public interface WebSocketBase extends ReadStream<Buffer>, WriteStream<Buffer>
| Modifier and Type | Method and Description |
|---|---|
String |
binaryHandlerID()
When a
WebSocket is created, it may register an event handler with the event bus - the ID of that
handler is given by this method. |
WebSocketBase |
binaryMessageHandler(Handler<Buffer> handler)
Set a binary message handler on the connection.
|
Completable |
close()
Same as
close() but with an handler called when the operation completes |
Completable |
close(short statusCode)
Same as
close() but with an handler called when the operation completes |
Completable |
close(short statusCode,
String reason)
Same as
close() but with an handler called when the operation completes |
WebSocketBase |
closeHandler(Handler<Void> handler)
Set a close handler.
|
String |
closeReason()
Returns the close reason message from the remote endpoint or
null when not yet received. |
Short |
closeStatusCode()
Returns the close status code received from the remote endpoint or
null when not yet received. |
WebSocketBase |
drainHandler(Handler<Void> handler)
Set a drain handler on the stream.
|
Completable |
end()
Calls
close() |
Completable |
end(Buffer data)
Same as but with an
handler called when the operation completes |
WebSocketBase |
endHandler(Handler<Void> endHandler)
Set an end handler.
|
WebSocketBase |
exceptionHandler(Handler<Throwable> handler)
Set an exception handler on the read stream.
|
WebSocketBase |
fetch(long amount)
Fetch the specified
amount of elements. |
WebSocketBase |
frameHandler(Handler<WebSocketFrame> handler)
Set a frame handler on the connection.
|
WebSocketBase |
getDelegate() |
WebSocketBase |
handler(Handler<Buffer> handler)
Set a data handler.
|
MultiMap |
headers()
Returns the HTTP headers when the WebSocket is first obtained in the handler.
|
boolean |
isClosed() |
boolean |
isSsl() |
SocketAddress |
localAddress() |
static WebSocketBase |
newInstance(WebSocketBase arg) |
WebSocketBase |
pause()
Pause the
ReadStream, it sets the buffer in fetch mode and clears the actual demand. |
Pipe<Buffer> |
pipe()
Pause this stream and return a to transfer the elements of this stream to a destination .
|
Completable |
pipeTo(WriteStream<Buffer> dst)
Pipe this
ReadStream to the WriteStream. |
WebSocketBase |
pongHandler(Handler<Buffer> handler)
Set a pong frame handler on the connection.
|
SocketAddress |
remoteAddress() |
WebSocketBase |
resume()
Resume reading, and sets the buffer in
flowing mode. |
Completable |
rxClose()
Same as
close() but with an handler called when the operation completes |
Completable |
rxClose(short statusCode)
Same as
close() but with an handler called when the operation completes |
Completable |
rxClose(short statusCode,
String reason)
Same as
close() but with an handler called when the operation completes |
Completable |
rxEnd()
Calls
close() |
Completable |
rxEnd(Buffer data)
Same as but with an
handler called when the operation completes |
Completable |
rxPipeTo(WriteStream<Buffer> dst)
Pipe this
ReadStream to the WriteStream. |
Completable |
rxWrite(Buffer data)
Same as but with an
handler called when the operation completes |
Completable |
rxWriteBinaryMessage(Buffer data)
Same as
writeBinaryMessage(io.vertx.rxjava3.core.buffer.Buffer) but with an handler called when the operation completes |
Completable |
rxWriteFinalBinaryFrame(Buffer data)
Same as
writeFinalBinaryFrame(io.vertx.rxjava3.core.buffer.Buffer) but with an handler called when the operation completes |
Completable |
rxWriteFinalTextFrame(String text)
Same as
writeFinalTextFrame(java.lang.String) but with an handler called when the operation completes |
Completable |
rxWriteFrame(WebSocketFrame frame)
Same as
writeFrame(io.vertx.rxjava3.core.http.WebSocketFrame) but with an handler called when the operation completes |
Completable |
rxWritePing(Buffer data)
Writes a ping frame to the connection.
|
Completable |
rxWritePong(Buffer data)
Writes a pong frame to the connection.
|
Completable |
rxWriteTextMessage(String text)
Same as
writeTextMessage(java.lang.String) but with an handler called when the operation completes |
WebSocketBase |
setWriteQueueMaxSize(int maxSize)
Set the maximum size of the write queue to
maxSize. |
String |
subProtocol()
Returns the WebSocket sub protocol selected by the WebSocket handshake.
|
String |
textHandlerID()
When a
WebSocket is created, it may register an event handler with the eventbus, the ID of that
handler is given by textHandlerID. |
WebSocketBase |
textMessageHandler(Handler<String> handler)
Set a text message handler on the connection.
|
Completable |
write(Buffer data)
Same as but with an
handler called when the operation completes |
Completable |
writeBinaryMessage(Buffer data)
Same as
writeBinaryMessage(io.vertx.rxjava3.core.buffer.Buffer) but with an handler called when the operation completes |
Completable |
writeFinalBinaryFrame(Buffer data)
Same as
writeFinalBinaryFrame(io.vertx.rxjava3.core.buffer.Buffer) but with an handler called when the operation completes |
Completable |
writeFinalTextFrame(String text)
Same as
writeFinalTextFrame(java.lang.String) but with an handler called when the operation completes |
Completable |
writeFrame(WebSocketFrame frame)
Same as
writeFrame(io.vertx.rxjava3.core.http.WebSocketFrame) but with an handler called when the operation completes |
Completable |
writePing(Buffer data)
Writes a ping frame to the connection.
|
Completable |
writePong(Buffer data)
Writes a pong frame to the connection.
|
boolean |
writeQueueFull()
This will return
true if there are more bytes in the write queue than the value set using setWriteQueueMaxSize(int) |
Completable |
writeTextMessage(String text)
Same as
writeTextMessage(java.lang.String) but with an handler called when the operation completes |
newInstance, newInstance, toFlowable, toObservablenewInstance, newInstance, toObserver, toSubscribernewInstanceWebSocketBase getDelegate()
getDelegate in interface ReadStream<Buffer>getDelegate in interface StreamBasegetDelegate in interface WriteStream<Buffer>Completable write(Buffer data)
handler called when the operation completeswrite in interface WriteStream<Buffer>data - Completable rxWrite(Buffer data)
handler called when the operation completesrxWrite in interface WriteStream<Buffer>data - Completable end(Buffer data)
handler called when the operation completesend in interface WriteStream<Buffer>data - Completable rxEnd(Buffer data)
handler called when the operation completesrxEnd in interface WriteStream<Buffer>data - boolean writeQueueFull()
true if there are more bytes in the write queue than the value set using setWriteQueueMaxSize(int)writeQueueFull in interface WriteStream<Buffer>true if write queue is fullPipe<Buffer> pipe()
WriteStream.pipe in interface ReadStream<Buffer>Completable pipeTo(WriteStream<Buffer> dst)
ReadStream to the WriteStream.
Elements emitted by this stream will be written to the write stream until this stream ends or fails.
Once this stream has ended or failed, the write stream will be ended and the handler will be
called with the result.
pipeTo in interface ReadStream<Buffer>dst - the destination write streamCompletable rxPipeTo(WriteStream<Buffer> dst)
ReadStream to the WriteStream.
Elements emitted by this stream will be written to the write stream until this stream ends or fails.
Once this stream has ended or failed, the write stream will be ended and the handler will be
called with the result.
rxPipeTo in interface ReadStream<Buffer>dst - the destination write streamWebSocketBase exceptionHandler(Handler<Throwable> handler)
ReadStreamexceptionHandler in interface ReadStream<Buffer>exceptionHandler in interface StreamBaseexceptionHandler in interface WriteStream<Buffer>handler - the exception handlerWebSocketBase handler(Handler<Buffer> handler)
ReadStreamhandler in interface ReadStream<Buffer>WebSocketBase pause()
ReadStreamReadStream, it sets the buffer in fetch mode and clears the actual demand.
While it's paused, no data will be sent to the data handler.
pause in interface ReadStream<Buffer>WebSocketBase resume()
ReadStreamflowing mode.
If the ReadStream has been paused, reading will recommence on it.resume in interface ReadStream<Buffer>WebSocketBase fetch(long amount)
ReadStreamamount of elements. If the ReadStream has been paused, reading will
recommence with the specified amount of items, otherwise the specified amount will
be added to the current stream demand.fetch in interface ReadStream<Buffer>WebSocketBase endHandler(Handler<Void> endHandler)
ReadStreamendHandler in interface ReadStream<Buffer>WebSocketBase setWriteQueueMaxSize(int maxSize)
WriteStreammaxSize. You will still be able to write to the stream even
if there is more than maxSize items in the write queue. This is used as an indicator by classes such as
Pipe to provide flow control.
The value is defined by the implementation of the stream, e.g in bytes for a
NetSocket, etc...setWriteQueueMaxSize in interface WriteStream<Buffer>maxSize - the max size of the write streamWebSocketBase drainHandler(Handler<Void> handler)
WriteStreamPipe for an example of this being used.
The stream implementation defines when the drain handler, for example it could be when the queue size has been
reduced to maxSize / 2.
drainHandler in interface WriteStream<Buffer>handler - the handlerString binaryHandlerID()
WebSocket is created, it may register an event handler with the event bus - the ID of that
handler is given by this method.
By default, no handler is registered, the feature must be enabled via WebSocketConnectOptions or HttpServerOptions.
Given this ID, a different event loop can send a binary frame to that event handler using the event bus and that buffer will be received by this instance in its own event loop and written to the underlying connection. This allows you to write data to other WebSockets which are owned by different event loops.
String textHandlerID()
WebSocket is created, it may register an event handler with the eventbus, the ID of that
handler is given by textHandlerID.
By default, no handler is registered, the feature must be enabled via WebSocketConnectOptions or HttpServerOptions.
Given this ID, a different event loop can send a text frame to that event handler using the event bus and that buffer will be received by this instance in its own event loop and written to the underlying connection. This allows you to write data to other WebSockets which are owned by different event loops.
String subProtocol()
null when the handler receives the WebSocket callback as the
handshake will not be completed yet.Short closeStatusCode()
null when not yet received.String closeReason()
null when not yet received.MultiMap headers()
null on subsequent interactions.Completable writeFrame(WebSocketFrame frame)
writeFrame(io.vertx.rxjava3.core.http.WebSocketFrame) but with an handler called when the operation completesframe - Completable rxWriteFrame(WebSocketFrame frame)
writeFrame(io.vertx.rxjava3.core.http.WebSocketFrame) but with an handler called when the operation completesframe - Completable writeFinalTextFrame(String text)
writeFinalTextFrame(java.lang.String) but with an handler called when the operation completestext - Completable rxWriteFinalTextFrame(String text)
writeFinalTextFrame(java.lang.String) but with an handler called when the operation completestext - Completable writeFinalBinaryFrame(Buffer data)
writeFinalBinaryFrame(io.vertx.rxjava3.core.buffer.Buffer) but with an handler called when the operation completesdata - Completable rxWriteFinalBinaryFrame(Buffer data)
writeFinalBinaryFrame(io.vertx.rxjava3.core.buffer.Buffer) but with an handler called when the operation completesdata - Completable writeBinaryMessage(Buffer data)
writeBinaryMessage(io.vertx.rxjava3.core.buffer.Buffer) but with an handler called when the operation completesdata - Completable rxWriteBinaryMessage(Buffer data)
writeBinaryMessage(io.vertx.rxjava3.core.buffer.Buffer) but with an handler called when the operation completesdata - Completable writeTextMessage(String text)
writeTextMessage(java.lang.String) but with an handler called when the operation completestext - Completable rxWriteTextMessage(String text)
writeTextMessage(java.lang.String) but with an handler called when the operation completestext - Completable writePing(Buffer data)
This method should not be used to write application data and should only be used for implementing a keep alive or to ensure the client is still responsive, see RFC 6455 Section section 5.5.2.
There is no handler for ping frames because RFC 6455 clearly states that the only response to a ping frame is a pong frame with identical contents.
data - the data to write, may be at most 125 bytesCompletable rxWritePing(Buffer data)
This method should not be used to write application data and should only be used for implementing a keep alive or to ensure the client is still responsive, see RFC 6455 Section section 5.5.2.
There is no handler for ping frames because RFC 6455 clearly states that the only response to a ping frame is a pong frame with identical contents.
data - the data to write, may be at most 125 bytesCompletable writePong(Buffer data)
This method should not be used to write application data and should only be used for implementing a keep alive or to ensure the client is still responsive, see RFC 6455 section 5.5.2.
There is no need to manually write a pong frame, as the server and client both handle responding to a ping from with a pong from automatically and this is exposed to users. RFC 6455 section 5.5.3 states that pongs may be sent unsolicited in order to implement a one way heartbeat.
data - the data to write, may be at most 125 bytesCompletable rxWritePong(Buffer data)
This method should not be used to write application data and should only be used for implementing a keep alive or to ensure the client is still responsive, see RFC 6455 section 5.5.2.
There is no need to manually write a pong frame, as the server and client both handle responding to a ping from with a pong from automatically and this is exposed to users. RFC 6455 section 5.5.3 states that pongs may be sent unsolicited in order to implement a one way heartbeat.
data - the data to write, may be at most 125 bytesWebSocketBase closeHandler(Handler<Void> handler)
closeStatusCode() will return the status code and closeReason() will return the reason.handler - the handlerWebSocketBase frameHandler(Handler<WebSocketFrame> handler)
handler - the handlerWebSocketBase textMessageHandler(Handler<String> handler)
binaryMessageHandler(io.vertx.core.Handler<io.vertx.rxjava3.core.buffer.Buffer>), but the buffer will be converted to a String firsthandler - the handlerWebSocketBase binaryMessageHandler(Handler<Buffer> handler)
handler(io.vertx.core.Handler<io.vertx.rxjava3.core.buffer.Buffer>)
except that if a message comes into the socket in multiple frames, the data from the frames will be aggregated
into a single buffer before calling the handler (using WebSocketFrame.isFinal() to find the boundaries).handler - the handlerWebSocketBase pongHandler(Handler<Buffer> handler)
Pong frames may be at most 125 bytes (octets).
There is no ping handler since ping frames should immediately be responded to with a pong frame with identical content
Pong frames may be received unsolicited.
handler - the handlerCompletable end()
close()end in interface WriteStream<Buffer>Completable rxEnd()
close()rxEnd in interface WriteStream<Buffer>Completable close()
close() but with an handler called when the operation completesCompletable rxClose()
close() but with an handler called when the operation completesCompletable close(short statusCode)
close() but with an handler called when the operation completesstatusCode - Completable rxClose(short statusCode)
close() but with an handler called when the operation completesstatusCode - Completable close(short statusCode, String reason)
close() but with an handler called when the operation completesstatusCode - reason - Completable rxClose(short statusCode, String reason)
close() but with an handler called when the operation completesstatusCode - reason - SocketAddress remoteAddress()
null (e.g a server bound on a domain socket). If useProxyProtocol is set to true, the address returned will be of the actual connecting client.SocketAddress localAddress()
null (e.g a server bound on a domain socket) If useProxyProtocol is set to true, the address returned will be of the proxy.boolean isSsl()
HttpConnection is encrypted via SSL/TLS.boolean isClosed()
true if the WebSocket is closedstatic WebSocketBase newInstance(WebSocketBase arg)
Copyright © 2024 Eclipse. All rights reserved.