Vert.x-Web

Vert.x-Web is a set of building blocks for building web applications with Vert.x. Think of it as a Swiss Army Knife for building modern, scalable, web apps.

Vert.x core provides a fairly low level set of functionality for handling HTTP, and for some applications that will be sufficient.

Vert.x-Web builds on Vert.x core to provide a richer set of functionality for building real web applications, more easily.

It’s the successor to Yoke in Vert.x 2.x, and takes inspiration from projects such as Express in the Node.js world and Sinatra in the Ruby world.

Vert.x-Web is designed to be powerful, un-opionated and fully embeddable. You just use the parts you want and nothing more. Vert.x-Web is not a container.

You can use Vert.x-Web to create classic server-side web applications, RESTful web applications, 'real-time' (server push) web applications, or any other kind of web application you can think of. Vert.x-Web doesn’t care. It’s up to you to chose the type of app you prefer, not Vert.x-Web.

Vert.x-Web is a great fit for writing RESTful HTTP micro-services, but we don’t force you to write apps like that.

Some of the key features of Vert.x-Web include:

  • Routing (based on method, path, etc)

  • Regular expression pattern matching for paths

  • Extraction of parameters from paths

  • Content negotiation

  • Request body handling

  • Body size limits

  • Multipart forms

  • Multipart file uploads

  • Sub routers

  • Session support - both local (for sticky sessions) and clustered (for non sticky)

  • CORS (Cross Origin Resource Sharing) support

  • Error page handler

  • HTTP Basic/Digest Authentication

  • Redirect based authentication

  • Authorization handlers

  • JWT/OAuth2 based authorization

  • User/role/permission authorization

  • Favicon handling

  • Template support for server side rendering, including support for the following template engines out of the box:

    • Handlebars

    • Jade,

    • MVEL

    • Thymeleaf

    • Apache FreeMarker

    • Pebble

    • Rocker

  • Response time handler

  • Static file serving, including caching logic and directory listing.

  • Request timeout support

  • SockJS support

  • Event-bus bridge

  • CSRF Cross Site Request Forgery

  • VirtualHost

Most features in Vert.x-Web are implemented as handlers so you can always write your own. We envisage many more being written over time.

We’ll discuss all these features in this manual.

Using Vert.x Web

To use vert.x web, add the following dependency to the dependencies section of your build descriptor:

  • Maven (in your pom.xml):

<dependency>
 <groupId>io.vertx</groupId>
 <artifactId>vertx-web</artifactId>
 <version>4.0.3</version>
</dependency>
  • Gradle (in your build.gradle file):

dependencies {
 compile 'io.vertx:vertx-web:4.0.3'
}

Development mode

Vert.x Web by default operates in production mode. You can switch the development mode by assigning the dev value to either:

  • the VERTXWEB_ENVIRONMENT environment variable, or

  • the vertxweb.environment system property

In development mode:

  • template engine caches are disabled

  • the ErrorHandler does not display exception details

  • the StaticHandler does not handle cache headers

  • the GraphiQL development tool is disabled

Re-cap on Vert.x core HTTP servers

Vert.x-Web uses and exposes the API from Vert.x core, so it’s well worth getting familiar with the basic concepts of writing HTTP servers using Vert.x core, if you’re not already.

The Vert.x core HTTP documentation goes into a lot of detail on this.

Here’s a hello world web server written using Vert.x core. At this point there is no Vert.x-Web involved:

HttpServer server = vertx.createHttpServer();

server.requestHandler(request -> {

  // This handler gets called for each request that arrives on the server
  HttpServerResponse response = request.response();
  response.putHeader("content-type", "text/plain");

  // Write to the response and end it
  response.end("Hello World!");
});

server.listen(8080);

We create an HTTP server instance, and we set a request handler on it. The request handler will be called whenever a request arrives on the server.

When that happens we are just going to set the content type to text/plain, and write Hello World! and end the response.

We then tell the server to listen at port 8080 (default host is localhost).

You can run this, and point your browser at http://localhost:8080 to verify that it works as expected.

Basic Vert.x-Web concepts

Here’s the 10000 foot view:

A Router is one of the core concepts of Vert.x-Web. It’s an object which maintains zero or more Routes.

A router takes an HTTP request and finds the first matching route for that request, and passes the request to that route.

The route can have a handler associated with it, which then receives the request. You then do something with the request, and then, either end it or pass it to the next matching handler.

Here’s a simple router example:

HttpServer server = vertx.createHttpServer();

Router router = Router.router(vertx);

router.route().handler(ctx -> {

  // This handler will be called for every request
  HttpServerResponse response = ctx.response();
  response.putHeader("content-type", "text/plain");

  // Write to the response and end it
  response.end("Hello World from Vert.x-Web!");
});

server.requestHandler(router).listen(8080);

It basically does the same thing as the Vert.x Core HTTP server hello world example from the previous section, but this time using Vert.x-Web.

We create an HTTP server as before, then we create a router. Once we’ve done that we create a simple route with no matching criteria so it will match all requests that arrive on the server.

We then specify a handler for that route. That handler will be called for all requests that arrive on the server.

The object that gets passed into the handler is a RoutingContext - this contains the standard Vert.x HttpServerRequest and HttpServerResponse but also various other useful stuff that makes working with Vert.x-Web simpler.

For every request that is routed there is a unique routing context instance, and the same instance is passed to all handlers for that request.

Once we’ve set up the handler, we set the request handler of the HTTP server to pass all incoming requests to handle.

So, that’s the basics. Now we’ll look at things in more detail:

Handling requests and calling the next handler

When Vert.x-Web decides to route a request to a matching route, it calls the handler of the route passing in an instance of RoutingContext. A route can have different handlers, that you can append using handler

If you don’t end the response in your handler, you should call next so another matching route can handle the request (if any).

You don’t have to call next before the handler has finished executing. You can do this some time later, if you want:

Route route = router.route("/some/path/");
route.handler(ctx -> {

  HttpServerResponse response = ctx.response();
  // enable chunked responses because we will be adding data as
  // we execute over other handlers. This is only required once and
  // only if several handlers do output.
  response.setChunked(true);

  response.write("route1\n");

  // Call the next matching route after a 5 second delay
  ctx.vertx().setTimer(5000, tid -> ctx.next());
});

route.handler(ctx -> {

  HttpServerResponse response = ctx.response();
  response.write("route2\n");

  // Call the next matching route after a 5 second delay
  ctx.vertx().setTimer(5000, tid -> ctx.next());
});

route.handler(ctx -> {

  HttpServerResponse response = ctx.response();
  response.write("route3");

  // Now end the response
  ctx.response().end();
});

In the above example route1 is written to the response, then 5 seconds later route2 is written to the response, then 5 seconds later route3 is written to the response and the response is ended.

Note, all this happens without any thread blocking.

Simple responses

Handlers are quite powerful as they allow you to build quite complex applications. For simple responses, for example, returning an asynchronous response from a vert.x API directly, the router includes a shortcut to a handler that ensures that:

  1. The response is returned in JSON.

  2. If there is an error processing the handler, a proper error is returned.

  3. If there is an error serializing the response to JSON, a proper error is returned.

router
  .get("/some/path")
  // this handler will ensure that the response is serialized to json
  // the content type is set to "application/json"
  .respond(
    ctx -> Future.succeededFuture(new JsonObject().put("hello", "world")));

router
  .get("/some/path")
  // this handler will ensure that the Pojo is serialized to json
  // the content type is set to "application/json"
  .respond(
    ctx -> Future.succeededFuture(new Pojo()));

However you can also use it for non JSON responses if the function supplied calls either write or end:

router
  .get("/some/path")
  .respond(
    ctx -> ctx
      .response()
        .putHeader("Content-Type", "text/plain")
        .end("hello world!"));

router
  .get("/some/path")
  // in this case, the handler ensures that the connection is ended
  .respond(
    ctx -> ctx
      .response()
        .setChunked(true)
        .write("Write some text..."));

Using blocking handlers

Sometimes, you might have to do something in a handler that might block the event loop for some time, e.g. call a legacy blocking API or do some intensive calculation.

You can’t do that in a normal handler, so we provide the ability to set blocking handlers on a route.

A blocking handler looks just like a normal handler but it’s called by Vert.x using a thread from the worker pool not using an event loop.

You set a blocking handler on a route with blockingHandler. Here’s an example:

router.route().blockingHandler(ctx -> {

  // Do something that might take some time synchronously
  service.doSomethingThatBlocks();

  // Now call the next handler
  ctx.next();

});

By default, any blocking handlers executed on the same context (e.g. the same verticle instance) are ordered - this means the next one won’t be executed until the previous one has completed. If you don’t care about orderering and don’t mind your blocking handlers executing in parallel you can set the blocking handler specifying ordered as false using blockingHandler.

Note, if you need to process multipart form data from a blocking handler, you MUST use a non-blocking handler FIRST in order to call setExpectMultipart(true). Here is an example:

router.post("/some/endpoint").handler(ctx -> {
  ctx.request().setExpectMultipart(true);
  ctx.next();
}).blockingHandler(ctx -> {
  // ... Do some blocking operation
});

Routing by exact path

A route can be set-up to match the path from the request URI. In this case it will match any request which has a path that’s the same as the specified path.

In the following example the handler will be called for a request /some/path/. We also ignore trailing slashes so it will be called for paths /some/path and /some/path// too:

Route route = router.route().path("/some/path/");

route.handler(ctx -> {
  // This handler will be called for the following request paths:

  // `/some/path/`
  // `/some/path//`
  //
  // but not:
  // `/some/path` the end slash in the path makes it strict
  // `/some/path/subdir`
});

// paths that do not end with slash are not strict
// this means that the trailing slash is optional
// and they match regardless
Route route2 = router.route().path("/some/path");

route2.handler(ctx -> {
  // This handler will be called for the following request paths:

  // `/some/path`
  // `/some/path/`
  // `/some/path//`
  //
  // but not:
  // `/some/path/subdir`
});

Routing by paths that begin with something

Often you want to route all requests that begin with a certain path. You could use a regex to do this, but a simply way is to use an asterisk * at the end of the path when declaring the route path.

In the following example the handler will be called for any request with a URI path that starts with /some/path/.

For example /some/path/foo.html and /some/path/otherdir/blah.css would both match.

Route route = router.route().path("/some/path/*");

route.handler(ctx -> {
  // This handler will be called for any path that starts with
  // `/some/path/`, e.g.

  // `/some/path/`
  // `/some/path/subdir`
  // `/some/path/subdir/blah.html`
  //
  // but **ALSO**:
  // `/some/path` the final slash is always optional with a wildcard to preserve
  //              compatibility with many client libraries.
  // but **NOT**:
  // `/some/patha`
  // `/some/patha/`
  // etc...
});

With any path it can also be specified when creating the route:

Route route = router.route("/some/path/*");

route.handler(ctx -> {
  // This handler will be called same as previous example
});

Capturing path parameters

It’s possible to match paths using placeholders for parameters which are then available in the context pathParam.

Here’s an example

router
  .route(HttpMethod.POST, "/catalogue/products/:productType/:productID/")
  .handler(ctx -> {

    String productType = ctx.pathParam("productType");
    String productID = ctx.pathParam("productID");

    // Do something with them...
  });

The placeholders consist of : followed by the parameter name. Parameter names consist of any alphabetic character, numeric character or underscore. In certain cases this is a bit limited, so users may switch to an extended name rule which includes 2 extra characters - and $. The extended param rule is enabled as a system property:

-Dio.vertx.web.route.param.extended-pattern=true

In the above example, if a POST request is made to path: /catalogue/products/tools/drill123/ then the route will match and productType will receive the value tools and productID will receive the value drill123.

A parameter is not required to be a path segment. For example path parameters like the following ones are valid too:

router
  .route(HttpMethod.GET, "/flights/:from-:to")
  .handler(ctx -> {
    // when handling requests to /flights/AMS-SFO will set:
    String from = ctx.pathParam("from"); // AMS
    String to = ctx.pathParam("to"); // SFO
    // remember that this will not work as expected is the parameter
    // naming pattern in use is the "extended" one. That is because in
    // that case "-" is considered to be part of the variable name and
    // not a separator.
  });

Note: You can also capture as path param .

Routing with regular expressions

Regular expressions can also be used to match URI paths in routes.

Route route = router.route().pathRegex(".*foo");

route.handler(ctx -> {

  // This handler will be called for:

  // /some/path/foo
  // /foo
  // /foo/bar/wibble/foo
  // /bar/foo

  // But not:
  // /bar/wibble
});

Alternatively the regex can be specified when creating the route:

Route route = router.routeWithRegex(".*foo");

route.handler(ctx -> {

  // This handler will be called same as previous example

});

Capturing path parameters with regular expressions

You can also capture path parameters when using regular expressions, here’s an example:

Route route = router.routeWithRegex(".*foo");

// This regular expression matches paths that start with something like:
// "/foo/bar" - where the "foo" is captured into param0 and the "bar" is
// captured into param1
route.pathRegex("\\/([^\\/]+)\\/([^\\/]+)").handler(ctx -> {

  String productType = ctx.pathParam("param0");
  String productID = ctx.pathParam("param1");

  // Do something with them...
});

In the above example, if a request is made to path: /tools/drill123/ then the route will match and productType will receive the value tools and productID will receive the value drill123.

Captures are denoted in regular expressions with capture groups (i.e. surrounding the capture with round brackets)

Using named capture groups

Using int index param names might be troublesome in some cases. It’s possible to use named capture groups in the regex path.

router
  .routeWithRegex("\\/(?<productType>[^\\/]+)\\/(?<productID>[^\\/]+)")
  .handler(ctx -> {

    String productType = ctx.pathParam("productType");
    String productID = ctx.pathParam("productID");

    // Do something with them...
  });

In the example above, named capture groups are mapped to path parameters of the same name as the group.

Additionally, you can still access group parameters as you would with normal groups (i.e. params0, params1…​)

Routing by HTTP method

By default a route will match all HTTP methods.

If you want a route to only match for a specific HTTP method you can use method

Route route = router.route().method(HttpMethod.POST);

route.handler(ctx -> {

  // This handler will be called for any POST request

});

Or you can specify this with a path when creating the route:

Route route = router.route(HttpMethod.POST, "/some/path/");

route.handler(ctx -> {
  // This handler will be called for any POST request
  // to a URI path starting with /some/path/
});

If you want to route for a specific HTTP method you can also use the methods such as get, post and put named after the HTTP method name. For example:

router.get().handler(ctx -> {

  // Will be called for any GET request

});

router.get("/some/path/").handler(ctx -> {

  // Will be called for any GET request to a path
  // starting with /some/path

});

router.getWithRegex(".*foo").handler(ctx -> {

  // Will be called for any GET request to a path
  // ending with `foo`

});

If you want to specify a route will match for more than HTTP method you can call method multiple times:

Route route = router.route().method(HttpMethod.POST).method(HttpMethod.PUT);

route.handler(ctx -> {

  // This handler will be called for any POST or PUT request

});

If you are creating an application that require custom HTTP verbs, for example, an WebDav server, then you can specify custom verbs like:

Route route = router.route()
  .method(HttpMethod.valueOf("MKCOL"))
  .handler(ctx -> {
    // This handler will be called for any MKCOL request
  });
Note
It is important to notice that features such as rerouting will not accept custom http methods and inspecting the route verbs will yield the enumeration value OTHER instead of the custom name.

Route order

By default routes are matched in the order they are added to the router.

When a request arrives the router will step through each route and check if it matches, if it matches then the handler for that route will be called.

If the handler subsequently calls next the handler for the next matching route (if any) will be called. And so on.

Here’s an example to illustrate this:

router
  .route("/some/path/")
  .handler(ctx -> {

    HttpServerResponse response = ctx.response();
    // enable chunked responses because we will be adding data as
    // we execute over other handlers. This is only required once and
    // only if several handlers do output.
    response.setChunked(true);

    response.write("route1\n");

    // Now call the next matching route
    ctx.next();
  });

router
  .route("/some/path/")
  .handler(ctx -> {

    HttpServerResponse response = ctx.response();
    response.write("route2\n");

    // Now call the next matching route
    ctx.next();
  });

router
  .route("/some/path/")
  .handler(ctx -> {

    HttpServerResponse response = ctx.response();
    response.write("route3");

    // Now end the response
    ctx.response().end();
  });

In the above example the response will contain:

route1
route2
route3

As the routes have been called in that order for any request that starts with /some/path.

If you want to override the default ordering for routes, you can do so using order, specifying an integer value.

Routes are assigned an order at creation time corresponding to the order in which they were added to the router, with the first route numbered 0, the second route numbered 1, and so on.

By specifying an order for the route you can override the default ordering. Order can also be negative, e.g. if you want to ensure a route is evaluated before route number 0.

Let’s change the ordering of route2 so it runs before route1:

router
  .route("/some/path/")
  .order(1)
  .handler(ctx -> {

    HttpServerResponse response = ctx.response();
    response.write("route1\n");

    // Now call the next matching route
    ctx.next();
  });

router
  .route("/some/path/")
  .order(0)
  .handler(ctx -> {

    HttpServerResponse response = ctx.response();
    // enable chunked responses because we will be adding data as
    // we execute over other handlers. This is only required once and
    // only if several handlers do output.
    response.setChunked(true);

    response.write("route2\n");

    // Now call the next matching route
    ctx.next();
  });

router
  .route("/some/path/")
  .order(2)
  .handler(ctx -> {

    HttpServerResponse response = ctx.response();
    response.write("route3");

    // Now end the response
    ctx.response().end();
  });

then the response will now contain:

route2
route1
route3

If two matching routes have the same value of order, then they will be called in the order they were added.

You can also specify that a route is handled last, with last

Note: Route order can be specified only before you configure an handler!

Routing based on MIME type of request

You can specify that a route will match against matching request MIME types using consumes.

In this case, the request will contain a content-type header specifying the MIME type of the request body. This will be matched against the value specified in consumes.

Basically, consumes is describing which MIME types the handler can consume.

Matching can be done on exact MIME type matches:

router.route()
  .consumes("text/html")
  .handler(ctx -> {

    // This handler will be called for any request with
    // content-type header set to `text/html`

  });

Multiple exact matches can also be specified:

router.route()
  .consumes("text/html")
  .consumes("text/plain")
  .handler(ctx -> {

    // This handler will be called for any request with
    // content-type header set to `text/html` or `text/plain`.

  });

Matching on wildcards for the sub-type is supported:

router.route()
  .consumes("text/*")
  .handler(ctx -> {

    // This handler will be called for any request
    // with top level type `text` e.g. content-type
    // header set to `text/html` or `text/plain`
    // will both match

  });

And you can also match on the top level type

router.route()
  .consumes("*/json")
  .handler(ctx -> {

    // This handler will be called for any request with sub-type json
    // e.g. content-type header set to `text/json` or
    // `application/json` will both match

  });

If you don’t specify a / in the consumers, it will assume you meant the sub-type.

Routing based on MIME types acceptable by the client

The HTTP accept header is used to signify which MIME types of the response are acceptable to the client.

An accept header can have multiple MIME types separated by ‘,’.

MIME types can also have a q value appended to them* which signifies a weighting to apply if more than one response MIME type is available matching the accept header. The q value is a number between 0 and 1.0. If omitted it defaults to 1.0.

For example, the following accept header signifies the client will accept a MIME type of only text/plain:

Accept: text/plain

With the following the client will accept text/plain or text/html with no preference.

Accept: text/plain, text/html

With the following the client will accept text/plain or text/html but prefers text/html as it has a higher q value (the default value is q=1.0)

Accept: text/plain; q=0.9, text/html

If the server can provide both text/plain and text/html it should provide the text/html in this case.

By using produces you define which MIME type(s) the route produces, e.g. the following handler produces a response with MIME type application/json.

router.route()
  .produces("application/json")
  .handler(ctx -> {

    HttpServerResponse response = ctx.response();
    response.putHeader("content-type", "application/json");
    response.end(someJSON);

  });

In this case the route will match with any request with an accept header that matches application/json.

Here are some examples of accept headers that will match:

Accept: application/json Accept: application/* Accept: application/json, text/html Accept: application/json;q=0.7, text/html;q=0.8, text/plain

You can also mark your route as producing more than one MIME type. If this is the case, then you use getAcceptableContentType to find out the actual MIME type that was accepted.

router.route()
  .produces("application/json")
  .produces("text/html")
  .handler(ctx -> {

    HttpServerResponse response = ctx.response();

    // Get the actual MIME type acceptable
    String acceptableContentType = ctx.getAcceptableContentType();

    response.putHeader("content-type", acceptableContentType);
    response.end(whatever);
  });

In the above example, if you sent a request with the following accept header:

Accept: application/json; q=0.7, text/html

Then the route would match and acceptableContentType would contain text/html as both are acceptable but that has a higher q value.

Routing based on VirtualHost

You can configure that a Route will match against the request hostname.

Request are checked against the Host header to a match and patterns allow the usage of wildcards, as for example .vertx.io or fully domain names as www.vertx.io.

router.route().virtualHost("*.vertx.io").handler(ctx -> {
  // do something if the request is for *.vertx.io
});

Combining routing criteria

You can combine all the above routing criteria in many different ways, for example:

router.route(HttpMethod.PUT, "myapi/orders")
  .consumes("application/json")
  .produces("application/json")
  .handler(ctx -> {

    // This would be match for any PUT method to paths starting
    // with "myapi/orders" with a content-type of "application/json"
    // and an accept header matching "application/json"

  });

Enabling and disabling routes

You can disable a route with disable. A disabled route will be ignored when matching.

You can re-enable a disabled route with enable

Forward Support

Your application may be behind a proxy server, HAProxy for example. When working under this setup accessing the client connection details will not properly return the expected results. For example the client host ip address will be the proxy server ip address, not the client’s one.

In order to get the right connection information, a special header Forward has been standardized to include the right information. However this standard is not very old, so many proxies out there have been using other headers that usually start with the prefix: X-Forward. Vert.x web allows the usage and parsing of these headers but not by default.

The reason why these headers are disabled by default is to prevent malicious applications to forge their origin and hide where they are really coming from.

As previously mentioned forward is disabled by default, to enable you should use:

router.allowForward(AllowForwardHeaders.FORWARD);

// we can now allow forward header parsing
// and in this case only the "X-Forward" headers will be considered
router.allowForward(AllowForwardHeaders.X_FORWARD);

// we can now allow forward header parsing
// and in this case both the "Forward" header and "X-Forward" headers
// will be considered, yet the values from "Forward" take precedence
// this means if case of a conflict (2 headers for the same value)
// the "Forward" value will be taken and the "X-Forward" ignored.
router.allowForward(AllowForwardHeaders.ALL);

Same rule applies to explicitly disable the parsing of the headers:

router.allowForward(AllowForwardHeaders.NONE);

To read more about the format of the header format, please consult:

Behind the scenes, what this feature does is changing the following values of your connection (either HTTP or WebSocket):

  • protocol

  • host name

  • host port

Context data

You can use the context data in the RoutingContext to maintain any data that you want to share between handlers for the lifetime of the request.

Here’s an example where one handler sets some data in the context data and a subsequent handler retrieves it:

You can use the put to put any object, and get to retrieve any object from the context data.

A request sent to path /some/path/other will match both routes.

router.get("/some/path").handler(ctx -> {

  ctx.put("foo", "bar");
  ctx.next();

});

router.get("/some/path/other").handler(ctx -> {

  String bar = ctx.get("foo");
  // Do something with bar
  ctx.response().end();

});

Alternatively you can access the entire context data map with data.

Helper functions

While the routing context will allow you to access the underlying request and response objects, sometimes it will be more productive if a few shortcuts would be present to help with common tasks. A few helpers are present in the context to facilitate with this task.

Serve an "attachment", an attachment is a response that will trigger the browser to open the response on the OS application configured to handle a specific mime type. Imagine you’re generating a PDF:

ctx
  .attachment("weekly-report.pdf")
  .end(pdfBuffer);

Perform a redirect to a different page or host. One example is to redirect to an HTTPS variant of the application:

ctx.redirect("https://securesite.com/");

// there is a special handling for the target "back".
// In this case the redirect would send the user to the
// referrer url or "/" if there's no referrer.

ctx.redirect("back");

Send a JSON response to the client:

ctx.json(new JsonObject().put("hello", "vert.x"));
// also applies to arrays
ctx.json(new JsonArray().add("vertx").add("web"));
// or any object that will be converted according
// to the json encoder available at runtime.
ctx.json(someObject);

Simple content type check:

ctx.is("html"); // => true
ctx.is("text/html"); // => true

// When Content-Type is application/json
ctx.is("application/json"); // => true
ctx.is("html"); // => false

Verify if a request is "fresh" with respect to the cache headers and the current values of last modified/ etag.

ctx.lastModified("Wed, 13 Jul 2011 18:30:00 GMT");
// this will now be used to verify the freshness of the request
if (ctx.isFresh()) {
  // client cache value is fresh perhaps we
  // can stop and return 304?
}

And a few other simple self explanatory shortcuts:

ctx.etag("W/123456789");

// set the last modified value
ctx.lastModified("Wed, 13 Jul 2011 18:30:00 GMT");

// quickly end
ctx.end();
ctx.end("body");
ctx.end(buffer);

Reroute

Until now all routing mechanism allow you to handle your requests in a sequential way, however there might be times where you will want to go back. Since the context does not expose any information about the previous or next handler, mostly because this information is dynamic there is a way to restart the whole routing from the start of the current Router.

router.get("/some/path").handler(ctx -> {

  ctx.put("foo", "bar");
  ctx.next();

});

router
  .get("/some/path/B")
  .handler(ctx -> ctx.response().end());

router
  .get("/some/path")
  .handler(ctx -> ctx.reroute("/some/path/B"));

So from the code you can see that if a request arrives at /some/path if first add a value to the context, then moves to the next handler that re routes the request to /some/path/B which terminates the request.

You can reroute based on a new path or based on a new path and method. Note however that rerouting based on method might introduce security issues since for example a usually safe GET request can become a DELETE.

Reroute is also allowed on the failure handler, however due to the nature of re router when called the current status code and failure reason are reset. In order the rerouted handler should generate the correct status code if needed, for example:

router.get("/my-pretty-notfound-handler").handler(ctx -> ctx.response()
  .setStatusCode(404)
  .end("NOT FOUND fancy html here!!!"));

router.get().failureHandler(ctx -> {
  if (ctx.statusCode() == 404) {
    ctx.reroute("/my-pretty-notfound-handler");
  } else {
    ctx.next();
  }
});

It should be clear that reroute works on paths, so if you need to preserve and or add state across reroutes, one should use the RoutingContext object. For example you want to reroute to a new path with a extra parameter:

router.get("/final-target").handler(ctx -> {
  // continue from here...
});

// (Will reroute to /final-target including the query string)
router.get().handler(ctx -> ctx.reroute("/final-target?variable=value"));

// A safer way would be to add the variable to the context
router.get().handler(ctx -> ctx
  .put("variable", "value")
  .reroute("/final-target"));

Reroute will re-parse the query params too. Be aware that previously query params will be discarded. The method will also silently discard and ignore any html fragment from the path. This is to keep the semantics of reroute consistent between a regular request and a re route.

If more information is required to be passed to the new request, it should use the context that is preserved all the lifetime of the HTTP transaction.

Sub-routers

Sometimes if you have a lot of handlers it can make sense to split them up into multiple routers. This is also useful if you want to reuse a set of handlers in a different application, rooted at a different path root.

To do this you can mount a router at a mount point in another router. The router that is mounted is called a sub-router. Sub routers can mount other sub routers so you can have several levels of sub-routers if you like.

Let’s look at a simple example of a sub-router mounted with another router.

This sub-router will maintain the set of handlers that corresponds to a simple fictional REST API. We will mount that on another router. The full implementation of the REST API is not shown.

Here’s the sub-router:

Router restAPI = Router.router(vertx);

restAPI.get("/products/:productID").handler(ctx -> {

  // TODO Handle the lookup of the product....
  ctx.response().write(productJSON);

});

restAPI.put("/products/:productID").handler(ctx -> {

  // TODO Add a new product...
  ctx.response().end();

});

restAPI.delete("/products/:productID").handler(ctx -> {

  // TODO delete the product...
  ctx.response().end();

});

If this router was used as a top level router, then GET/PUT/DELETE requests to urls like /products/product1234 would invoke the API.

However, let’s say we already have a web-site as described by another router:

Router mainRouter = Router.router(vertx);

// Handle static resources
mainRouter.route("/static/*").handler(myStaticHandler);

mainRouter.route(".*\\.templ").handler(myTemplateHandler);

We can now mount the sub router on the main router, against a mount point, in this case /productsAPI

mainRouter.mountSubRouter("/productsAPI", restAPI);

This means the REST API is now accessible via paths like: /productsAPI/products/product1234.

There are a couple of rules that must be fulfilled before sub routers can be used:

  • The route path must end with a wild card

  • Parameters are allowed but full regex patterns not

  • Only 1 handler can be registered before or after this call (but they can on a new route object for the same path)

  • Only 1 router per path object

Validation happens at the time the router is added to the http server. This means that you cannot get any validation error during the build time because of the dynamic nature of sub routers. They depend on the context to be validated.

Localization

Vert.x Web parses the Accept-Language header and provides some helper methods to identify which is the preferred locale for a client or the sorted list of preferred locales by quality.

Route route = router.get("/localized").handler(ctx -> {
  // although it might seem strange by running a loop with a switch we
  // make sure that the locale order of preference is preserved when
  // replying in the users language.
  for (LanguageHeader language : ctx.acceptableLanguages()) {
    switch (language.tag()) {
      case "en":
        ctx.response().end("Hello!");
        return;
      case "fr":
        ctx.response().end("Bonjour!");
        return;
      case "pt":
        ctx.response().end("Olá!");
        return;
      case "es":
        ctx.response().end("Hola!");
        return;
    }
  }
  // we do not know the user language so lets just inform that back:
  ctx.response().end("Sorry we don't speak: " + ctx.preferredLanguage());
});

The main method acceptableLanguages will return the ordered list of locales the user understands, if you’re only interested in the user prefered locale then the helper: preferredLanguage will return the 1st element of the list or null if no locale was provided by the user.

Route match failures

If no routes match for any particular request, Vert.x-Web will signal an error depending on match failure:

  • 404 If no route matches the path

  • 405 If a route matches the path but don’t match the HTTP Method

  • 406 If a route matches the path and the method but It can’t provide a response with a content type matching Accept header

  • 415 If a route matches the path and the method but It can’t accept the Content-type

  • 400 If a route matches the path and the method but It can’t accept an empty body

You can manually manage those failures using errorHandler

Error handling

As well as setting handlers to handle requests you can also set handlers to handle failures in routing.

Failure handlers are used with the exact same route matching criteria that you use with normal handlers.

For example you can provide a failure handler that will only handle failures on certain paths, or for certain HTTP methods.

This allows you to set different failure handlers for different parts of your application.

Here’s an example failure handler that will only be called for failure that occur when routing to GET requests to paths that start with /somepath/:

Route route = router.get("/somepath/*");

route.failureHandler(ctx -> {

  // This will be called for failures that occur
  // when routing requests to paths starting with
  // '/somepath/'

});

Failure routing will occur if a handler throws an exception, or if a handler calls fail specifying an HTTP status code to deliberately signal a failure.

If an exception is caught from a handler this will result in a failure with status code 500 being signalled.

When handling the failure, the failure handler is passed the routing context which also allows the failure or failure code to be retrieved so the failure handler can use that to generate a failure response.

Route route1 = router.get("/somepath/path1/");

route1.handler(ctx -> {

  // Let's say this throws a RuntimeException
  throw new RuntimeException("something happened!");

});

Route route2 = router.get("/somepath/path2");

route2.handler(ctx -> {

  // This one deliberately fails the request passing in the status code
  // E.g. 403 - Forbidden
  ctx.fail(403);

});

// Define a failure handler
// This will get called for any failures in the above handlers
Route route3 = router.get("/somepath/*");

route3.failureHandler(failureRoutingContext -> {

  int statusCode = failureRoutingContext.statusCode();

  // Status code will be 500 for the RuntimeException
  // or 403 for the other failure
  HttpServerResponse response = failureRoutingContext.response();
  response.setStatusCode(statusCode).end("Sorry! Not today");

});

For the eventuality that an error occurs when running the error handler related usage of not allowed characters in status message header, then the original status message will be changed to the default message from the error code. This is a tradeoff to keep the semantics of the HTTP protocol working instead of abruptly creash and close the socket without properly completing the protocol.

Request body handling

The BodyHandler allows you to retrieve request bodies, limit body sizes and handle file uploads.

You should make sure a body handler is on a matching route for any requests that require this functionality.

The usage of this handler requires that it is installed as soon as possible in the router since it needs to install handlers to consume the HTTP request body and this must be done before executing any async call.

router.route().handler(BodyHandler.create());

If an async call is required before, the HttpServerRequest should be paused and then resumed so that the request events are not delivered until the body handler is ready to process them.

router.route().handler(ctx -> {

  HttpServerRequest request = ctx.request();

  // Pause the request
  request.pause();

  someAsyncCall(result -> {

    // Resume the request
    request.resume();

    // And continue processing
    ctx.next();
  });
});

// This body handler will be called for all routes
router.route().handler(BodyHandler.create());
Note
Uploads can be a source of DDoS attacks, in order to reduce the attack surface, it is recommended to set sensible limits on setBodyLimit (e.g.: 10mb for general uploads or 100kb for JSON).

Getting the request body

If you know the request body is JSON, then you can use getBodyAsJson, if you know it’s a string you can use getBodyAsString, or to retrieve it as a buffer use getBody.

Limiting body size

To limit the size of a request body, create the body handler then use setBodyLimit to specifying the maximum body size, in bytes. This is useful to avoid running out of memory with very large bodies.

If an attempt to send a body greater than the maximum size is made, an HTTP status code of 413 - Request Entity Too Large, will be sent.

There is no body limit by default.

Merging form attributes

By default, the body handler will merge any form attributes into the request parameters. If you don’t want this behaviour you can use disable it with setMergeFormAttributes.

Handling file uploads

Body handler is also used to handle multi-part file uploads.

If a body handler is on a matching route for the request, any file uploads will be automatically streamed to the uploads directory, which is file-uploads by default.

Each file will be given an automatically generated file name, and the file uploads will be available on the routing context with fileUploads.

Here’s an example:

router.route().handler(BodyHandler.create());

router.post("/some/path/uploads").handler(ctx -> {

  Set<FileUpload> uploads = ctx.fileUploads();
  // Do something with uploads....

});

Each file upload is described by a FileUpload instance, which allows various properties such as the name, file-name and size to be accessed.

Handling cookies

Vert.x-Web has out of the box cookies support.

Manipulating cookies

You use getCookie to retrieve a cookie by name, or use cookieMap to retrieve the entire set.

To remove a cookie, use removeCookie.

To add a cookie use addCookie.

The set of cookies will be written back in the response automatically when the response headers are written so the browser can store them.

Cookies are described by instances of Cookie. This allows you to retrieve the name, value, domain, path and other normal cookie properties.

Here’s an example of querying and adding cookies:

Cookie someCookie = ctx.getCookie("mycookie");
String cookieValue = someCookie.getValue();

// Do something with cookie...

// Add a cookie - this will get written back in the response automatically
ctx.addCookie(Cookie.cookie("othercookie", "somevalue"));

Handling sessions

Vert.x-Web provides out of the box support for sessions.

Sessions last between HTTP requests for the length of a browser session and give you a place where you can add session-scope information, such as a shopping basket.

Vert.x-Web uses session cookies to identify a session. The session cookie is temporary and will be deleted by your browser when it’s closed.

We don’t put the actual data of your session in the session cookie - the cookie simply uses an identifier to look-up the actual session on the server. The identifier is a random UUID generated using a secure random, so it should be effectively unguessable.

Cookies are passed across the wire in HTTP requests and responses so it’s always wise to make sure you are using HTTPS when sessions are being used. Vert.x will warn you if you attempt to use sessions over straight HTTP.

To enable sessions in your application you must have a SessionHandler on a matching route before your application logic.

The session handler handles the creation of session cookies and the lookup of the session so you don’t have to do that yourself.

Sessions data is saved to a session store automatically after the response headers have been sent to the client. But note that, with this mechanism, there is no guarantee the data is fully persisted before the client receives the response. There are occasions though when this guarantee is needed. In this case you can force a flush. This will disable the automatic saving process, unless the flushing operation failed. This allows to control the state before completing the response like:

ChainAuthHandler chain =
  ChainAuthHandler.any()
    .add(authNHandlerA)
    .add(ChainAuthHandler.all()
      .add(authNHandlerB)
      .add(authNHandlerC));

// secure your route
router.route("/secure/resource").handler(chain);
// your app
router.route("/secure/resource").handler(ctx -> {
  // do something...
});

Vert.x Session Handler state by default uses a cookie to store session ID. Session ID is a unique string, used to recognize individual visitor between visits. But, if client’s web browser doesn’t support cookies or visitor has disabled cookies in web browser’s settings, we can’t store session id on client’s machine. In this case, new session will be created for every request. This behavior is useless because we can’t remember information for certain visitor between two requests. We can say that, by default, sessions can’t work if browser doesn’t support cookies.

Vert.x Web supports sessions without cookies, known as "cookieless" sessions. As an alternative, Vert.x Web can embed session id inside of page URL. On this way, all page links will contain session id string. When visitor clicks on some of these links, it will read session id from page URL, so we don’t need cookies support to have functional sessions.

To enable cookieless sessions:

router.route()
  .handler(SessionHandler.create(store).setCookieless(true));

It is important to know that in this mode the session ID should be passed by the application to the end user, usually by rendering it on the HTML page or script. There are some important rules. The session id is identified by the following pattern on the path /optional/path/prefix/'('sessionId')'/path/suffix.

As an example, given the path: http://localhost:2677/WebSite1/(S(3abhbgwjg33aqrt3uat2kh4d))/api/ the session Id will be: 3abhbgwjg33aqrt3uat2kh4d.

Main security problem when working with sessions is a possibility that malicious user will find out others' session id. If two users share same session id, they share same session variables too and website is considering them as one visitor. This could be a security risk if session is used for any private or sensitive data, or to allow access to restricted areas of web site. When cookies are used, session id can be protected using SSL and by marking a cookie as secure. But, in case of cookieless session, session id is part of URL and is much more vulnerable.

Session stores

To create a session handler you need to have a session store instance. The session store is the object that holds the actual sessions for your application.

The session store is responsible for holding a secure pseudo random number generator in order to guarantee secure session ids. This PRNG is independent of the store which means that given a session id from store A one cannot derive the session id of store B since they have different seeds and states.

By default this PRNG uses a mixed mode, blocking for seeding, non blocking for generating. The PRNG will also reseed every 5 minutes with 64bits of new entropy. However this can all be configured using the system properties:

  • io.vertx.ext.auth.prng.algorithm e.g.: SHA1PRNG

  • io.vertx.ext.auth.prng.seed.interval e.g.: 1000 (every second)

  • io.vertx.ext.auth.prng.seed.bits e.g.: 128

Most users should not need to configure these values unless if you notice that the performance of your application is being affected by the PRNG algorithm.

Vert.x-Web comes with two session store implementations out of the box, and you can also write your own if you prefer.

The implementations are expected to follow the ServiceLoader conventions and all stores that are available at runtime from the classpath will be exposed. When more than 1 implementations are available the first one that can be instantiated and configured with success becomes the default. If none is available, then the default depends on the mode Vert.x was created. If cluster mode is available the the clustered session store is the default otherwise the local storage is the default.

Local session store

With this store, sessions are stored locally in memory and only available in this instance.

This store is appropriate if you have just a single Vert.x instance of you are using sticky sessions in your application and have configured your load balancer to always route HTTP requests to the same Vert.x instance.

If you can’t ensure your requests will all terminate on the same server then don’t use this store as your requests might end up on a server which doesn’t know about your session.

Local session stores are implemented by using a shared local map, and have a reaper which clears out expired sessions.

The reaper interval can be configured with a json message with the key: reaperInterval.

Here are some examples of creating a local SessionStore

SessionStore store1 = LocalSessionStore.create(vertx);

// Create a local session store specifying the local shared map name to use
// This might be useful if you have more than one application in the same
// Vert.x instance and want to use different maps for different applications
SessionStore store2 = LocalSessionStore.create(
  vertx,
  "myapp3.sessionmap");

// Create a local session store specifying the local shared map name to use and
// setting the reaper interval for expired sessions to 10 seconds
SessionStore store3 = LocalSessionStore.create(
  vertx,
  "myapp3.sessionmap",
  10000);

Clustered session store

With this store, sessions are stored in a distributed map which is accessible across the Vert.x cluster.

This store is appropriate if you’re not using sticky sessions, i.e. your load balancer is distributing different requests from the same browser to different servers.

Your session is accessible from any node in the cluster using this store.

To you use a clustered session store you should make sure your Vert.x instance is clustered.

Here are some examples of creating a clustered SessionStore

Vertx.clusteredVertx(new VertxOptions(), res -> {

  Vertx vertx = res.result();

  // Create a clustered session store using defaults
  SessionStore store1 = ClusteredSessionStore.create(vertx);

  // Create a clustered session store specifying the distributed map name to use
  // This might be useful if you have more than one application in the cluster
  // and want to use different maps for different applications
  SessionStore store2 = ClusteredSessionStore.create(
    vertx,
    "myclusteredapp3.sessionmap");
});

Other stores

Other stores are also available, these stores can be used by importing the correct jar to the project. One example of such stores is the cookie store. This store has the advantage that it requires no backend or server side state, which can be useful it some situations BUT all session data will be sent back to the client in the Cookie, so if you need to store private information this should not be used.

This store is appropriate if you’re using sticky sessions, i.e. your load balancer is distributing different requests from the same browser to different servers.

As the session is stored in the Cookie, this means sessions survive server crashes too.

A second known implementation is the Redis session store. This store works just like the normal cluster store, however just like it’s name suggests, it uses a redis backend to keep the session data centralized.

These stores are available with the coordinates:

  • groupId: io.vertx

  • artifactId: vertx-web-sstore-{cookie|redis}

Creating the session handler

Once you’ve created a session store you can create a session handler, and add it to a route. You should make sure your session handler is routed to before your application handlers.

Here’s an example:

Router router = Router.router(vertx);

// Create a clustered session store using defaults
SessionStore store = ClusteredSessionStore.create(vertx);

SessionHandler sessionHandler = SessionHandler.create(store);

// the session handler controls the cookie used for the session
// this includes configuring, for example, the same site policy
// like this, for strict same site policy.
sessionHandler.setCookieSameSite(CookieSameSite.STRICT);

// Make sure all requests are routed through the session handler too
router.route().handler(sessionHandler);

// Now your application handlers
router.route("/somepath/blah/").handler(ctx -> {

  Session session = ctx.session();
  session.put("foo", "bar");
  // etc

});

The session handler will ensure that your session is automatically looked up (or created if no session exists) from the session store and set on the routing context before it gets to your application handlers.

Using the session

In your handlers you can access the session instance with session.

You put data into the session with put, you get data from the session with get, and you remove data from the session with remove.

The keys for items in the session are always strings. The values can be any type for a local session store, and for a clustered session store they can be any basic type, or Buffer, JsonObject, JsonArray or a serializable object, as the values have to serialized across the cluster.

Here’s an example of manipulating session data:

router.route().handler(sessionHandler);

// Now your application handlers
router.route("/somepath/blah").handler(ctx -> {

  Session session = ctx.session();

  // Put some data from the session
  session.put("foo", "bar");

  // Retrieve some data from a session
  int age = session.get("age");

  // Remove some data from a session
  JsonObject obj = session.remove("myobj");

});

Sessions are automatically written back to the store after after responses are complete.

You can manually destroy a session using destroy. This will remove the session from the context and the session store. Note that if there is no session a new one will be automatically created for the next request from the browser that’s routed through the session handler.

Session timeout

Sessions will be automatically timed out if they are not accessed for a time greater than the timeout period. When a session is timed out, it is removed from the store.

Sessions are automatically marked as accessed when a request arrives and the session is looked up and and when the response is complete and the session is stored back in the store.

You can also use setAccessed to manually mark a session as accessed.

The session timeout can be configured when creating the session handler. Default timeout is 30 minutes.

Authentication / authorization

Vert.x comes with some out-of-the-box handlers for handling both authentication and authorization. In vert.x web the meanings for the 2 words are:

  • Authentication - Tells who the user is

  • Authorization - Tells what the user is allowed to do

While Authentication is tightened to a well known protocol, e.g.:

  • HTTP Basic Authentication

  • HTTP Digest Authentication

  • OAuth2 Authentication

  • …​

Authorization in vert.x is quite generic and can be used regardless of the prior. Yet it is also possible and a valid use case to use the same provider module for both cases.

Creating an Authentication handler

To create an auth handler you need an instance of AuthenticationProvider. Authentication provider is used for authentication of users. Vert.x provides several authentication provider instances out of the box in the vertx-auth project. For full information on auth providers and how to use and configure them please consult the auth documentation.

Here’s a simple example of creating a basic auth handler given an auth provider.

router.route().handler(SessionHandler.create(LocalSessionStore.create(vertx)));

AuthenticationHandler basicAuthHandler = BasicAuthHandler.create(authProvider);

Handling authentication in your application

Let’s say you want all requests to paths that start with /private/ to be subject to authentication. To do that you make sure your authentication handler is before your application handlers on those paths:

router.route().handler(SessionHandler.create(LocalSessionStore.create(vertx)));

AuthenticationHandler basicAuthHandler = BasicAuthHandler.create(authProvider);

// All requests to paths starting with '/private/' will be protected
router.route("/private/*").handler(basicAuthHandler);

router.route("/someotherpath").handler(ctx -> {

  // This will be public access - no login required

});

router.route("/private/somepath").handler(ctx -> {

  // This will require a login

  // This will have the value true
  boolean isAuthenticated = ctx.user() != null;

});

If the authentication handler has successfully authenticated the user it will inject a User object into the RoutingContext so it’s available in your handlers with: user.

If you want your User object to be stored in the session so it’s available between requests so you don’t have to authenticate on each request, then you should make sure you have a session handler before the authentication handler.

Once you have your user object you can also programmatically use the methods on it to authorize the user.

If you want to cause the user to be logged out you can call clearUser on the routing context.

HTTP Basic Authentication

HTTP Basic Authentication is a simple means of authentication that can be appropriate for simple applications.

With basic authentication, credentials are sent unencrypted across the wire in HTTP headers so it’s essential that you serve your application using HTTPS not HTTP.

With basic authentication, if a user requests a resource that requires authentication, the basic auth handler will send back a 401 response with the header WWW-Authenticate set. This prompts the browser to show a log-in dialogue and prompt the user to enter their username and password.

The request is made to the resource again, this time with the Authorization header set, containing the username and password encoded in Base64.

When the basic auth handler receives this information, it calls the configured AuthenticationProvider with the username and password to authenticate the user. If the authentication is successful then the routing of the request is allowed to continue to the application handlers, otherwise a 403 response is returned to signify that access is denied.

Redirect authentication handler

With redirect authentication handling the user is redirected to towards a login page in the case they are trying to access a protected resource and they are not logged in.

The user then fills in the login form and submits it. This is handled by the server which authenticates the user and, if authenticated redirects the user back to the original resource.

To use redirect auth you configure an instance of RedirectAuthHandler instead of a basic authentication handler.

You will also need to setup handlers to serve your actual login page, and a handler to handle the actual login itself. To handle the login we provide a prebuilt handler FormLoginHandler for the purpose.

Here’s an example of a simple app, using a redirect auth handler on the default redirect url /loginpage.

router.route().handler(SessionHandler.create(LocalSessionStore.create(vertx)));

// All requests to paths starting with '/private/' will be protected
router
  .route("/private/*")
  .handler(RedirectAuthHandler.create(authProvider));

// Handle the actual login
// One of your pages must POST form login data
router.post("/login").handler(FormLoginHandler.create(authProvider));

// Set a static server to serve static resources, e.g. the login page
router.route().handler(StaticHandler.create());

router
  .route("/someotherpath")
  .handler(ctx -> {
    // This will be public access - no login required
  });

router
  .route("/private/somepath")
  .handler(ctx -> {

    // This will require a login

    // This will have the value true
    boolean isAuthenticated = ctx.user() != null;

  });

JWT authentication

With JWT authentication resources can be protected by means of permissions and users without enough rights are denied access. You need to add the io.vertx:vertx-auth-jwt:4.0.3 dependency to use JWTAuthProvider

To use this handler there are 2 steps involved:

  • Setup an handler to issue tokens (or rely on a 3rd party)

  • Setup the handler to filter the requests

Please note that these 2 handlers should be only available on HTTPS, not doing so allows sniffing the tokens in transit which leads to session hijacking attacks.

Here’s an example on how to issue tokens:

Router router = Router.router(vertx);

JWTAuthOptions authConfig = new JWTAuthOptions()
  .setKeyStore(new KeyStoreOptions()
    .setType("jceks")
    .setPath("keystore.jceks")
    .setPassword("secret"));

JWTAuth jwt = JWTAuth.create(vertx, authConfig);

router.route("/login").handler(ctx -> {
  // this is an example, authentication should be done with another provider...
  if (
    "paulo".equals(ctx.request().getParam("username")) &&
      "secret".equals(ctx.request().getParam("password"))) {
    ctx.response()
      .end(jwt.generateToken(new JsonObject().put("sub", "paulo")));
  } else {
    ctx.fail(401);
  }
});

Now that your client has a token all it is required is that for all consequent request the HTTP header Authorization is filled with: Bearer <token> e.g.:

Router router = Router.router(vertx);

JWTAuthOptions authConfig = new JWTAuthOptions()
  .setKeyStore(new KeyStoreOptions()
    .setType("jceks")
    .setPath("keystore.jceks")
    .setPassword("secret"));

JWTAuth authProvider = JWTAuth.create(vertx, authConfig);

router.route("/protected/*").handler(JWTAuthHandler.create(authProvider));

router.route("/protected/somepage").handler(ctx -> {
  // some handle code...
});

JWT allows you to add any information you like to the token itself. By doing this there is no state in the server which allows you to scale your applications without need for clustered session data. In order to add data to the token, during the creation of the token just add data to the JsonObject parameter:

JWTAuthOptions authConfig = new JWTAuthOptions()
  .setKeyStore(new KeyStoreOptions()
    .setType("jceks")
    .setPath("keystore.jceks")
    .setPassword("secret"));

JWTAuth authProvider = JWTAuth.create(vertx, authConfig);

authProvider
  .generateToken(
    new JsonObject()
      .put("sub", "paulo")
      .put("someKey", "some value"),
    new JWTOptions());

And the same when consuming:

Handler<RoutingContext> handler = ctx -> {
  String theSubject = ctx.user().principal().getString("sub");
  String someKey = ctx.user().principal().getString("someKey");
};

Configuring authorization

Until now all examples were covering authentication. Authorization is the next logical step when dealing with user. While authentication was really specific to the protocol, authorization is independent, all information is extracted from the User object.

Before this is possible there is a need to load the authorizations to this same object. In order to do this the AuthorizationHandler should be used. An authorization handler will load all known authorizations from a given AuthorizationProvider.

router.route().handler(
  // create the handler that will perform the attestation
  AuthorizationHandler.create(
    // what to attest
    PermissionBasedAuthorization.create("can-do-work"))
    // where to lookup the authorizations for the user
    .addAuthorizationProvider(authProvider));

The lookup can be performed on more than 1 source, just keep adding addAuthorizationProvider(provider) to the handler.

Here’s an example of configuring an app so that different authorities are required for different parts of the app. Note that the meaning of the authorities is determined by the underlying auth provider that you use. E.g. some may support a role/permission based model but others might use another model.

router.route("/listproducts/*").handler(
  // create the handler that will perform the attestation
  AuthorizationHandler.create(
    // what to attest
    PermissionBasedAuthorization.create("list_products"))
    // where to lookup the authorizations for the user
    .addAuthorizationProvider(authProvider));

// Only "admin" has access to /private/settings
router.route("/private/settings/*").handler(
  // create the handler that will perform the attestation
  AuthorizationHandler.create(
    // what to attest
    RoleBasedAuthorization.create("admin"))
    .addAuthorizationProvider(authProvider));

Chaining multiple authentication handlers

There are times when you want to support multiple authentication mechanisms in a single application. For this you can use the ChainAuthHandler. The chain auth handler will attempt to perform authentication on a chain of handlers.

It is important to know that some handlers require specific providers, for example:

So it is not expected that the providers will be shared across all handlers. There are cases where one can share the provider across handlers, for example:

So say that you want to create an application that accepts both HTTP Basic Authentication and Form Redirect. You would start configuring your chain as:

ChainAuthHandler chain = ChainAuthHandler.any();

// add http basic auth handler to the chain
chain.add(BasicAuthHandler.create(provider));
// add form redirect auth handler to the chain
chain.add(RedirectAuthHandler.create(provider));

// secure your route
router.route("/secure/resource").handler(chain);
// your app
router.route("/secure/resource").handler(ctx -> {
  // do something...
});

So when a user makes a request without a Authorization header, this means that the chain will fail to authenticate with the basic auth handler and will attempt to authenticate with the redirect handler. Since the redirect handler always redirects you will be sent to the login form that you configured in that handler.

Like the normal routing in vertx-web, auth chaning is a sequence, so if you would prefer to fallback to your browser asking for the user credentials using HTTP Basic authentication instead of the redirect all you need to to is reverse the order of appending to the chain.

Now assume that you make a request where you provide the header Authorization with the value Basic [token]. In this case the basic auth handler will attempt to authenticate and if it is sucessful the chain will stop and vertx-web will continue to process your handlers. If the token is not valid, for example bad username/password, then the chain will continue to the following entry. In this specific case the redirect auth handler.

Complex chaining is also possible, for example, building logic sequences such as: HandlerA OR (HandlerB AND HandlerC).

ChainAuthHandler chain =
  ChainAuthHandler.any()
    .add(authNHandlerA)
    .add(ChainAuthHandler.all()
      .add(authNHandlerB)
      .add(authNHandlerC));

// secure your route
router.route("/secure/resource").handler(chain);
// your app
router.route("/secure/resource").handler(ctx -> {
  // do something...
});

Serving static resources

Vert.x-Web comes with an out of the box handler for serving static web resources so you can write static web servers very easily.

To serve static resources such as .html, .css, .js or any other static resource, you use an instance of StaticHandler.

Any requests to paths handled by the static handler will result in files being served from a directory on the file system or from the classpath. The default static file directory is webroot but this can be configured.

In the following example all requests to paths starting with /static/ will get served from the directory webroot:

router.route("/static/*").handler(StaticHandler.create());

For example, if there was a request with path /static/css/mystyles.css the static serve will look for a file in the directory webroot/css/mystyle.css.

It will also look for a file on the classpath called webroot/css/mystyle.css. This means you can package up all your static resources into a jar file (or fatjar) and distribute them like that.

When Vert.x finds a resource on the classpath for the first time it extracts it and caches it in a temporary directory on disk so it doesn’t have to do this each time.

The handler will handle range aware requests. When a client makes a request to a static resource, the handler will notify that it can handle range aware request by stating the unit on the Accept-Ranges header. Further requests that contain the Range header with the correct unit and start and end indexes will then receive partial responses with the correct Content-Range header.

Configuring caching

By default the static handler will set cache headers to enable browsers to effectively cache files.

Vert.x-Web sets the headers cache-control,last-modified, and date.

cache-control is set to max-age=86400 by default. This corresponds to one day. This can be configured with setMaxAgeSeconds if required.

If a browser sends a GET or a HEAD request with an if-modified-since header and the resource has not been modified since that date, a 304 status is returned which tells the browser to use its locally cached resource.

If handling of cache headers is not required, it can be disabled with setCachingEnabled.

When cache handling is enabled Vert.x-Web will cache the last modified date of resources in memory, this avoids a disk hit to check the actual last modified date every time.

Entries in the cache have an expiry time, and after that time, the file on disk will be checked again and the cache entry updated.

If you know that your files never change on disk, then the cache entry will effectively never expire. This is the default.

If you know that your files might change on disk when the server is running then you can set files read only to false with setFilesReadOnly.

To enable the maximum number of entries that can be cached in memory at any one time you can use setMaxCacheSize.

To configure the expiry time of cache entries you can use setCacheEntryTimeout.

Configuring the index page

Any requests to the root path / will cause the index page to be served. By default the index page is index.html. This can be configured with setIndexPage.

Changing the web root

By default static resources will be served from the directory webroot. To configure this use setWebRoot.

Serving hidden files

By default the serve will serve hidden files (files starting with .).

If you do not want hidden files to be served you can configure it with setIncludeHidden.

Directory listing

The server can also perform directory listing. By default directory listing is disabled. To enabled it use setDirectoryListing.

When directory listing is enabled the content returned depends on the content type in the accept header.

For text/html directory listing, the template used to render the directory listing page can be configured with setDirectoryTemplate.

Disabling file caching on disk

By default, Vert.x will cache files that are served from the classpath into a file on disk in a sub-directory of a directory called .vertx in the current working directory. This is mainly useful when deploying services as fatjars in production where serving a file from the classpath every time can be slow.

In development this can cause a problem, as if you update your static content while the server is running, the cached file will be served not the updated file.

To disable file caching you can provide your vert.x options the property fileResolverCachingEnabled to false. For backwards compatibility it will also default that value to the system property vertx.disableFileCaching. E.g. you could set up a run configuration in your IDE to set this when running your main class.

CORS handling

Cross Origin Resource Sharing is a safe mechanism for allowing resources to be requested from one domain and served from another.

Vert.x-Web includes a handler CorsHandler that handles the CORS protocol for you.

Here’s an example:

router.route()
  .handler(
    CorsHandler.create("vertx\\.io")
      .allowedMethod(HttpMethod.GET));

router.route().handler(ctx -> {

  // Your app handlers

});

Multi Tenant

There are cases where your application needs to handle more than just 1 tenant. In this case a helper handler is provided that simplifies setting up the application.

In the case the tenant is identified by a HTTP header, say for example X-Tenant, then creating the handler is as simple as:

router.route().handler(MultiTenantHandler.create("X-Tenant"));

You now should register what handler should be executed for the given tenant:

MultiTenantHandler.create("X-Tenant")
  .addTenantHandler("tenant-A", ctx -> {
    // do something for tenant A...
  })
  .addTenantHandler("tenant-B", ctx -> {
    // do something for tenant B...
  })
  // optionally
  .addDefaultHandler(ctx -> {
    // do something when no tenant matches...
  });

This is useful for security situations:

OAuth2Auth gitHubAuthProvider = GithubAuth
  .create(vertx, "CLIENT_ID", "CLIENT_SECRET");

// create a oauth2 handler on our running server
// the second argument is the full url to the callback
// as you entered in your provider management console.
OAuth2AuthHandler githubOAuth2 = OAuth2AuthHandler.create(
  vertx,
  gitHubAuthProvider,
  "https://myserver.com/github-callback");

// setup the callback handler for receiving the GitHub callback
githubOAuth2.setupCallback(router.route());

// create an OAuth2 provider, clientID and clientSecret
// should be requested to Google
OAuth2Auth googleAuthProvider = OAuth2Auth.create(vertx, new OAuth2Options()
  .setClientID("CLIENT_ID")
  .setClientSecret("CLIENT_SECRET")
  .setFlow(OAuth2FlowType.AUTH_CODE)
  .setSite("https://accounts.google.com")
  .setTokenPath("https://www.googleapis.com/oauth2/v3/token")
  .setAuthorizationPath("/o/oauth2/auth"));

// create a oauth2 handler on our domain: "http://localhost:8080"
OAuth2AuthHandler googleOAuth2 = OAuth2AuthHandler.create(
  vertx,
  googleAuthProvider,
  "https://myserver.com/google-callback");

// setup the callback handler for receiving the Google callback
googleOAuth2.setupCallback(router.route());

// At this point the 2 callbacks endpoints are registered:

// /github-callback -> handle github Oauth2 callbacks
// /google-callback -> handle google Oauth2 callbacks

// As the callbacks are made by the IdPs there's no header
// to identify the source, hence the need of custom URLs

// However for out Application we can control it so later
// we can add the right handler for the right tenant

router.route().handler(
  MultiTenantHandler.create("X-Tenant")
    // tenants using github should go this way:
    .addTenantHandler("github", githubOAuth2)
    // tenants using google should go this way:
    .addTenantHandler("google", googleOAuth2)
    // all other should be forbidden
    .addDefaultHandler(ctx -> ctx.fail(401)));

The tenant id can be read at any moment from the context, for example to decide which resource to load, or which database to connect to:

router.route().handler(ctx -> {
  // the default key is "tenant" as defined in
  // MultiTenantHandler.TENANT but this value can be
  // modified at creation time in the factory method
  String tenant = ctx.get(MultiTenantHandler.TENANT);

  switch(tenant) {
    case "google":
      // do something for google users
      break;
    case "github":
      // so something for github users
      break;
  }
});

Multi tenant is a powerful handler that will allow applications to live side by side, however it provides no sandboxing for execution. It should not be used as isolation as wrongly written applications may leak state across tenants.

Templates

Vert.x-Web includes dynamic page generation capabilities by including out of the box support for several popular template engines. You can also easily add your own.

Template engines are described by TemplateEngine. In order to render a template render is used.

The simplest way to use templates is not to call the template engine directly but to use the TemplateHandler. This handler calls the template engine for you based on the path in the HTTP request.

By default the template handler will look for templates in a directory called templates. This can be configured.

The handler will return the results of rendering with a content type of text/html by default. This can also be configured.

When you create the template handler you pass in an instance of the template engine you want. Template engines are not embedded in vertx-web so, you need to configure your project to access them. Configuration is provided for each template engine.

Here are some examples:

TemplateEngine engine = HandlebarsTemplateEngine.create();
TemplateHandler handler = TemplateHandler.create(engine);

// This will route all GET requests starting with /dynamic/ to the template handler
// E.g. /dynamic/graph.hbs will look for a template in /templates/graph.hbs
router.get("/dynamic/*").handler(handler);

// Route all GET requests for resource ending in .hbs to the template handler
router.getWithRegex(".+\\.hbs").handler(handler);

MVEL template engine

To use MVEL, you need to add the following dependency to your project: io.vertx:vertx-web-templ-mvel:4.0.3. Create an instance of the MVEL template engine using: io.vertx.ext.web.templ.mvel.MVELTemplateEngine#create(io.vertx.core.Vertx)

When using the MVEL template engine, it will by default look for templates with the .templ extension if no extension is specified in the file name.

The routing context RoutingContext is available in the MVEL template as the context variable, this means you can render the template based on anything in the context including the request, response, session or context data.

Here are some examples:

The request path is @{context.request().path()}

The variable 'foo' from the session is @{context.session().get('foo')}

The value 'bar' from the context data is @{context.get('bar')}

Please consult the MVEL templates documentation for how to write MVEL templates.

Jade template engine

To use the Jade template engine, you need to add the following dependency to your project: io.vertx:vertx-web-templ-jade:4.0.3. Create an instance of the Jade template engine using: io.vertx.ext.web.templ.jade.JadeTemplateEngine#create(io.vertx.core.Vertx).

When using the Jade template engine, it will by default look for templates with the .jade extension if no extension is specified in the file name.

The routing context RoutingContext is available in the Jade template as the context variable, this means you can render the template based on anything in the context including the request, response, session or context data.

Here are some examples:

!!! 5
html
 head
   title= context.get('foo') + context.request().path()
 body

Please consult the Jade4j documentation for how to write Jade templates.

Handlebars template engine

To use Handlebars, you need to add the following dependency to your project: io.vertx:vertx-web-templ-handlebars:4.0.3. Create an instance of the Handlebars template engine using: io.vertx.ext.web.templ.handlebars.HandlebarsTemplateEngine#create(io.vertx.core.Vertx).

When using the Handlebars template engine, it will by default look for templates with the .hbs extension if no extension is specified in the file name.

Handlebars templates are not able to call arbitrary methods in objects so we can’t just pass the routing context into the template and let the template introspect it like we can with other template engines.

Instead, the context data is available in the template.

If you want to have access to other data like the request path, request params or session data you should add it the context data in a handler before the template handler. For example:

TemplateHandler handler = TemplateHandler.create(engine);

router.get("/dynamic").handler(ctx -> {

  ctx.put("request_path", ctx.request().path());
  ctx.put("session_data", ctx.session().data());

  ctx.next();
});

router.get("/dynamic/").handler(handler);

Please consult the Handlebars Java port documentation for how to write handlebars templates.

Thymeleaf template engine

To use Thymeleaf, you need to add the following dependency to your project: io.vertx:vertx-web-templ-thymeleaf:4.0.3. Create an instance of the Thymeleaf template engine using: io.vertx.ext.web.templ.thymeleaf.ThymeleafTemplateEngine#create(io.vertx.core.Vertx).

When using the Thymeleaf template engine, it will by default look for templates with the .html extension if no extension is specified in the file name.

The routing context RoutingContext is available in the Thymeleaf template as the context variable, this means you can render the template based on anything in the context including the request, response, session or context data.

Here are some examples:

[snip]
<p th:text="${context.get('foo')}"></p>
<p th:text="${context.get('bar')}"></p>
<p th:text="${context.normalizedPath()}"></p>
<p th:text="${context.request().params().get('param1')}"></p>
<p th:text="${context.request().params().get('param2')}"></p>
[snip]

Please consult the Thymeleaf documentation for how to write Thymeleaf templates.

Apache FreeMarker template engine

To use Apache FreeMarker, you need to add the following dependency to your project: io.vertx:vertx-web-templ-freemarker:4.0.3. Create an instance of the Apache FreeMarker template engine using: io.vertx.ext.web.templ.Engine#create().

When using the Apache FreeMarker template engine, it will by default look for templates with the .ftl extension if no extension is specified in the file name.

The routing context RoutingContext is available in the Apache FreeMarker template as the context variable, this means you can render the template based on anything in the context including the request, response, session or context data.

Here are some examples:

[snip]
<p th:text="${context.foo}"></p>
<p th:text="${context.bar}"></p>
<p th:text="${context.normalizedPath()}"></p>
<p th:text="${context.request().params().param1}"></p>
<p th:text="${context.request().params().param2}"></p>
[snip]

Please consult the Apache FreeMarker documentation for how to write Apache FreeMarker templates.

Pebble template engine

To use Pebble, you need to add the following dependency to your project: io.vertx:vertx-web-templ-pebble:4.0.3. Create an instance of the Pebble template engine using: io.vertx.ext.web.templ.pebble.PebbleTemplateEngine#create(vertx).

When using the Pebble template engine, it will by default look for templates with the .peb extension if no extension is specified in the file name.

The routing context RoutingContext is available in the Pebble template as the context variable, this means you can render the template based on anything in the context including the request, response, session or context data.

Here are some examples:

[snip]
<p th:text="{{context.foo}}"></p>
<p th:text="{{context.bar}}"></p>
<p th:text="{{context.normalizedPath()}}"></p>
<p th:text="{{context.request().params().param1}}"></p>
<p th:text="{{context.request().params().param2}}"></p>
[snip]

Please consult the Pebble documentation for how to write Pebble templates.

Rocker template engine

To use Rocker, then add io.vertx:vertx-web-templ-rocker:4.0.3 as a dependency to your project. You can then create a Rocker template engine instance with io.vertx.ext.web.templ.rocker#create().

The values of the JSON context object passed to the render method are then exposed as template parameters. Given:

[snip]
final JsonObject context = new JsonObject()
 .put("foo", "badger")
 .put("bar", "fox")
 .put("context", new JsonObject().put("path", "/foo/bar"));

engine.render(context, "somedir/TestRockerTemplate2", render -> {
 // (...)
});
[snip]

then the template can be as the following somedir/TestRockerTemplate2.rocker.html resource file:

@import io.vertx.core.json.JsonObject
@args (JsonObject context, String foo, String bar)
Hello @foo and @bar
Request path is @context.getString("path")

HTTL template engine

To use HTTL, you need to add the following dependency to your project: io.vertx:vertx-web-templ-httl:4.0.3. Create an instance of the HTTL template engine using: io.vertx.ext.web.templ.httl.HTTLTemplateEngine#create(io.vertx.core.Vertx).

When using the HTTL template engine, it will by default look for templates with the .httl extension if no extension is specified in the file name.

The values of the JSON context object passed to the render method are then exposed as template parameters. Given:

[snip]
TemplateEngine engine = HTTLTemplateEngine.create(vertx);
final JsonObject context = new JsonObject()
 .put("foo", "badger")
 .put("bar", "fox");

engine.render(context, "somedir/test-httl-template1.httl", render -> {
 // (...)
});
[snip]

then the template can be as the following somedir/test-httl-template1.httl resource file:

<!-- #set(String foo, String bar) -->
Hello ${foo} and ${bar}

Please consult the HTTL documentation for how to write HTTL templates.

Rythm template engine

To use Rythm, you need to add the following dependency to your project: io.vertx:vertx-web-templ-rythm:4.0.3. Create an instance of the Rythm template engine using: io.vertx.ext.web.templ.rythm.RythmTemplateEngine#create(io.vertx.core.Vertx).

When using the Rythm template engine, it will by default look for templates with the .html extension if no extension is specified in the file name.

The values of the JSON context object passed to the render method are then exposed as template parameters. Given:

[snip]
TemplateEngine engine = RythmTemplateEngine.create(vertx);
final JsonObject context = new JsonObject()
 .put("foo", "badger")
 .put("bar", "fox");

engine.render(context, "somedir/test-rythm-template1.html", render -> {
 // (...)
});
[snip]

then the template can be as the following somedir/test-rythm-template1.httl resource file:

<!-- #set(String foo, String bar) -->
Hello @foo and @bar

Please consult the RythmEngine documentation for how to write templates.

Caching

Many of the engines support caching of the compiled templates. The cache is stored inside a vert.x shared data local map which allows the engines to share the same cache across several verticles in a efficient and safe way.

Disabling caching

During development you might want to disable template caching so that the template gets reevaluated on each request. In order to do this you need to set the system property: vertxweb.environment or environment variable VERTXWEB_ENVIRONMENT to dev or development. By default caching is always enabled.

Error handler

You can render your own errors using a template handler or otherwise but Vert.x-Web also includes an out of the boxy "pretty" error handler that can render error pages for you.

The handler is ErrorHandler. To use the error handler just set it as a failure handler for any paths that you want covered.

Request logger

Vert.x-Web includes a handler LoggerHandler that you can use to log HTTP requests. You should mount this handler before any handler that could fail the RoutingContext

By default requests are logged to the Vert.x logger which can be configured to use JUL logging, log4j or SLF4J.

Serving favicons

Vert.x-Web includes the handler FaviconHandler especially for serving favicons.

Favicons can be specified using a path to the filesystem, or by default Vert.x-Web will look for a file on the classpath with the name favicon.ico. This means you bundle the favicon in the jar of your application.

Timeout handler

Vert.x-Web includes a timeout handler that you can use to timeout requests if they take too long to process.

This is configured using an instance of TimeoutHandler.

If a request times out before the response is written a 503 response will be returned to the client.

Here’s an example of using a timeout handler which will timeout all requests to paths starting with /foo after 5 seconds:

router.route("/foo/").handler(TimeoutHandler.create(5000));

Response time handler

This handler sets the header x-response-time response header containing the time from when the request was received to when the response headers were written, in ms., e.g.:

x-response-time: 1456ms

Content type handler

The ResponseContentTypeHandler can set the Content-Type header automatically. Suppose we are building a RESTful web application. We need to set the content type in all our handlers:

router
  .get("/api/books")
  .produces("application/json")
  .handler(ctx -> findBooks()
    .onSuccess(books -> ctx.response()
      .putHeader("Content-Type", "application/json")
      .end(toJson(books))).onFailure(ctx::fail));

If the API surface becomes pretty large, setting the content type can become cumbersome. To avoid this situation, add the ResponseContentTypeHandler to the corresponding routes:

router.route("/api/*").handler(ResponseContentTypeHandler.create());
router
  .get("/api/books")
  .produces("application/json")
  .handler(ctx -> findBooks()
    .onSuccess(books -> ctx.response()
      .end(toJson(books))).onFailure(ctx::fail));

The handler gets the approriate content type from getAcceptableContentType. As a consequence, you can easily share the same handler to produce data of different types:

router.route("/api/*").handler(ResponseContentTypeHandler.create());

router
  .get("/api/books")
  .produces("text/xml")
  .produces("application/json")
  .handler(ctx -> findBooks()
    .onSuccess(books -> {
      if (ctx.getAcceptableContentType().equals("text/xml")) {
        ctx.response().end(toXML(books));
      } else {
        ctx.response().end(toJson(books));
      }
    })
    .onFailure(ctx::fail));

SockJS

SockJS is a client side JavaScript library and protocol which provides a simple WebSocket-like interface allowing you to make connections to SockJS servers irrespective of whether the actual browser or network will allow real WebSockets.

It does this by supporting various different transports between browser and server, and choosing one at run-time according to browser and network capabilities.

All this is transparent to you - you are simply presented with the WebSocket-like interface which just works.

Please see the SockJS website for more information on SockJS.

SockJS handler

Vert.x provides an out of the box handler called SockJSHandler for using SockJS in your Vert.x-Web applications.

You should create one handler per SockJS application using SockJSHandler.create. You can also specify configuration options when creating the instance. The configuration options are described with an instance of SockJSHandlerOptions.

Router router = Router.router(vertx);

SockJSHandlerOptions options = new SockJSHandlerOptions()
  .setHeartbeatInterval(2000);

SockJSHandler sockJSHandler = SockJSHandler.create(vertx, options);

Handling SockJS sockets

On the server-side you set a handler on the SockJS handler, and this will be called every time a SockJS connection is made from a client:

The object passed into the handler is a SockJSSocket. This has a familiar socket-like interface which you can read and write to similarly to a NetSocket or a WebSocket. It also implements ReadStream and WriteStream so you can pump it to and from other read and write streams. The RoutingContext is accessible for manual session management while the SockJS connection is loaded using routingContext. With this you can manage the users and sessions accessible through webSession and webUser.

Here’s an example of a simple SockJS handler that simply echoes back any back any data that it reads:

Router router = Router.router(vertx);

SockJSHandlerOptions options = new SockJSHandlerOptions()
  .setHeartbeatInterval(2000);

SockJSHandler sockJSHandler = SockJSHandler.create(vertx, options);

router.mountSubRouter("/myapp", sockJSHandler.socketHandler(sockJSSocket -> {

  // Just echo the data back
  sockJSSocket.handler(sockJSSocket::write);

}));

The client side

In client side JavaScript you use the SockJS client side library to make connections. For convenience the package is available on https://www.npmjs.com/package/sockjs-client.

This means you can refer to it from bundlers or build tools. If however you want to get a CDN version to use directly on your HTML document, first you need to refer to the sockjs dependency:

<html>
<head>
 <script src="https://unpkg.io/[email protected]/dist/sockjs.min.js"></script>
</head>
<body>
 ...
</body>
</html>

Full details for using the SockJS JavaScript client are on the SockJS website, but in summary you use it something like this:

var sock = new SockJS('http://mydomain.com/myapp');

sock.onopen = function() {
 console.log('open');
};

sock.onmessage = function(e) {
 console.log('message', e.data);
};

sock.onevent = function(event, message) {
 console.log('event: %o, message:%o', event, message);
 return true; // in order to signal that the message has been processed
};

sock.onunhandled = function(json) {
 console.log('this message has no address:', json);
};

sock.onclose = function() {
 console.log('close');
};

sock.send('test');

sock.close();

Configuring the SockJS handler

The handler can be configured with various options using SockJSHandlerOptions.

Writing to a SockJS socket over the event bus

When a SockJSSocket is created, it can register an event handler with the event bus. The address of that handler is given by writeHandlerID.

By default, the event handler is not registered. It must enabled in SockJSHandlerOptions.

Router router = Router.router(vertx);

SockJSHandlerOptions options = new SockJSHandlerOptions().setRegisterWriteHandler(true);

SockJSHandler sockJSHandler = SockJSHandler.create(vertx, options);

router.mountSubRouter("/myapp", sockJSHandler.socketHandler(sockJSSocket -> {

  // Retrieve the writeHandlerID and store it (e.g. in a local map)
  String writeHandlerID = sockJSSocket.writeHandlerID();

}));
Note
By default, the handler is registered only locally. It can be made cluster-wide with setLocalWriteHandler.

Then you can write `Buffer`s to the SockJS socket over the event bus.

eventBus.send(writeHandlerID, Buffer.buffer("foo"));

SockJS event bus bridge

Vert.x-Web comes with a built-in SockJS socket handler called the event bus bridge which effectively extends the server-side Vert.x event bus into client side JavaScript.

This creates a distributed event bus which not only spans multiple Vert.x instances on the server side, but includes client side JavaScript running in browsers.

We can therefore create a huge distributed bus encompassing many browsers and servers. The browsers don’t have to be connected to the same server as long as the servers are connected.

This is done by providing a simple client side JavaScript library called vertx-eventbus.js which provides an API very similar to the server-side Vert.x event-bus API, which allows you to send and publish messages to the event bus and register handlers to receive messages.

This JavaScript library uses the JavaScript SockJS client to tunnel the event bus traffic over SockJS connections terminating at at a SockJSHandler on the server-side.

A special SockJS socket handler is then installed on the SockJSHandler which handles the SockJS data and bridges it to and from the server side event bus.

To activate the bridge you simply call bridge on the SockJS handler.

Router router = Router.router(vertx);

SockJSHandler sockJSHandler = SockJSHandler.create(vertx);
SockJSBridgeOptions options = new SockJSBridgeOptions();
// mount the bridge on the router
router.mountSubRouter("/eventbus", sockJSHandler.bridge(options));

In client side JavaScript you use the @vertx/eventbus-bridge-client.js library to create connections to the event bus and to send and receive messages. The library is available on NPM so it can easily be used with bundlers or build tools, but in can easily be used from a CDN (like the sockJS example before):

<script src="https://unpkg.io/[email protected]/dist/sockjs.min.js"></script>
<script src='https://unpkg.io/@vertx/[email protected]/vertx-eventbus.js'></script>

<script>

var eb = new EventBus('http://localhost:8080/eventbus');

eb.onopen = () => {

 // set a handler to receive a message
 eb.registerHandler('some-address', (error, message) => {
   console.log('received a message: ' + JSON.stringify(message));
 });

 // send a message
 eb.send('some-address', {name: 'tim', age: 587});

}

</script>

The first thing the example does is to create a instance of the event bus

var eb = new EventBus('http://localhost:8080/eventbus');

The parameter to the constructor is the URI where to connect to the event bus. Since we create our bridge with the prefix eventbus we will connect there.

You can’t actually do anything with the connection until it is opened. When it is open the onopen handler will be called.

The bridge supports automatic reconnection, with configurable delay and backoff options.

var eb = new EventBus('http://localhost:8080/eventbus');
eb.enableReconnect(true);
eb.onopen = function() {}; // Set up handlers here, will be called on initial connection and all reconnections
eb.onreconnect = function() {}; // Optional, will only be called on reconnections

// Alternatively, pass in an options object
var options = {
   vertxbus_reconnect_attempts_max: Infinity, // Max reconnect attempts
   vertxbus_reconnect_delay_min: 1000, // Initial delay (in ms) before first reconnect attempt
   vertxbus_reconnect_delay_max: 5000, // Max delay (in ms) between reconnect attempts
   vertxbus_reconnect_exponent: 2, // Exponential backoff factor
   vertxbus_randomization_factor: 0.5 // Randomization factor between 0 and 1
};

var eb2 = new EventBus('http://localhost:8080/eventbus', options);
eb2.enableReconnect(true);
// Set up handlers...

Securing the Bridge

If you started a bridge like in the above example without securing it, and attempted to send messages through it you’d find that the messages mysteriously disappeared. What happened to them?

For most applications you probably don’t want client side JavaScript being able to send just any message to any handlers on the server side or to all other browsers.

For example, you may have a service on the event bus which allows data to be accessed or deleted. We don’t want badly behaved or malicious clients being able to delete all the data in your database!

Also, we don’t necessarily want any client to be able to listen in on any event bus address.

To deal with this, a SockJS bridge will by default refuse to let through any messages. It’s up to you to tell the bridge what messages are ok for it to pass through. (There is an exception for reply messages which are always allowed through).

In other words the bridge acts like a kind of firewall which has a default deny-all policy.

Configuring the bridge to tell it what messages it should pass through is easy.

You can specify which matches you want to allow for inbound and outbound traffic using the SockJSBridgeOptions that you pass in when calling bridge.

Each match is a PermittedOptions object:

setAddress

This represents the exact address the message is being sent to. If you want to allow messages based on an exact address you use this field.

setAddressRegex

This is a regular expression that will be matched against the address. If you want to allow messages based on a regular expression you use this field. If the address field is specified this field will be ignored.

setMatch

This allows you to allow messages based on their structure. Any fields in the match must exist in the message with the same values for them to be allowed. This currently only works with JSON messages.

If a message is in-bound (i.e. being sent from client side JavaScript to the server) when it is received Vert.x-Web will look through any inbound permitted matches. If any match, it will be allowed through.

If a message is out-bound (i.e. being sent from the server to client side JavaScript) before it is sent to the client Vert.x-Web will look through any outbound permitted matches. If any match, it will be allowed through.

The actual matching works as follows:

If an address field has been specified then the address must match exactly with the address of the message for it to be considered matched.

If an address field has not been specified and an addressRegex field has been specified then the regular expression in address_re must match with the address of the message for it to be considered matched.

If a match field has been specified, then also the structure of the message must match. Structuring matching works by looking at all the fields and values in the match object and checking they all exist in the actual message body.

Here’s an example:

Router router = Router.router(vertx);

SockJSHandler sockJSHandler = SockJSHandler.create(vertx);


// Let through any messages sent to 'demo.orderMgr' from the client
PermittedOptions inboundPermitted1 = new PermittedOptions()
  .setAddress("demo.orderMgr");

// Allow calls to the address 'demo.persistor' from the client as
// long as the messages have an action field with value 'find'
// and a collection field with value 'albums'
PermittedOptions inboundPermitted2 = new PermittedOptions()
  .setAddress("demo.persistor")
  .setMatch(new JsonObject().put("action", "find")
    .put("collection", "albums"));

// Allow through any message with a field `wibble` with value `foo`.
PermittedOptions inboundPermitted3 = new PermittedOptions()
  .setMatch(new JsonObject().put("wibble", "foo"));

// First let's define what we're going to allow from server -> client

// Let through any messages coming from address 'ticker.mystock'
PermittedOptions outboundPermitted1 = new PermittedOptions()
  .setAddress("ticker.mystock");

// Let through any messages from addresses starting with "news."
// (e.g. news.europe, news.usa, etc)
PermittedOptions outboundPermitted2 = new PermittedOptions()
  .setAddressRegex("news\\..+");

// Let's define what we're going to allow from client -> server
SockJSBridgeOptions options = new SockJSBridgeOptions().
  addInboundPermitted(inboundPermitted1).
  addInboundPermitted(inboundPermitted1).
  addInboundPermitted(inboundPermitted3).
  addOutboundPermitted(outboundPermitted1).
  addOutboundPermitted(outboundPermitted2);

// mount the bridge on the router
router.mountSubRouter("/eventbus", sockJSHandler.bridge(options));

Requiring authorization for messages

The event bus bridge can also be configured to use the Vert.x-Web authorization functionality to require authorization for messages, either in-bound or out-bound on the bridge.

To do this, you can add extra fields to the match described in the previous section that determine what authority is required for the match.

To declare that a specific authority for the logged-in user is required in order to access allow the messages you use the setRequiredAuthority field.

Here’s an example:

PermittedOptions inboundPermitted = new PermittedOptions()
  .setAddress("demo.orderService");

// But only if the user is logged in and has the authority "place_orders"
inboundPermitted.setRequiredAuthority("place_orders");

SockJSBridgeOptions options = new SockJSBridgeOptions()
  .addInboundPermitted(inboundPermitted);

For the user to be authorised they must be first logged in and secondly have the required authority.

To handle the login and actually auth you can configure the normal Vert.x auth handlers. For example:

Router router = Router.router(vertx);

// Let through any messages sent to 'demo.orderService' from the client
PermittedOptions inboundPermitted = new PermittedOptions()
  .setAddress("demo.orderService");

// But only if the user is logged in and has the authority "place_orders"
inboundPermitted.setRequiredAuthority("place_orders");

SockJSHandler sockJSHandler = SockJSHandler.create(vertx);

// Now set up some basic auth handling:

router.route().handler(SessionHandler.create(LocalSessionStore.create(vertx)));

AuthenticationHandler basicAuthHandler = BasicAuthHandler.create(authProvider);

router.route("/eventbus/*").handler(basicAuthHandler);

// mount the bridge on the router
router.mountSubRouter(
  "/eventbus",
  sockJSHandler.bridge(new SockJSBridgeOptions()
    .addInboundPermitted(inboundPermitted)));

Handling event bus bridge events

If you want to be notified when an event occurs on the bridge you can provide a handler when calling bridge.

Whenever an event occurs on the bridge it will be passed to the handler. The event is described by an instance of BridgeEvent.

The event can be one of the following types:

SOCKET_CREATED

This event will occur when a new SockJS socket is created.

SOCKET_IDLE

This event will occur when SockJS socket is on idle for longer period of time than initially configured.

SOCKET_PING

This event will occur when the last ping timestamp is updated for the SockJS socket.

SOCKET_CLOSED

This event will occur when a SockJS socket is closed.

SEND

This event will occur when a message is attempted to be sent from the client to the server.

PUBLISH

This event will occur when a message is attempted to be published from the client to the server.

RECEIVE

This event will occur when a message is attempted to be delivered from the server to the client.

REGISTER

This event will occur when a client attempts to register a handler.

UNREGISTER

This event will occur when a client attempts to unregister a handler.

The event enables you to retrieve the type using type and inspect the raw message of the event using getRawMessage.

The raw message is a JSON object with the following structure:

{
 "type": "send"|"publish"|"receive"|"register"|"unregister",
 "address": the event bus address being sent/published/registered/unregistered
 "body": the body of the message
}

The event is also an instance of Promise. When you are finished handling the event you can complete the promise with true to enable further processing.

If you don’t want the event to be processed you can complete the promise with false. This is a useful feature that enables you to do your own filtering on messages passing through the bridge, or perhaps apply some fine grained authorization or metrics.

Here’s an example where we reject all messages flowing through the bridge if they contain the word "Armadillos".

Router router = Router.router(vertx);

// Let through any messages sent to 'demo.orderMgr' from the client
PermittedOptions inboundPermitted = new PermittedOptions()
  .setAddress("demo.someService");

SockJSHandler sockJSHandler = SockJSHandler.create(vertx);
SockJSBridgeOptions options = new SockJSBridgeOptions()
  .addInboundPermitted(inboundPermitted);

// mount the bridge on the router
router
  .mountSubRouter("/eventbus", sockJSHandler
    .bridge(options, be -> {
      if (be.type() == BridgeEventType.PUBLISH ||
        be.type() == BridgeEventType.RECEIVE) {

        if (be.getRawMessage().getString("body").equals("armadillos")) {
          // Reject it
          be.complete(false);
          return;
        }
      }
      be.complete(true);
    }));

Here’s an example how to configure and handle SOCKET_IDLE bridge event type. Notice setPingTimeout(5000) which says that if ping message doesn’t arrive from client within 5 seconds then the SOCKET_IDLE bridge event would be triggered.

Router router = Router.router(vertx);

// Initialize SockJS handler
SockJSHandler sockJSHandler = SockJSHandler.create(vertx);
SockJSBridgeOptions options = new SockJSBridgeOptions()
  .addInboundPermitted(inboundPermitted)
  .setPingTimeout(5000);

// mount the bridge on the router
router
  .mountSubRouter("/eventbus", sockJSHandler.bridge(options, be -> {
    if (be.type() == BridgeEventType.SOCKET_IDLE) {
      // Do some custom handling...
    }

    be.complete(true);
  }));

In client side JavaScript you use the 'vertx-eventbus.js` library to create connections to the event bus and to send and receive messages:

<script src="https://unpkg.io/[email protected]/dist/sockjs.min.js"></script>
<script src='https://unpkg.io/@vertx/[email protected]/vertx-eventbus.js'></script>

<script>

var eb = new EventBus('http://localhost:8080/eventbus', {"vertxbus_ping_interval": 300000}); // sends ping every 5 minutes.

eb.onopen = function() {

// set a handler to receive a message
eb.registerHandler('some-address', function(error, message) {
  console.log('received a message: ' + JSON.stringify(message));
});

// send a message
eb.send('some-address', {name: 'tim', age: 587});
}

</script>

The first thing the example does is to create a instance of the event bus

var eb = new EventBus('http://localhost:8080/eventbus', {"vertxbus_ping_interval": 300000});

The 2nd parameter to the constructor tells the sockjs library to send ping message every 5 minutes. since the server was configured to expect ping every 5 seconds → SOCKET_IDLE would be triggered on the server.

You can also amend the raw message, e.g. change the body. For messages that are flowing in from the client you can also add headers to the message, here’s an example:

Router router = Router.router(vertx);

// Let through any messages sent to 'demo.orderService' from the client
PermittedOptions inboundPermitted = new PermittedOptions()
  .setAddress("demo.orderService");

SockJSHandler sockJSHandler = SockJSHandler.create(vertx);
SockJSBridgeOptions options = new SockJSBridgeOptions()
  .addInboundPermitted(inboundPermitted);

// mount the bridge on the router
router.mountSubRouter(
  "/eventbus",
  sockJSHandler.bridge(options, be -> {
    if (
      be.type() == BridgeEventType.PUBLISH ||
        be.type() == BridgeEventType.SEND) {

      // Add some headers
      JsonObject headers = new JsonObject()
        .put("header1", "val")
        .put("header2", "val2");

      JsonObject rawMessage = be.getRawMessage();
      rawMessage.put("headers", headers);
      be.setRawMessage(rawMessage);
    }
    be.complete(true);
  }));

CSRF Cross Site Request Forgery

CSRF or sometimes also known as XSRF is a technique by which an unauthorized site can gain your user’s private data. Vert.x-Web includes a handler CSRFHandler that you can use to prevent cross site request forgery requests.

On each get request under this handler a cookie is added to the response with a unique token. Clients are then expected to return this token back in a header. Since cookies are sent it is required that the cookie handler is also present on the router.

When developing non single page applications that rely on the User-Agent to perform the POST action, Headers cannot be specified on HTML Forms. In order to solve this problem the header value will also be checked if and only if no header was present in the Form attributes under the same name as the header, e.g.:

<form action="/submit" method="POST">
<input type="hidden" name="X-XSRF-TOKEN" value="abracadabra">
</form>

It is the responsibility of the user to fill in the right value for the form field. Users who prefer to use an HTML only solution can fill this value by fetching the the token value from the routing context under the key X-XSRF-TOKEN or the header name they have chosen during the instantiation of the CSRFHandler object.

router.route().handler(CSRFHandler.create(vertx, "abracadabra"));
router.route().handler(ctx -> {

});

Note that this handler is session aware. If there is a session available the form parameter or header might be omited during the POST action as it will be read from the session. This also implies that tokens will only be regenerated on session upgrades.

Note, for extra security users are advised to rotate the key that signs the tokens. This can be done online by replacing the handler, or by restarting the application with a new configuration. Clickjacking could still affect applications. If this is a critical application consider setting the header: X-Frame-Options as described in: https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/X-Frame-Options

Using AJAX

When accessing protected routes via ajax both the csrf token will need to be passed in the request. Typically this is done using a request header, as adding a request header can typically be done at a central location easily without payload modification.

The CSRF token is obtained from the server side context under the key X-XSRF-TOKEN (unless you specified a different name). This token needs to be exposed to the client-side, typically by including it in the initial page content. One possibility is to store it in an HTML <meta> tag, where value can then be retrieved at the time of the request by JavaScript.

The following can be included in your view (handlebar example below):

<meta name="csrf-token" content="${X-XSRF-TOKEN}">

The following is an example of using the Fetch API to post to the /process route with the CSRF token from the <meta> tag on the page:

// Read the CSRF token from the <meta> tag
var token = document.querySelector('meta[name="csrf-token"]').getAttribute('content')

// Make a request using the Fetch API
fetch('/process', {
 credentials: 'same-origin', // <-- includes cookies in the request
 headers: {
   'X-XSRF-TOKEN': token // <-- is the csrf token as a header
 },
 method: 'POST',
 body: {
   key: 'value'
 }
})

HSTS Handler

HTTP Strict Transport Security (HSTS) is a web security policy mechanism that helps to protect websites against man-in-the-middle attacks such as protocol downgrade attacks and cookie hijacking. It allows web servers to declare that web browsers (or other complying user agents) should automatically interact with it using only HTTPS connections, which provide Transport Layer Security (TLS/SSL), unlike the insecure HTTP used alone. HSTS is an IETF standards track protocol and is specified in RFC 6797.

This handler will configure the correct header for your application in a single step:

router.route().handler(HSTSHandler.create());

CSP Handler

Content Security Policy (CSP) is an added layer of security that helps to detect and mitigate certain types of attacks, including Cross Site Scripting (XSS) and data injection attacks. These attacks are used for everything from data theft to site defacement to distribution of malware.

CSP is designed to be fully backward compatible. Browsers that don’t support it still work with servers that implement it, and vice-versa: browsers that don’t support CSP simply ignore it, functioning as usual, defaulting to the standard same-origin policy for web content. If the site doesn’t offer the CSP header, browsers likewise use the standard same-origin policy.

router.route().handler(
  CSPHandler.create()
    .addDirective("default-src", "*.trusted.com"));

XFrame Handler

The X-Frame-Options HTTP response header can be used to indicate whether or not a browser should be allowed to render a page in a frame, iframe, embed or object. Sites can use this to avoid click-jacking attacks, by ensuring that their content is not embedded into other sites.

The added security is provided only if the user accessing the document is using a browser that supports X-Frame-Options.

If you specify DENY, not only will attempts to load the page in a frame fail when loaded from other sites, attempts to do so will fail when loaded from the same site. On the other hand, if you specify SAMEORIGIN, you can still use the page in a frame as long as the site including it in a frame is the same as the one serving the page.

This handler will configure the correct header for your application in a single step:

router.route().handler(XFrameHandler.create(XFrameHandler.DENY));

OAuth2AuthHandler Handler

The OAuth2AuthHandler allows quick setup of secure routes using the OAuth2 protocol. This handler simplifies the authCode flow. An example of using it to protect some resource and authenticate with GitHub can be implemented as:

OAuth2Auth authProvider = GithubAuth
  .create(vertx, "CLIENT_ID", "CLIENT_SECRET");

// create a oauth2 handler on our running server
// the second argument is the full url to the
// callback as you entered in your provider management console.
OAuth2AuthHandler oauth2 = OAuth2AuthHandler
  .create(vertx, authProvider, "https://myserver.com/callback");

// setup the callback handler for receiving the GitHub callback
oauth2.setupCallback(router.route());

// protect everything under /protected
router.route("/protected/*").handler(oauth2);
// mount some handler under the protected zone
router
  .route("/protected/somepage")
  .handler(ctx -> ctx.response().end("Welcome to the protected resource!"));

// welcome page
router
  .get("/")
  .handler(ctx -> ctx.response()
    .putHeader("content-type", "text/html")
    .end("Hello<br><a href=\"/protected/somepage\">Protected by Github</a>"));

The OAuth2AuthHandler will setup a proper callback OAuth2 handler so the user does not need to deal with validation of the authority server response. It is quite important to know that authority server responses are only valid once, this means that if a client issues a reload of the callback URL it will be asserted as a invalid request since the validation will fail.

A rule of thumb is once a valid callback is executed issue a client side redirect to a protected resource. This redirect should also create a session cookie (or other session mechanism) so the user is not required to authenticate for every request.

Due to the nature of OAuth2 spec there are slight changes required in order to use other OAuth2 providers but vertx-auth provides you with many out of the box implementations:

However if you’re using an unlisted provider you can still do it using the base API like this:

OAuth2Auth authProvider = OAuth2Auth.create(vertx, new OAuth2Options()
  .setClientID("CLIENT_ID")
  .setClientSecret("CLIENT_SECRET")
  .setFlow(OAuth2FlowType.AUTH_CODE)
  .setSite("https://accounts.google.com")
  .setTokenPath("https://www.googleapis.com/oauth2/v3/token")
  .setAuthorizationPath("/o/oauth2/auth"));

// create a oauth2 handler on our domain: "http://localhost:8080"
OAuth2AuthHandler oauth2 = OAuth2AuthHandler
  .create(vertx, authProvider, "http://localhost:8080");

// these are the scopes
oauth2.withScope("profile");

// setup the callback handler for receiving the Google callback
oauth2.setupCallback(router.get("/callback"));

// protect everything under /protected
router.route("/protected/*").handler(oauth2);
// mount some handler under the protected zone
router
  .route("/protected/somepage")
  .handler(ctx -> ctx.response().end("Welcome to the protected resource!"));

// welcome page
router
  .get("/")
  .handler(ctx -> ctx.response()
    .putHeader("content-type", "text/html")
    .end("Hello<br><a href=\"/protected/somepage\">Protected by Google</a>"));

You will need to provide all the details of your provider manually but the end result is the same.

The handler will pin your application the the configured callback url. The usage is simple as providing the handler a route instance and all setup will be done for you. In a typical use case your provider will ask you what is the callback url to your application, your then enter a url like: https://myserver.com/callback. This is the second argument to the handler now you just need to set it up. To make it easier to the end user all you need to do is call the setupCallback method.

This is how you pin your handler to the server https://myserver.com:8447/callback. Note that the port number is not mandatory for the default values, 80 for http, 443 for https.

OAuth2AuthHandler oauth2 = OAuth2AuthHandler
  .create(vertx, provider, "https://myserver.com:8447/callback");

// now allow the handler to setup the callback url for you
oauth2.setupCallback(router.route());

In the example the route object is created inline by Router.route() however if you want to have full control of the order the handler is called (for example you want it to be called as soon as possible in the chain) you can always create the route object before and pass it as a reference to this method.

A real world example

Up to now you have learned how to use the Oauth2 Handler however you will notice that for each request you will need to authenticate. This is because the handler has no state and there was no state management applied in the examples.

Although having no state is recommended for API facing endpoints, for example, using JWT (we will cover those later) for user facing endpoinst we can keep the authentication result stored in the session. For this to work we would need an application like the following snippet:

OAuth2Auth authProvider =
  GithubAuth
    .create(vertx, "CLIENTID", "CLIENT SECRET");
// We need a user session handler too to make sure
// the user is stored in the session between requests
router.route()
  .handler(SessionHandler.create(LocalSessionStore.create(vertx)));
// we now protect the resource under the path "/protected"
router.route("/protected").handler(
  OAuth2AuthHandler.create(vertx, authProvider)
    // we now configure the oauth2 handler, it will
    // setup the callback handler
    // as expected by your oauth2 provider.
    .setupCallback(router.route("/callback"))
    // for this resource we require that users have
    // the authority to retrieve the user emails
    .withScope("user:email")
);
// Entry point to the application, this will render
// a custom template.
router.get("/").handler(ctx -> ctx.response()
  .putHeader("Content-Type", "text/html")
  .end(
    "<html>\n" +
      "  <body>\n" +
      "    <p>\n" +
      "      Well, hello there!\n" +
      "    </p>\n" +
      "    <p>\n" +
      "      We're going to the protected resource, if there is no\n" +
      "      user in the session we will talk to the GitHub API. Ready?\n" +
      "      <a href=\"/protected\">Click here</a> to begin!</a>\n" +
      "    </p>\n" +
      "    <p>\n" +
      "      <b>If that link doesn't work</b>, remember to provide your\n" +
      "      own <a href=\"https://github.com/settings/applications/new\">\n" +
      "      Client ID</a>!\n" +
      "    </p>\n" +
      "  </body>\n" +
      "</html>"));
// The protected resource
router.get("/protected").handler(ctx -> {
  // at this moment your user object should contain the info
  // from the Oauth2 response, since this is a protected resource
  // as specified above in the handler config the user object is never null
  User user = ctx.user();
  // just dump it to the client for demo purposes
  ctx.response().end(user.toString());
});

Mixing OAuth2 and JWT

Some providers use JWT tokens as access tokens, this is a feature of RFC6750 and can be quite useful when one wants to mix client based authentication and API authorization. For example say that you have a application that provides some protected HTML documents but you also want it to be available for API’s to consume. In this case an API cannot easily perform the redirect handshake required by OAuth2 but can use a Token provided before hand.

This is handled automatically by the handler as long as the provider is configured to support JWTs.

In real life this means that your API’s can access your protected resources using the header Authorization with the value Bearer BASE64_ACCESS_TOKEN.

WebAuthn

Our online existence relies on an outdated and fragile idea of passwords. The password is what lies between a malicious user and your bank account or social media accounts. Passwords are hard to maintain; it’s hard to store them on the server (passwords get stolen). They’re hard to memorize, or not tell to others (phishing attacks).

But there’s a better way! A passwordless world, and it is a standard by W3C and FIDO Alliance running on your browser.

WebAuthn is an API that allows servers to register and authenticate users using public-key cryptography instead of a password, an API that uses cryptography in a user-accessible way with the help of an authentication device, for example a yubikey token, or your mobile phone.

The protocol requires at least the first callback to be mounted on the router:

  1. /webauthn/response the callback used to perform all the validations

  2. /webauthn/login the endpoint to allow users to start the login flow (optional, but without it it won’t be able to login)

  3. /webauthn/register the endpoint to allow users to register a new identificator (optional, if the data is already stored this endpoint is not needed)

An example of a protected application is:

WebAuthn webAuthn = WebAuthn.create(
  vertx,
  new WebAuthnOptions()
    .setRelyingParty(new RelyingParty().setName("Vert.x WebAuthN Demo"))
    // What kind of authentication do you want? do you care?
    // # security keys
    .setAuthenticatorAttachment(AuthenticatorAttachment.CROSS_PLATFORM)
    // # fingerprint
    .setAuthenticatorAttachment(AuthenticatorAttachment.PLATFORM)
    .setUserVerification(UserVerification.REQUIRED))
  // where to load the credentials from?
  .authenticatorFetcher(fetcher)
  // update the state of an authenticator
  .authenticatorUpdater(updater);

// parse the BODY
router.post()
  .handler(BodyHandler.create());
// add a session handler
router.route()
  .handler(SessionHandler
    .create(LocalSessionStore.create(vertx)));

// security handler
WebAuthnHandler webAuthNHandler = WebAuthnHandler.create(webAuthn)
  .setOrigin("https://192.168.178.74.xip.io:8443")
  // required callback
  .setupCallback(router.post("/webauthn/response"))
  // optional register callback
  .setupCredentialsCreateCallback(router.post("/webauthn/register"))
  // optional login callback
  .setupCredentialsGetCallback(router.post("/webauthn/login"));

// secure the remaining routes
router.route().handler(webAuthNHandler);

The application is not secure on the backend side but there is some code needed to be performed on the client side. A bit of boilerplate is required, take these 2 functions:

/**
* Converts PublicKeyCredential into serialised JSON
* @param  {Object} pubKeyCred
* @return {Object}            - JSON encoded publicKeyCredential
*/
var publicKeyCredentialToJSON = (pubKeyCred) => {
 if (pubKeyCred instanceof Array) {
   let arr = [];
   for (let i of pubKeyCred) { arr.push(publicKeyCredentialToJSON(i)) }

   return arr
 }

 if (pubKeyCred instanceof ArrayBuffer) {
   return base64url.encode(pubKeyCred)
 }

 if (pubKeyCred instanceof Object) {
   let obj = {};

   for (let key in pubKeyCred) {
     obj[key] = publicKeyCredentialToJSON(pubKeyCred[key])
   }

   return obj
 }

 return pubKeyCred
};

/**
* Generate secure random buffer
* @param  {Number} len - Length of the buffer (default 32 bytes)
* @return {Uint8Array} - random string
*/
var generateRandomBuffer = (len) => {
 len = len || 32;

 let randomBuffer = new Uint8Array(len);
 window.crypto.getRandomValues(randomBuffer);

 return randomBuffer
};

/**
* Decodes arrayBuffer required fields.
*/
var preformatMakeCredReq = (makeCredReq) => {
 makeCredReq.challenge = base64url.decode(makeCredReq.challenge);
 makeCredReq.user.id = base64url.decode(makeCredReq.user.id);

 return makeCredReq
};

/**
* Decodes arrayBuffer required fields.
*/
var preformatGetAssertReq = (getAssert) => {
 getAssert.challenge = base64url.decode(getAssert.challenge);

 for (let allowCred of getAssert.allowCredentials) {
   allowCred.id = base64url.decode(allowCred.id)
 }

 return getAssert
};

These functions will help you with the interaction with the server. Nothing more. Let’s start by login in a user:

// using the functions defined before...
getGetAssertionChallenge({name: 'your-user-name'})
.then((response) => {
 // base64 must be decoded to a JavaScript Buffer
 let publicKey = preformatGetAssertReq(response);
 // the response is then passed to the browser
 // to generate an assertion by interacting with your token/phone/etc...
 return navigator.credentials.get({publicKey})
})
.then((response) => {
 // convert response buffers to base64 and json
 let getAssertionResponse = publicKeyCredentialToJSON(response);
 // send information to server
 return sendWebAuthnResponse(getAssertionResponse)
})
.then((response) => {
 // success!
 alert('Login success')
})
.catch((error) => alert(error));

// utility functions

let sendWebAuthnResponse = (body) => {
 return fetch('/webauthn/response', {
   method: 'POST',
   credentials: 'include',
   headers: {
     'Content-Type': 'application/json'
   },
   body: JSON.stringify(body)
 })
   .then(response => {
     if (!response.ok) {
       throw new Error(`Server responded with error: ${response.statusText}`);
     }
     return response;
   })
};

let getGetAssertionChallenge = (formBody) => {
 return fetch('/webauthn/login', {
   method: 'POST',
   credentials: 'include',
   headers: {
     'Content-Type': 'application/json'
   },
   body: JSON.stringify(formBody)
 })
   .then(response => {
     if (!response.ok) {
       throw new Error(`Server responded with error: ${response.statusText}`);
     }
     return response;
   })
   .then((response) => response.json())
};

The example above already covered 66% of the API, 2 out fo 3 endpoints where covered. The final endpoint is the user registration. User registration is the process of enrolling a new key into the server credential store and map to a user, and of course on the client side a private key was created and associated with the server but this key never left the hardware token or your phone security chip.

To register a user and reusing most of the functions already defined above:

/* Handle for register form submission */
getMakeCredentialsChallenge({name: 'myalias', displayName: 'Paulo Lopes'})
.then((response) => {
 // convert challenge & id to buffer and perform register
 let publicKey = preformatMakeCredReq(response);
 // create a new secure key pair
 return navigator.credentials.create({publicKey})
})
.then((response) => {
 // convert response from buffer to json
 let makeCredResponse = window.publicKeyCredentialToJSON(response);
 // send to server to confirm the user
 return sendWebAuthnResponse(makeCredResponse)
})
.then((response) => {
 alert('Registration completed')
})
.catch((error) => alert(error));

// utility functions

let getMakeCredentialsChallenge = (formBody) => {
 return fetch('/webauthn/register', {
   method: 'POST',
   credentials: 'include',
   headers: {
     'Content-Type': 'application/json'
   },
   body: JSON.stringify(formBody)
 })
   .then(response => {
     if (!response.ok) {
       throw new Error(`Server responded with error: ${response.statusText}`);
     }
     return response;
   })
   .then((response) => response.json())
};
Warning
Due to the secure nature of the API browsers will not allow you to use this API on plain text HTTP. All requests must go over HTTPS.
Warning
WebAuthN requires HTTPS with a working TLS certificate, you can use self signed certiticates too during development.

Handling HTTP Method overriding

Many companies and other services impose limitations to the REST HTTP methods they allow to the outside world. Some are lax by allowing any method, most are restricted by allowing only a small-but-decent set and some only allow GET and POST. The reasons for such restritions varies: browser or client limitations or a really strict corporate firewalls. Web services with only GET and POST does not express well the REST ideology. PUT, DELETE, OPTIONS, among others are quite useful to specify what do to to a resource. To deal with it, it was created the X-HTTP-METHOD-OVERRIDE HTTP header as a workaround.

By sending a request with GET/POST and which method the request should truly process inside the X-HTTP-METHOD-OVERRIDE HTTP header, the server should recognize the header and redirect to the appropriate method.

Vert.x allows one to do so, simply by:

router.route().handler(MethodOverrideHandler.create());

router.route(HttpMethod.GET, "/").handler(ctx -> {
  // do GET stuff...
});

router.route(HttpMethod.POST, "/").handler(ctx -> {
  // do POST stuff...
});

Since it will redirect the request, it is wise to avoid firing request handlers unnecessarily, so it is better to add the MethodOverrideHandler as the first handler.

Also, a word of caution: THIS MIGHT BECOME AN ATTACK VECTOR FOR ILL-INTENTIONED PEOPLE!

To mitigate such a problem, the MethodOverrideHandler comes with a Safe-Downgrade Policy by default. This policy says that the method contained in X-HTTP-METHOD-OVERRIDE can override the original one if:

  • the overriding method is idempotent; or

  • the overriding method is safe and the method to be overrided is NOT idempotent; or

  • the method to be overrided is not safe.

Although we do NOT recommend, Vert.x will not force you to anything. If it is your desire to allow any overriding, then:

router.route().handler(MethodOverrideHandler.create(false));

router.route(HttpMethod.GET, "/").handler(ctx -> {
  // do GET stuff...
});

router.route(HttpMethod.POST, "/").handler(ctx -> {
  // do POST stuff...
});