Package io.vertx.rxjava3.ext.web

Class Route

  • public class Route
extends Object
    A route is a holder for a set of criteria which determine whether an HTTP request or failure should be routed to a handler.

    NOTE: This class has been automatically generated from the original non RX-ified interface using Vert.x codegen.

    • Field Detail

      • __TYPE_ARG

        public static final io.vertx.lang.rx.TypeArg<Route> __TYPE_ARG

    • Constructor Detail

      • Route

        public Route​(Route delegate)

      • Route

        public Route​(Object delegate)

    • Method Detail

      • hashCode

        public int hashCode()
        Overrides:
        hashCode in class Object

      • getDelegate

        public Route getDelegate()

      • method

        public Route method​(HttpMethod method)
        Add an HTTP method for this route. By default a route will match all HTTP methods. If any are specified then the route will only match any of the specified methods
        Parameters:
        method - the HTTP method to add
        Returns:
        a reference to this, so the API can be used fluently

      • path

        public Route path​(String path)
        Set the path prefix for this route. If set then this route will only match request URI paths which start with this path prefix. Only a single path or path regex can be set for a route.
        Parameters:
        path - the path prefix
        Returns:
        a reference to this, so the API can be used fluently

      • pathRegex

        public Route pathRegex​(String path)
        Set the path prefix as a regular expression. If set then this route will only match request URI paths, the beginning of which match the regex. Only a single path or path regex can be set for a route.
        Parameters:
        path - the path regex
        Returns:
        a reference to this, so the API can be used fluently

      • produces

        public Route produces​(String contentType)
        Add a content type produced by this route. Used for content based routing.
        Parameters:
        contentType - the content type
        Returns:
        a reference to this, so the API can be used fluently

      • consumes

        public Route consumes​(String contentType)
        Add a content type consumed by this route. Used for content based routing.
        Parameters:
        contentType - the content type
        Returns:
        a reference to this, so the API can be used fluently

      • virtualHost

        public Route virtualHost​(String hostnamePattern)
        Add a virtual host filter for this route.
        Parameters:
        hostnamePattern - the hostname pattern that should match Host header of the requests
        Returns:
        a reference to this, so the API can be used fluently

      • order

        public Route order​(int order)
        Specify the order for this route. The router tests routes in that order.
        Parameters:
        order - the order
        Returns:
        a reference to this, so the API can be used fluently

      • last

        public Route last()
        Specify this is the last route for the router.
        Returns:
        a reference to this, so the API can be used fluently

      • handler

        public Route handler​(Handler<RoutingContext> requestHandler)
        Append a request handler to the route handlers list. The router routes requests to handlers depending on whether the various criteria such as method, path, etc match. When method, path, etc are the same for different routes, You should add multiple handlers to the same route object rather than creating two different routes objects with one handler for route
        Parameters:
        requestHandler - the request handler
        Returns:
        a reference to this, so the API can be used fluently

      • subRouter

        public Route subRouter​(Router subRouter)
        Use a (sub) Router as a handler. There are several requirements to be fulfilled for this to be accepted.
        • The route path must end with a wild card
        • Parameters are allowed but full regex patterns not
        • No other handler can be registered before or after this call (but they can on a new route object for the same path)
        • Only 1 router per path object
        Parameters:
        subRouter - the router to add
        Returns:
        a reference to this, so the API can be used fluently

      • getSubRouter

        public Router getSubRouter()
        Returns:
        the sub router if this route acts as a sub router, null if it does not.

      • blockingHandler

        public Route blockingHandler​(Handler<RoutingContext> requestHandler,
                             boolean ordered)
        Specify a blocking request handler for the route. This method works just like handler(io.vertx.core.Handler<io.vertx.rxjava3.ext.web.RoutingContext>) excepted that it will run the blocking handler on a worker thread so that it won't block the event loop. Note that it's safe to call context.next() from the blocking handler as it will be executed on the event loop context (and not on the worker thread.

        If the blocking handler is ordered it means that any blocking handlers for the same context are never executed concurrently but always in the order they were called. The default value of ordered is true. If you do not want this behaviour and don't mind if your blocking handlers are executed in parallel you can set ordered to false.

        Parameters:
        requestHandler - the blocking request handler
        ordered - if true handlers are executed in sequence, otherwise are run in parallel
        Returns:
        a reference to this, so the API can be used fluently

      • failureHandler

        public Route failureHandler​(Handler<RoutingContext> failureHandler)
        Append a failure handler to the route failure handlers list. The router routes failures to failurehandlers depending on whether the various criteria such as method, path, etc match. When method, path, etc are the same for different routes, You should add multiple failure handlers to the same route object rather than creating two different routes objects with one failure handler for route
        Parameters:
        failureHandler - the request handler
        Returns:
        a reference to this, so the API can be used fluently

      • remove

        public Route remove()
        Remove this route from the router
        Returns:
        a reference to this, so the API can be used fluently

      • disable

        public Route disable()
        Disable this route. While disabled the router will not route any requests or failures to it.
        Returns:
        a reference to this, so the API can be used fluently

      • enable

        public Route enable()
        Enable this route.
        Returns:
        a reference to this, so the API can be used fluently

      • useNormalizedPath

        public Route useNormalizedPath​(boolean useNormalizedPath)
        If true then the normalized request path will be used when routing (e.g. removing duplicate /) Default is true
        Parameters:
        useNormalizedPath - use normalized path for routing?
        Returns:
        a reference to this, so the API can be used fluently

      • getMetadata

        public <T> T getMetadata​(String key)
        Get some data from metadata.
        Parameters:
        key - the key for the metadata
        Returns:
        the data

      • getPath

        public String getPath()
        Returns:
        the path prefix (if any) for this route

      • isRegexPath

        public boolean isRegexPath()
        Returns true of the path is a regular expression, this includes expression paths.
        Returns:
        true if backed by a pattern.

      • isExactPath

        public boolean isExactPath()
        Returns true of the path doesn't end with a wildcard * or is null. Regular expression paths are always assumed to be exact.
        Returns:
        true if the path is exact.

      • methods

        public Set<HttpMethod> methods()
        Returns:
        the http methods accepted by this route

      • setRegexGroupsNames

        public Route setRegexGroupsNames​(List<String> groups)
        When you add a new route with a regular expression, you can add named capture groups for parameters.
        However, if you need more complex parameters names (like "param_name"), you can add parameters names with this function. You have to name capture groups in regex with names: "p0", "p1", "p2", ...

        For example: If you declare route with regex \/(?[a-z]*)\/(?[a-z]*) and group names ["param_a", "param-b"] for uri /hello/world you receive inside pathParams() the parameter param_a = "hello"
        Parameters:
        groups - group names
        Returns:
        a reference to this, so the API can be used fluently

      • setName

        public Route setName​(String name)
        Giving a name to a route will provide this name as metadata to requests matching this route. This metadata is used by metrics and is meant to group requests with different URI paths (due to parameters) by a common identifier, for example "/resource/:resourceID" common name
        Parameters:
        name - The name of the route.
        Returns:
        a reference to this, so the API can be used fluently

      • getName

        public String getName()
        Returns:
        the name of the route. If not given explicitly, the path or the pattern or null is returned (in that order)

      • respond

        public <T> Route respond​(java.util.function.Function<RoutingContext,​Maybe<T>> function)
        Append a function request handler to the route handlers list. The function expects to receive the routing context and users are expected to return a . The use of this functional interface allows users to quickly link the responses from other vert.x APIs or clients directly to a handler. If the context response has been ended, for example, RoutingContext.end(java.lang.String) has been called, then nothing shall happen. For the remaining cases, the following rules apply:
        1. When body is null then the status code of the response shall be 204 (NO CONTENT)
        2. When body is of type and the Content-Type isn't set then the Content-Type shall be application/octet-stream
        3. When body is of type String and the Content-Type isn't set then the Content-Type shall be text/html
        4. Otherwise the response of the future is then passed to the method RoutingContext.json(java.lang.Object) to perform a JSON serialization of the result
        Internally the function is wrapped as a handler that handles error cases for the user too. For example, if the function throws an exception the error will be catched and a proper error will be propagated throw the router. Also if the same happens while encoding the response, errors are catched and propagated to the router.
        Parameters:
        function - the request handler function
        Returns:
        a reference to this, so the API can be used fluently

      • putMetadata

        public Route putMetadata​(String key,
                         Object value)
        Put metadata to this route. Used for saved extra data. Remove the existing value if value is null.
        Parameters:
        key - the metadata of key
        value - the metadata of value
        Returns:
        a reference to this, so the API can be used fluently

      • metadata

        public Map<String,​Object> metadata()
        Returns:
        the metadata of this route, never returns null.

      • newInstance

        public static Route newInstance​(Route arg)