Handler<AsyncResult<Response>> handler)
Atomically transfer a key from a Redis instance to another one.
|
default RedisAPI |
RedisAPI.module(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for module commands.
|
default RedisAPI |
RedisAPI.monitor(Handler<AsyncResult<Response>> handler)
Listen for all requests received by the server in real time.
|
default RedisAPI |
RedisAPI.move(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Move a key to another database.
|
default RedisAPI |
RedisAPI.mset(List<String> args,
Handler<AsyncResult<Response>> handler)
Set multiple keys to multiple values.
|
default RedisAPI |
RedisAPI.msetnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Set multiple keys to multiple values, only if none of the keys exist.
|
default RedisAPI |
RedisAPI.multi(Handler<AsyncResult<Response>> handler)
Mark the start of a transaction block.
|
default RedisAPI |
RedisAPI.object(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for object introspection commands.
|
default RedisAPI |
RedisAPI.persist(String arg0,
Handler<AsyncResult<Response>> handler)
Remove the expiration from a key.
|
default RedisAPI |
RedisAPI.pexpire(List<String> args,
Handler<AsyncResult<Response>> handler)
Set a key's time to live in milliseconds.
|
default RedisAPI |
RedisAPI.pexpireat(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the expiration for a key as a UNIX timestamp specified in milliseconds.
|
default RedisAPI |
RedisAPI.pexpiretime(String arg0,
Handler<AsyncResult<Response>> handler)
Get the expiration Unix timestamp for a key in milliseconds.
|
default RedisAPI |
RedisAPI.pfadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Adds the specified elements to the specified HyperLogLog.
|
default RedisAPI |
RedisAPI.pfcount(List<String> args,
Handler<AsyncResult<Response>> handler)
Return the approximated cardinality of the set(s) observed by the HyperLogLog at key(s).
|
default RedisAPI |
RedisAPI.pfdebug(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Internal commands for debugging HyperLogLog values.
|
default RedisAPI |
RedisAPI.pfmerge(List<String> args,
Handler<AsyncResult<Response>> handler)
Merge N different HyperLogLogs into a single one.
|
default RedisAPI |
RedisAPI.pfselftest(Handler<AsyncResult<Response>> handler)
An internal command for testing HyperLogLog values.
|
default RedisAPI |
RedisAPI.ping(List<String> args,
Handler<AsyncResult<Response>> handler)
Ping the server.
|
default RedisAPI |
RedisAPI.psetex(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value and expiration in milliseconds of a key.
|
default RedisAPI |
RedisAPI.psubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Listen for messages published to channels matching the given patterns.
|
default RedisAPI |
RedisAPI.psync(List<String> args,
Handler<AsyncResult<Response>> handler)
Internal command used for replication.
|
default RedisAPI |
RedisAPI.pttl(String arg0,
Handler<AsyncResult<Response>> handler)
Get the time to live for a key in milliseconds.
|
default RedisAPI |
RedisAPI.publish(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Post a message to a channel.
|
default RedisAPI |
RedisAPI.pubsub(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for Pub/Sub commands.
|
default RedisAPI |
RedisAPI.punsubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Stop listening for messages posted to channels matching the given patterns.
|
default RedisAPI |
RedisAPI.quit(List<String> args,
Handler<AsyncResult<Response>> handler)
Close the connection.
|
default RedisAPI |
RedisAPI.randomkey(Handler<AsyncResult<Response>> handler)
Return a random key from the keyspace.
|
default RedisAPI |
RedisAPI.readonly(Handler<AsyncResult<Response>> handler)
Enables read queries for a connection to a cluster replica node.
|
default RedisAPI |
RedisAPI.readwrite(Handler<AsyncResult<Response>> handler)
Disables read queries for a connection to a cluster replica node.
|
default RedisAPI |
RedisAPI.rename(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Rename a key.
|
default RedisAPI |
RedisAPI.renamenx(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Rename a key, only if the new key does not exist.
|
default RedisAPI |
RedisAPI.replconf(List<String> args,
Handler<AsyncResult<Response>> handler)
An internal command for configuring the replication stream.
|
default RedisAPI |
RedisAPI.replicaof(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Make the server a replica of another instance, or promote it as master.
|
default RedisAPI |
RedisAPI.reset(Handler<AsyncResult<Response>> handler)
Reset the connection.
|
default RedisAPI |
RedisAPI.restore(List<String> args,
Handler<AsyncResult<Response>> handler)
Create a key using the provided serialized value, previously obtained using DUMP.
|
default RedisAPI |
RedisAPI.restoreAsking(List<String> args,
Handler<AsyncResult<Response>> handler)
An internal command for migrating keys in a cluster.
|
default RedisAPI |
RedisAPI.role(Handler<AsyncResult<Response>> handler)
Return the role of the instance in the context of replication.
|
default RedisAPI |
RedisAPI.rpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the last elements in a list.
|
default RedisAPI |
RedisAPI.rpoplpush(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Remove the last element in a list, prepend it to another list and return it.
|
default RedisAPI |
RedisAPI.rpush(List<String> args,
Handler<AsyncResult<Response>> handler)
Append one or multiple elements to a list.
|
default RedisAPI |
RedisAPI.rpushx(List<String> args,
Handler<AsyncResult<Response>> handler)
Append an element to a list, only if the list exists.
|
default RedisAPI |
RedisAPI.sadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Add one or more members to a set.
|
default RedisAPI |
RedisAPI.save(Handler<AsyncResult<Response>> handler)
Synchronously save the dataset to disk.
|
default RedisAPI |
RedisAPI.scan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate the keys space.
|
default RedisAPI |
RedisAPI.scard(String arg0,
Handler<AsyncResult<Response>> handler)
Get the number of members in a set.
|
default RedisAPI |
RedisAPI.script(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for Lua scripts management commands.
|
default RedisAPI |
RedisAPI.sdiff(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sets.
|
default RedisAPI |
RedisAPI.sdiffstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sets and store the resulting set in a key.
|
default RedisAPI |
RedisAPI.select(String arg0,
Handler<AsyncResult<Response>> handler)
Change the selected database for the current connection.
|
default Redis |
Redis.send(Request command,
Handler<AsyncResult<Response>> onSend)
Send the given command to the redis server or cluster.
|
default RedisConnection |
RedisConnection.send(Request command,
Handler<AsyncResult<Response>> onSend)
Send the given command to the redis server or cluster.
|
default RedisAPI |
RedisAPI.set(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the string value of a key.
|
default RedisAPI |
RedisAPI.setbit(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Sets or clears the bit at offset in the string value stored at key.
|
default RedisAPI |
RedisAPI.setex(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value and expiration of a key.
|
default RedisAPI |
RedisAPI.setnx(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Set the value of a key, only if the key does not exist.
|
default RedisAPI |
RedisAPI.setrange(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Overwrite part of a string at key starting at the specified offset.
|
default RedisAPI |
RedisAPI.shutdown(List<String> args,
Handler<AsyncResult<Response>> handler)
Synchronously save the dataset to disk and then shut down the server.
|
default RedisAPI |
RedisAPI.sinter(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sets.
|
default RedisAPI |
RedisAPI.sintercard(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sets and return the cardinality of the result.
|
default RedisAPI |
RedisAPI.sinterstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sets and store the resulting set in a key.
|
default RedisAPI |
RedisAPI.sismember(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine if a given value is a member of a set.
|
default RedisAPI |
RedisAPI.slaveof(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Make the server a replica of another instance, or promote it as master.
|
default RedisAPI |
RedisAPI.slowlog(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for slow log commands.
|
default RedisAPI |
RedisAPI.smembers(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the members in a set.
|
default RedisAPI |
RedisAPI.smismember(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns the membership associated with the given elements for a set.
|
default RedisAPI |
RedisAPI.smove(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Move a member from one set to another.
|
default RedisAPI |
RedisAPI.sort(List<String> args,
Handler<AsyncResult<Response>> handler)
Sort the elements in a list, set or sorted set.
|
default RedisAPI |
RedisAPI.sortRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Sort the elements in a list, set or sorted set.
|
default RedisAPI |
RedisAPI.spop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return one or multiple random members from a set.
|
default RedisAPI |
RedisAPI.spublish(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Post a message to a shard channel.
|
default RedisAPI |
RedisAPI.srandmember(List<String> args,
Handler<AsyncResult<Response>> handler)
Get one or multiple random members from a set.
|
default RedisAPI |
RedisAPI.srem(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove one or more members from a set.
|
default RedisAPI |
RedisAPI.sscan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate Set elements.
|
default RedisAPI |
RedisAPI.ssubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Listen for messages published to the given shard channels.
|
default RedisAPI |
RedisAPI.strlen(String arg0,
Handler<AsyncResult<Response>> handler)
Get the length of the value stored in a key.
|
default RedisAPI |
RedisAPI.subscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Listen for messages published to the given channels.
|
default RedisAPI |
RedisAPI.substr(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Get a substring of the string stored at a key.
|
default RedisAPI |
RedisAPI.sunion(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sets.
|
default RedisAPI |
RedisAPI.sunionstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sets and store the resulting set in a key.
|
default RedisAPI |
RedisAPI.sunsubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Stop listening for messages posted to the given shard channels.
|
default RedisAPI |
RedisAPI.swapdb(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Swaps two Redis databases.
|
default RedisAPI |
RedisAPI.sync(Handler<AsyncResult<Response>> handler)
Internal command used for replication.
|
default RedisAPI |
RedisAPI.tdigestAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.ADD.
|
default RedisAPI |
RedisAPI.tdigestByrank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.BYRANK.
|
default RedisAPI |
RedisAPI.tdigestByrevrank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.BYREVRANK.
|
default RedisAPI |
RedisAPI.tdigestCdf(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.CDF.
|
default RedisAPI |
RedisAPI.tdigestCreate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.CREATE.
|
default RedisAPI |
RedisAPI.tdigestInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.INFO.
|
default RedisAPI |
RedisAPI.tdigestMax(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.MAX.
|
default RedisAPI |
RedisAPI.tdigestMerge(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.MERGE.
|
default RedisAPI |
RedisAPI.tdigestMin(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.MIN.
|
default RedisAPI |
RedisAPI.tdigestQuantile(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.QUANTILE.
|
default RedisAPI |
RedisAPI.tdigestRank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.RANK.
|
default RedisAPI |
RedisAPI.tdigestReset(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.RESET.
|
default RedisAPI |
RedisAPI.tdigestRevrank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.REVRANK.
|
default RedisAPI |
RedisAPI.tdigestTrimmedMean(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.TRIMMED_MEAN.
|
default RedisAPI |
RedisAPI.time(Handler<AsyncResult<Response>> handler)
Return the current server time.
|
default RedisAPI |
RedisAPI.timeseriesClusterset(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.CLUSTERSET.
|
default RedisAPI |
RedisAPI.timeseriesClustersetfromshard(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.CLUSTERSETFROMSHARD.
|
default RedisAPI |
RedisAPI.timeseriesHello(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.HELLO.
|
default RedisAPI |
RedisAPI.timeseriesInfocluster(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.INFOCLUSTER.
|
default RedisAPI |
RedisAPI.timeseriesInnercommunication(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.INNERCOMMUNICATION.
|
default RedisAPI |
RedisAPI.timeseriesNetworktest(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.NETWORKTEST.
|
default RedisAPI |
RedisAPI.timeseriesRefreshcluster(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.REFRESHCLUSTER.
|
default RedisAPI |
RedisAPI.topkAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.ADD.
|
default RedisAPI |
RedisAPI.topkCount(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.COUNT.
|
default RedisAPI |
RedisAPI.topkIncrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.INCRBY.
|
default RedisAPI |
RedisAPI.topkInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.INFO.
|
default RedisAPI |
RedisAPI.topkList(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.LIST.
|
default RedisAPI |
RedisAPI.topkQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.QUERY.
|
default RedisAPI |
RedisAPI.topkReserve(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.RESERVE.
|
default RedisAPI |
RedisAPI.touch(List<String> args,
Handler<AsyncResult<Response>> handler)
Alters the last access time of a key(s).
|
default RedisAPI |
RedisAPI.tsAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.ADD.
|
default RedisAPI |
RedisAPI.tsAlter(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.ALTER.
|
default RedisAPI |
RedisAPI.tsCreate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.CREATE.
|
default RedisAPI |
RedisAPI.tsCreaterule(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.CREATERULE.
|
default RedisAPI |
RedisAPI.tsDecrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.DECRBY.
|
default RedisAPI |
RedisAPI.tsDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.DEL.
|
default RedisAPI |
RedisAPI.tsDeleterule(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.DELETERULE.
|
default RedisAPI |
RedisAPI.tsGet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.GET.
|
default RedisAPI |
RedisAPI.tsIncrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.INCRBY.
|
default RedisAPI |
RedisAPI.tsInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.INFO.
|
default RedisAPI |
RedisAPI.tsMadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MADD.
|
default RedisAPI |
RedisAPI.tsMget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MGET.
|
default RedisAPI |
RedisAPI.tsMrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MRANGE.
|
default RedisAPI |
RedisAPI.tsMrevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MREVRANGE.
|
default RedisAPI |
RedisAPI.tsQueryindex(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.QUERYINDEX.
|
default RedisAPI |
RedisAPI.tsRange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.RANGE.
|
default RedisAPI |
RedisAPI.tsRevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.REVRANGE.
|
default RedisAPI |
RedisAPI.ttl(String arg0,
Handler<AsyncResult<Response>> handler)
Get the time to live for a key in seconds.
|
default RedisAPI |
RedisAPI.type(String arg0,
Handler<AsyncResult<Response>> handler)
Determine the type stored at key.
|
default RedisAPI |
RedisAPI.unlink(List<String> args,
Handler<AsyncResult<Response>> handler)
Delete a key asynchronously in another thread.
|
default RedisAPI |
RedisAPI.unsubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Stop listening for messages posted to the given channels.
|
default RedisAPI |
RedisAPI.unwatch(Handler<AsyncResult<Response>> handler)
Forget about all watched keys.
|
default RedisAPI |
RedisAPI.wait(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Wait for the synchronous replication of all the write commands sent in the context of the current connection.
|
default RedisAPI |
RedisAPI.watch(List<String> args,
Handler<AsyncResult<Response>> handler)
Watch the given keys to determine execution of the MULTI/EXEC block.
|
default RedisAPI |
RedisAPI.xack(List<String> args,
Handler<AsyncResult<Response>> handler)
Marks a pending message as correctly processed, effectively removing it from the pending entries list of the consumer group.
|
default RedisAPI |
RedisAPI.xadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Appends a new entry to a stream.
|
default RedisAPI |
RedisAPI.xautoclaim(List<String> args,
Handler<AsyncResult<Response>> handler)
Changes (or acquires) ownership of messages in a consumer group, as if the messages were delivered to the specified consumer.
|
default RedisAPI |
RedisAPI.xclaim(List<String> args,
Handler<AsyncResult<Response>> handler)
Changes (or acquires) ownership of a message in a consumer group, as if the message was delivered to the specified consumer.
|
default RedisAPI |
RedisAPI.xdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Removes the specified entries from the stream.
|
default RedisAPI |
RedisAPI.xgroup(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for consumer groups commands.
|
default RedisAPI |
RedisAPI.xinfo(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for stream introspection commands.
|
default RedisAPI |
RedisAPI.xlen(String arg0,
Handler<AsyncResult<Response>> handler)
Return the number of entries in a stream.
|
default RedisAPI |
RedisAPI.xpending(List<String> args,
Handler<AsyncResult<Response>> handler)
Return information and entries from a stream consumer group pending entries list, that are messages fetched but never acknowledged.
|
default RedisAPI |
RedisAPI.xrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of elements in a stream, with IDs matching the specified IDs interval.
|
default RedisAPI |
RedisAPI.xread(List<String> args,
Handler<AsyncResult<Response>> handler)
Return never seen elements in multiple streams, with IDs greater than the ones reported by the caller for each stream.
|
default RedisAPI |
RedisAPI.xreadgroup(List<String> args,
Handler<AsyncResult<Response>> handler)
Return new entries from a stream using a consumer group, or access the history of the pending entries for a given consumer.
|
default RedisAPI |
RedisAPI.xrevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of elements in a stream, with IDs matching the specified IDs interval, in reverse order (from greater to smaller IDs) compared to XRANGE.
|
default RedisAPI |
RedisAPI.xsetid(List<String> args,
Handler<AsyncResult<Response>> handler)
An internal command for replicating stream values.
|
default RedisAPI |
RedisAPI.xtrim(List<String> args,
Handler<AsyncResult<Response>> handler)
Trims the stream to (approximately if '~' is passed) a certain size.
|
default RedisAPI |
RedisAPI.zadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Add one or more members to a sorted set, or update its score if it already exists.
|
default RedisAPI |
RedisAPI.zcard(String arg0,
Handler<AsyncResult<Response>> handler)
Get the number of members in a sorted set.
|
default RedisAPI |
RedisAPI.zcount(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Count the members in a sorted set with scores within the given values.
|
default RedisAPI |
RedisAPI.zdiff(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sorted sets.
|
default RedisAPI |
RedisAPI.zdiffstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sorted sets and store the resulting sorted set in a new key.
|
default RedisAPI |
RedisAPI.zincrby(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Increment the score of a member in a sorted set.
|
default RedisAPI |
RedisAPI.zinter(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sorted sets.
|
default RedisAPI |
RedisAPI.zintercard(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sorted sets and return the cardinality of the result.
|
default RedisAPI |
RedisAPI.zinterstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sorted sets and store the resulting sorted set in a new key.
|
default RedisAPI |
RedisAPI.zlexcount(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Count the number of members in a sorted set between a given lexicographical range.
|
default RedisAPI |
RedisAPI.zmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with scores in a sorted set.
|
default RedisAPI |
RedisAPI.zmscore(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the score associated with the given members in a sorted set.
|
default RedisAPI |
RedisAPI.zpopmax(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with the highest scores in a sorted set.
|
default RedisAPI |
RedisAPI.zpopmin(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with the lowest scores in a sorted set.
|
default RedisAPI |
RedisAPI.zrandmember(List<String> args,
Handler<AsyncResult<Response>> handler)
Get one or multiple random elements from a sorted set.
|
default RedisAPI |
RedisAPI.zrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set.
|
default RedisAPI |
RedisAPI.zrangebylex(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by lexicographical range.
|
default RedisAPI |
RedisAPI.zrangebyscore(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by score.
|
default RedisAPI |
RedisAPI.zrangestore(List<String> args,
Handler<AsyncResult<Response>> handler)
Store a range of members from sorted set into another key.
|
default RedisAPI |
RedisAPI.zrank(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine the index of a member in a sorted set.
|
default RedisAPI |
RedisAPI.zrem(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove one or more members from a sorted set.
|
default RedisAPI |
RedisAPI.zremrangebylex(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove all members in a sorted set between the given lexicographical range.
|
default RedisAPI |
RedisAPI.zremrangebyrank(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove all members in a sorted set within the given indexes.
|
default RedisAPI |
RedisAPI.zremrangebyscore(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove all members in a sorted set within the given scores.
|
default RedisAPI |
RedisAPI.zrevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by index, with scores ordered from high to low.
|
default RedisAPI |
RedisAPI.zrevrangebylex(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by lexicographical range, ordered from higher to lower strings.
|
default RedisAPI |
RedisAPI.zrevrangebyscore(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by score, with scores ordered from high to low.
|
default RedisAPI |
RedisAPI.zrevrank(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine the index of a member in a sorted set, with scores ordered from high to low.
|
default RedisAPI |
RedisAPI.zscan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate sorted sets elements and associated scores.
|
default RedisAPI |
RedisAPI.zscore(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get the score associated with the given member in a sorted set.
|
default RedisAPI |
RedisAPI.zunion(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sorted sets.
|
default RedisAPI |
RedisAPI.zunionstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sorted sets and store the resulting sorted set in a new key.
|
| Modifier and Type | Field and Description |
|---|---|
protected java.util.function.Consumer<Handler<AsyncResult<T>>> |
SingleOnSubscribeAdapter.consumer |
| Modifier and Type | Method and Description |
|---|---|
static <T> Handler<AsyncResult<T>> |
RxHelper.toFuture(Action1<T> onNext)
Adapt an item callback as a
Handler<AsyncResult<T>>. |
static <T> Handler<AsyncResult<T>> |
RxHelper.toFuture(Action1<T> onNext,
Action1<Throwable> onError)
Adapt an item callback and an error callback as a
Handler<AsyncResult<T>>. |
static <T> Handler<AsyncResult<T>> |
RxHelper.toFuture(Action1<T> onNext,
Action1<Throwable> onError,
Action0 onComplete)
Adapt an item callback and an error callback as a
Handler<AsyncResult<T>>. |
static <T> Handler<AsyncResult<T>> |
RxHelper.toFuture(Observer<T> observer)
Adapt a
Subscriber as a Handler<AsyncResult<T>>;. |
Handler<AsyncResult<T>> |
ObservableFuture.toHandler() |
| Modifier and Type | Method and Description |
|---|---|
protected void |
HandlerAdapter.dispatch(AsyncResult<T> event) |
void |
HandlerAdapter.handle(AsyncResult<T> event) |
| Modifier and Type | Method and Description |
|---|---|
static <T> Subscriber<T> |
RxHelper.toSubscriber(Handler<AsyncResult<T>> handler)
Adapts a Vert.x
Handler<AsyncResult<T>> to an RxJava Subscriber. |
| Constructor and Description |
|---|
SingleOnSubscribeAdapter(java.util.function.Consumer<Handler<AsyncResult<T>>> consumer) |
| Modifier and Type | Method and Description |
|---|---|
AmqpConnection |
AmqpConnection.close(Handler<AsyncResult<Void>> done)
Closes the AMQP connection, i.e.
|
void |
AmqpSender.close(Handler<AsyncResult<Void>> handler)
Closes the sender.
|
void |
AmqpReceiver.close(Handler<AsyncResult<Void>> handler)
Closes the receiver.
|
void |
AmqpClient.close(Handler<AsyncResult<Void>> closeHandler)
Closes the client.
|
AmqpClient |
AmqpClient.connect(Handler<AsyncResult<AmqpConnection>> connectionHandler)
Connects to the AMQP broker or router.
|
AmqpConnection |
AmqpConnection.createAnonymousSender(Handler<AsyncResult<AmqpSender>> completionHandler)
Creates an anonymous sender.
|
AmqpConnection |
AmqpConnection.createDynamicReceiver(Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a dynamic receiver.
|
AmqpConnection |
AmqpConnection.createReceiver(String address,
AmqpReceiverOptions receiverOptions,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consumer messages from the given address.
|
AmqpClient |
AmqpClient.createReceiver(String address,
AmqpReceiverOptions receiverOptions,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consumer messages from the given address.
|
AmqpConnection |
AmqpConnection.createReceiver(String address,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consume messages from the given address.
|
AmqpClient |
AmqpClient.createReceiver(String address,
Handler<AsyncResult<AmqpReceiver>> completionHandler)
Creates a receiver used to consume messages from the given address.
|
AmqpConnection |
AmqpConnection.createSender(String address,
AmqpSenderOptions options,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpClient |
AmqpClient.createSender(String address,
AmqpSenderOptions options,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpConnection |
AmqpConnection.createSender(String address,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
AmqpClient |
AmqpClient.createSender(String address,
Handler<AsyncResult<AmqpSender>> completionHandler)
Creates a sender used to send messages to the given address.
|
void |
AmqpSender.end(AmqpMessage data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
AmqpSender.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
AmqpReceiver.pipeTo(WriteStream<AmqpMessage> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
AmqpSender |
AmqpSender.sendWithAck(AmqpMessage message,
Handler<AsyncResult<Void>> acknowledgementHandler)
Sends an AMQP message and waits for an acknowledgement.
|
void |
AmqpSender.write(AmqpMessage data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
ResultSet |
ResultSet.all(Handler<AsyncResult<List<com.datastax.oss.driver.api.core.cql.Row>>> handler)
The method should not be used concurrently with others like
ResultSet.fetchNextPage(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.cassandra.ResultSet>>) or . |
CassandraClient |
CassandraClient.close(Handler<AsyncResult<Void>> closeHandler)
Closes this client.
|
CassandraClient |
CassandraClient.execute(com.datastax.oss.driver.api.core.cql.Statement statement,
Handler<AsyncResult<ResultSet>> resultHandler)
Execute the statement and provide a handler for consuming results.
|
CassandraClient |
CassandraClient.execute(String query,
Handler<AsyncResult<ResultSet>> resultHandler)
Execute the query and provide a handler for consuming results.
|
CassandraClient |
CassandraClient.executeWithFullFetch(com.datastax.oss.driver.api.core.cql.Statement statement,
Handler<AsyncResult<List<com.datastax.oss.driver.api.core.cql.Row>>> resultHandler)
Execute the query and provide a handler for consuming results.
|
CassandraClient |
CassandraClient.executeWithFullFetch(String query,
Handler<AsyncResult<List<com.datastax.oss.driver.api.core.cql.Row>>> resultHandler)
Execute the query and provide a handler for consuming results.
|
void |
ResultSet.fetchNextPage(Handler<AsyncResult<ResultSet>> handler)
Like
ResultSet.fetchNextPage(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.cassandra.ResultSet>>) but with a direct callback. |
void |
CassandraClient.metadata(Handler<AsyncResult<com.datastax.oss.driver.api.core.metadata.Metadata>> handler)
Get for the session.
|
void |
CassandraRowStream.pipeTo(WriteStream<com.datastax.oss.driver.api.core.cql.Row> dst,
Handler<AsyncResult<Void>> handler) |
CassandraClient |
CassandraClient.prepare(com.datastax.oss.driver.api.core.cql.SimpleStatement statement,
Handler<AsyncResult<com.datastax.oss.driver.api.core.cql.PreparedStatement>> resultHandler)
Prepares the provided a .
|
CassandraClient |
CassandraClient.prepare(String query,
Handler<AsyncResult<com.datastax.oss.driver.api.core.cql.PreparedStatement>> resultHandler)
Prepares the provided query string.
|
CassandraClient |
CassandraClient.queryStream(com.datastax.oss.driver.api.core.cql.Statement statement,
Handler<AsyncResult<CassandraRowStream>> rowStreamHandler)
Executes the given SQL statement which returns the results of the query as a read stream.
|
CassandraClient |
CassandraClient.queryStream(String sql,
Handler<AsyncResult<CassandraRowStream>> rowStreamHandler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
| Modifier and Type | Method and Description |
|---|---|
<T> void |
CircuitBreaker.execute(Handler<Promise<T>> command,
Handler<AsyncResult<T>> handler)
Same as
CircuitBreaker.executeWithFallback(io.vertx.core.Handler<io.vertx.rxjava.core.Promise<T>>, java.util.function.Function<java.lang.Throwable, T>, io.vertx.core.Handler<io.vertx.core.AsyncResult<T>>) but using the circuit breaker default fallback. |
<T> void |
CircuitBreaker.executeWithFallback(Handler<Promise<T>> command,
java.util.function.Function<Throwable,T> fallback,
Handler<AsyncResult<T>> handler)
|
| Modifier and Type | Method and Description |
|---|---|
void |
ConfigRetriever.getConfig(Handler<AsyncResult<JsonObject>> completionHandler)
Reads the configuration from the different
and computes the final configuration.
|
| Modifier and Type | Method and Description |
|---|---|
void |
VertxBuilder.buildClustered(Handler<AsyncResult<Vertx>> handler)
Creates a clustered instance.
|
void |
Vertx.close(Handler<AsyncResult<Void>> completionHandler)
Like
Vertx.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but the completionHandler will be called when the close is complete |
void |
WorkerExecutor.close(Handler<AsyncResult<Void>> handler)
Close the executor.
|
static void |
Vertx.clusteredVertx(VertxOptions options,
Handler<AsyncResult<Vertx>> resultHandler)
Creates a clustered instance using the specified options.
|
void |
Vertx.deployVerticle(String name,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but DeploymentOptions are provided to configure the
deployment. |
void |
Vertx.deployVerticle(String name,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but the completionHandler will be notified when the deployment is complete. |
void |
Vertx.deployVerticle(java.util.function.Supplier<Verticle> verticleSupplier,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but Verticle instance is created by
invoking the verticleSupplier. |
void |
Vertx.deployVerticle(Verticle verticle,
DeploymentOptions options,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but DeploymentOptions are provided to configure the
deployment. |
void |
Vertx.deployVerticle(Verticle verticle,
Handler<AsyncResult<String>> completionHandler)
Like
Vertx.deployVerticle(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.String>>) but the completionHandler will be notified when the deployment is complete. |
<T> void |
Context.executeBlocking(Callable<T> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
Vertx.executeBlocking(Callable<T> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
WorkerExecutor.executeBlocking(Callable<T> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
Context.executeBlocking(Callable<T> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
Vertx.executeBlocking(Callable<T> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
WorkerExecutor.executeBlocking(Callable<T> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
|
<T> void |
Context.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
Vertx.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
WorkerExecutor.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
boolean ordered,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
Context.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
Vertx.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
<T> void |
WorkerExecutor.executeBlocking(Handler<Promise<T>> blockingCodeHandler,
Handler<AsyncResult<T>> resultHandler)
Deprecated.
|
void |
TimeoutStream.pipeTo(WriteStream<Long> dst,
Handler<AsyncResult<Void>> handler)
Deprecated.
|
void |
Vertx.undeploy(String deploymentID,
Handler<AsyncResult<Void>> completionHandler)
Like
#undeploy(String) but the completionHandler will be notified when the undeployment is complete. |
| Modifier and Type | Method and Description |
|---|---|
DatagramSocket |
DatagramSocket.blockMulticastGroup(String multicastAddress,
String sourceToBlock,
Handler<AsyncResult<Void>> handler)
Block the given address for the given multicast address and notifies the once
the operation completes.
|
DatagramSocket |
DatagramSocket.blockMulticastGroup(String multicastAddress,
String networkInterface,
String sourceToBlock,
Handler<AsyncResult<Void>> handler)
Block the given address for the given multicast address on the given network interface and notifies
the once the operation completes.
|
void |
DatagramSocket.close(Handler<AsyncResult<Void>> handler)
Closes the
DatagramSocket implementation asynchronous
and notifies the handler once done. |
DatagramSocket |
DatagramSocket.listen(int port,
String host,
Handler<AsyncResult<DatagramSocket>> handler)
Start listening on the given port and host.
|
DatagramSocket |
DatagramSocket.listenMulticastGroup(String multicastAddress,
Handler<AsyncResult<Void>> handler)
Joins a multicast group and listens for packets send to it.
|
DatagramSocket |
DatagramSocket.listenMulticastGroup(String multicastAddress,
String networkInterface,
String source,
Handler<AsyncResult<Void>> handler)
Joins a multicast group and listens for packets send to it on the given network interface.
|
void |
DatagramSocket.pipeTo(WriteStream<DatagramPacket> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
DatagramSocket |
DatagramSocket.send(Buffer packet,
int port,
String host,
Handler<AsyncResult<Void>> handler)
Write the given
Buffer to the SocketAddress. |
DatagramSocket |
DatagramSocket.send(String str,
int port,
String host,
Handler<AsyncResult<Void>> handler)
Write the given
String to the SocketAddress using UTF8 encoding. |
DatagramSocket |
DatagramSocket.send(String str,
String enc,
int port,
String host,
Handler<AsyncResult<Void>> handler)
Write the given
String to the SocketAddress using the given encoding. |
DatagramSocket |
DatagramSocket.unlistenMulticastGroup(String multicastAddress,
Handler<AsyncResult<Void>> handler)
Leaves a multicast group and stops listening for packets send to it.
|
DatagramSocket |
DatagramSocket.unlistenMulticastGroup(String multicastAddress,
String networkInterface,
String source,
Handler<AsyncResult<Void>> handler)
Leaves a multicast group and stops listening for packets send to it on the given network interface.
|
| Modifier and Type | Method and Description |
|---|---|
void |
DnsClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
DnsClient |
DnsClient.lookup(String name,
Handler<AsyncResult<String>> handler)
Try to lookup the A (ipv4) or AAAA (ipv6) record for the given name.
|
DnsClient |
DnsClient.lookup4(String name,
Handler<AsyncResult<String>> handler)
Try to lookup the A (ipv4) record for the given name.
|
DnsClient |
DnsClient.lookup6(String name,
Handler<AsyncResult<String>> handler)
Try to lookup the AAAA (ipv6) record for the given name.
|
DnsClient |
DnsClient.resolveA(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve all A (ipv4) records for the given name.
|
DnsClient |
DnsClient.resolveAAAA(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve all AAAA (ipv6) records for the given name.
|
DnsClient |
DnsClient.resolveCNAME(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve the CNAME record for the given name.
|
DnsClient |
DnsClient.resolveMX(String name,
Handler<AsyncResult<List<MxRecord>>> handler)
Try to resolve the MX records for the given name.
|
DnsClient |
DnsClient.resolveNS(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve the NS records for the given name.
|
DnsClient |
DnsClient.resolvePTR(String name,
Handler<AsyncResult<String>> handler)
Try to resolve the PTR record for the given name.
|
DnsClient |
DnsClient.resolveSRV(String name,
Handler<AsyncResult<List<SrvRecord>>> handler)
Try to resolve the SRV records for the given name.
|
DnsClient |
DnsClient.resolveTXT(String name,
Handler<AsyncResult<List<String>>> handler)
Try to resolve the TXT records for the given name.
|
DnsClient |
DnsClient.reverseLookup(String ipaddress,
Handler<AsyncResult<String>> handler)
Try to do a reverse lookup of an IP address.
|
| Modifier and Type | Method and Description |
|---|---|
void |
MessageProducer.close(Handler<AsyncResult<Void>> handler)
Same as
MessageProducer.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
MessageConsumer.completionHandler(Handler<AsyncResult<Void>> completionHandler)
Optional method which can be called to indicate when the registration has been propagated across the cluster.
|
void |
MessageConsumer.pipeTo(WriteStream<Message<T>> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
<R> void |
Message.replyAndRequest(Object message,
DeliveryOptions options,
Handler<AsyncResult<Message<R>>> replyHandler)
Like
Message.replyAndRequest(java.lang.Object, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.eventbus.Message<R>>>) but specifying options that can be used
to configure the delivery. |
<R> void |
Message.replyAndRequest(Object message,
Handler<AsyncResult<Message<R>>> replyHandler)
Reply to this message, specifying a
replyHandler for the reply - i.e. |
<T> EventBus |
EventBus.request(String address,
Object message,
DeliveryOptions options,
Handler<AsyncResult<Message<T>>> replyHandler)
Like
EventBus.request(java.lang.String, java.lang.Object, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.eventbus.Message<T>>>) but specifying options that can be used to configure the delivery. |
<T> EventBus |
EventBus.request(String address,
Object message,
Handler<AsyncResult<Message<T>>> replyHandler)
Sends a message and specify a
replyHandler that will be called if the recipient
subsequently replies to the message. |
void |
MessageConsumer.unregister(Handler<AsyncResult<Void>> completionHandler)
Unregisters the handler which created this registration
|
void |
MessageProducer.write(T body,
Handler<AsyncResult<Void>> handler)
Write a message to the event-bus, either sending or publishing.
|
| Modifier and Type | Method and Description |
|---|---|
FileSystem |
FileSystem.chmod(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Change the permissions on the file represented by
path to perms, asynchronously. |
FileSystem |
FileSystem.chmodRecursive(String path,
String perms,
String dirPerms,
Handler<AsyncResult<Void>> handler)
Change the permissions on the file represented by
path to perms, asynchronously. |
FileSystem |
FileSystem.chown(String path,
String user,
String group,
Handler<AsyncResult<Void>> handler)
Change the ownership on the file represented by
path to user and {code group}, asynchronously. |
void |
AsyncFile.close(Handler<AsyncResult<Void>> handler)
Close the file.
|
FileSystem |
FileSystem.copy(String from,
String to,
CopyOptions options,
Handler<AsyncResult<Void>> handler)
Copy a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.copy(String from,
String to,
Handler<AsyncResult<Void>> handler)
Copy a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.copyRecursive(String from,
String to,
boolean recursive,
Handler<AsyncResult<Void>> handler)
Copy a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.createFile(String path,
Handler<AsyncResult<Void>> handler)
Creates an empty file with the specified
path, asynchronously. |
FileSystem |
FileSystem.createFile(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Creates an empty file with the specified
path and permissions perms, asynchronously. |
FileSystem |
FileSystem.createTempDirectory(String prefix,
Handler<AsyncResult<String>> handler)
Creates a new directory in the default temporary-file directory, using the given
prefix to generate its name, asynchronously.
|
FileSystem |
FileSystem.createTempDirectory(String prefix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new directory in the default temporary-file directory, using the given
prefix to generate its name, asynchronously.
|
FileSystem |
FileSystem.createTempDirectory(String dir,
String prefix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new directory in the directory provided by the path
path, using the given
prefix to generate its name, asynchronously. |
FileSystem |
FileSystem.createTempFile(String prefix,
String suffix,
Handler<AsyncResult<String>> handler)
Creates a new file in the default temporary-file directory, using the given
prefix and suffix to generate its name, asynchronously.
|
FileSystem |
FileSystem.createTempFile(String prefix,
String suffix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new file in the directory provided by the path
dir, using the given
prefix and suffix to generate its name, asynchronously. |
FileSystem |
FileSystem.createTempFile(String dir,
String prefix,
String suffix,
String perms,
Handler<AsyncResult<String>> handler)
Creates a new file in the directory provided by the path
dir, using the given
prefix and suffix to generate its name, asynchronously. |
FileSystem |
FileSystem.delete(String path,
Handler<AsyncResult<Void>> handler)
Deletes the file represented by the specified
path, asynchronously. |
FileSystem |
FileSystem.deleteRecursive(String path,
boolean recursive,
Handler<AsyncResult<Void>> handler)
Deletes the file represented by the specified
path, asynchronously. |
void |
AsyncFile.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
AsyncFile.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
FileSystem |
FileSystem.exists(String path,
Handler<AsyncResult<Boolean>> handler)
Determines whether the file as specified by the path
path exists, asynchronously. |
AsyncFile |
AsyncFile.flush(Handler<AsyncResult<Void>> handler)
Same as
AsyncFile.flush(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but the handler will be called when the flush is complete or if an error occurs |
FileSystem |
FileSystem.fsProps(String path,
Handler<AsyncResult<FileSystemProps>> handler)
Returns properties of the file-system being used by the specified
path, asynchronously. |
void |
AsyncFileLock.isValid(Handler<AsyncResult<Boolean>> handler)
Like
AsyncFileLock.isValid(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but the handler will be called when the operation completes or if an error occurs. |
FileSystem |
FileSystem.link(String link,
String existing,
Handler<AsyncResult<Void>> handler)
Create a hard link on the file system from
link to existing, asynchronously. |
void |
AsyncFile.lock(Handler<AsyncResult<AsyncFileLock>> handler)
Like
AsyncFile.lock(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.file.AsyncFileLock>>) but the handler will be called when the operation is complete or if an error occurs. |
void |
AsyncFile.lock(long position,
long size,
boolean shared,
Handler<AsyncResult<AsyncFileLock>> handler)
Like
AsyncFile.lock(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.file.AsyncFileLock>>) but the handler will be called when the operation is complete or if an error occurs. |
FileSystem |
FileSystem.lprops(String path,
Handler<AsyncResult<FileProps>> handler)
Obtain properties for the link represented by
path, asynchronously. |
FileSystem |
FileSystem.mkdir(String path,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path, asynchronously. |
FileSystem |
FileSystem.mkdir(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path, asynchronously. |
FileSystem |
FileSystem.mkdirs(String path,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path and any non existent parents, asynchronously. |
FileSystem |
FileSystem.mkdirs(String path,
String perms,
Handler<AsyncResult<Void>> handler)
Create the directory represented by
path and any non existent parents, asynchronously. |
FileSystem |
FileSystem.move(String from,
String to,
CopyOptions options,
Handler<AsyncResult<Void>> handler)
Move a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.move(String from,
String to,
Handler<AsyncResult<Void>> handler)
Move a file from the path
from to path to, asynchronously. |
FileSystem |
FileSystem.open(String path,
OpenOptions options,
Handler<AsyncResult<AsyncFile>> handler)
Open the file represented by
path, asynchronously. |
void |
AsyncFile.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
FileSystem |
FileSystem.props(String path,
Handler<AsyncResult<FileProps>> handler)
Obtain properties for the file represented by
path, asynchronously. |
AsyncFile |
AsyncFile.read(Buffer buffer,
int offset,
long position,
int length,
Handler<AsyncResult<Buffer>> handler)
Reads
length bytes of data from the file at position position in the file, asynchronously. |
FileSystem |
FileSystem.readDir(String path,
Handler<AsyncResult<List<String>>> handler)
Read the contents of the directory specified by
path, asynchronously. |
FileSystem |
FileSystem.readDir(String path,
String filter,
Handler<AsyncResult<List<String>>> handler)
Read the contents of the directory specified by
path, asynchronously. |
FileSystem |
FileSystem.readFile(String path,
Handler<AsyncResult<Buffer>> handler)
Reads the entire file as represented by the path
path as a , asynchronously. |
FileSystem |
FileSystem.readSymlink(String link,
Handler<AsyncResult<String>> handler)
Returns the path representing the file that the symbolic link specified by
link points to, asynchronously. |
void |
AsyncFileLock.release(Handler<AsyncResult<Void>> handler)
Like
AsyncFileLock.release(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but the handler will be called when the operation completes or if an error occurs. |
void |
AsyncFile.size(Handler<AsyncResult<Long>> handler)
Like
AsyncFile.size(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Long>>) but the handler will be called when the operation is complete or if an error occurs. |
FileSystem |
FileSystem.symlink(String link,
String existing,
Handler<AsyncResult<Void>> handler)
Create a symbolic link on the file system from
link to existing, asynchronously. |
FileSystem |
FileSystem.truncate(String path,
long len,
Handler<AsyncResult<Void>> handler)
Truncate the file represented by
path to length len in bytes, asynchronously. |
FileSystem |
FileSystem.unlink(String link,
Handler<AsyncResult<Void>> handler)
Unlinks the link on the file system represented by the path
link, asynchronously. |
void |
AsyncFile.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
AsyncFile.write(Buffer buffer,
long position,
Handler<AsyncResult<Void>> handler)
Write a
Buffer to the file at position position in the file, asynchronously. |
FileSystem |
FileSystem.writeFile(String path,
Buffer data,
Handler<AsyncResult<Void>> handler)
Creates the file, and writes the specified
Buffer data to the file represented by the path path,
asynchronously. |
| Modifier and Type | Method and Description |
|---|---|
HttpClientResponse |
HttpClientResponse.body(Handler<AsyncResult<Buffer>> handler)
Same as
HttpClientResponse.body(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.buffer.Buffer>>) but with an handler called when the operation completes |
HttpServerRequest |
HttpServerRequest.body(Handler<AsyncResult<Buffer>> handler)
Same as
HttpServerRequest.body(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.buffer.Buffer>>) but with an handler called when the operation completes |
void |
WebSocketClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
void |
ServerWebSocket.close(Handler<AsyncResult<Void>> handler)
Same as
ServerWebSocket.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServer.close(Handler<AsyncResult<Void>> completionHandler)
Like
HttpServer.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but supplying a handler that will be called when the server is actually closed (or has failed). |
void |
WebSocket.close(Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpConnection.close(Handler<AsyncResult<Void>> handler)
Close the connection and all the currently active streams.
|
void |
HttpClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
void |
ClientWebSocket.close(Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocketBase.close(Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ServerWebSocket.close(short statusCode,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocket.close(short statusCode,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ClientWebSocket.close(short statusCode,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocketBase.close(short statusCode,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ServerWebSocket.close(short statusCode,
String reason,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocket.close(short statusCode,
String reason,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ClientWebSocket.close(short statusCode,
String reason,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocketBase.close(short statusCode,
String reason,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.connect(Handler<AsyncResult<HttpClientResponse>> handler)
Create an HTTP tunnel to the server.
|
void |
WebSocketClient.connect(int port,
String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the specified port, host and relative request URI
|
void |
ClientWebSocket.connect(int port,
String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the specified port, host and relative request URI
|
void |
WebSocketClient.connect(String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the default client port, default client host and specified, relative request URI.
|
void |
ClientWebSocket.connect(String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect this WebSocket at the relative request URI using the default host and port.
|
void |
WebSocketClient.connect(String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket to the default client port and specified host and relative request URI.
|
void |
ClientWebSocket.connect(String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Connect this WebSocket to the host and relative request URI and default port.
|
void |
WebSocketClient.connect(WebSocketConnectOptions options,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket with the specified options.
|
void |
ClientWebSocket.connect(WebSocketConnectOptions options,
Handler<AsyncResult<WebSocket>> handler)
Connect a WebSocket with the specified options.
|
void |
HttpServerResponse.end(Buffer chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ServerWebSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
HttpClientRequest.end(Buffer chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
ClientWebSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
WebSocketBase.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
HttpClientResponse.end(Handler<AsyncResult<Void>> handler)
Same as
HttpClientResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServerResponse.end(Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ServerWebSocket.end(Handler<AsyncResult<Void>> handler)
|
void |
HttpClientRequest.end(Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WebSocket.end(Handler<AsyncResult<Void>> handler)
|
void |
HttpServerRequest.end(Handler<AsyncResult<Void>> handler)
Same as
HttpServerRequest.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
ClientWebSocket.end(Handler<AsyncResult<Void>> handler)
|
void |
WebSocketBase.end(Handler<AsyncResult<Void>> handler)
|
void |
HttpServerResponse.end(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.end(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServerResponse.end(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.end(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.end(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
HttpServer |
HttpServer.listen(Handler<AsyncResult<HttpServer>> listenHandler)
Like
HttpServer.listen(int, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.http.HttpServer>>) but supplying a handler that will be called when the server is actually listening (or has failed). |
HttpServer |
HttpServer.listen(int port,
Handler<AsyncResult<HttpServer>> listenHandler)
Like
HttpServer.listen(int, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.http.HttpServer>>) but supplying a handler that will be called when the server is actually listening (or has failed). |
HttpServer |
HttpServer.listen(int port,
String host,
Handler<AsyncResult<HttpServer>> listenHandler)
Like
HttpServer.listen(int, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.http.HttpServer>>) but supplying a handler that will be called when the server is actually
listening (or has failed). |
HttpServer |
HttpServer.listen(SocketAddress address,
Handler<AsyncResult<HttpServer>> listenHandler)
Tell the server to start listening on the given address supplying
a handler that will be called when the server is actually
listening (or has failed).
|
HttpConnection |
HttpConnection.ping(Buffer data,
Handler<AsyncResult<Buffer>> pongHandler)
Send a frame to the remote endpoint.
|
void |
HttpClientResponse.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
ServerWebSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
WebSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
HttpServerFileUpload.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
HttpServerRequest.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
ClientWebSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
WebSocketBase.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String path,
Handler<AsyncResult<HttpServerResponse>> handler)
Like
HttpServerResponse.push(io.vertx.core.http.HttpMethod, java.lang.String, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.http.HttpServerResponse>>) with the host copied from the current request. |
HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String path,
MultiMap headers,
Handler<AsyncResult<HttpServerResponse>> handler)
Like
HttpServerResponse.push(io.vertx.core.http.HttpMethod, java.lang.String, java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.http.HttpServerResponse>>) with the host copied from the current request. |
HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String host,
String path,
Handler<AsyncResult<HttpServerResponse>> handler)
|
HttpServerResponse |
HttpServerResponse.push(HttpMethod method,
String host,
String path,
MultiMap headers,
Handler<AsyncResult<HttpServerResponse>> handler)
Push a response to the client.
The
handler will be notified with a success when the push can be sent and with
a failure when the client has disabled push or reset the push before it has been sent.
The handler may be queued if the client has reduced the maximum number of streams the server can push
concurrently.
Push can be sent only for peer initiated streams and if the response is not ended. |
void |
HttpClient.request(HttpMethod method,
int port,
String host,
String requestURI,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server at the
host and port. |
void |
HttpClient.request(HttpMethod method,
String requestURI,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server at the default host and port.
|
void |
HttpClient.request(HttpMethod method,
String host,
String requestURI,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server at the
host and default port. |
void |
HttpClient.request(RequestOptions options,
Handler<AsyncResult<HttpClientRequest>> handler)
Create an HTTP request to send to the server.
|
HttpClientRequest |
HttpClientRequest.response(Handler<AsyncResult<HttpClientResponse>> handler)
Set a callback for the associated
HttpClientResponse. |
void |
HttpClientRequest.send(Buffer body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a buffer
body. |
void |
HttpServerResponse.send(Buffer body,
Handler<AsyncResult<Void>> handler)
Send the request with a buffer
body. |
void |
HttpClientRequest.send(Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with an empty body.
|
void |
HttpServerResponse.send(Handler<AsyncResult<Void>> handler)
Send the request with an empty body.
|
void |
HttpClientRequest.send(Observable<Buffer> body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a stream
body. |
void |
HttpServerResponse.send(Observable<Buffer> body,
Handler<AsyncResult<Void>> handler)
Send the request with a stream
body. |
void |
HttpClientRequest.send(ReadStream<Buffer> body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a stream
body. |
void |
HttpServerResponse.send(ReadStream<Buffer> body,
Handler<AsyncResult<Void>> handler)
Send the request with a stream
body. |
void |
HttpClientRequest.send(String body,
Handler<AsyncResult<HttpClientResponse>> handler)
Send the request with a string
body. |
void |
HttpServerResponse.send(String body,
Handler<AsyncResult<Void>> handler)
Send the request with a string
body. |
HttpServerResponse |
HttpServerResponse.sendFile(String filename,
Handler<AsyncResult<Void>> resultHandler)
Like
HttpServerResponse.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but providing a handler which will be notified once the file has been completely
written to the wire. |
HttpServerResponse |
HttpServerResponse.sendFile(String filename,
long offset,
Handler<AsyncResult<Void>> resultHandler)
Like
HttpServerResponse.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but providing a handler which will be notified once the file has been completely
written to the wire. |
HttpServerResponse |
HttpServerResponse.sendFile(String filename,
long offset,
long length,
Handler<AsyncResult<Void>> resultHandler)
Like
HttpServerResponse.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but providing a handler which will be notified once the file has been
completely written to the wire. |
HttpClientRequest |
HttpClientRequest.sendHead(Handler<AsyncResult<Void>> completionHandler)
Like
HttpClientRequest.sendHead(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler after headers have been sent. |
void |
ServerWebSocket.setHandshake(Future<Integer> future,
Handler<AsyncResult<Integer>> handler)
Deprecated.
|
void |
HttpConnection.shutdown(Handler<AsyncResult<Void>> handler)
Shutdown a 30 seconds timeout (
shutdown(30, TimeUnit.SECONDS)). |
void |
HttpConnection.shutdown(long timeout,
Handler<AsyncResult<Void>> handler)
Deprecated.
|
void |
HttpConnection.shutdown(long timeout,
TimeUnit unit,
Handler<AsyncResult<Void>> handler)
Initiate a graceful connection shutdown, the connection is taken out of service and closed when all the inflight requests
are processed, otherwise after a
timeout the connection will be closed. |
void |
HttpServerFileUpload.streamToFileSystem(String filename,
Handler<AsyncResult<Void>> handler)
Stream the content of this upload to the given file on storage.
|
void |
HttpServerRequest.toNetSocket(Handler<AsyncResult<NetSocket>> handler)
Establish a TCP tunnel with the client.
|
void |
HttpServerRequest.toWebSocket(Handler<AsyncResult<ServerWebSocket>> handler)
Upgrade the connection of the current request to a WebSocket.
|
HttpConnection |
HttpConnection.updateSettings(Http2Settings settings,
Handler<AsyncResult<Void>> completionHandler)
Send to the remote endpoint an update of this endpoint settings
The
completionHandler will be notified when the remote endpoint has acknowledged the settings. |
void |
WebSocketClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
WebSocketClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpServer.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
HttpServer.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
HttpClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
WebSocketClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
WebSocketClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpServer.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
HttpServer.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
HttpClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
HttpClient.webSocket(int port,
String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocket(String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocket(String host,
String requestURI,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocket(WebSocketConnectOptions options,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpClient.webSocketAbs(String url,
MultiMap headers,
WebsocketVersion version,
List<String> subProtocols,
Handler<AsyncResult<WebSocket>> handler)
Deprecated.
|
void |
HttpServerResponse.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
ServerWebSocket.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
HttpClientRequest.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
WebSocket.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
ClientWebSocket.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
WebSocketBase.write(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
HttpServerResponse.write(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.write(io.vertx.rxjava.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.write(String chunk,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.write(io.vertx.rxjava.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServerResponse.write(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.write(io.vertx.rxjava.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpClientRequest.write(String chunk,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
HttpClientRequest.write(io.vertx.rxjava.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeBinaryMessage(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeBinaryMessage(io.vertx.rxjava.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
HttpServerResponse.writeEarlyHints(MultiMap headers,
Handler<AsyncResult<Void>> handler)
Same as
HttpServerResponse.writeEarlyHints(io.vertx.rxjava.core.MultiMap, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeFinalBinaryFrame(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeFinalBinaryFrame(io.vertx.rxjava.core.buffer.Buffer, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeFinalTextFrame(String text,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeFinalTextFrame(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeFrame(WebSocketFrame frame,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeFrame(io.vertx.rxjava.core.http.WebSocketFrame, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
ServerWebSocket |
ServerWebSocket.writePing(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writePing(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writePing(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writePing(Buffer data,
Handler<AsyncResult<Void>> handler)
Writes a ping frame to the connection.
|
ServerWebSocket |
ServerWebSocket.writePong(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writePong(Buffer data,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writePong(Buffer data,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writePong(Buffer data,
Handler<AsyncResult<Void>> handler)
Writes a pong frame to the connection.
|
ServerWebSocket |
ServerWebSocket.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler) |
WebSocket |
WebSocket.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler) |
ClientWebSocket |
ClientWebSocket.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler) |
WebSocketBase |
WebSocketBase.writeTextMessage(String text,
Handler<AsyncResult<Void>> handler)
Same as
WebSocketBase.writeTextMessage(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
NetClient.close(Handler<AsyncResult<Void>> handler)
Close the client.
|
void |
NetSocket.close(Handler<AsyncResult<Void>> handler)
Close the NetSocket and notify the
handler when the operation completes. |
void |
NetServer.close(Handler<AsyncResult<Void>> completionHandler)
Like
NetServer.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but supplying a handler that will be notified when close is complete. |
NetClient |
NetClient.connect(int port,
String host,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
port and host. |
NetClient |
NetClient.connect(int port,
String host,
String serverName,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
port and host. |
NetClient |
NetClient.connect(SocketAddress remoteAddress,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
remoteAddress. |
NetClient |
NetClient.connect(SocketAddress remoteAddress,
String serverName,
Handler<AsyncResult<NetSocket>> connectHandler)
Open a connection to a server at the specific
remoteAddress. |
void |
NetSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
NetSocket.end(Handler<AsyncResult<Void>> handler)
|
NetServer |
NetServer.listen(Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.net.NetServer>>) but providing a handler that will be notified when the server is listening, or fails. |
NetServer |
NetServer.listen(int port,
Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.net.NetServer>>) but providing a handler that will be notified when the server is listening, or fails. |
NetServer |
NetServer.listen(int port,
String host,
Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.net.NetServer>>) but providing a handler that will be notified when the server is listening, or fails. |
NetServer |
NetServer.listen(SocketAddress localAddress,
Handler<AsyncResult<NetServer>> listenHandler)
Like
NetServer.listen(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.net.NetServer>>) but providing a handler that will be notified when the server is listening, or fails. |
void |
NetSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
NetSocket |
NetSocket.sendFile(String filename,
Handler<AsyncResult<Void>> resultHandler)
Same as
NetSocket.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but also takes a handler that will be called when the send has completed or
a failure has occurred |
NetSocket |
NetSocket.sendFile(String filename,
long offset,
Handler<AsyncResult<Void>> resultHandler)
Same as
NetSocket.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but also takes a handler that will be called when the send has completed or
a failure has occurred |
NetSocket |
NetSocket.sendFile(String filename,
long offset,
long length,
Handler<AsyncResult<Void>> resultHandler)
Same as
NetSocket.sendFile(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but also takes a handler that will be called when the send has completed or
a failure has occurred |
void |
NetClient.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
NetClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
NetServer.updateSSLOptions(SSLOptions options,
boolean force,
Handler<AsyncResult<Boolean>> handler)
Like
NetServer.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
NetClient.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
NetClient.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
void |
NetServer.updateSSLOptions(SSLOptions options,
Handler<AsyncResult<Boolean>> handler)
Like
NetServer.updateSSLOptions(io.vertx.core.net.SSLOptions, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Boolean>>) but supplying a handler that will be called when the update
happened (or has failed). |
NetSocket |
NetSocket.upgradeToSsl(Handler<AsyncResult<Void>> handler)
Upgrade channel to use SSL/TLS.
|
NetSocket |
NetSocket.upgradeToSsl(String serverName,
Handler<AsyncResult<Void>> handler)
Upgrade channel to use SSL/TLS.
|
void |
NetSocket.write(Buffer message,
Handler<AsyncResult<Void>> handler)
Like
WriteStream.write(T, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the message has been written
or failed to be written. |
void |
NetSocket.write(String str,
Handler<AsyncResult<Void>> handler)
Same as
NetSocket.write(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
NetSocket.write(String str,
String enc,
Handler<AsyncResult<Void>> handler)
Same as
NetSocket.write(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
RecordParser.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
JsonParser.pipeTo(WriteStream<JsonEvent> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
| Modifier and Type | Method and Description |
|---|---|
void |
Counter.addAndGet(long value,
Handler<AsyncResult<Long>> resultHandler)
Add the value to the counter atomically and return the new count
|
void |
AsyncMap.clear(Handler<AsyncResult<Void>> resultHandler)
Clear all entries in the map
|
void |
Counter.compareAndSet(long expected,
long value,
Handler<AsyncResult<Boolean>> resultHandler)
Set the counter to the specified value only if the current value is the expectec value.
|
void |
Counter.decrementAndGet(Handler<AsyncResult<Long>> resultHandler)
Decrement the counter atomically and return the new count
|
void |
Counter.get(Handler<AsyncResult<Long>> resultHandler)
Get the current value of the counter
|
void |
AsyncMap.get(K k,
Handler<AsyncResult<V>> resultHandler)
Get a value from the map, asynchronously.
|
void |
Counter.getAndAdd(long value,
Handler<AsyncResult<Long>> resultHandler)
Add the value to the counter atomically and return the value before the add
|
void |
Counter.getAndIncrement(Handler<AsyncResult<Long>> resultHandler)
Increment the counter atomically and return the value before the increment.
|
<K,V> void |
SharedData.getAsyncMap(String name,
Handler<AsyncResult<AsyncMap<K,V>>> resultHandler)
Get the
AsyncMap with the specified name. |
<K,V> void |
SharedData.getClusterWideMap(String name,
Handler<AsyncResult<AsyncMap<K,V>>> resultHandler)
Get the cluster wide map with the specified name.
|
void |
SharedData.getCounter(String name,
Handler<AsyncResult<Counter>> resultHandler)
Get an asynchronous counter.
|
<K,V> void |
SharedData.getLocalAsyncMap(String name,
Handler<AsyncResult<AsyncMap<K,V>>> resultHandler)
Get the
AsyncMap with the specified name. |
void |
SharedData.getLocalCounter(String name,
Handler<AsyncResult<Counter>> resultHandler)
Get an asynchronous local counter.
|
void |
SharedData.getLocalLock(String name,
Handler<AsyncResult<Lock>> resultHandler)
Get an asynchronous local lock with the specified name.
|
void |
SharedData.getLocalLockWithTimeout(String name,
long timeout,
Handler<AsyncResult<Lock>> resultHandler)
|
void |
SharedData.getLock(String name,
Handler<AsyncResult<Lock>> resultHandler)
Get an asynchronous lock with the specified name.
|
void |
SharedData.getLockWithTimeout(String name,
long timeout,
Handler<AsyncResult<Lock>> resultHandler)
Like
SharedData.getLock(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava.core.shareddata.Lock>>) but specifying a timeout. |
void |
Counter.incrementAndGet(Handler<AsyncResult<Long>> resultHandler)
Increment the counter atomically and return the new count
|
void |
AsyncMap.keys(Handler<AsyncResult<Set<K>>> resultHandler)
Get the keys of the map, asynchronously.
|
void |
AsyncMap.put(K k,
V v,
Handler<AsyncResult<Void>> completionHandler)
Put a value in the map, asynchronously.
|
void |
AsyncMap.put(K k,
V v,
long ttl,
Handler<AsyncResult<Void>> completionHandler)
Like
AsyncMap.put(K, V, io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but specifying a time to live for the entry. |
void |
AsyncMap.putIfAbsent(K k,
V v,
Handler<AsyncResult<V>> completionHandler)
Put the entry only if there is no entry with the key already present.
|
void |
AsyncMap.putIfAbsent(K k,
V v,
long ttl,
Handler<AsyncResult<V>> completionHandler)
Link
AsyncMap.putIfAbsent(K, V, io.vertx.core.Handler<io.vertx.core.AsyncResult<V>>) but specifying a time to live for the entry. |
void |
AsyncMap.remove(K k,
Handler<AsyncResult<V>> resultHandler)
Remove a value from the map, asynchronously.
|
void |
AsyncMap.removeIfPresent(K k,
V v,
Handler<AsyncResult<Boolean>> resultHandler)
Remove a value from the map, only if entry already exists with same value.
|
void |
AsyncMap.replace(K k,
V v,
Handler<AsyncResult<V>> resultHandler)
Replace the entry only if it is currently mapped to some value
|
void |
AsyncMap.replace(K k,
V v,
long ttl,
Handler<AsyncResult<V>> resultHandler)
Replace the entry only if it is currently mapped to some value
|
void |
AsyncMap.replaceIfPresent(K k,
V oldValue,
V newValue,
Handler<AsyncResult<Boolean>> resultHandler)
Replace the entry only if it is currently mapped to a specific value
|
void |
AsyncMap.replaceIfPresent(K k,
V oldValue,
V newValue,
long ttl,
Handler<AsyncResult<Boolean>> resultHandler)
Replace the entry only if it is currently mapped to a specific value
|
void |
AsyncMap.size(Handler<AsyncResult<Integer>> resultHandler)
Provide the number of entries in the map
|
void |
AsyncMap.values(Handler<AsyncResult<List<V>>> resultHandler)
Get the values of the map, asynchronously.
|
| Modifier and Type | Method and Description |
|---|---|
void |
WriteStream.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
WriteStream.end(T data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
ReadStream.pipeTo(WriteStream<T> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
Pipe.to(WriteStream<T> dst,
Handler<AsyncResult<Void>> completionHandler)
Start to pipe the elements to the destination
WriteStream. |
void |
WriteStream.write(T data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
static void |
DB2Connection.connect(Vertx vertx,
DB2ConnectOptions connectOptions,
Handler<AsyncResult<DB2Connection>> handler)
Create a connection to DB2 server with the given
connectOptions. |
static void |
DB2Connection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<DB2Connection>> handler)
|
DB2Connection |
DB2Connection.debug(Handler<AsyncResult<Void>> handler)
Send a DEBUG command to dump debug information to the server's stdout.
|
DB2Connection |
DB2Connection.ping(Handler<AsyncResult<Void>> handler)
Send a PING command to check if the server is alive.
|
DB2Connection |
DB2Connection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler) |
| Modifier and Type | Method and Description |
|---|---|
User |
User.isAuthorized(Authorization authority,
Handler<AsyncResult<Boolean>> resultHandler)
Deprecated.
|
User |
User.isAuthorized(String authority,
Handler<AsyncResult<Boolean>> resultHandler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
void |
AuthenticationProvider.authenticate(Credentials credentials,
Handler<AsyncResult<User>> resultHandler)
Authenticate a user.
|
void |
AuthenticationProvider.authenticate(JsonObject credentials,
Handler<AsyncResult<User>> resultHandler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
void |
AuthorizationProvider.getAuthorizations(User user,
Handler<AsyncResult<Void>> handler)
Updates the user with the set of authorizations.
|
| Modifier and Type | Method and Description |
|---|---|
JDBCUserUtil |
JDBCUserUtil.createHashedUser(String username,
String hash,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
JDBCUserUtil |
JDBCUserUtil.createRolePermission(String role,
String permission,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
JDBCUserUtil |
JDBCUserUtil.createUser(String username,
String password,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
JDBCUserUtil |
JDBCUserUtil.createUserRole(String username,
String role,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
MongoUserUtil |
MongoUserUtil.createHashedUser(String username,
String hash,
Handler<AsyncResult<String>> resultHandler)
Insert a user into a database.
|
MongoUserUtil |
MongoUserUtil.createUser(String username,
String password,
Handler<AsyncResult<String>> resultHandler)
Insert a user into a database.
|
MongoUserUtil |
MongoUserUtil.createUserRolesAndPermissions(String username,
List<String> roles,
List<String> permissions,
Handler<AsyncResult<String>> resultHandler)
Insert a user role into a database.
|
void |
MongoAuth.insertUser(String username,
String password,
List<String> roles,
List<String> permissions,
Handler<AsyncResult<String>> resultHandler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
OAuth2Auth |
OAuth2Auth.jWKSet(Handler<AsyncResult<Void>> handler)
Retrieve the public server JSON Web Key (JWK) required to verify the authenticity
of issued ID and access tokens.
|
OAuth2Auth |
OAuth2Auth.refresh(User user,
Handler<AsyncResult<User>> handler)
Refresh the current User (access token).
|
OAuth2Auth |
OAuth2Auth.revoke(User user,
Handler<AsyncResult<Void>> handler)
Revoke an obtained access token.
|
OAuth2Auth |
OAuth2Auth.revoke(User user,
String tokenType,
Handler<AsyncResult<Void>> handler)
Revoke an obtained access or refresh token.
|
OAuth2Auth |
OAuth2Auth.userInfo(User user,
Handler<AsyncResult<JsonObject>> handler)
Retrieve profile information and other attributes for a logged-in end-user.
|
| Modifier and Type | Method and Description |
|---|---|
static void |
SalesforceAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
IBMCloudAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
GoogleAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
AzureADAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
OpenIDConnectAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
KeycloakAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
static void |
AmazonCognitoAuth.discover(Vertx vertx,
OAuth2Options config,
Handler<AsyncResult<OAuth2Auth>> handler)
Create a OAuth2Auth provider for OpenID Connect Discovery.
|
| Modifier and Type | Method and Description |
|---|---|
SqlUserUtil |
SqlUserUtil.createHashedUser(String username,
String hash,
Handler<AsyncResult<Void>> resultHandler)
Insert a user into a database.
|
SqlUserUtil |
SqlUserUtil.createRolePermission(String role,
String permission,
Handler<AsyncResult<Void>> resultHandler)
Insert a role permission into a database.
|
SqlUserUtil |
SqlUserUtil.createUser(String username,
String password,
Handler<AsyncResult<Void>> resultHandler)
Insert a user into a database.
|
SqlUserUtil |
SqlUserUtil.createUserRole(String username,
String role,
Handler<AsyncResult<Void>> resultHandler)
Insert a user role into a database.
|
| Modifier and Type | Method and Description |
|---|---|
WebAuthn |
WebAuthn.createCredentialsOptions(JsonObject user,
Handler<AsyncResult<JsonObject>> handler)
Gets a challenge and any other parameters for the
navigator.credentials.create() call. |
MetaDataService |
MetaDataService.fetchTOC(Handler<AsyncResult<Boolean>> handler)
Fetches the FIDO2 MDS3 TOC and process the entries to the metadata store.
|
MetaDataService |
MetaDataService.fetchTOC(String url,
Handler<AsyncResult<Boolean>> handler)
Fetches the FIDO2 TOC for the given URL and process the entries to the metadata store.
|
WebAuthn |
WebAuthn.getCredentialsOptions(String name,
Handler<AsyncResult<JsonObject>> handler)
Creates an assertion challenge and any other parameters for the
navigator.credentials.get() call. |
| Modifier and Type | Method and Description |
|---|---|
ConsulClient |
ConsulClient.agentInfo(Handler<AsyncResult<JsonObject>> resultHandler)
Returns the configuration and member information of the local agent
|
ConsulClient |
ConsulClient.catalogDatacenters(Handler<AsyncResult<List<String>>> resultHandler)
Return all the datacenters that are known by the Consul server
|
ConsulClient |
ConsulClient.catalogNodes(Handler<AsyncResult<NodeList>> resultHandler)
Returns the nodes registered in a datacenter
|
ConsulClient |
ConsulClient.catalogNodeServices(String node,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the node's registered services
|
ConsulClient |
ConsulClient.catalogNodeServicesWithOptions(String node,
BlockingQueryOptions options,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the node's registered services
This is blocking query unlike
ConsulClient.catalogNodeServices(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.ServiceList>>) |
ConsulClient |
ConsulClient.catalogNodesWithOptions(NodeQueryOptions options,
Handler<AsyncResult<NodeList>> resultHandler)
Returns the nodes registered in a datacenter
|
ConsulClient |
ConsulClient.catalogServiceNodes(String service,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the nodes providing a service
|
ConsulClient |
ConsulClient.catalogServiceNodesWithOptions(String service,
ServiceQueryOptions options,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the nodes providing a service
|
ConsulClient |
ConsulClient.catalogServices(Handler<AsyncResult<ServiceList>> resultHandler)
Returns the services registered in a datacenter
|
ConsulClient |
ConsulClient.catalogServicesWithOptions(BlockingQueryOptions options,
Handler<AsyncResult<ServiceList>> resultHandler)
Returns the services registered in a datacenter
This is blocking query unlike
ConsulClient.catalogServices(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.ServiceList>>) |
ConsulClient |
ConsulClient.cloneAclToken(String accessorId,
CloneAclTokenOptions cloneAclToken,
Handler<AsyncResult<AclToken>> resultHandler)
Clones an existing ACL token
|
ConsulClient |
ConsulClient.cloneAclToken(String id,
Handler<AsyncResult<String>> idHandler)
Deprecated.
|
ConsulClient |
ConsulClient.coordinateDatacenters(Handler<AsyncResult<List<DcCoordinates>>> resultHandler)
Returns the WAN network coordinates for all Consul servers, organized by DCs
|
ConsulClient |
ConsulClient.coordinateNodes(Handler<AsyncResult<CoordinateList>> resultHandler)
Returns the LAN network coordinates for all nodes in a given DC
|
ConsulClient |
ConsulClient.coordinateNodesWithOptions(BlockingQueryOptions options,
Handler<AsyncResult<CoordinateList>> resultHandler)
Returns the LAN network coordinates for all nodes in a given DC
This is blocking query unlike
ConsulClient.coordinateNodes(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.CoordinateList>>) |
ConsulClient |
ConsulClient.createAclPolicy(AclPolicy policy,
Handler<AsyncResult<String>> resultHandler)
Creates a new ACL policy
|
ConsulClient |
ConsulClient.createAclToken(AclToken token,
Handler<AsyncResult<AclToken>> resultHandler)
Create an Acl token
|
ConsulClient |
ConsulClient.createAclToken(AclToken token,
Handler<AsyncResult<String>> idHandler)
Deprecated.
|
ConsulClient |
ConsulClient.createPreparedQuery(PreparedQueryDefinition definition,
Handler<AsyncResult<String>> resultHandler) |
ConsulClient |
ConsulClient.createSession(Handler<AsyncResult<String>> idHandler)
Initialize a new session
|
ConsulClient |
ConsulClient.createSessionWithOptions(SessionOptions options,
Handler<AsyncResult<String>> idHandler)
Initialize a new session
|
ConsulClient |
ConsulClient.deleteAclToken(String accessorId,
Handler<AsyncResult<Boolean>> resultHandler)
Deletes an ACL token
|
ConsulClient |
ConsulClient.deletePolicy(String id,
Handler<AsyncResult<Boolean>> resultHandler)
This endpoint deletes an ACL policy
|
ConsulClient |
ConsulClient.deletePreparedQuery(String id,
Handler<AsyncResult<Void>> resultHandler)
Deletes an existing prepared query
|
ConsulClient |
ConsulClient.deleteValue(String key,
Handler<AsyncResult<Void>> resultHandler)
Remove the key/value pair that corresponding to the specified key
|
ConsulClient |
ConsulClient.deleteValues(String keyPrefix,
Handler<AsyncResult<Void>> resultHandler)
Removes all the key/value pair that corresponding to the specified key prefix
|
ConsulClient |
ConsulClient.deregisterCatalogService(String nodeId,
String serviceId,
Handler<AsyncResult<Void>> resultHandler)
Deregister entities from the node or deregister the node itself.
|
ConsulClient |
ConsulClient.deregisterCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Remove a check from the local agent.
|
ConsulClient |
ConsulClient.deregisterService(String id,
Handler<AsyncResult<Void>> resultHandler)
Remove a service from the local agent.
|
ConsulClient |
ConsulClient.destroyAclToken(String id,
Handler<AsyncResult<Void>> resultHandler)
Deprecated.
|
ConsulClient |
ConsulClient.destroySession(String id,
Handler<AsyncResult<Void>> resultHandler)
Destroys the given session
|
ConsulClient |
ConsulClient.executePreparedQuery(String query,
Handler<AsyncResult<PreparedQueryExecuteResponse>> resultHandler)
Executes an existing prepared query.
|
ConsulClient |
ConsulClient.executePreparedQueryWithOptions(String query,
PreparedQueryExecuteOptions options,
Handler<AsyncResult<PreparedQueryExecuteResponse>> resultHandler)
Executes an existing prepared query.
|
ConsulClient |
ConsulClient.failCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "critical".
|
ConsulClient |
ConsulClient.failCheckWithNote(String checkId,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "critical".
|
ConsulClient |
ConsulClient.fireEvent(String name,
Handler<AsyncResult<Event>> resultHandler)
Fires a new user event
|
ConsulClient |
ConsulClient.fireEventWithOptions(String name,
EventOptions options,
Handler<AsyncResult<Event>> resultHandler)
Fires a new user event
|
ConsulClient |
ConsulClient.getAclPolicies(Handler<AsyncResult<List<AclPolicy>>> resultHandler)
This endpoint lists all the ACL policies.
|
ConsulClient |
ConsulClient.getAclTokens(Handler<AsyncResult<List<AclToken>>> resultHandler)
Get list of Acl token
|
ConsulClient |
ConsulClient.getAllPreparedQueries(Handler<AsyncResult<List<PreparedQueryDefinition>>> resultHandler)
Returns a list of all prepared queries.
|
ConsulClient |
ConsulClient.getKeys(String keyPrefix,
Handler<AsyncResult<List<String>>> resultHandler)
Returns the list of keys that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getKeysWithOptions(String keyPrefix,
BlockingQueryOptions options,
Handler<AsyncResult<List<String>>> resultHandler)
Returns the list of keys that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getPreparedQuery(String id,
Handler<AsyncResult<PreparedQueryDefinition>> resultHandler)
Returns an existing prepared query
|
ConsulClient |
ConsulClient.getValue(String key,
Handler<AsyncResult<KeyValue>> resultHandler)
Returns key/value pair that corresponding to the specified key.
|
ConsulClient |
ConsulClient.getValues(String keyPrefix,
Handler<AsyncResult<KeyValueList>> resultHandler)
Returns the list of key/value pairs that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getValuesWithOptions(String keyPrefix,
BlockingQueryOptions options,
Handler<AsyncResult<KeyValueList>> resultHandler)
Returns the list of key/value pairs that corresponding to the specified key prefix.
|
ConsulClient |
ConsulClient.getValueWithOptions(String key,
BlockingQueryOptions options,
Handler<AsyncResult<KeyValue>> resultHandler)
Returns key/value pair that corresponding to the specified key.
|
ConsulClient |
ConsulClient.healthChecks(String service,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks associated with the service
|
ConsulClient |
ConsulClient.healthChecksWithOptions(String service,
CheckQueryOptions options,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks associated with the service
|
ConsulClient |
ConsulClient.healthNodesWithOptions(String node,
CheckQueryOptions options,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks specific to the node provided on the path.
|
ConsulClient |
ConsulClient.healthServiceNodes(String service,
boolean passing,
Handler<AsyncResult<ServiceEntryList>> resultHandler)
Returns the nodes providing the service.
|
ConsulClient |
ConsulClient.healthServiceNodesWithOptions(String service,
boolean passing,
ServiceQueryOptions options,
Handler<AsyncResult<ServiceEntryList>> resultHandler)
Returns the nodes providing the service.
|
ConsulClient |
ConsulClient.healthState(HealthState healthState,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks in the specified status
|
ConsulClient |
ConsulClient.healthStateWithOptions(HealthState healthState,
CheckQueryOptions options,
Handler<AsyncResult<CheckList>> resultHandler)
Returns the checks in the specified status
|
ConsulClient |
ConsulClient.infoAclToken(String id,
Handler<AsyncResult<AclToken>> tokenHandler)
Deprecated.
|
ConsulClient |
ConsulClient.infoSession(String id,
Handler<AsyncResult<Session>> resultHandler)
Returns the requested session information
|
ConsulClient |
ConsulClient.infoSessionWithOptions(String id,
BlockingQueryOptions options,
Handler<AsyncResult<Session>> resultHandler)
Returns the requested session information
This is blocking query unlike
ConsulClient.infoSession(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.Session>>) |
ConsulClient |
ConsulClient.leaderStatus(Handler<AsyncResult<String>> resultHandler)
Get the Raft leader for the datacenter in which the agent is running.
|
ConsulClient |
ConsulClient.listAclTokens(Handler<AsyncResult<List<AclToken>>> resultHandler)
Deprecated.
|
ConsulClient |
ConsulClient.listEvents(Handler<AsyncResult<EventList>> resultHandler)
Returns the most recent events known by the agent
|
ConsulClient |
ConsulClient.listEventsWithOptions(EventListOptions options,
Handler<AsyncResult<EventList>> resultHandler)
Returns the most recent events known by the agent.
|
ConsulClient |
ConsulClient.listNodeSessions(String nodeId,
Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions for a given node
|
ConsulClient |
ConsulClient.listNodeSessionsWithOptions(String nodeId,
BlockingQueryOptions options,
Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions for a given node
This is blocking query unlike
ConsulClient.listNodeSessions(java.lang.String, io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.SessionList>>) |
ConsulClient |
ConsulClient.listSessions(Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions
|
ConsulClient |
ConsulClient.listSessionsWithOptions(BlockingQueryOptions options,
Handler<AsyncResult<SessionList>> resultHandler)
Returns the active sessions
This is blocking query unlike
ConsulClient.listSessions(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.ext.consul.SessionList>>) |
ConsulClient |
ConsulClient.localChecks(Handler<AsyncResult<List<Check>>> resultHandler)
Return all the checks that are registered with the local agent.
|
ConsulClient |
ConsulClient.localServices(Handler<AsyncResult<List<Service>>> resultHandler)
Returns list of services registered with the local agent.
|
ConsulClient |
ConsulClient.maintenanceService(MaintenanceOptions maintenanceOptions,
Handler<AsyncResult<Void>> resultHandler)
Places a given service into "maintenance mode"
|
ConsulClient |
ConsulClient.passCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "passing".
|
ConsulClient |
ConsulClient.passCheckWithNote(String checkId,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "passing".
|
ConsulClient |
ConsulClient.peersStatus(Handler<AsyncResult<List<String>>> resultHandler)
Retrieves the Raft peers for the datacenter in which the the agent is running.
|
ConsulClient |
ConsulClient.putValue(String key,
String value,
Handler<AsyncResult<Boolean>> resultHandler)
Adds specified key/value pair
|
ConsulClient |
ConsulClient.putValueWithOptions(String key,
String value,
KeyValueOptions options,
Handler<AsyncResult<Boolean>> resultHandler) |
ConsulClient |
ConsulClient.readAclToken(String accessorId,
Handler<AsyncResult<AclToken>> resultHandler)
Reads an ACL token with the given Accessor ID
|
ConsulClient |
ConsulClient.readPolicy(String id,
Handler<AsyncResult<AclPolicy>> resultHandler)
This endpoint reads an ACL policy with the given ID
|
ConsulClient |
ConsulClient.readPolicyByName(String name,
Handler<AsyncResult<AclPolicy>> resultHandler)
This endpoint reads an ACL policy with the given name
|
ConsulClient |
ConsulClient.registerCatalogService(Node nodeOptions,
ServiceOptions serviceOptions,
Handler<AsyncResult<Void>> resultHandler)
Register node with external service
|
ConsulClient |
ConsulClient.registerCheck(CheckOptions checkOptions,
Handler<AsyncResult<Void>> resultHandler)
Add a new check to the local agent.
|
ConsulClient |
ConsulClient.registerService(ServiceOptions serviceOptions,
Handler<AsyncResult<Void>> resultHandler)
Adds a new service, with an optional health check, to the local agent.
|
ConsulClient |
ConsulClient.renewSession(String id,
Handler<AsyncResult<Session>> resultHandler)
Renews the given session.
|
ConsulClient |
ConsulClient.transaction(TxnRequest request,
Handler<AsyncResult<TxnResponse>> resultHandler)
Manages multiple operations inside a single, atomic transaction.
|
ConsulClient |
ConsulClient.updateAclToken(AclToken token,
Handler<AsyncResult<String>> idHandler)
Deprecated.
|
ConsulClient |
ConsulClient.updateAclToken(String accessorId,
AclToken token,
Handler<AsyncResult<AclToken>> resultHandler)
Update an existing Acl token
|
ConsulClient |
ConsulClient.updateCheck(String checkId,
CheckStatus status,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to given status.
|
ConsulClient |
ConsulClient.updateCheckWithNote(String checkId,
CheckStatus status,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to given status.
|
ConsulClient |
ConsulClient.updatePolicy(String id,
AclPolicy policy,
Handler<AsyncResult<AclPolicy>> resultHandler)
This endpoint updates an existing ACL policy
|
ConsulClient |
ConsulClient.updatePreparedQuery(PreparedQueryDefinition definition,
Handler<AsyncResult<Void>> resultHandler) |
ConsulClient |
ConsulClient.warnCheck(String checkId,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "warning".
|
ConsulClient |
ConsulClient.warnCheckWithNote(String checkId,
String note,
Handler<AsyncResult<Void>> resultHandler)
Set status of the check to "warning".
|
| Modifier and Type | Method and Description |
|---|---|
void |
TcpEventBusBridge.close(Handler<AsyncResult<Void>> handler)
Close the current socket.
|
TcpEventBusBridge |
TcpEventBusBridge.listen(Handler<AsyncResult<TcpEventBusBridge>> handler)
Listen on default port 7000 with a handler to report the state of the socket listen operation.
|
TcpEventBusBridge |
TcpEventBusBridge.listen(int port,
Handler<AsyncResult<TcpEventBusBridge>> handler)
Listen on specific port
|
TcpEventBusBridge |
TcpEventBusBridge.listen(int port,
String address,
Handler<AsyncResult<TcpEventBusBridge>> handler)
Listen on specific port and bind to specific address
|
| Modifier and Type | Method and Description |
|---|---|
void |
HealthChecks.checkStatus(Handler<AsyncResult<CheckResult>> resultHandler)
Invokes the registered procedures.
|
void |
HealthChecks.checkStatus(String name,
Handler<AsyncResult<CheckResult>> resultHandler)
Invokes the registered procedure with the given name and sub-procedures.
|
HealthChecks |
HealthChecks.invoke(String name,
Handler<AsyncResult<JsonObject>> resultHandler)
Invokes the registered procedure with the given name and sub-procedures.
|
| Modifier and Type | Method and Description |
|---|---|
SQLOperations |
JDBCClient.querySingle(String sql,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement that returns a single SQL row.
|
SQLOperations |
JDBCClient.querySingleWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement with arguments that returns a single SQL row.
|
| Modifier and Type | Method and Description |
|---|---|
void |
MailClient.close(Handler<AsyncResult<Void>> closedHandler)
Close the MailClient
|
MailClient |
MailClient.sendMail(MailMessage email,
Handler<AsyncResult<MailResult>> resultHandler)
send a single mail via MailClient
|
| Modifier and Type | Method and Description |
|---|---|
MongoClient |
MongoClient.bulkWrite(String collection,
List<BulkOperation> operations,
Handler<AsyncResult<MongoClientBulkWriteResult>> resultHandler)
Execute a bulk operation.
|
MongoClient |
MongoClient.bulkWriteWithOptions(String collection,
List<BulkOperation> operations,
BulkWriteOptions bulkWriteOptions,
Handler<AsyncResult<MongoClientBulkWriteResult>> resultHandler)
Execute a bulk operation with the specified write options.
|
void |
MongoClient.close(Handler<AsyncResult<Void>> handler)
Close the client and release its resources
|
MongoClient |
MongoClient.count(String collection,
JsonObject query,
Handler<AsyncResult<Long>> resultHandler)
Count matching documents in a collection.
|
MongoClient |
MongoClient.countWithOptions(String collection,
JsonObject query,
CountOptions countOptions,
Handler<AsyncResult<Long>> resultHandler)
Count matching documents in a collection.
|
MongoClient |
MongoClient.createCollection(String collectionName,
Handler<AsyncResult<Void>> resultHandler)
Create a new collection
|
MongoClient |
MongoClient.createCollectionWithOptions(String collectionName,
CreateCollectionOptions collectionOptions,
Handler<AsyncResult<Void>> resultHandler)
Create a new collection with options
|
MongoClient |
MongoClient.createDefaultGridFsBucketService(Handler<AsyncResult<MongoGridFsClient>> resultHandler)
Creates a
MongoGridFsClient used to interact with Mongo GridFS. |
MongoClient |
MongoClient.createGridFsBucketService(String bucketName,
Handler<AsyncResult<MongoGridFsClient>> resultHandler)
Creates a
MongoGridFsClient used to interact with Mongo GridFS. |
MongoClient |
MongoClient.createIndex(String collection,
JsonObject key,
Handler<AsyncResult<Void>> resultHandler)
Creates an index.
|
MongoClient |
MongoClient.createIndexes(String collection,
List<IndexModel> indexes,
Handler<AsyncResult<Void>> resultHandler)
creates an indexes
|
MongoClient |
MongoClient.createIndexWithOptions(String collection,
JsonObject key,
IndexOptions options,
Handler<AsyncResult<Void>> resultHandler)
Creates an index.
|
MongoGridFsClient |
MongoGridFsClient.delete(String id,
Handler<AsyncResult<Void>> resultHandler)
Deletes a file by it's ID
|
MongoClient |
MongoClient.distinct(String collection,
String fieldName,
String resultClassname,
DistinctOptions distinctOptions,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name.
|
MongoClient |
MongoClient.distinct(String collection,
String fieldName,
String resultClassname,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name.
|
MongoClient |
MongoClient.distinctWithQuery(String collection,
String fieldName,
String resultClassname,
JsonObject query,
DistinctOptions distinctOptions,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name filtered by specified query.
|
MongoClient |
MongoClient.distinctWithQuery(String collection,
String fieldName,
String resultClassname,
JsonObject query,
Handler<AsyncResult<JsonArray>> resultHandler)
Gets the distinct values of the specified field name filtered by specified query.
|
MongoGridFsClient |
MongoGridFsClient.downloadByFileName(WriteStream<Buffer> stream,
String fileName,
Handler<AsyncResult<Long>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.downloadByFileNameWithOptions(WriteStream<Buffer> stream,
String fileName,
GridFsDownloadOptions options,
Handler<AsyncResult<Long>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.downloadById(WriteStream<Buffer> stream,
String id,
Handler<AsyncResult<Long>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.downloadFile(String fileName,
Handler<AsyncResult<Long>> resultHandler)
Downloads a file.
|
MongoGridFsClient |
MongoGridFsClient.downloadFileAs(String fileName,
String newFileName,
Handler<AsyncResult<Long>> resultHandler)
Downloads a file and gives it a new name.
|
MongoGridFsClient |
MongoGridFsClient.downloadFileByID(String id,
String fileName,
Handler<AsyncResult<Long>> resultHandler)
Downloads a file using the ID generated by GridFs.
|
MongoGridFsClient |
MongoGridFsClient.drop(Handler<AsyncResult<Void>> resultHandler)
Drops the entire file bucket with all of its contents
|
MongoClient |
MongoClient.dropCollection(String collection,
Handler<AsyncResult<Void>> resultHandler)
Drop a collection
|
MongoClient |
MongoClient.dropIndex(String collection,
String indexName,
Handler<AsyncResult<Void>> resultHandler)
Drops the index given its name.
|
MongoClient |
MongoClient.find(String collection,
JsonObject query,
Handler<AsyncResult<List<JsonObject>>> resultHandler)
Find matching documents in the specified collection
|
MongoGridFsClient |
MongoGridFsClient.findAllIds(Handler<AsyncResult<List<String>>> resultHandler)
Finds all file ids in the bucket
|
MongoGridFsClient |
MongoGridFsClient.findIds(JsonObject query,
Handler<AsyncResult<List<String>>> resultHandler)
Finds all file ids that match a query.
|
MongoClient |
MongoClient.findOne(String collection,
JsonObject query,
JsonObject fields,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection
|
MongoClient |
MongoClient.findOneAndDelete(String collection,
JsonObject query,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and delete it.
|
MongoClient |
MongoClient.findOneAndDeleteWithOptions(String collection,
JsonObject query,
FindOptions findOptions,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and delete it.
|
MongoClient |
MongoClient.findOneAndReplace(String collection,
JsonObject query,
JsonObject replace,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and replace it.
|
MongoClient |
MongoClient.findOneAndReplaceWithOptions(String collection,
JsonObject query,
JsonObject replace,
FindOptions findOptions,
UpdateOptions updateOptions,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and replace it.
|
MongoClient |
MongoClient.findOneAndUpdate(String collection,
JsonObject query,
JsonObject update,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and update it.
|
MongoClient |
MongoClient.findOneAndUpdateWithOptions(String collection,
JsonObject query,
JsonObject update,
FindOptions findOptions,
UpdateOptions updateOptions,
Handler<AsyncResult<JsonObject>> resultHandler)
Find a single matching document in the specified collection and update it.
|
MongoClient |
MongoClient.findWithOptions(String collection,
JsonObject query,
FindOptions options,
Handler<AsyncResult<List<JsonObject>>> resultHandler)
Find matching documents in the specified collection, specifying options
|
MongoClient |
MongoClient.getCollections(Handler<AsyncResult<List<String>>> resultHandler)
Get a list of all collections in the database.
|
MongoClient |
MongoClient.insert(String collection,
JsonObject document,
Handler<AsyncResult<String>> resultHandler)
Insert a document in the specified collection
|
MongoClient |
MongoClient.insertWithOptions(String collection,
JsonObject document,
WriteOption writeOption,
Handler<AsyncResult<String>> resultHandler)
Insert a document in the specified collection with the specified write option
|
MongoClient |
MongoClient.listIndexes(String collection,
Handler<AsyncResult<JsonArray>> resultHandler)
Get all the indexes in this collection.
|
MongoClient |
MongoClient.removeDocument(String collection,
JsonObject query,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove a single matching document from a collection and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.removeDocuments(String collection,
JsonObject query,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove matching documents from a collection and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.removeDocumentsWithOptions(String collection,
JsonObject query,
WriteOption writeOption,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove matching documents from a collection with the specified write option and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.removeDocumentWithOptions(String collection,
JsonObject query,
WriteOption writeOption,
Handler<AsyncResult<MongoClientDeleteResult>> resultHandler)
Remove a single matching document from a collection with the specified write option and return the handler with
MongoClientDeleteResult result |
MongoClient |
MongoClient.replaceDocuments(String collection,
JsonObject query,
JsonObject replace,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Replace matching documents in the specified collection and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.replaceDocumentsWithOptions(String collection,
JsonObject query,
JsonObject replace,
UpdateOptions options,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Replace matching documents in the specified collection, specifying options and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.runCommand(String commandName,
JsonObject command,
Handler<AsyncResult<JsonObject>> resultHandler)
Run an arbitrary MongoDB command.
|
MongoClient |
MongoClient.save(String collection,
JsonObject document,
Handler<AsyncResult<String>> resultHandler)
Save a document in the specified collection
|
MongoClient |
MongoClient.saveWithOptions(String collection,
JsonObject document,
WriteOption writeOption,
Handler<AsyncResult<String>> resultHandler)
Save a document in the specified collection with the specified write option
|
MongoClient |
MongoClient.updateCollection(String collection,
JsonObject query,
JsonArray update,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Use an aggregation pipeline to update documents in the specified collection and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.updateCollection(String collection,
JsonObject query,
JsonObject update,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Update matching documents in the specified collection and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.updateCollectionWithOptions(String collection,
JsonObject query,
JsonArray update,
UpdateOptions options,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Use an aggregation pipeline to update documents in the specified collection, specifying options and return the handler with
MongoClientUpdateResult result |
MongoClient |
MongoClient.updateCollectionWithOptions(String collection,
JsonObject query,
JsonObject update,
UpdateOptions options,
Handler<AsyncResult<MongoClientUpdateResult>> resultHandler)
Update matching documents in the specified collection, specifying options and return the handler with
MongoClientUpdateResult result |
MongoGridFsClient |
MongoGridFsClient.uploadByFileName(Observable<Buffer> stream,
String fileName,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadByFileName(ReadStream<Buffer> stream,
String fileName,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadByFileNameWithOptions(Observable<Buffer> stream,
String fileName,
GridFsUploadOptions options,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadByFileNameWithOptions(ReadStream<Buffer> stream,
String fileName,
GridFsUploadOptions options,
Handler<AsyncResult<String>> resultHandler) |
MongoGridFsClient |
MongoGridFsClient.uploadFile(String fileName,
Handler<AsyncResult<String>> resultHandler)
Upload a file to gridfs
|
MongoGridFsClient |
MongoGridFsClient.uploadFileWithOptions(String fileName,
GridFsUploadOptions options,
Handler<AsyncResult<String>> resultHandler)
Upload a file to gridfs with options
|
| Modifier and Type | Method and Description |
|---|---|
void |
ShellServer.close(Handler<AsyncResult<Void>> completionHandler)
Close the shell server, this is an asynchronous close.
|
ShellServer |
ShellServer.listen(Handler<AsyncResult<Void>> listenHandler)
Start the shell service, this is an asynchronous start.
|
void |
ShellService.start(Handler<AsyncResult<Void>> startHandler)
Start the shell service, this is an asynchronous start.
|
void |
ShellService.stop(Handler<AsyncResult<Void>> stopHandler)
Stop the shell service, this is an asynchronous start.
|
| Modifier and Type | Method and Description |
|---|---|
CommandRegistry |
CommandRegistry.registerCommand(Command command,
Handler<AsyncResult<Command>> completionHandler)
Register a command
|
CommandRegistry |
CommandRegistry.registerCommands(List<Command> commands,
Handler<AsyncResult<List<Command>>> completionHandler)
Register a list of commands.
|
CommandRegistry |
CommandRegistry.unregisterCommand(String commandName,
Handler<AsyncResult<Void>> completionHandler)
Unregister a command.
|
| Modifier and Type | Method and Description |
|---|---|
void |
TermServer.close(Handler<AsyncResult<Void>> completionHandler)
Like
TermServer.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but supplying a handler that will be notified when close is complete. |
TermServer |
TermServer.listen(Handler<AsyncResult<Void>> listenHandler)
Bind the term server, the
TermServer.termHandler(io.vertx.core.Handler<io.vertx.rxjava.ext.shell.term.Term>) must be set before. |
| Modifier and Type | Method and Description |
|---|---|
SQLConnection |
SQLConnection.batch(List<String> sqlStatements,
Handler<AsyncResult<List<Integer>>> handler)
Batch simple SQL strings and execute the batch where the async result contains a array of Integers.
|
SQLConnection |
SQLConnection.batchCallableWithParams(String sqlStatement,
List<JsonArray> inArgs,
List<JsonArray> outArgs,
Handler<AsyncResult<List<Integer>>> handler)
Batch a callable statement with all entries from the args list.
|
SQLConnection |
SQLConnection.batchWithParams(String sqlStatement,
List<JsonArray> args,
Handler<AsyncResult<List<Integer>>> handler)
Batch a prepared statement with all entries from the args list.
|
SQLConnection |
SQLConnection.call(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLClient |
SQLClient.call(String sql,
Handler<AsyncResult<ResultSet>> handler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLOperations |
SQLOperations.call(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLConnection |
SQLConnection.callWithParams(String sql,
JsonArray params,
JsonArray outputs,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLClient |
SQLClient.callWithParams(String sql,
JsonArray params,
JsonArray outputs,
Handler<AsyncResult<ResultSet>> handler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
SQLOperations |
SQLOperations.callWithParams(String sql,
JsonArray params,
JsonArray outputs,
Handler<AsyncResult<ResultSet>> resultHandler)
Calls the given SQL
PROCEDURE which returns the result from the procedure. |
void |
SQLRowStream.close(Handler<AsyncResult<Void>> handler)
Closes the stream/underlying cursor(s).
|
void |
SQLConnection.close(Handler<AsyncResult<Void>> handler)
Closes the connection.
|
void |
SQLClient.close(Handler<AsyncResult<Void>> handler)
Close the client and release all resources.
|
SQLConnection |
SQLConnection.commit(Handler<AsyncResult<Void>> handler)
Commits all changes made since the previous commit/rollback.
|
SQLConnection |
SQLConnection.execute(String sql,
Handler<AsyncResult<Void>> resultHandler)
Executes the given SQL statement
|
SQLClient |
SQLClient.getConnection(Handler<AsyncResult<SQLConnection>> handler)
Returns a connection that can be used to perform SQL operations on.
|
SQLConnection |
SQLConnection.getTransactionIsolation(Handler<AsyncResult<TransactionIsolation>> handler)
Attempts to return the transaction isolation level for this Connection object to the one given.
|
void |
SQLRowStream.pipeTo(WriteStream<JsonArray> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
SQLConnection |
SQLConnection.query(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT statement which returns the results of the query. |
SQLClient |
SQLClient.query(String sql,
Handler<AsyncResult<ResultSet>> handler)
Execute a single SQL statement, this method acquires a connection from the the pool and executes the SQL
statement and returns it back after the execution.
|
SQLOperations |
SQLOperations.query(String sql,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT statement which returns the results of the query. |
SQLOperations |
SQLConnection.querySingle(String sql,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement that returns a single SQL row.
|
SQLOperations |
SQLClient.querySingle(String sql,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement that returns a single SQL row.
|
SQLOperations |
SQLOperations.querySingle(String sql,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement that returns a single SQL row.
|
SQLOperations |
SQLConnection.querySingleWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement with arguments that returns a single SQL row.
|
SQLOperations |
SQLClient.querySingleWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement with arguments that returns a single SQL row.
|
SQLOperations |
SQLOperations.querySingleWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<JsonArray>> handler)
Execute a one shot SQL statement with arguments that returns a single SQL row.
|
SQLConnection |
SQLConnection.queryStream(String sql,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLClient |
SQLClient.queryStream(String sql,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLOperations |
SQLOperations.queryStream(String sql,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLConnection |
SQLConnection.queryStreamWithParams(String sql,
JsonArray params,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLClient |
SQLClient.queryStreamWithParams(String sql,
JsonArray params,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLOperations |
SQLOperations.queryStreamWithParams(String sql,
JsonArray params,
Handler<AsyncResult<SQLRowStream>> handler)
Executes the given SQL
SELECT statement which returns the results of the query as a read stream. |
SQLConnection |
SQLConnection.queryWithParams(String sql,
JsonArray params,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT prepared statement which returns the results of the query. |
SQLClient |
SQLClient.queryWithParams(String sql,
JsonArray arguments,
Handler<AsyncResult<ResultSet>> handler)
Execute a single SQL prepared statement, this method acquires a connection from the the pool and executes the SQL
prepared statement and returns it back after the execution.
|
SQLOperations |
SQLOperations.queryWithParams(String sql,
JsonArray params,
Handler<AsyncResult<ResultSet>> resultHandler)
Executes the given SQL
SELECT prepared statement which returns the results of the query. |
SQLConnection |
SQLConnection.rollback(Handler<AsyncResult<Void>> handler)
Rolls back all changes made since the previous commit/rollback.
|
SQLConnection |
SQLConnection.setAutoCommit(boolean autoCommit,
Handler<AsyncResult<Void>> resultHandler)
Sets the auto commit flag for this connection.
|
SQLConnection |
SQLConnection.setTransactionIsolation(TransactionIsolation isolation,
Handler<AsyncResult<Void>> handler)
Attempts to change the transaction isolation level for this Connection object to the one given.
|
SQLConnection |
SQLConnection.update(String sql,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given SQL statement which may be an
INSERT, UPDATE, or DELETE
statement. |
SQLClient |
SQLClient.update(String sql,
Handler<AsyncResult<UpdateResult>> handler)
Executes the given SQL statement which may be an
INSERT, UPDATE, or DELETE
statement. |
SQLOperations |
SQLOperations.update(String sql,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given SQL statement which may be an
INSERT, UPDATE, or DELETE
statement. |
SQLConnection |
SQLConnection.updateWithParams(String sql,
JsonArray params,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given prepared statement which may be an
INSERT, UPDATE, or DELETE
statement with the given parameters |
SQLClient |
SQLClient.updateWithParams(String sql,
JsonArray params,
Handler<AsyncResult<UpdateResult>> handler)
Executes the given prepared statement which may be an
INSERT, UPDATE, or DELETE
statement with the given parameters |
SQLOperations |
SQLOperations.updateWithParams(String sql,
JsonArray params,
Handler<AsyncResult<UpdateResult>> resultHandler)
Executes the given prepared statement which may be an
INSERT, UPDATE, or DELETE
statement with the given parameters |
| Modifier and Type | Method and Description |
|---|---|
StompClientConnection |
StompClientConnection.abort(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Aborts a transaction.
|
StompClientConnection |
StompClientConnection.abort(String id,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Aborts a transaction.
|
StompClientConnection |
StompClientConnection.ack(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Sends an acknowledgement for a specific message.
|
StompClientConnection |
StompClientConnection.ack(String id,
String txId,
Handler<AsyncResult<Frame>> receiptHandler)
Sends an acknowledgement for the given frame.
|
StompClientConnection |
StompClientConnection.beginTX(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Begins a transaction.
|
StompClientConnection |
StompClientConnection.beginTX(String id,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Begins a transaction.
|
void |
StompServer.close(Handler<AsyncResult<Void>> completionHandler)
Closes the server.
|
StompClientConnection |
StompClientConnection.commit(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Commits a transaction.
|
StompClientConnection |
StompClientConnection.commit(String id,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Commits a transaction.
|
StompClient |
StompClient.connect(Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server using the host and port configured in the client's options.
|
StompClient |
StompClient.connect(int port,
String host,
Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server.
|
StompClient |
StompClient.connect(int port,
String host,
NetClient net,
Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server.
|
StompClient |
StompClient.connect(NetClient net,
Handler<AsyncResult<StompClientConnection>> resultHandler)
Connects to the server.
|
StompClientConnection |
StompClientConnection.disconnect(Frame frame,
Handler<AsyncResult<Frame>> receiptHandler)
Disconnects the client.
|
StompClientConnection |
StompClientConnection.disconnect(Handler<AsyncResult<Frame>> receiptHandler)
Disconnects the client.
|
StompServer |
StompServer.listen(Handler<AsyncResult<StompServer>> handler)
Connects the STOMP server default port (61613) and network interface (
0.0.0.0). |
StompServer |
StompServer.listen(int port,
Handler<AsyncResult<StompServer>> handler)
Connects the STOMP server to the given port.
|
StompServer |
StompServer.listen(int port,
String host,
Handler<AsyncResult<StompServer>> handler)
Connects the STOMP server to the given port / interface.
|
StompClientConnection |
StompClientConnection.nack(String id,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a non-acknowledgement for the given message.
|
StompClientConnection |
StompClientConnection.nack(String id,
String txId,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a non-acknowledgement for the given frame.
|
StompServerHandler |
StompServerHandler.onAuthenticationRequest(StompServerConnection connection,
String login,
String passcode,
Handler<AsyncResult<Boolean>> handler)
Called when the client connects to a server requiring authentication.
|
StompClientConnection |
StompClientConnection.send(Frame frame,
Handler<AsyncResult<Frame>> receiptHandler)
Sends the given frame to the server.
|
StompClientConnection |
StompClientConnection.send(Map<String,String> headers,
Buffer body,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a
SEND frame to the server. |
StompClientConnection |
StompClientConnection.send(String destination,
Buffer body,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a
SEND frame to the server to the given destination. |
StompClientConnection |
StompClientConnection.send(String destination,
Map<String,String> headers,
Buffer body,
Handler<AsyncResult<Frame>> receiptHandler)
Sends a
SEND frame to the server to the given destination. |
StompClientConnection |
StompClientConnection.subscribe(String destination,
Handler<Frame> handler,
Handler<AsyncResult<String>> receiptHandler)
Subscribes to the given destination.
|
StompClientConnection |
StompClientConnection.subscribe(String destination,
Map<String,String> headers,
Handler<Frame> handler,
Handler<AsyncResult<String>> receiptHandler)
Subscribes to the given destination.
|
StompClientConnection |
StompClientConnection.unsubscribe(String destination,
Handler<AsyncResult<Frame>> receiptHandler)
Un-subscribes from the given destination.
|
StompClientConnection |
StompClientConnection.unsubscribe(String destination,
Map<String,String> headers,
Handler<AsyncResult<Frame>> receiptHandler)
Un-subscribes from the given destination.
|
| Modifier and Type | Method and Description |
|---|---|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertFailure()
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a failed result it completes the async operation.
When the returned handler is called back with a succeeded result it fails the test.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertFailure(Handler<Throwable> causeHandler)
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a failed result it completes the async operation.
When the returned handler is called back with a succeeded result it fails the test.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertSuccess()
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a succeeded result it completes the async operation.
When the returned handler is called back with a failed result it fails the test with the cause of the failure.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertSuccess(Handler<T> resultHandler)
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a succeeded result it invokes the
resultHandler argument
with the async result. |
| Modifier and Type | Method and Description |
|---|---|
void |
Completion.handler(Handler<AsyncResult<T>> completionHandler)
Completion handler to receive a completion signal when this completions completes.
|
void |
Async.handler(Handler<AsyncResult<Void>> completionHandler)
Completion handler to receive a completion signal when this completions completes.
|
void |
TestCompletion.handler(Handler<AsyncResult<Void>> completionHandler)
Completion handler to receive a completion signal when this completions completes.
|
| Modifier and Type | Method and Description |
|---|---|
void |
TestSuiteReport.pipeTo(WriteStream<TestCaseReport> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
| Modifier and Type | Method and Description |
|---|---|
int |
RoutingContext.addEndHandler(Handler<AsyncResult<Void>> handler)
Add an end handler for the request/response context.
|
RoutingContext |
RoutingContext.end(Buffer buffer,
Handler<AsyncResult<Void>> handler)
|
RoutingContext |
RoutingContext.end(Handler<AsyncResult<Void>> handler)
|
RoutingContext |
RoutingContext.end(String chunk,
Handler<AsyncResult<Void>> handler)
|
RoutingContext |
RoutingContext.json(Object json,
Handler<AsyncResult<Void>> handler)
|
RoutingContext |
RoutingContext.redirect(String url,
Handler<AsyncResult<Void>> handler)
|
| Modifier and Type | Method and Description |
|---|---|
static void |
OpenAPI3RouterFactory.create(Vertx vertx,
String url,
Handler<AsyncResult<OpenAPI3RouterFactory>> handler)
Deprecated.
|
static void |
OpenAPI3RouterFactory.create(Vertx vertx,
String url,
List<JsonObject> auth,
Handler<AsyncResult<OpenAPI3RouterFactory>> handler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
void |
TemplateEngine.render(JsonObject context,
String templateFileName,
Handler<AsyncResult<Buffer>> handler)
Render the template.
|
void |
TemplateEngine.render(Map<String,Object> context,
String templateFileName,
Handler<AsyncResult<Buffer>> handler)
Render the template.
|
| Modifier and Type | Method and Description |
|---|---|
SessionHandler |
SessionHandler.flush(RoutingContext ctx,
boolean ignoreStatus,
Handler<AsyncResult<Void>> handler)
Flush a context session earlier to the store, this will allow the end user to have full control on the event of
a failure at the store level.
|
SessionHandler |
SessionHandler.flush(RoutingContext ctx,
Handler<AsyncResult<Void>> handler)
Flush a context session earlier to the store, this will allow the end user to have full control on the event of
a failure at the store level.
|
SessionHandler |
SessionHandler.setUser(RoutingContext context,
User user,
Handler<AsyncResult<Void>> handler)
Set the user for the session
|
| Modifier and Type | Method and Description |
|---|---|
void |
SockJSSocket.end(Buffer data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
SockJSSocket.end(Handler<AsyncResult<Void>> handler)
Same as
SockJSSocket.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
SockJSSocket.pipeTo(WriteStream<Buffer> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
SockJSSocket.write(Buffer data,
Handler<AsyncResult<Void>> handler) |
void |
SockJSSocket.write(String data,
Handler<AsyncResult<Void>> handler) |
| Modifier and Type | Method and Description |
|---|---|
SessionStore |
SessionStore.clear(Handler<AsyncResult<Void>> resultHandler)
Remove all sessions from the store.
|
SessionStore |
SessionStore.delete(String id,
Handler<AsyncResult<Void>> resultHandler)
Delete the session with the specified ID.
|
SessionStore |
SessionStore.get(String cookieValue,
Handler<AsyncResult<Session>> resultHandler)
Get the session with the specified ID.
|
SessionStore |
SessionStore.put(Session session,
Handler<AsyncResult<Void>> resultHandler)
Add a session with the specified ID.
|
SessionStore |
SessionStore.size(Handler<AsyncResult<Integer>> resultHandler)
Get the number of sessions in the store.
|
| Modifier and Type | Method and Description |
|---|---|
void |
GrpcClientRequest.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
GrpcClientRequest.end(Req data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
GrpcClientResponse.pipeTo(WriteStream<Resp> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
GrpcClientRequest.write(Req data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
GrpcWriteStream.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
GrpcWriteStream.end(T data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
GrpcReadStream.pipeTo(WriteStream<T> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
GrpcWriteStream.write(T data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
GrpcServerResponse.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
GrpcServerResponse.end(Resp data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
void |
GrpcServerRequest.pipeTo(WriteStream<Req> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
GrpcServerResponse.write(Resp data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
SchemaRouter.resolveRef(JsonPointer pointer,
JsonPointer scope,
SchemaParser schemaParser,
Handler<AsyncResult<Schema>> handler)
Deprecated.
|
| Modifier and Type | Method and Description |
|---|---|
void |
KafkaAdminClient.close(Handler<AsyncResult<Void>> handler)
Close the admin client
|
void |
KafkaAdminClient.close(long timeout,
Handler<AsyncResult<Void>> handler)
Close the admin client
|
void |
KafkaAdminClient.createAcls(List<org.apache.kafka.common.acl.AclBinding> aclBindings,
Handler<AsyncResult<List<org.apache.kafka.common.acl.AclBinding>>> completionHandler)
Create the ACL rules.
|
void |
KafkaAdminClient.createPartitions(Map<String,NewPartitions> partitions,
Handler<AsyncResult<Void>> completionHandler)
Creates a batch of new partitions in the Kafka topic
|
void |
KafkaAdminClient.createTopics(List<NewTopic> topics,
Handler<AsyncResult<Void>> completionHandler)
Creates a batch of new Kafka topics
|
void |
KafkaAdminClient.deleteAcls(List<org.apache.kafka.common.acl.AclBindingFilter> aclBindings,
Handler<AsyncResult<List<org.apache.kafka.common.acl.AclBinding>>> completionHandler)
Delete the ACL rules.
|
void |
KafkaAdminClient.deleteConsumerGroupOffsets(String groupId,
Set<TopicPartition> partitions,
Handler<AsyncResult<Void>> completionHandler)
Delete committed offsets for a set of partitions in a consumer group.
|
void |
KafkaAdminClient.deleteConsumerGroups(List<String> groupIds,
Handler<AsyncResult<Void>> completionHandler)
Delete consumer groups from the cluster.
|
void |
KafkaAdminClient.deleteTopics(List<String> topicNames,
Handler<AsyncResult<Void>> completionHandler)
Deletes a batch of Kafka topics
|
void |
KafkaAdminClient.describeAcls(org.apache.kafka.common.acl.AclBindingFilter aclBindingFilter,
Handler<AsyncResult<List<org.apache.kafka.common.acl.AclBinding>>> completionHandler)
Describe the ACL rules.
|
void |
KafkaAdminClient.describeCluster(DescribeClusterOptions options,
Handler<AsyncResult<ClusterDescription>> completionHandler)
Like
KafkaAdminClient.describeCluster(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.kafka.admin.ClusterDescription>>) but allows customized options. |
void |
KafkaAdminClient.describeCluster(Handler<AsyncResult<ClusterDescription>> completionHandler)
Describe the nodes in the cluster with the default options
|
void |
KafkaAdminClient.describeConsumerGroups(List<String> groupIds,
DescribeConsumerGroupsOptions options,
Handler<AsyncResult<Map<String,ConsumerGroupDescription>>> completionHandler)
|
void |
KafkaAdminClient.describeConsumerGroups(List<String> groupIds,
Handler<AsyncResult<Map<String,ConsumerGroupDescription>>> completionHandler)
Describe some group ids in the cluster, with the default options
|
void |
KafkaAdminClient.describeTopics(List<String> topicNames,
DescribeTopicsOptions options,
Handler<AsyncResult<Map<String,TopicDescription>>> completionHandler)
|
void |
KafkaAdminClient.describeTopics(List<String> topicNames,
Handler<AsyncResult<Map<String,TopicDescription>>> completionHandler)
Describe some topics in the cluster, with the default options.
|
void |
KafkaAdminClient.listConsumerGroups(Handler<AsyncResult<List<ConsumerGroupListing>>> completionHandler)
Get the the consumer groups available in the cluster with the default options
|
void |
KafkaAdminClient.listTopics(Handler<AsyncResult<Set<String>>> completionHandler)
List the topics available in the cluster with the default options.
|
| Modifier and Type | Method and Description |
|---|---|
KafkaConsumer<K,V> |
KafkaConsumer.assign(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Manually assign a list of partition to this consumer.
|
KafkaConsumer<K,V> |
KafkaConsumer.assign(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Manually assign a partition to this consumer.
|
KafkaConsumer<K,V> |
KafkaConsumer.assignment(Handler<AsyncResult<Set<TopicPartition>>> handler)
Get the set of partitions currently assigned to this consumer.
|
void |
KafkaConsumer.beginningOffsets(TopicPartition topicPartition,
Handler<AsyncResult<Long>> handler)
Get the first offset for the given partitions.
|
void |
KafkaConsumer.close(Handler<AsyncResult<Void>> completionHandler)
Close the consumer
|
void |
KafkaConsumer.commit(Handler<AsyncResult<Void>> completionHandler)
Commit current offsets for all the subscribed list of topics and partition.
|
void |
KafkaConsumer.committed(TopicPartition topicPartition,
Handler<AsyncResult<OffsetAndMetadata>> handler)
Get the last committed offset for the given partition (whether the commit happened by this process or another).
|
void |
KafkaConsumer.endOffsets(TopicPartition topicPartition,
Handler<AsyncResult<Long>> handler)
Get the last offset for the given partition.
|
void |
KafkaConsumer.offsetsForTimes(TopicPartition topicPartition,
Long timestamp,
Handler<AsyncResult<OffsetAndTimestamp>> handler)
Look up the offset for the given partition by timestamp.
|
KafkaConsumer<K,V> |
KafkaConsumer.partitionsFor(String topic,
Handler<AsyncResult<List<PartitionInfo>>> handler)
Get metadata about the partitions for a given topic.
|
KafkaConsumer<K,V> |
KafkaConsumer.pause(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Suspend fetching from the requested partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.pause(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Suspend fetching from the requested partition.
|
void |
KafkaConsumer.paused(Handler<AsyncResult<Set<TopicPartition>>> handler)
Get the set of partitions that were previously paused by a call to pause(Set).
|
void |
KafkaConsumer.pipeTo(WriteStream<KafkaConsumerRecord<K,V>> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
KafkaConsumer.poll(java.time.Duration timeout,
Handler<AsyncResult<KafkaConsumerRecords<K,V>>> handler)
Executes a poll for getting messages from Kafka.
|
void |
KafkaConsumer.position(TopicPartition partition,
Handler<AsyncResult<Long>> handler)
Get the offset of the next record that will be fetched (if a record with that offset exists).
|
KafkaConsumer<K,V> |
KafkaConsumer.resume(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Resume specified partitions which have been paused with pause.
|
KafkaConsumer<K,V> |
KafkaConsumer.resume(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Resume specified partition which have been paused with pause.
|
KafkaConsumer<K,V> |
KafkaConsumer.seek(TopicPartition topicPartition,
long offset,
Handler<AsyncResult<Void>> completionHandler)
Overrides the fetch offsets that the consumer will use on the next poll.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToBeginning(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Seek to the first offset for each of the given partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToBeginning(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Seek to the first offset for each of the given partition.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToEnd(Set<TopicPartition> topicPartitions,
Handler<AsyncResult<Void>> completionHandler)
Seek to the last offset for each of the given partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.seekToEnd(TopicPartition topicPartition,
Handler<AsyncResult<Void>> completionHandler)
Seek to the last offset for each of the given partition.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscribe(Set<String> topics,
Handler<AsyncResult<Void>> completionHandler)
Subscribe to the given list of topics to get dynamically assigned partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscribe(String topic,
Handler<AsyncResult<Void>> completionHandler)
Subscribe to the given topic to get dynamically assigned partitions.
|
KafkaConsumer<K,V> |
KafkaConsumer.subscription(Handler<AsyncResult<Set<String>>> handler)
Get the current subscription.
|
KafkaConsumer<K,V> |
KafkaConsumer.unsubscribe(Handler<AsyncResult<Void>> completionHandler)
Unsubscribe from topics currently subscribed with subscribe.
|
| Modifier and Type | Method and Description |
|---|---|
KafkaProducer<K,V> |
KafkaProducer.abortTransaction(Handler<AsyncResult<Void>> handler)
Aborts the ongoing transaction.
|
KafkaProducer<K,V> |
KafkaProducer.beginTransaction(Handler<AsyncResult<Void>> handler)
Starts a new kafka transaction.
|
void |
KafkaProducer.close(Handler<AsyncResult<Void>> completionHandler)
Close the producer
|
void |
KafkaProducer.close(long timeout,
Handler<AsyncResult<Void>> completionHandler)
Close the producer
|
KafkaProducer<K,V> |
KafkaProducer.commitTransaction(Handler<AsyncResult<Void>> handler)
Commits the ongoing transaction.
|
void |
KafkaProducer.end(Handler<AsyncResult<Void>> handler)
Same as
WriteStream.end(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with an handler called when the operation completes |
void |
KafkaProducer.end(KafkaProducerRecord<K,V> data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
KafkaProducer<K,V> |
KafkaProducer.flush(Handler<AsyncResult<Void>> completionHandler)
Invoking this method makes all buffered records immediately available to write
|
KafkaProducer<K,V> |
KafkaProducer.initTransactions(Handler<AsyncResult<Void>> handler)
Initializes the underlying kafka transactional producer.
|
KafkaProducer<K,V> |
KafkaProducer.partitionsFor(String topic,
Handler<AsyncResult<List<PartitionInfo>>> handler)
Get the partition metadata for the give topic.
|
KafkaProducer<K,V> |
KafkaProducer.send(KafkaProducerRecord<K,V> record,
Handler<AsyncResult<RecordMetadata>> handler)
Asynchronously write a record to a topic
|
void |
KafkaProducer.write(KafkaProducerRecord<K,V> data,
Handler<AsyncResult<Void>> handler)
Same as but with an
handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
void |
MqttServer.close(Handler<AsyncResult<Void>> completionHandler)
Close the server supplying an handler that will be called when the server is actually closed (or has failed).
|
MqttClient |
MqttClient.connect(int port,
String host,
Handler<AsyncResult<MqttConnAckMessage>> connectHandler)
Connects to an MQTT server calling connectHandler after connection
|
MqttClient |
MqttClient.connect(int port,
String host,
String serverName,
Handler<AsyncResult<MqttConnAckMessage>> connectHandler)
Connects to an MQTT server calling connectHandler after connection
|
MqttClient |
MqttClient.disconnect(Handler<AsyncResult<Void>> disconnectHandler)
Disconnects from the MQTT server calling disconnectHandler after disconnection
|
MqttServer |
MqttServer.listen(Handler<AsyncResult<MqttServer>> listenHandler)
Start the server listening for incoming connections using the specified options
through the constructor
|
MqttServer |
MqttServer.listen(int port,
Handler<AsyncResult<MqttServer>> listenHandler)
Start the server listening for incoming connections on the port specified but on
"0.0.0.0" as host.
|
MqttServer |
MqttServer.listen(int port,
String host,
Handler<AsyncResult<MqttServer>> listenHandler)
Start the server listening for incoming connections on the port and host specified
It ignores any options specified through the constructor
|
MqttClient |
MqttClient.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server
|
MqttEndpoint |
MqttEndpoint.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server
|
MqttEndpoint |
MqttEndpoint.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
int messageId,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server explicitly specifying the messageId
|
MqttEndpoint |
MqttEndpoint.publish(String topic,
Buffer payload,
MqttQoS qosLevel,
boolean isDup,
boolean isRetain,
int messageId,
MqttProperties properties,
Handler<AsyncResult<Integer>> publishSentHandler)
Sends the PUBLISH message to the remote MQTT server explicitly specifying the messageId
|
MqttClient |
MqttClient.subscribe(Map<String,Integer> topics,
Handler<AsyncResult<Integer>> subscribeSentHandler)
Subscribes to the topic and adds a handler which will be called after the request is sent
|
MqttClient |
MqttClient.subscribe(String topic,
int qos,
Handler<AsyncResult<Integer>> subscribeSentHandler)
Subscribes to the topic with a specified QoS level
|
MqttClient |
MqttClient.unsubscribe(List<String> topics,
Handler<AsyncResult<Integer>> unsubscribeSentHandler)
Unsubscribe from receiving messages on given topics
|
MqttClient |
MqttClient.unsubscribe(String topic,
Handler<AsyncResult<Integer>> unsubscribeSentHandler)
Unsubscribe from receiving messages on given topic
|
| Modifier and Type | Method and Description |
|---|---|
static void |
MSSQLConnection.connect(Vertx vertx,
MSSQLConnectOptions connectOptions,
Handler<AsyncResult<MSSQLConnection>> handler)
Create a connection to SQL Server with the given
connectOptions. |
static void |
MSSQLConnection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<MSSQLConnection>> handler)
|
MSSQLConnection |
MSSQLConnection.prepare(String s,
Handler<AsyncResult<PreparedStatement>> handler) |
| Modifier and Type | Method and Description |
|---|---|
MySQLConnection |
MySQLConnection.changeUser(MySQLAuthOptions options,
Handler<AsyncResult<Void>> handler)
Send a CHANGE_USER command to change the user of the current connection, this operation will also reset connection state.
|
static void |
MySQLConnection.connect(Vertx vertx,
MySQLConnectOptions connectOptions,
Handler<AsyncResult<MySQLConnection>> handler)
Create a connection to MySQL server with the given
connectOptions. |
static void |
MySQLConnection.connect(Vertx vertx,
String connectionUri,
Handler<AsyncResult<MySQLConnection>> handler)
|
MySQLConnection |
MySQLConnection.debug(Handler<AsyncResult<Void>> handler)
Send a DEBUG command to dump debug information to the server's stdout.
|
MySQLConnection |
MySQLConnection.getInternalStatistics(Handler<AsyncResult<String>> handler)
Send a STATISTICS command to get a human readable string of the server internal status.
|
MySQLConnection |
MySQLConnection.ping(Handler<AsyncResult<Void>> handler)
Send a PING command to check if the server is alive.
|
MySQLConnection |
MySQLConnection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler) |
MySQLConnection |
MySQLConnection.resetConnection(Handler<AsyncResult<Void>> handler)
Send a RESET_CONNECTION command to reset the session state.
|
MySQLConnection |
MySQLConnection.setOption(MySQLSetOption option,
Handler<AsyncResult<Void>> handler)
Send a SET_OPTION command to set options for the current connection.
|
MySQLConnection |
MySQLConnection.specifySchema(String schemaName,
Handler<AsyncResult<Void>> handler)
Send a INIT_DB command to change the default schema of the connection.
|
| Modifier and Type | Method and Description |
|---|---|
static void |
OracleConnection.connect(Vertx vertx,
io.vertx.oracleclient.OracleConnectOptions connectOptions,
Handler<AsyncResult<OracleConnection>> handler)
Create a connection to Oracle with the given
connectOptions. |
OracleConnection |
OracleConnection.prepare(String s,
Handler<AsyncResult<PreparedStatement>> handler) |
| Modifier and Type | Method and Description |
|---|---|
void |
PgSubscriber.close(Handler<AsyncResult<Void>> handler)
Close the subscriber, the retry policy will not be invoked.
|
PgSubscriber |
PgSubscriber.connect(Handler<AsyncResult<Void>> handler)
Connect the subscriber to Postgres.
|
void |
PgChannel.pipeTo(WriteStream<String> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
| Modifier and Type | Method and Description |
|---|---|
void |
RabbitMQClient.addConfirmListener(int maxQueueSize,
Handler<AsyncResult<ReadStream<RabbitMQConfirmation>>> resultHandler)
Add a Confirm Listener to the channel.
|
void |
RabbitMQClient.basicAck(long deliveryTag,
boolean multiple,
Handler<AsyncResult<Void>> resultHandler)
Acknowledge one or several received messages.
|
void |
RabbitMQClient.basicConsumer(String queue,
Handler<AsyncResult<RabbitMQConsumer>> resultHandler) |
void |
RabbitMQClient.basicConsumer(String queue,
QueueOptions options,
Handler<AsyncResult<RabbitMQConsumer>> resultHandler)
Create a consumer with the given
options. |
void |
RabbitMQClient.basicGet(String queue,
boolean autoAck,
Handler<AsyncResult<RabbitMQMessage>> resultHandler)
Retrieve a message from a queue using AMQP.Basic.Get
|
void |
RabbitMQClient.basicNack(long deliveryTag,
boolean multiple,
boolean requeue,
Handler<AsyncResult<Void>> resultHandler)
Reject one or several received messages.
|
void |
RabbitMQClient.basicPublish(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQClient.basicPublish(String exchange,
String routingKey,
Buffer body,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQClient.basicPublishWithDeliveryTag(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<Long> deliveryTagHandler,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQClient.basicQos(int prefetchCount,
boolean global,
Handler<AsyncResult<Void>> resultHandler)
Request a specific prefetchCount "quality of service" settings
for this channel.
|
void |
RabbitMQClient.basicQos(int prefetchCount,
Handler<AsyncResult<Void>> resultHandler)
Request a specific prefetchCount "quality of service" settings
for this channel.
|
void |
RabbitMQClient.basicQos(int prefetchSize,
int prefetchCount,
boolean global,
Handler<AsyncResult<Void>> resultHandler)
Request specific "quality of service" settings.
|
void |
RabbitMQConsumer.cancel(Handler<AsyncResult<Void>> cancelResult)
Stop message consumption from a queue.
|
void |
RabbitMQClient.confirmSelect(Handler<AsyncResult<Void>> resultHandler)
Enables publisher acknowledgements on this channel.
|
void |
RabbitMQClient.exchangeBind(String destination,
String source,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Bind an exchange to an exchange.
|
void |
RabbitMQClient.exchangeBind(String destination,
String source,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Bind an exchange to an exchange.
|
void |
RabbitMQClient.exchangeDeclare(String exchange,
String type,
boolean durable,
boolean autoDelete,
Handler<AsyncResult<Void>> resultHandler)
Declare an exchange.
|
void |
RabbitMQClient.exchangeDeclare(String exchange,
String type,
boolean durable,
boolean autoDelete,
JsonObject config,
Handler<AsyncResult<Void>> resultHandler)
Declare an exchange with additional parameters such as dead lettering, an alternate exchange or TTL.
|
void |
RabbitMQClient.exchangeDelete(String exchange,
Handler<AsyncResult<Void>> resultHandler)
Delete an exchange, without regard for whether it is in use or not.
|
void |
RabbitMQClient.exchangeUnbind(String destination,
String source,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Unbind an exchange from an exchange.
|
void |
RabbitMQClient.exchangeUnbind(String destination,
String source,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Unbind an exchange from an exchange.
|
void |
RabbitMQClient.messageCount(String queue,
Handler<AsyncResult<Long>> resultHandler)
Returns the number of messages in a queue ready to be delivered.
|
void |
RabbitMQConsumer.pipeTo(WriteStream<RabbitMQMessage> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
void |
RabbitMQPublisher.publish(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<AsyncResult<Void>> resultHandler)
Publish a message.
|
void |
RabbitMQPublisher.publishConfirm(String exchange,
String routingKey,
com.rabbitmq.client.BasicProperties properties,
Buffer body,
Handler<AsyncResult<Long>> resultHandler)
Publish a message and complete when publish confirm has returned.
|
void |
RabbitMQClient.queueBind(String queue,
String exchange,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Bind a queue to an exchange
|
void |
RabbitMQClient.queueBind(String queue,
String exchange,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Bind a queue to an exchange
|
void |
RabbitMQClient.queueDeclare(String queue,
boolean durable,
boolean exclusive,
boolean autoDelete,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeclareOk>> resultHandler)
Declare a queue
|
void |
RabbitMQClient.queueDeclare(String queue,
boolean durable,
boolean exclusive,
boolean autoDelete,
JsonObject config,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeclareOk>> resultHandler)
Declare a queue with config options
|
void |
RabbitMQClient.queueDeclareAuto(Handler<AsyncResult<JsonObject>> resultHandler)
Actively declare a server-named exclusive, autodelete, non-durable queue.
|
void |
RabbitMQClient.queueDelete(String queue,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeleteOk>> resultHandler)
Delete a queue, without regard for whether it is in use or has messages on it
|
void |
RabbitMQClient.queueDeleteIf(String queue,
boolean ifUnused,
boolean ifEmpty,
Handler<AsyncResult<com.rabbitmq.client.AMQP.Queue.DeleteOk>> resultHandler)
Delete a queue
|
void |
RabbitMQClient.queueUnbind(String queue,
String exchange,
String routingKey,
Handler<AsyncResult<Void>> resultHandler)
Unbind a queue from an exchange
|
void |
RabbitMQClient.queueUnbind(String queue,
String exchange,
String routingKey,
Map<String,Object> arguments,
Handler<AsyncResult<Void>> resultHandler)
Unbind a queue from an exchange
|
void |
RabbitMQClient.restartConnect(int attempts,
Handler<AsyncResult<Void>> resultHandler)
restart the rabbitMQ connect.
|
void |
RabbitMQClient.start(Handler<AsyncResult<Void>> resultHandler)
Start the rabbitMQ client.
|
void |
RabbitMQPublisher.start(Handler<AsyncResult<Void>> resultHandler)
Start the rabbitMQ publisher.
|
void |
RabbitMQClient.stop(Handler<AsyncResult<Void>> resultHandler)
Stop the rabbitMQ client.
|
void |
RabbitMQPublisher.stop(Handler<AsyncResult<Void>> resultHandler)
Stop the rabbitMQ publisher.
|
void |
RabbitMQClient.waitForConfirms(Handler<AsyncResult<Void>> resultHandler)
Wait until all messages published since the last call have been either ack'd or nack'd by the broker.
|
void |
RabbitMQClient.waitForConfirms(long timeout,
Handler<AsyncResult<Void>> resultHandler)
Wait until all messages published since the last call have been either ack'd or nack'd by the broker; or until timeout elapses.
|
| Modifier and Type | Method and Description |
|---|---|
RedisAPI |
RedisAPI.acl(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for Access List Control commands.
|
RedisAPI |
RedisAPI.append(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Append a value to a key.
|
RedisAPI |
RedisAPI.asking(Handler<AsyncResult<Response>> handler)
Sent by cluster clients after an -ASK redirect.
|
RedisAPI |
RedisAPI.auth(List<String> args,
Handler<AsyncResult<Response>> handler)
Authenticate to the server.
|
Redis |
Redis.batch(List<Request> commands,
Handler<AsyncResult<List<Response>>> onSend)
Sends a list of commands in a single IO operation, this prevents any inter twinning to happen from other
client users.
|
RedisConnection |
RedisConnection.batch(List<Request> commands,
Handler<AsyncResult<List<Response>>> onSend)
Sends a list of commands in a single IO operation, this prevents any inter twinning to happen from other
client users.
|
RedisAPI |
RedisAPI.bfAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.ADD.
|
RedisAPI |
RedisAPI.bfCard(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.CARD.
|
RedisAPI |
RedisAPI.bfDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.DEBUG.
|
RedisAPI |
RedisAPI.bfExists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.EXISTS.
|
RedisAPI |
RedisAPI.bfInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.INFO.
|
RedisAPI |
RedisAPI.bfInsert(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.INSERT.
|
RedisAPI |
RedisAPI.bfLoadchunk(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.LOADCHUNK.
|
RedisAPI |
RedisAPI.bfMadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.MADD.
|
RedisAPI |
RedisAPI.bfMexists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.MEXISTS.
|
RedisAPI |
RedisAPI.bfReserve(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.RESERVE.
|
RedisAPI |
RedisAPI.bfScandump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command BF.SCANDUMP.
|
RedisAPI |
RedisAPI.bgrewriteaof(Handler<AsyncResult<Response>> handler)
Asynchronously rewrite the append-only file.
|
RedisAPI |
RedisAPI.bgsave(List<String> args,
Handler<AsyncResult<Response>> handler)
Asynchronously save the dataset to disk.
|
RedisAPI |
RedisAPI.bitcount(List<String> args,
Handler<AsyncResult<Response>> handler)
Count set bits in a string.
|
RedisAPI |
RedisAPI.bitfield(List<String> args,
Handler<AsyncResult<Response>> handler)
Perform arbitrary bitfield integer operations on strings.
|
RedisAPI |
RedisAPI.bitfieldRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Perform arbitrary bitfield integer operations on strings.
|
RedisAPI |
RedisAPI.bitop(List<String> args,
Handler<AsyncResult<Response>> handler)
Perform bitwise operations between strings.
|
RedisAPI |
RedisAPI.bitpos(List<String> args,
Handler<AsyncResult<Response>> handler)
Find first bit set or clear in a string.
|
RedisAPI |
RedisAPI.blmove(String arg0,
String arg1,
String arg2,
String arg3,
String arg4,
Handler<AsyncResult<Response>> handler)
Pop an element from a list, push it to another list and return it; or block until one is available.
|
RedisAPI |
RedisAPI.blmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Pop elements from a list, or block until one is available.
|
RedisAPI |
RedisAPI.blpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the first element in a list, or block until one is available.
|
RedisAPI |
RedisAPI.brpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the last element in a list, or block until one is available.
|
RedisAPI |
RedisAPI.brpoplpush(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Pop an element from a list, push it to another list and return it; or block until one is available.
|
RedisAPI |
RedisAPI.bzmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with scores in a sorted set or block until one is available.
|
RedisAPI |
RedisAPI.bzpopmax(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return the member with the highest score from one or more sorted sets, or block until one is available.
|
RedisAPI |
RedisAPI.bzpopmin(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return the member with the lowest score from one or more sorted sets, or block until one is available.
|
RedisAPI |
RedisAPI.cfAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.ADD.
|
RedisAPI |
RedisAPI.cfAddnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.ADDNX.
|
RedisAPI |
RedisAPI.cfCompact(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.COMPACT.
|
RedisAPI |
RedisAPI.cfCount(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.COUNT.
|
RedisAPI |
RedisAPI.cfDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.DEBUG.
|
RedisAPI |
RedisAPI.cfDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.DEL.
|
RedisAPI |
RedisAPI.cfExists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.EXISTS.
|
RedisAPI |
RedisAPI.cfInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.INFO.
|
RedisAPI |
RedisAPI.cfInsert(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.INSERT.
|
RedisAPI |
RedisAPI.cfInsertnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.INSERTNX.
|
RedisAPI |
RedisAPI.cfLoadchunk(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.LOADCHUNK.
|
RedisAPI |
RedisAPI.cfMexists(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.MEXISTS.
|
RedisAPI |
RedisAPI.cfReserve(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.RESERVE.
|
RedisAPI |
RedisAPI.cfScandump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CF.SCANDUMP.
|
RedisAPI |
RedisAPI.client(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for client connection commands.
|
RedisConnection |
RedisConnection.close(Handler<AsyncResult<Void>> onClose)
Closes the connection or returns to the pool.
|
RedisAPI |
RedisAPI.cluster(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for cluster commands.
|
RedisAPI |
RedisAPI.cmsIncrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INCRBY.
|
RedisAPI |
RedisAPI.cmsInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INFO.
|
RedisAPI |
RedisAPI.cmsInitbydim(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INITBYDIM.
|
RedisAPI |
RedisAPI.cmsInitbyprob(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.INITBYPROB.
|
RedisAPI |
RedisAPI.cmsMerge(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.MERGE.
|
RedisAPI |
RedisAPI.cmsQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command CMS.QUERY.
|
RedisAPI |
RedisAPI.command(List<String> args,
Handler<AsyncResult<Response>> handler)
Get array of Redis command details.
|
RedisAPI |
RedisAPI.config(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for server configuration commands.
|
Redis |
Redis.connect(Handler<AsyncResult<RedisConnection>> handler)
Connects to the redis server.
|
RedisAPI |
RedisAPI.copy(List<String> args,
Handler<AsyncResult<Response>> handler)
Copy a key.
|
RedisAPI |
RedisAPI.dbsize(Handler<AsyncResult<Response>> handler)
Return the number of keys in the selected database.
|
RedisAPI |
RedisAPI.debug(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for debugging commands.
|
RedisAPI |
RedisAPI.decr(String arg0,
Handler<AsyncResult<Response>> handler)
Decrement the integer value of a key by one.
|
RedisAPI |
RedisAPI.decrby(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Decrement the integer value of a key by the given number.
|
RedisAPI |
RedisAPI.del(List<String> args,
Handler<AsyncResult<Response>> handler)
Delete a key.
|
RedisAPI |
RedisAPI.discard(Handler<AsyncResult<Response>> handler)
Discard all commands issued after MULTI.
|
RedisAPI |
RedisAPI.dump(String arg0,
Handler<AsyncResult<Response>> handler)
Return a serialized version of the value stored at the specified key.
|
RedisAPI |
RedisAPI.echo(String arg0,
Handler<AsyncResult<Response>> handler)
Echo the given string.
|
RedisAPI |
RedisAPI.eval(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a Lua script server side.
|
RedisAPI |
RedisAPI.evalRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a read-only Lua script server side.
|
RedisAPI |
RedisAPI.evalsha(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a Lua script server side.
|
RedisAPI |
RedisAPI.evalshaRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Execute a read-only Lua script server side.
|
RedisAPI |
RedisAPI.exec(Handler<AsyncResult<Response>> handler)
Execute all commands issued after MULTI.
|
RedisAPI |
RedisAPI.exists(List<String> args,
Handler<AsyncResult<Response>> handler)
Determine if a key exists.
|
RedisAPI |
RedisAPI.expire(List<String> args,
Handler<AsyncResult<Response>> handler)
Set a key's time to live in seconds.
|
RedisAPI |
RedisAPI.expireat(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the expiration for a key as a UNIX timestamp.
|
RedisAPI |
RedisAPI.expiretime(String arg0,
Handler<AsyncResult<Response>> handler)
Get the expiration Unix timestamp for a key.
|
RedisAPI |
RedisAPI.failover(List<String> args,
Handler<AsyncResult<Response>> handler)
Start a coordinated failover between this server and one of its replicas.
|
RedisAPI |
RedisAPI.fcall(List<String> args,
Handler<AsyncResult<Response>> handler)
Invoke a function.
|
RedisAPI |
RedisAPI.fcallRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Invoke a read-only function.
|
RedisAPI |
RedisAPI.flushall(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove all keys from all databases.
|
RedisAPI |
RedisAPI.flushdb(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove all keys from the current database.
|
RedisAPI |
RedisAPI.ftAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ADD.
|
RedisAPI |
RedisAPI.ftAggregate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.AGGREGATE.
|
RedisAPI |
RedisAPI.ftAliasadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALIASADD.
|
RedisAPI |
RedisAPI.ftAliasaddifnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._ALIASADDIFNX.
|
RedisAPI |
RedisAPI.ftAliasdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALIASDEL.
|
RedisAPI |
RedisAPI.ftAliasdelifx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._ALIASDELIFX.
|
RedisAPI |
RedisAPI.ftAliasupdate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALIASUPDATE.
|
RedisAPI |
RedisAPI.ftAlter(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.ALTER.
|
RedisAPI |
RedisAPI.ftAlterifnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._ALTERIFNX.
|
RedisAPI |
RedisAPI.ftConfig(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.CONFIG.
|
RedisAPI |
RedisAPI.ftCreate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.CREATE.
|
RedisAPI |
RedisAPI.ftCreateifnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._CREATEIFNX.
|
RedisAPI |
RedisAPI.ftCursor(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.CURSOR.
|
RedisAPI |
RedisAPI.ftDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DEBUG.
|
RedisAPI |
RedisAPI.ftDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DEL.
|
RedisAPI |
RedisAPI.ftDictadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DICTADD.
|
RedisAPI |
RedisAPI.ftDictdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DICTDEL.
|
RedisAPI |
RedisAPI.ftDictdump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DICTDUMP.
|
RedisAPI |
RedisAPI.ftDrop(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DROP.
|
RedisAPI |
RedisAPI.ftDropifx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._DROPIFX.
|
RedisAPI |
RedisAPI.ftDropindex(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.DROPINDEX.
|
RedisAPI |
RedisAPI.ftDropindexifx(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._DROPINDEXIFX.
|
RedisAPI |
RedisAPI.ftExplain(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.EXPLAIN.
|
RedisAPI |
RedisAPI.ftExplaincli(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.EXPLAINCLI.
|
RedisAPI |
RedisAPI.ftGet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.GET.
|
RedisAPI |
RedisAPI.ftInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.INFO.
|
RedisAPI |
RedisAPI.ftList(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT._LIST.
|
RedisAPI |
RedisAPI.ftMget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.MGET.
|
RedisAPI |
RedisAPI.ftProfile(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.PROFILE.
|
RedisAPI |
RedisAPI.ftSafeadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SAFEADD.
|
RedisAPI |
RedisAPI.ftSearch(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SEARCH.
|
RedisAPI |
RedisAPI.ftSpellcheck(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SPELLCHECK.
|
RedisAPI |
RedisAPI.ftSugadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGADD.
|
RedisAPI |
RedisAPI.ftSugdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGDEL.
|
RedisAPI |
RedisAPI.ftSugget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGGET.
|
RedisAPI |
RedisAPI.ftSuglen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SUGLEN.
|
RedisAPI |
RedisAPI.ftSynadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SYNADD.
|
RedisAPI |
RedisAPI.ftSyndump(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SYNDUMP.
|
RedisAPI |
RedisAPI.ftSynupdate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.SYNUPDATE.
|
RedisAPI |
RedisAPI.ftTagvals(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command FT.TAGVALS.
|
RedisAPI |
RedisAPI.function(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for function commands.
|
RedisAPI |
RedisAPI.geoadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Add one or more geospatial items in the geospatial index represented using a sorted set.
|
RedisAPI |
RedisAPI.geodist(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns the distance between two members of a geospatial index.
|
RedisAPI |
RedisAPI.geohash(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns members of a geospatial index as standard geohash strings.
|
RedisAPI |
RedisAPI.geopos(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns longitude and latitude of members of a geospatial index.
|
RedisAPI |
RedisAPI.georadius(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members matching a given maximum distance from a point.
|
RedisAPI |
RedisAPI.georadiusbymember(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members matching a given maximum distance from a member.
|
RedisAPI |
RedisAPI.georadiusbymemberRo(List<String> args,
Handler<AsyncResult<Response>> handler)
A read-only variant for GEORADIUSBYMEMBER.
|
RedisAPI |
RedisAPI.georadiusRo(List<String> args,
Handler<AsyncResult<Response>> handler)
A read-only variant for GEORADIUS.
|
RedisAPI |
RedisAPI.geosearch(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members inside an area of a box or a circle.
|
RedisAPI |
RedisAPI.geosearchstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Query a sorted set representing a geospatial index to fetch members inside an area of a box or a circle, and store the result in another key.
|
RedisAPI |
RedisAPI.get(String arg0,
Handler<AsyncResult<Response>> handler)
Get the value of a key.
|
RedisAPI |
RedisAPI.getbit(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Returns the bit value at offset in the string value stored at key.
|
RedisAPI |
RedisAPI.getdel(String arg0,
Handler<AsyncResult<Response>> handler)
Get the value of a key and delete the key.
|
RedisAPI |
RedisAPI.getex(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the value of a key and optionally set its expiration.
|
RedisAPI |
RedisAPI.getrange(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Get a substring of the string stored at a key.
|
RedisAPI |
RedisAPI.getset(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Set the string value of a key and return its old value.
|
RedisAPI |
RedisAPI.graphBulk(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.BULK.
|
RedisAPI |
RedisAPI.graphConfig(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.CONFIG.
|
RedisAPI |
RedisAPI.graphDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.DEBUG.
|
RedisAPI |
RedisAPI.graphDelete(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.DELETE.
|
RedisAPI |
RedisAPI.graphExplain(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.EXPLAIN.
|
RedisAPI |
RedisAPI.graphList(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.LIST.
|
RedisAPI |
RedisAPI.graphProfile(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.PROFILE.
|
RedisAPI |
RedisAPI.graphQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.QUERY.
|
RedisAPI |
RedisAPI.graphRoQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.RO_QUERY.
|
RedisAPI |
RedisAPI.graphSlowlog(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command GRAPH.SLOWLOG.
|
RedisAPI |
RedisAPI.hdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Delete one or more hash fields.
|
RedisAPI |
RedisAPI.hello(List<String> args,
Handler<AsyncResult<Response>> handler)
Handshake with Redis.
|
RedisAPI |
RedisAPI.hexists(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine if a hash field exists.
|
RedisAPI |
RedisAPI.hget(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get the value of a hash field.
|
RedisAPI |
RedisAPI.hgetall(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the fields and values in a hash.
|
RedisAPI |
RedisAPI.hincrby(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Increment the integer value of a hash field by the given number.
|
RedisAPI |
RedisAPI.hincrbyfloat(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Increment the float value of a hash field by the given amount.
|
RedisAPI |
RedisAPI.hkeys(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the fields in a hash.
|
RedisAPI |
RedisAPI.hlen(String arg0,
Handler<AsyncResult<Response>> handler)
Get the number of fields in a hash.
|
RedisAPI |
RedisAPI.hmget(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the values of all the given hash fields.
|
RedisAPI |
RedisAPI.hmset(List<String> args,
Handler<AsyncResult<Response>> handler)
Set multiple hash fields to multiple values.
|
RedisAPI |
RedisAPI.hrandfield(List<String> args,
Handler<AsyncResult<Response>> handler)
Get one or multiple random fields from a hash.
|
RedisAPI |
RedisAPI.hscan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate hash fields and associated values.
|
RedisAPI |
RedisAPI.hset(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the string value of a hash field.
|
RedisAPI |
RedisAPI.hsetnx(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value of a hash field, only if the field does not exist.
|
RedisAPI |
RedisAPI.hstrlen(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get the length of the value of a hash field.
|
RedisAPI |
RedisAPI.hvals(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the values in a hash.
|
RedisAPI |
RedisAPI.incr(String arg0,
Handler<AsyncResult<Response>> handler)
Increment the integer value of a key by one.
|
RedisAPI |
RedisAPI.incrby(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Increment the integer value of a key by the given amount.
|
RedisAPI |
RedisAPI.incrbyfloat(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Increment the float value of a key by the given amount.
|
RedisAPI |
RedisAPI.info(List<String> args,
Handler<AsyncResult<Response>> handler)
Get information and statistics about the server.
|
RedisAPI |
RedisAPI.jsonArrappend(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRAPPEND.
|
RedisAPI |
RedisAPI.jsonArrindex(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRINDEX.
|
RedisAPI |
RedisAPI.jsonArrinsert(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRINSERT.
|
RedisAPI |
RedisAPI.jsonArrlen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRLEN.
|
RedisAPI |
RedisAPI.jsonArrpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRPOP.
|
RedisAPI |
RedisAPI.jsonArrtrim(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.ARRTRIM.
|
RedisAPI |
RedisAPI.jsonClear(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.CLEAR.
|
RedisAPI |
RedisAPI.jsonDebug(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.DEBUG.
|
RedisAPI |
RedisAPI.jsonDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.DEL.
|
RedisAPI |
RedisAPI.jsonForget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.FORGET.
|
RedisAPI |
RedisAPI.jsonGet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.GET.
|
RedisAPI |
RedisAPI.jsonMget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.MGET.
|
RedisAPI |
RedisAPI.jsonNumincrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.NUMINCRBY.
|
RedisAPI |
RedisAPI.jsonNummultby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.NUMMULTBY.
|
RedisAPI |
RedisAPI.jsonNumpowby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.NUMPOWBY.
|
RedisAPI |
RedisAPI.jsonObjkeys(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.OBJKEYS.
|
RedisAPI |
RedisAPI.jsonObjlen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.OBJLEN.
|
RedisAPI |
RedisAPI.jsonResp(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.RESP.
|
RedisAPI |
RedisAPI.jsonSet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.SET.
|
RedisAPI |
RedisAPI.jsonStrappend(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.STRAPPEND.
|
RedisAPI |
RedisAPI.jsonStrlen(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.STRLEN.
|
RedisAPI |
RedisAPI.jsonToggle(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.TOGGLE.
|
RedisAPI |
RedisAPI.jsonType(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command JSON.TYPE.
|
RedisAPI |
RedisAPI.keys(String arg0,
Handler<AsyncResult<Response>> handler)
Find all keys matching the given pattern.
|
RedisAPI |
RedisAPI.lastsave(Handler<AsyncResult<Response>> handler)
Get the UNIX time stamp of the last successful save to disk.
|
RedisAPI |
RedisAPI.latency(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for latency diagnostics commands.
|
RedisAPI |
RedisAPI.lcs(List<String> args,
Handler<AsyncResult<Response>> handler)
Find longest common substring.
|
RedisAPI |
RedisAPI.lindex(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get an element from a list by its index.
|
RedisAPI |
RedisAPI.linsert(String arg0,
String arg1,
String arg2,
String arg3,
Handler<AsyncResult<Response>> handler)
Insert an element before or after another element in a list.
|
RedisAPI |
RedisAPI.llen(String arg0,
Handler<AsyncResult<Response>> handler)
Get the length of a list.
|
RedisAPI |
RedisAPI.lmove(String arg0,
String arg1,
String arg2,
String arg3,
Handler<AsyncResult<Response>> handler)
Pop an element from a list, push it to another list and return it.
|
RedisAPI |
RedisAPI.lmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Pop elements from a list.
|
RedisAPI |
RedisAPI.lolwut(List<String> args,
Handler<AsyncResult<Response>> handler)
Display some computer art and the Redis version.
|
RedisAPI |
RedisAPI.lpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the first elements in a list.
|
RedisAPI |
RedisAPI.lpos(List<String> args,
Handler<AsyncResult<Response>> handler)
Return the index of matching elements on a list.
|
RedisAPI |
RedisAPI.lpush(List<String> args,
Handler<AsyncResult<Response>> handler)
Prepend one or multiple elements to a list.
|
RedisAPI |
RedisAPI.lpushx(List<String> args,
Handler<AsyncResult<Response>> handler)
Prepend an element to a list, only if the list exists.
|
RedisAPI |
RedisAPI.lrange(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Get a range of elements from a list.
|
RedisAPI |
RedisAPI.lrem(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove elements from a list.
|
RedisAPI |
RedisAPI.lset(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value of an element in a list by its index.
|
RedisAPI |
RedisAPI.ltrim(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Trim a list to the specified range.
|
RedisAPI |
RedisAPI.memory(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for memory diagnostics commands.
|
RedisAPI |
RedisAPI.mget(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the values of all the given keys.
|
RedisAPI |
RedisAPI.migrate(List<String> args,
Handler<AsyncResult<Response>> handler)
Atomically transfer a key from a Redis instance to another one.
|
RedisAPI |
RedisAPI.module(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for module commands.
|
RedisAPI |
RedisAPI.monitor(Handler<AsyncResult<Response>> handler)
Listen for all requests received by the server in real time.
|
RedisAPI |
RedisAPI.move(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Move a key to another database.
|
RedisAPI |
RedisAPI.mset(List<String> args,
Handler<AsyncResult<Response>> handler)
Set multiple keys to multiple values.
|
RedisAPI |
RedisAPI.msetnx(List<String> args,
Handler<AsyncResult<Response>> handler)
Set multiple keys to multiple values, only if none of the keys exist.
|
RedisAPI |
RedisAPI.multi(Handler<AsyncResult<Response>> handler)
Mark the start of a transaction block.
|
RedisAPI |
RedisAPI.object(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for object introspection commands.
|
RedisAPI |
RedisAPI.persist(String arg0,
Handler<AsyncResult<Response>> handler)
Remove the expiration from a key.
|
RedisAPI |
RedisAPI.pexpire(List<String> args,
Handler<AsyncResult<Response>> handler)
Set a key's time to live in milliseconds.
|
RedisAPI |
RedisAPI.pexpireat(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the expiration for a key as a UNIX timestamp specified in milliseconds.
|
RedisAPI |
RedisAPI.pexpiretime(String arg0,
Handler<AsyncResult<Response>> handler)
Get the expiration Unix timestamp for a key in milliseconds.
|
RedisAPI |
RedisAPI.pfadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Adds the specified elements to the specified HyperLogLog.
|
RedisAPI |
RedisAPI.pfcount(List<String> args,
Handler<AsyncResult<Response>> handler)
Return the approximated cardinality of the set(s) observed by the HyperLogLog at key(s).
|
RedisAPI |
RedisAPI.pfdebug(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Internal commands for debugging HyperLogLog values.
|
RedisAPI |
RedisAPI.pfmerge(List<String> args,
Handler<AsyncResult<Response>> handler)
Merge N different HyperLogLogs into a single one.
|
RedisAPI |
RedisAPI.pfselftest(Handler<AsyncResult<Response>> handler)
An internal command for testing HyperLogLog values.
|
RedisAPI |
RedisAPI.ping(List<String> args,
Handler<AsyncResult<Response>> handler)
Ping the server.
|
void |
RedisConnection.pipeTo(WriteStream<Response> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
RedisAPI |
RedisAPI.psetex(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value and expiration in milliseconds of a key.
|
RedisAPI |
RedisAPI.psubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Listen for messages published to channels matching the given patterns.
|
RedisAPI |
RedisAPI.psync(List<String> args,
Handler<AsyncResult<Response>> handler)
Internal command used for replication.
|
RedisAPI |
RedisAPI.pttl(String arg0,
Handler<AsyncResult<Response>> handler)
Get the time to live for a key in milliseconds.
|
RedisAPI |
RedisAPI.publish(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Post a message to a channel.
|
RedisAPI |
RedisAPI.pubsub(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for Pub/Sub commands.
|
RedisAPI |
RedisAPI.punsubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Stop listening for messages posted to channels matching the given patterns.
|
RedisAPI |
RedisAPI.quit(List<String> args,
Handler<AsyncResult<Response>> handler)
Close the connection.
|
RedisAPI |
RedisAPI.randomkey(Handler<AsyncResult<Response>> handler)
Return a random key from the keyspace.
|
RedisAPI |
RedisAPI.readonly(Handler<AsyncResult<Response>> handler)
Enables read queries for a connection to a cluster replica node.
|
RedisAPI |
RedisAPI.readwrite(Handler<AsyncResult<Response>> handler)
Disables read queries for a connection to a cluster replica node.
|
RedisAPI |
RedisAPI.rename(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Rename a key.
|
RedisAPI |
RedisAPI.renamenx(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Rename a key, only if the new key does not exist.
|
RedisAPI |
RedisAPI.replconf(List<String> args,
Handler<AsyncResult<Response>> handler)
An internal command for configuring the replication stream.
|
RedisAPI |
RedisAPI.replicaof(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Make the server a replica of another instance, or promote it as master.
|
RedisAPI |
RedisAPI.reset(Handler<AsyncResult<Response>> handler)
Reset the connection.
|
RedisAPI |
RedisAPI.restore(List<String> args,
Handler<AsyncResult<Response>> handler)
Create a key using the provided serialized value, previously obtained using DUMP.
|
RedisAPI |
RedisAPI.restoreAsking(List<String> args,
Handler<AsyncResult<Response>> handler)
An internal command for migrating keys in a cluster.
|
RedisAPI |
RedisAPI.role(Handler<AsyncResult<Response>> handler)
Return the role of the instance in the context of replication.
|
RedisAPI |
RedisAPI.rpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and get the last elements in a list.
|
RedisAPI |
RedisAPI.rpoplpush(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Remove the last element in a list, prepend it to another list and return it.
|
RedisAPI |
RedisAPI.rpush(List<String> args,
Handler<AsyncResult<Response>> handler)
Append one or multiple elements to a list.
|
RedisAPI |
RedisAPI.rpushx(List<String> args,
Handler<AsyncResult<Response>> handler)
Append an element to a list, only if the list exists.
|
RedisAPI |
RedisAPI.sadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Add one or more members to a set.
|
RedisAPI |
RedisAPI.save(Handler<AsyncResult<Response>> handler)
Synchronously save the dataset to disk.
|
RedisAPI |
RedisAPI.scan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate the keys space.
|
RedisAPI |
RedisAPI.scard(String arg0,
Handler<AsyncResult<Response>> handler)
Get the number of members in a set.
|
RedisAPI |
RedisAPI.script(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for Lua scripts management commands.
|
RedisAPI |
RedisAPI.sdiff(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sets.
|
RedisAPI |
RedisAPI.sdiffstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sets and store the resulting set in a key.
|
RedisAPI |
RedisAPI.select(String arg0,
Handler<AsyncResult<Response>> handler)
Change the selected database for the current connection.
|
Redis |
Redis.send(Request command,
Handler<AsyncResult<Response>> onSend)
Send the given command to the redis server or cluster.
|
RedisConnection |
RedisConnection.send(Request command,
Handler<AsyncResult<Response>> onSend)
Send the given command to the redis server or cluster.
|
RedisAPI |
RedisAPI.set(List<String> args,
Handler<AsyncResult<Response>> handler)
Set the string value of a key.
|
RedisAPI |
RedisAPI.setbit(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Sets or clears the bit at offset in the string value stored at key.
|
RedisAPI |
RedisAPI.setex(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Set the value and expiration of a key.
|
RedisAPI |
RedisAPI.setnx(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Set the value of a key, only if the key does not exist.
|
RedisAPI |
RedisAPI.setrange(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Overwrite part of a string at key starting at the specified offset.
|
RedisAPI |
RedisAPI.shutdown(List<String> args,
Handler<AsyncResult<Response>> handler)
Synchronously save the dataset to disk and then shut down the server.
|
RedisAPI |
RedisAPI.sinter(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sets.
|
RedisAPI |
RedisAPI.sintercard(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sets and return the cardinality of the result.
|
RedisAPI |
RedisAPI.sinterstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sets and store the resulting set in a key.
|
RedisAPI |
RedisAPI.sismember(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine if a given value is a member of a set.
|
RedisAPI |
RedisAPI.slaveof(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Make the server a replica of another instance, or promote it as master.
|
RedisAPI |
RedisAPI.slowlog(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for slow log commands.
|
RedisAPI |
RedisAPI.smembers(String arg0,
Handler<AsyncResult<Response>> handler)
Get all the members in a set.
|
RedisAPI |
RedisAPI.smismember(List<String> args,
Handler<AsyncResult<Response>> handler)
Returns the membership associated with the given elements for a set.
|
RedisAPI |
RedisAPI.smove(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Move a member from one set to another.
|
RedisAPI |
RedisAPI.sort(List<String> args,
Handler<AsyncResult<Response>> handler)
Sort the elements in a list, set or sorted set.
|
RedisAPI |
RedisAPI.sortRo(List<String> args,
Handler<AsyncResult<Response>> handler)
Sort the elements in a list, set or sorted set.
|
RedisAPI |
RedisAPI.spop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return one or multiple random members from a set.
|
RedisAPI |
RedisAPI.spublish(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Post a message to a shard channel.
|
RedisAPI |
RedisAPI.srandmember(List<String> args,
Handler<AsyncResult<Response>> handler)
Get one or multiple random members from a set.
|
RedisAPI |
RedisAPI.srem(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove one or more members from a set.
|
RedisAPI |
RedisAPI.sscan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate Set elements.
|
RedisAPI |
RedisAPI.ssubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Listen for messages published to the given shard channels.
|
RedisAPI |
RedisAPI.strlen(String arg0,
Handler<AsyncResult<Response>> handler)
Get the length of the value stored in a key.
|
RedisAPI |
RedisAPI.subscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Listen for messages published to the given channels.
|
RedisAPI |
RedisAPI.substr(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Get a substring of the string stored at a key.
|
RedisAPI |
RedisAPI.sunion(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sets.
|
RedisAPI |
RedisAPI.sunionstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sets and store the resulting set in a key.
|
RedisAPI |
RedisAPI.sunsubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Stop listening for messages posted to the given shard channels.
|
RedisAPI |
RedisAPI.swapdb(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Swaps two Redis databases.
|
RedisAPI |
RedisAPI.sync(Handler<AsyncResult<Response>> handler)
Internal command used for replication.
|
RedisAPI |
RedisAPI.tdigestAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.ADD.
|
RedisAPI |
RedisAPI.tdigestByrank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.BYRANK.
|
RedisAPI |
RedisAPI.tdigestByrevrank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.BYREVRANK.
|
RedisAPI |
RedisAPI.tdigestCdf(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.CDF.
|
RedisAPI |
RedisAPI.tdigestCreate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.CREATE.
|
RedisAPI |
RedisAPI.tdigestInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.INFO.
|
RedisAPI |
RedisAPI.tdigestMax(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.MAX.
|
RedisAPI |
RedisAPI.tdigestMerge(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.MERGE.
|
RedisAPI |
RedisAPI.tdigestMin(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.MIN.
|
RedisAPI |
RedisAPI.tdigestQuantile(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.QUANTILE.
|
RedisAPI |
RedisAPI.tdigestRank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.RANK.
|
RedisAPI |
RedisAPI.tdigestReset(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.RESET.
|
RedisAPI |
RedisAPI.tdigestRevrank(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.REVRANK.
|
RedisAPI |
RedisAPI.tdigestTrimmedMean(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TDIGEST.TRIMMED_MEAN.
|
RedisAPI |
RedisAPI.time(Handler<AsyncResult<Response>> handler)
Return the current server time.
|
RedisAPI |
RedisAPI.timeseriesClusterset(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.CLUSTERSET.
|
RedisAPI |
RedisAPI.timeseriesClustersetfromshard(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.CLUSTERSETFROMSHARD.
|
RedisAPI |
RedisAPI.timeseriesHello(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.HELLO.
|
RedisAPI |
RedisAPI.timeseriesInfocluster(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.INFOCLUSTER.
|
RedisAPI |
RedisAPI.timeseriesInnercommunication(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.INNERCOMMUNICATION.
|
RedisAPI |
RedisAPI.timeseriesNetworktest(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.NETWORKTEST.
|
RedisAPI |
RedisAPI.timeseriesRefreshcluster(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TIMESERIES.REFRESHCLUSTER.
|
RedisAPI |
RedisAPI.topkAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.ADD.
|
RedisAPI |
RedisAPI.topkCount(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.COUNT.
|
RedisAPI |
RedisAPI.topkIncrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.INCRBY.
|
RedisAPI |
RedisAPI.topkInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.INFO.
|
RedisAPI |
RedisAPI.topkList(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.LIST.
|
RedisAPI |
RedisAPI.topkQuery(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.QUERY.
|
RedisAPI |
RedisAPI.topkReserve(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TOPK.RESERVE.
|
RedisAPI |
RedisAPI.touch(List<String> args,
Handler<AsyncResult<Response>> handler)
Alters the last access time of a key(s).
|
RedisAPI |
RedisAPI.tsAdd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.ADD.
|
RedisAPI |
RedisAPI.tsAlter(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.ALTER.
|
RedisAPI |
RedisAPI.tsCreate(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.CREATE.
|
RedisAPI |
RedisAPI.tsCreaterule(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.CREATERULE.
|
RedisAPI |
RedisAPI.tsDecrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.DECRBY.
|
RedisAPI |
RedisAPI.tsDel(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.DEL.
|
RedisAPI |
RedisAPI.tsDeleterule(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.DELETERULE.
|
RedisAPI |
RedisAPI.tsGet(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.GET.
|
RedisAPI |
RedisAPI.tsIncrby(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.INCRBY.
|
RedisAPI |
RedisAPI.tsInfo(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.INFO.
|
RedisAPI |
RedisAPI.tsMadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MADD.
|
RedisAPI |
RedisAPI.tsMget(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MGET.
|
RedisAPI |
RedisAPI.tsMrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MRANGE.
|
RedisAPI |
RedisAPI.tsMrevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.MREVRANGE.
|
RedisAPI |
RedisAPI.tsQueryindex(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.QUERYINDEX.
|
RedisAPI |
RedisAPI.tsRange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.RANGE.
|
RedisAPI |
RedisAPI.tsRevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Redis command TS.REVRANGE.
|
RedisAPI |
RedisAPI.ttl(String arg0,
Handler<AsyncResult<Response>> handler)
Get the time to live for a key in seconds.
|
RedisAPI |
RedisAPI.type(String arg0,
Handler<AsyncResult<Response>> handler)
Determine the type stored at key.
|
RedisAPI |
RedisAPI.unlink(List<String> args,
Handler<AsyncResult<Response>> handler)
Delete a key asynchronously in another thread.
|
RedisAPI |
RedisAPI.unsubscribe(List<String> args,
Handler<AsyncResult<Response>> handler)
Stop listening for messages posted to the given channels.
|
RedisAPI |
RedisAPI.unwatch(Handler<AsyncResult<Response>> handler)
Forget about all watched keys.
|
RedisAPI |
RedisAPI.wait(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Wait for the synchronous replication of all the write commands sent in the context of the current connection.
|
RedisAPI |
RedisAPI.watch(List<String> args,
Handler<AsyncResult<Response>> handler)
Watch the given keys to determine execution of the MULTI/EXEC block.
|
RedisAPI |
RedisAPI.xack(List<String> args,
Handler<AsyncResult<Response>> handler)
Marks a pending message as correctly processed, effectively removing it from the pending entries list of the consumer group.
|
RedisAPI |
RedisAPI.xadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Appends a new entry to a stream.
|
RedisAPI |
RedisAPI.xautoclaim(List<String> args,
Handler<AsyncResult<Response>> handler)
Changes (or acquires) ownership of messages in a consumer group, as if the messages were delivered to the specified consumer.
|
RedisAPI |
RedisAPI.xclaim(List<String> args,
Handler<AsyncResult<Response>> handler)
Changes (or acquires) ownership of a message in a consumer group, as if the message was delivered to the specified consumer.
|
RedisAPI |
RedisAPI.xdel(List<String> args,
Handler<AsyncResult<Response>> handler)
Removes the specified entries from the stream.
|
RedisAPI |
RedisAPI.xgroup(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for consumer groups commands.
|
RedisAPI |
RedisAPI.xinfo(List<String> args,
Handler<AsyncResult<Response>> handler)
A container for stream introspection commands.
|
RedisAPI |
RedisAPI.xlen(String arg0,
Handler<AsyncResult<Response>> handler)
Return the number of entries in a stream.
|
RedisAPI |
RedisAPI.xpending(List<String> args,
Handler<AsyncResult<Response>> handler)
Return information and entries from a stream consumer group pending entries list, that are messages fetched but never acknowledged.
|
RedisAPI |
RedisAPI.xrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of elements in a stream, with IDs matching the specified IDs interval.
|
RedisAPI |
RedisAPI.xread(List<String> args,
Handler<AsyncResult<Response>> handler)
Return never seen elements in multiple streams, with IDs greater than the ones reported by the caller for each stream.
|
RedisAPI |
RedisAPI.xreadgroup(List<String> args,
Handler<AsyncResult<Response>> handler)
Return new entries from a stream using a consumer group, or access the history of the pending entries for a given consumer.
|
RedisAPI |
RedisAPI.xrevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of elements in a stream, with IDs matching the specified IDs interval, in reverse order (from greater to smaller IDs) compared to XRANGE.
|
RedisAPI |
RedisAPI.xsetid(List<String> args,
Handler<AsyncResult<Response>> handler)
An internal command for replicating stream values.
|
RedisAPI |
RedisAPI.xtrim(List<String> args,
Handler<AsyncResult<Response>> handler)
Trims the stream to (approximately if '~' is passed) a certain size.
|
RedisAPI |
RedisAPI.zadd(List<String> args,
Handler<AsyncResult<Response>> handler)
Add one or more members to a sorted set, or update its score if it already exists.
|
RedisAPI |
RedisAPI.zcard(String arg0,
Handler<AsyncResult<Response>> handler)
Get the number of members in a sorted set.
|
RedisAPI |
RedisAPI.zcount(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Count the members in a sorted set with scores within the given values.
|
RedisAPI |
RedisAPI.zdiff(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sorted sets.
|
RedisAPI |
RedisAPI.zdiffstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Subtract multiple sorted sets and store the resulting sorted set in a new key.
|
RedisAPI |
RedisAPI.zincrby(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Increment the score of a member in a sorted set.
|
RedisAPI |
RedisAPI.zinter(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sorted sets.
|
RedisAPI |
RedisAPI.zintercard(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sorted sets and return the cardinality of the result.
|
RedisAPI |
RedisAPI.zinterstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Intersect multiple sorted sets and store the resulting sorted set in a new key.
|
RedisAPI |
RedisAPI.zlexcount(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Count the number of members in a sorted set between a given lexicographical range.
|
RedisAPI |
RedisAPI.zmpop(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with scores in a sorted set.
|
RedisAPI |
RedisAPI.zmscore(List<String> args,
Handler<AsyncResult<Response>> handler)
Get the score associated with the given members in a sorted set.
|
RedisAPI |
RedisAPI.zpopmax(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with the highest scores in a sorted set.
|
RedisAPI |
RedisAPI.zpopmin(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove and return members with the lowest scores in a sorted set.
|
RedisAPI |
RedisAPI.zrandmember(List<String> args,
Handler<AsyncResult<Response>> handler)
Get one or multiple random elements from a sorted set.
|
RedisAPI |
RedisAPI.zrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set.
|
RedisAPI |
RedisAPI.zrangebylex(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by lexicographical range.
|
RedisAPI |
RedisAPI.zrangebyscore(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by score.
|
RedisAPI |
RedisAPI.zrangestore(List<String> args,
Handler<AsyncResult<Response>> handler)
Store a range of members from sorted set into another key.
|
RedisAPI |
RedisAPI.zrank(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine the index of a member in a sorted set.
|
RedisAPI |
RedisAPI.zrem(List<String> args,
Handler<AsyncResult<Response>> handler)
Remove one or more members from a sorted set.
|
RedisAPI |
RedisAPI.zremrangebylex(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove all members in a sorted set between the given lexicographical range.
|
RedisAPI |
RedisAPI.zremrangebyrank(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove all members in a sorted set within the given indexes.
|
RedisAPI |
RedisAPI.zremrangebyscore(String arg0,
String arg1,
String arg2,
Handler<AsyncResult<Response>> handler)
Remove all members in a sorted set within the given scores.
|
RedisAPI |
RedisAPI.zrevrange(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by index, with scores ordered from high to low.
|
RedisAPI |
RedisAPI.zrevrangebylex(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by lexicographical range, ordered from higher to lower strings.
|
RedisAPI |
RedisAPI.zrevrangebyscore(List<String> args,
Handler<AsyncResult<Response>> handler)
Return a range of members in a sorted set, by score, with scores ordered from high to low.
|
RedisAPI |
RedisAPI.zrevrank(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Determine the index of a member in a sorted set, with scores ordered from high to low.
|
RedisAPI |
RedisAPI.zscan(List<String> args,
Handler<AsyncResult<Response>> handler)
Incrementally iterate sorted sets elements and associated scores.
|
RedisAPI |
RedisAPI.zscore(String arg0,
String arg1,
Handler<AsyncResult<Response>> handler)
Get the score associated with the given member in a sorted set.
|
RedisAPI |
RedisAPI.zunion(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sorted sets.
|
RedisAPI |
RedisAPI.zunionstore(List<String> args,
Handler<AsyncResult<Response>> handler)
Add multiple sorted sets and store the resulting sorted set in a new key.
|
| Modifier and Type | Method and Description |
|---|---|
void |
ServiceDiscovery.getRecord(java.util.function.Function<Record,Boolean> filter,
boolean includeOutOfService,
Handler<AsyncResult<Record>> resultHandler)
Lookups for a single record.
|
void |
ServiceDiscovery.getRecord(java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<Record>> resultHandler)
Lookups for a single record.
|
void |
ServiceDiscovery.getRecord(JsonObject filter,
Handler<AsyncResult<Record>> resultHandler)
Lookups for a single record.
|
void |
ServiceDiscovery.getRecord(String id,
Handler<AsyncResult<Record>> resultHandler)
Looks up for a single record by its registration
id. |
void |
ServiceDiscovery.getRecords(java.util.function.Function<Record,Boolean> filter,
boolean includeOutOfService,
Handler<AsyncResult<List<Record>>> resultHandler)
Lookups for a set of records.
|
void |
ServiceDiscovery.getRecords(java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<List<Record>>> resultHandler)
Lookups for a set of records.
|
void |
ServiceDiscovery.getRecords(JsonObject filter,
Handler<AsyncResult<List<Record>>> resultHandler)
Lookups for a set of records.
|
void |
ServiceDiscovery.publish(Record record,
Handler<AsyncResult<Record>> resultHandler)
Publishes a record.
|
ServiceDiscovery |
ServiceDiscovery.registerServiceExporter(ServiceExporter exporter,
JsonObject configuration,
Handler<AsyncResult<Void>> completionHandler)
Registers a discovery bridge.
|
ServiceDiscovery |
ServiceDiscovery.registerServiceImporter(ServiceImporter importer,
JsonObject configuration,
Handler<AsyncResult<Void>> completionHandler)
Registers a discovery service importer.
|
void |
ServiceDiscovery.unpublish(String id,
Handler<AsyncResult<Void>> resultHandler)
Un-publishes a record.
|
void |
ServiceDiscovery.update(Record record,
Handler<AsyncResult<Record>> resultHandler)
Updates the given record.
|
| Modifier and Type | Method and Description |
|---|---|
void |
ServicePublisher.publish(Record record,
Handler<AsyncResult<Record>> resultHandler)
Publishes a record.
|
void |
ServicePublisher.unpublish(String id,
Handler<AsyncResult<Void>> resultHandler)
Un-publishes a record.
|
void |
ServicePublisher.update(Record record,
Handler<AsyncResult<Record>> resultHandler)
Updates an existing record.
|
| Modifier and Type | Method and Description |
|---|---|
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject conf,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject conf,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static <T> void |
MessageSource.getConsumer(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<MessageConsumer<T>>> resultHandler)
Convenient method that looks for a message source and provides the configured .
|
static <T> void |
MessageSource.getConsumer(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<MessageConsumer<T>>> resultHandler)
Convenient method that looks for a message source and provides the configured .
|
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
MongoDataSource.getMongoClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<MongoClient>> resultHandler)
Convenient method that looks for a Mongo datasource source and provides the configured
MongoClient. |
static void |
MongoDataSource.getMongoClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<MongoClient>> resultHandler)
Convenient method that looks for a Mongo datasource source and provides the configured
MongoClient. |
static void |
MongoDataSource.getMongoClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<MongoClient>> resultHandler)
Convenient method that looks for a Mongo datasource source and provides the configured
MongoClient. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static <T> T |
EventBusService.getServiceProxy(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Class<T> clientClass,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxy(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Class<T> clientClass,
JsonObject conf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxyWithJsonFilter(ServiceDiscovery discovery,
JsonObject filter,
Class<T> clientClass,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxyWithJsonFilter(ServiceDiscovery discovery,
JsonObject filter,
Class<T> clientClass,
JsonObject conf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject conf,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject conf,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
| Modifier and Type | Method and Description |
|---|---|
void |
SqlConnection.begin(Handler<AsyncResult<Transaction>> handler)
Begin a transaction and returns a
Transaction for controlling and tracking
this transaction. |
void |
PreparedStatement.close(Handler<AsyncResult<Void>> completionHandler)
Like
PreparedStatement.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but notifies the completionHandler when it's closed. |
void |
SqlConnection.close(Handler<AsyncResult<Void>> handler)
Close the current connection after all the pending commands have been processed.
|
void |
Pool.close(Handler<AsyncResult<Void>> handler)
Close the pool and release the associated resources.
|
void |
RowStream.close(Handler<AsyncResult<Void>> completionHandler)
Close the stream and release the resources.
|
void |
SqlClient.close(Handler<AsyncResult<Void>> handler)
Close the client and release the associated resources.
|
void |
Cursor.close(Handler<AsyncResult<Void>> completionHandler)
Like
Cursor.close(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with a completionHandler called when the cursor has been released. |
void |
Transaction.commit(Handler<AsyncResult<Void>> handler)
Like
Transaction.commit(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) with an handler to be notified when the transaction commit has completed |
void |
Transaction.completion(Handler<AsyncResult<Void>> handler)
Like
Transaction.completion(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) but with a callback |
void |
PreparedQuery.execute(Handler<AsyncResult<T>> handler)
Execute the query.
|
void |
Query.execute(Handler<AsyncResult<T>> handler)
Execute the query.
|
void |
PreparedQuery.execute(Tuple tuple,
Handler<AsyncResult<T>> handler)
Execute the query.
|
void |
PreparedQuery.executeBatch(List<Tuple> batch,
Handler<AsyncResult<T>> handler)
Execute the query with a batch of tuples.
|
void |
Pool.getConnection(Handler<AsyncResult<SqlConnection>> handler)
Get a connection from the pool.
|
void |
RowStream.pipeTo(WriteStream<T> dst,
Handler<AsyncResult<Void>> handler)
Pipe this
ReadStream to the WriteStream. |
SqlConnection |
SqlConnection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler)
Create a prepared statement using the given
sql string. |
SqlConnection |
SqlConnection.prepare(String sql,
PrepareOptions options,
Handler<AsyncResult<PreparedStatement>> handler)
Create a prepared statement using the given
sql string. |
void |
Cursor.read(int count,
Handler<AsyncResult<RowSet<Row>>> handler)
Read rows from the cursor, the result is provided asynchronously to the
handler. |
void |
Transaction.rollback(Handler<AsyncResult<Void>> handler)
Like
Transaction.rollback(io.vertx.core.Handler<io.vertx.core.AsyncResult<java.lang.Void>>) with an handler to be notified when the transaction rollback has completed |
<T> void |
Pool.withConnection(java.util.function.Function<SqlConnection,Future<T>> function,
Handler<AsyncResult<T>> handler)
Get a connection from the pool and execute the given
function. |
<T> void |
Pool.withTransaction(java.util.function.Function<SqlConnection,Future<T>> function,
Handler<AsyncResult<T>> handler)
Execute the given
function within a transaction. |
<T> void |
Pool.withTransaction(TransactionPropagation txPropagation,
java.util.function.Function<SqlConnection,Future<T>> function,
Handler<AsyncResult<T>> handler)
Like
Pool.withTransaction(java.util.function.Function<io.vertx.rxjava.sqlclient.SqlConnection, io.vertx.core.Future<T>>, io.vertx.core.Handler<io.vertx.core.AsyncResult<T>>) but allows for setting the mode, defining how the acquired
connection is managed during the execution of the function. |
| Modifier and Type | Method and Description |
|---|---|
static Completable |
CompletableHelper.toCompletable(java.util.function.Consumer<Handler<AsyncResult<Void>>> handler)
Returns a
Completable that, when subscribed, uses the provided handler to adapt a callback-based asynchronous method. |
static <T> Maybe<T> |
MaybeHelper.toMaybe(java.util.function.Consumer<Handler<AsyncResult<T>>> handler)
Returns a
Maybe that, when subscribed, uses the provided handler to adapt a callback-based asynchronous method. |
static <T> MaybeObserver<T> |
MaybeHelper.toObserver(Handler<AsyncResult<T>> handler)
Adapts an Vert.x
Handler<AsyncResult<T>> to an RxJava2 MaybeObserver. |
static <T> SingleObserver<T> |
SingleHelper.toObserver(Handler<AsyncResult<T>> handler)
Adapts an Vert.x
Handler<AsyncResult<T>> to an RxJava2 SingleObserver. |
static <T> CompletableObserver |
CompletableHelper.toObserver(Handler<AsyncResult<T>> handler)
Adapts an Vert.x
Handler<AsyncResult<T>> to an RxJava2 SingleObserver. |
static <T> Single<T> |
SingleHelper.toSingle(java.util.function.Consumer<Handler<AsyncResult<T>>> handler)
Returns a
Single that, when subscribed, uses the provided handler to adapt a callback-based asynchronous method. |
| Modifier and Type | Method and Description |
|---|---|
HttpServerRequest |
HttpServerRequest.body(Handler<AsyncResult<Buffer>> handler)
Same as
HttpServerRequest.body(io.vertx.core.Handler<io.vertx.core.AsyncResult<io.vertx.rxjava3.core.buffer.Buffer>>) but with an handler called when the operation completes |
| Modifier and Type | Method and Description |
|---|---|
ConsulClient |
ConsulClient.deletePolicy(String id,
Handler<AsyncResult<Boolean>> resultHandler)
This endpoint deletes an ACL policy
|
ConsulClient |
ConsulClient.getAclPolicies(Handler<AsyncResult<List<AclPolicy>>> resultHandler)
This endpoint lists all the ACL policies.
|
| Modifier and Type | Method and Description |
|---|---|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertFailure()
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a failed result it completes the async operation.
When the returned handler is called back with a succeeded result it fails the test.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertFailure(Handler<Throwable> causeHandler)
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a failed result it completes the async operation.
When the returned handler is called back with a succeeded result it fails the test.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertSuccess()
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a succeeded result it completes the async operation.
When the returned handler is called back with a failed result it fails the test with the cause of the failure.
|
<T> Handler<AsyncResult<T>> |
TestContext.asyncAssertSuccess(Handler<T> resultHandler)
Creates and returns a new async handler, the returned handler controls the completion of the test.
When the returned handler is called back with a succeeded result it invokes the
resultHandler argument
with the async result. |
| Modifier and Type | Method and Description |
|---|---|
int |
RoutingContext.addEndHandler(Handler<AsyncResult<Void>> handler)
Add an end handler for the request/response context.
|
| Modifier and Type | Method and Description |
|---|---|
PgConnection |
PgConnection.cancelRequest(Handler<AsyncResult<Void>> handler)
Send a request cancellation message to tell the server to cancel processing request in this connection.
|
| Modifier and Type | Method and Description |
|---|---|
static <T> T |
EventBusService.getServiceProxy(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Class<T> clientClass,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxy(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Class<T> clientClass,
JsonObject conf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxyWithJsonFilter(ServiceDiscovery discovery,
JsonObject filter,
Class<T> clientClass,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxyWithJsonFilter(ServiceDiscovery discovery,
JsonObject filter,
Class<T> clientClass,
JsonObject conf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
| Modifier and Type | Method and Description |
|---|---|
void |
ServiceDiscovery.getRecord(java.util.function.Function<Record,Boolean> filter,
boolean includeOutOfService,
Handler<AsyncResult<Record>> resultHandler)
Lookups for a single record.
|
void |
ServiceDiscovery.getRecord(java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<Record>> resultHandler)
Lookups for a single record.
|
void |
ServiceDiscovery.getRecord(JsonObject filter,
Handler<AsyncResult<Record>> resultHandler)
Lookups for a single record.
|
void |
ServiceDiscovery.getRecord(String id,
Handler<AsyncResult<Record>> resultHandler)
Looks up for a single record by its registration
id. |
void |
ServiceDiscovery.getRecords(java.util.function.Function<Record,Boolean> filter,
boolean includeOutOfService,
Handler<AsyncResult<List<Record>>> resultHandler)
Lookups for a set of records.
|
void |
ServiceDiscovery.getRecords(java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<List<Record>>> resultHandler)
Lookups for a set of records.
|
void |
ServiceDiscovery.getRecords(JsonObject filter,
Handler<AsyncResult<List<Record>>> resultHandler)
Lookups for a set of records.
|
void |
ServiceDiscovery.publish(Record record,
Handler<AsyncResult<Record>> resultHandler)
Publishes a record.
|
ServiceDiscovery |
ServiceDiscovery.registerServiceExporter(ServiceExporter exporter,
JsonObject configuration,
Handler<AsyncResult<Void>> completionHandler)
Registers a discovery bridge.
|
ServiceDiscovery |
ServiceDiscovery.registerServiceImporter(ServiceImporter importer,
JsonObject configuration,
Handler<AsyncResult<Void>> completionHandler)
Registers a discovery service importer.
|
void |
ServiceDiscovery.unpublish(String id,
Handler<AsyncResult<Void>> resultHandler)
Un-publishes a record.
|
void |
ServiceDiscovery.update(Record record,
Handler<AsyncResult<Record>> resultHandler)
Updates the given record.
|
| Modifier and Type | Method and Description |
|---|---|
void |
RedisBackendService.getRecord(String uuid,
Handler<AsyncResult<Record>> resultHandler) |
void |
RedisBackendService.getRecords(Handler<AsyncResult<List<Record>>> resultHandler) |
void |
RedisBackendService.remove(Record record,
Handler<AsyncResult<Record>> resultHandler) |
void |
RedisBackendService.remove(String uuid,
Handler<AsyncResult<Record>> resultHandler) |
void |
RedisBackendService.store(Record record,
Handler<AsyncResult<Record>> resultHandler) |
void |
RedisBackendService.update(Record record,
Handler<AsyncResult<Void>> resultHandler) |
| Modifier and Type | Method and Description |
|---|---|
void |
ServiceDiscoveryBackend.getRecord(String uuid,
Handler<AsyncResult<Record>> resultHandler)
Get the record with the given uuid.
|
void |
ServiceDiscoveryBackend.getRecords(Handler<AsyncResult<List<Record>>> resultHandler)
Gets all the records
|
void |
ServicePublisher.publish(Record record,
Handler<AsyncResult<Record>> resultHandler)
Publishes a record.
|
void |
ServiceDiscoveryBackend.remove(Record record,
Handler<AsyncResult<Record>> resultHandler)
Removes a record.
|
void |
ServiceDiscoveryBackend.remove(String uuid,
Handler<AsyncResult<Record>> resultHandler)
Removes a records based on its UUID.
|
void |
ServiceDiscoveryBackend.store(Record record,
Handler<AsyncResult<Record>> resultHandler)
Stores a record.
|
void |
ServicePublisher.unpublish(String id,
Handler<AsyncResult<Void>> resultHandler)
Un-publishes a record.
|
void |
ServicePublisher.update(Record record,
Handler<AsyncResult<Record>> resultHandler)
Updates an existing record.
|
void |
ServiceDiscoveryBackend.update(Record record,
Handler<AsyncResult<Void>> resultHandler)
Updates a record
|
| Modifier and Type | Method and Description |
|---|---|
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured
HttpClient. |
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject conf,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured
HttpClient. |
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured
HttpClient. |
static void |
HttpEndpoint.getClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject conf,
Handler<AsyncResult<HttpClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured
HttpClient. |
static <T> void |
MessageSource.getConsumer(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<MessageConsumer<T>>> resultHandler)
Convenient method that looks for a message source and provides the configured
MessageConsumer. |
static <T> void |
MessageSource.getConsumer(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<MessageConsumer<T>>> resultHandler)
Convenient method that looks for a message source and provides the configured
MessageConsumer. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
JDBCDataSource.getJDBCClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<JDBCClient>> resultHandler)
Convenient method that looks for a JDBC datasource source and provides the configured
JDBCClient. |
static void |
MongoDataSource.getMongoClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<MongoClient>> resultHandler)
Convenient method that looks for a Mongo datasource source and provides the configured
MongoClient. |
static void |
MongoDataSource.getMongoClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<MongoClient>> resultHandler)
Convenient method that looks for a Mongo datasource source and provides the configured
MongoClient. |
static void |
MongoDataSource.getMongoClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<MongoClient>> resultHandler)
Convenient method that looks for a Mongo datasource source and provides the configured
MongoClient. |
static <T> T |
EventBusService.getProxy(ServiceDiscovery discovery,
Class<T> itf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getProxy(ServiceDiscovery discovery,
Class<T> itf,
JsonObject conf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static void |
RedisDataSource.getRedisClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject consumerConfiguration,
Handler<AsyncResult<Redis>> resultHandler)
Convenient method that looks for a Redis data source and provides the configured
Redis. |
static <T> T |
EventBusService.getServiceProxy(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Class<T> clientClass,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxy(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Class<T> clientClass,
JsonObject conf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxyWithJsonFilter(ServiceDiscovery discovery,
JsonObject filter,
Class<T> clientClass,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static <T> T |
EventBusService.getServiceProxyWithJsonFilter(ServiceDiscovery discovery,
JsonObject filter,
Class<T> clientClass,
JsonObject conf,
Handler<AsyncResult<T>> resultHandler)
Lookup for a service record and if found, retrieve it and return the service object (used to consume the service).
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured
WebClient. |
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
java.util.function.Function<Record,Boolean> filter,
JsonObject conf,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured
WebClient. |
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
JsonObject filter,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured .
|
static void |
HttpEndpoint.getWebClient(ServiceDiscovery discovery,
JsonObject filter,
JsonObject conf,
Handler<AsyncResult<WebClient>> resultHandler)
Convenient method that looks for a HTTP endpoint and provides the configured
WebClient. |
| Modifier and Type | Method and Description |
|---|---|
static <T> AsyncResult<T> |
ServiceException.fail(int failureCode,
String message)
Create a failed Future containing a ServiceException.
|
static <T> AsyncResult<T> |
ServiceException.fail(int failureCode,
String message,
JsonObject debugInfo)
Create a failed Future containing a ServiceException.
|
| Modifier and Type | Method and Description |
|---|---|
static <T> Handler<AsyncResult<T>> |
HelperUtils.createHandler(Message msg,
boolean includeDebugInfo) |
static Handler<AsyncResult<List<Character>>> |
HelperUtils.createListCharHandler(Message msg,
boolean includeDebugInfo) |
static <T> Handler<AsyncResult<List<T>>> |
HelperUtils.createListHandler(Message msg,
boolean includeDebugInfo) |
static Handler<AsyncResult<Map<String,Character>>> |
HelperUtils.createMapCharHandler(Message msg,
boolean includeDebugInfo) |
static <T> Handler<AsyncResult<Map<String,T>>> |
HelperUtils.createMapHandler(Message msg,
boolean includeDebugInfo) |
static Handler<AsyncResult<Set<Character>>> |
HelperUtils.createSetCharHandler(Message msg,
boolean includeDebugInfo) |
static <T> Handler<AsyncResult<Set<T>>> |
HelperUtils.createSetHandler(Message msg,
boolean includeDebugInfo) |
| Modifier and Type | Method and Description |
|---|---|
void |
SqlConnection.begin(Handler<AsyncResult<Transaction>> handler)
Begin a transaction and returns a
Transaction for controlling and tracking
this transaction. |
void |
PreparedStatement.close(Handler<AsyncResult<Void>> completionHandler)
Like
PreparedStatement.close() but notifies the completionHandler when it's closed. |
void |
SqlConnection.close(Handler<AsyncResult<Void>> handler)
Close the current connection after all the pending commands have been processed.
|
void |
Pool.close(Handler<AsyncResult<Void>> handler)
Close the pool and release the associated resources.
|
void |
RowStream.close(Handler<AsyncResult<Void>> completionHandler)
Close the stream and release the resources.
|
void |
SqlClient.close(Handler<AsyncResult<Void>> handler)
Close the client and release the associated resources.
|
void |
Cursor.close(Handler<AsyncResult<Void>> completionHandler)
Like
Cursor.close() but with a completionHandler called when the cursor has been released. |
void |
Transaction.commit(Handler<AsyncResult<Void>> handler)
Like
Transaction.commit() with an handler to be notified when the transaction commit has completed |
void |
Transaction.completion(Handler<AsyncResult<Void>> handler)
Like
Transaction.completion() but with a callback |
void |
Query.execute(Handler<AsyncResult<T>> handler)
Execute the query.
|
void |
PreparedQuery.execute(Tuple tuple,
Handler<AsyncResult<T>> handler)
Execute the query.
|
void |
PreparedQuery.executeBatch(List<Tuple> batch,
Handler<AsyncResult<T>> handler)
Execute the query with a batch of tuples.
|
void |
Pool.getConnection(Handler<AsyncResult<SqlConnection>> handler)
Get a connection from the pool.
|
SqlConnection |
SqlConnection.prepare(String sql,
Handler<AsyncResult<PreparedStatement>> handler)
Create a prepared statement using the given
sql string. |
SqlConnection |
SqlConnection.prepare(String sql,
PrepareOptions options,
Handler<AsyncResult<PreparedStatement>> handler)
Create a prepared statement using the given
sql string. |
void |
Cursor.read(int count,
Handler<AsyncResult<RowSet<Row>>> handler)
Read rows from the cursor, the result is provided asynchronously to the
handler. |
void |
Transaction.rollback(Handler<AsyncResult<Void>> handler)
Like
Transaction.rollback() with an handler to be notified when the transaction rollback has completed |
default <T> void |
Pool.withConnection(java.util.function.Function<SqlConnection,Future<T>> function,
Handler<AsyncResult<T>> handler)
Get a connection from the pool and execute the given
function. |
default <T> void |
Pool.withTransaction(java.util.function.Function<SqlConnection,Future<T>> function,
Handler<AsyncResult<T>> handler)
Execute the given
function within a transaction. |
default <T> void |
Pool.withTransaction(TransactionPropagation txPropagation,
java.util.function.Function<SqlConnection,Future<T>> function,
Handler<AsyncResult<T>> handler)
Like
Pool.withTransaction(Function, Handler) but allows for setting the mode, defining how the acquired
connection is managed during the execution of the function. |
| Modifier and Type | Method and Description |
|---|---|
void |
SqlTemplate.execute(I parameters,
Handler<AsyncResult<R>> handler)
Execute the query with the
parameters |
void |
SqlTemplate.executeBatch(List<I> batch,
Handler<AsyncResult<R>> handler)
Execute a batch query with the
batch. |
Copyright © 2024 Eclipse. All rights reserved.